The DOI matches its Crossref record; 73 of the 73 references it cites were found in a registry or an index.
A New Model for Determining Weight Coefficients of Criteria in MCDM Models: Full Consistency Method (FUCOM)
Open accessAbstract
In this paper, a new multi-criteria problem solving method—the Full Consistency Method (FUCOM)—is proposed. The model implies the definition of two groups of constraints that need to satisfy the optimal values of weight coefficients. The first group of constraints is the condition that the relations of the weight coefficients of criteria should be equal to the comparative priorities of the criteria. The second group of constraints is defined on the basis of the conditions of mathematical transitivity. After defining the constraints and solving the model, in addition to optimal weight values, a deviation from full consistency (DFC) is obtained. The degree of DFC is the deviation value of the obtained weight coefficients from the estimated comparative priorities of the criteria. In addition, DFC is also the reliability confirmation of the obtained weights of criteria. In order to illustrate the proposed model and evaluate its performance, FUCOM was tested on several numerical examples from the literature. The model validation was performed by comparing it with the other subjective models (the Best Worst Method (BWM) and Analytic Hierarchy Process (AHP)), based on the pairwise comparisons of the criteria and the validation of the results by using DFC. The results show that FUCOM provides better results than the BWM and AHP methods, when the relation between consistency and the required number of the comparisons of the criteria are taken into consideration. The main advantages of FUCOM in relation to the existing multi-criteria decision-making (MCDM) methods are as follows: (1) a significantly smaller number of pairwise comparisons (only n − 1), (2) a consistent pairwise comparison of criteria, and (3) the calculation of the reliable values of criteria weight coefficients, which contribute to rational judgment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Best-worst multi-criteria decision-making method
Rezaei, J. (2015) · Omega · doi:10.1016/j.omega.2014.11.009 · Cited by 4,333
Determining objective weights in multiple criteria problems: The critic method
Diakoulaki, D., Mavrotas, G., & Papayannakis, L. (1995) · Computers & Operations Research · doi:10.1016/0305-0548(94)00059-h · Cited by 3,413
Models, Methods, Concepts & Applications of the Analytic Hierarchy Process
Saaty, T. L., & Vargas, L. G. (2012) · International Series in Operations Research & Management Science · doi:10.1007/978-1-4614-3597-6 · Cited by 2,210
Best-worst multi-criteria decision-making method: Some properties and a linear model
Rezaei, J. (2016) · Omega · doi:10.1016/j.omega.2015.12.001 · Cited by 1,720
Keršulienė, V., Zavadskas, E. K., & Turskis, Z. (2010) · Journal of Business Economics and Management · doi:10.3846/jbem.2010.12 · Cited by 1,555
SMARTS and SMARTER: Improved Simple Methods for Multiattribute Utility Measurement
Edwards, W., & Barron, F. H. (1994) · Organizational Behavior and Human Decision Processes · doi:10.1006/obhd.1994.1087 · Cited by 1,117
Rezaei, J., Nispeling, T., Sarkis, J., & Tavasszy, L. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.06.125 · Cited by 577
Assessing the social sustainability of supply chains using Best Worst Method
Badri Ahmadi, H., Kusi-Sarpong, S., & Rezaei, J. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.07.020 · Cited by 548
Gupta, H., & Barua, M. K. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.03.125 · Cited by 520
Hong, H., Panahi, M., Shirzadi, A., Ma, T., Liu, J., Zhu, A.-X., Chen, W., Kougias, I., & Kazakis, N. (2018) · Science of The Total Environment · doi:10.1016/j.scitotenv.2017.10.114 · Cited by 432
Integrated QFD-MCDM framework for green supplier selection
Yazdani, M., Chatterjee, P., Zavadskas, E. K., & Hashemkhani Zolfani, S. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.10.095 · Cited by 419
Behavioral influences on weight judgments in multiattribute decision making
Weber, M., & Borcherding, K. (1993) · European Journal of Operational Research · doi:10.1016/0377-2217(93)90318-h · Cited by 393
Linking supplier development to supplier segmentation using Best Worst Method
Rezaei, J., Wang, J., & Tavasszy, L. (2015) · Expert Systems with Applications · doi:10.1016/j.eswa.2015.07.073 · Cited by 388
Pamučar, D., Petrović, I., & Ćirović, G. (2018) · Expert Systems with Applications · doi:10.1016/j.eswa.2017.08.042 · Cited by 349
Self-citationZarbakhshnia, N., Soleimani, H., & Ghaderi, . (2018) · Applied Soft Computing · doi:10.1016/j.asoc.2018.01.023 · Cited by 327
Şener, Ş., Sener, E., & Karagüzel, R. (2011) · Environmental Monitoring and Assessment · doi:10.1007/s10661-010-1403-x · Cited by 325
Gupta, H., & Barua, M. K. (2016) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2016.03.028 · Cited by 302
Quality assessment of airline baggage handling systems using SERVQUAL and BWM
Rezaei, J., Kothadiya, O., Tavasszy, L., & Kroesen, M. (2018) · Tourism Management · doi:10.1016/j.tourman.2017.11.009 · Cited by 288
Hybrid multiple criteria decision-making methods: a review of applications for sustainability issues
Zavadskas, E. K., Govindan, K., Antucheviciene, J., & Turskis, Z. (2016) · Economic Research-Ekonomska Istraživanja · doi:10.1080/1331677x.2016.1237302 · Cited by 282
An integrated AHP and VIKOR for design concept evaluation based on rough number
Zhu, G.-N., Hu, J., Qi, J., Gu, C.-C., & Peng, Y.-H. (2015) · Advanced Engineering Informatics · doi:10.1016/j.aei.2015.01.010 · Cited by 270
A military airport location selection by AHP integrated PROMETHEE and VIKOR methods
Sennaroglu, B., & Varlik Celebi, G. (2018) · Transportation Research Part D: Transport and Environment · doi:10.1016/j.trd.2017.12.022 · Cited by 255
Govindan, K., & Chaudhuri, A. (2016) · Transportation Research Part E Logistics and Transportation Review · doi:10.1016/j.tre.2015.11.010 · Cited by 254
Evaluating firms’ R&D performance using best worst method
Salimi, N., & Rezaei, J. (2018) · Evaluation and Program Planning · doi:10.1016/j.evalprogplan.2017.10.002 · Cited by 253
Wan Ahmad, W. N. K., Rezaei, J., Sadaghiani, S., & Tavasszy, L. A. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.03.166 · Cited by 249
Approximate articulation of preference and priority derivation
Arbel, A. (1989) · European Journal of Operational Research · doi:10.1016/0377-2217(89)90231-2 · Cited by 247
Weight approximations in multi‐attribute decision models
Roberts, R., & Goodwin, P. (2002) · Journal of Multi-Criteria Decision Analysis · doi:10.1002/mcda.320 · Cited by 217
A case study of using DEMATEL method to identify critical factors in green supply chain management
Wu, H.-H., & Chang, S.-Y. (2015) · Applied Mathematics and Computation · doi:10.1016/j.amc.2015.01.041 · Cited by 194
Understanding the factors affecting the adoption of the Internet of Things
Hsu, C.-W., & Yeh, C.-C. (2017) · Technology Analysis & Strategic Management · doi:10.1080/09537325.2016.1269160 · Cited by 171
An integrated MCDM approach to evaluate public transportation systems in Tehran
Nassereddine, M., & Eskandari, H. (2017) · Transportation Research Part A Policy and Practice · doi:10.1016/j.tra.2017.10.013 · Cited by 165
Shojaei, P., Haeri, S. A. S., & Mohammadi, S. (2017) · Journal of Air Transport Management · doi:10.1016/j.jairtraman.2017.05.006 · Cited by 155
van de Kaa, G., Kamp, L. M., & Rezaei, J. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.07.052 · Cited by 155
A method for determining the weights of criteria: The centralized weights
Solymosi, T., & Dombi, J. D. (1986) · European Journal of Operational Research · doi:10.1016/0377-2217(86)90157-8 · Cited by 151
Valipour, A., Yahaya, N., Noor, N. M., Antuchevičienė, J., & Tamošaitienė, J. (2017) · Journal of Civil Engineering and Management · doi:10.3846/13923730.2017.1281842 · Cited by 142
Stević, Ž., Pamucar, D. S., Zavadskas, E. K., Ćirović, G., & Prentkovskis, O. (2017) · Symmetry · doi:10.3390/sym9110264 · Cited by 137
Self-citationKamaruzzaman, S. N., Lou, E. C. W., Wong, P. F., Wood, F. R., & Ani, A. I. C. (2017) · Energy Policy · doi:10.1016/j.enpol.2017.10.023 · Cited by 130
DEMATEL-ANP Risk Assessment in Oil and Gas Construction Projects
Dehdasht, G., Zin, R. M., Ferwati, M. S., Abdullahi, M. M., Keyvanfar, A., & McCaffer, R. (2017) · Sustainability · doi:10.3390/su9081420 · Cited by 129
Measuring efficiency of university-industry Ph.D. projects using best worst method
Salimi, N., & Rezaei, J. (2016) · Scientometrics · doi:10.1007/s11192-016-2121-0 · Cited by 126
Competency‐based IT personnel selection using a hybrid SWARA and ARAS‐G methodology
Dahooie, J. H., Abadi, E. B. J., Vanaki, A. S., & Firoozfar, H. R. (2017) · Human Factors and Ergonomics in Manufacturing & Service Industries · doi:10.1002/hfm.20713 · Cited by 122
Liu, F., Aiwu, G., Lukovac, V. M., & Vukić, M. (2018) · Decision Making Applications in Management and Engineering · doi:10.31181/dmame1802128l · Cited by 113
Liang, H., Ren, J., Gao, Z., Gao, S., Luo, X. Q., Dong, L., & Scipioni, A. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.04.151 · Cited by 112
Osman, T., Divigalpitiya, P., & Arima, T. (2016) · Land Use Policy · doi:10.1016/j.landusepol.2016.07.013 · Cited by 104
Supplier Selection using Rough BWM-MAIRCA model: A case study in Pharmaceutical Supplying in Libya
Badi, I. A., & Ballem, M. A. (2018) · Decision Making Applications in Management and Engineering · doi:10.31181/dmame1802016b · Cited by 102
Multicriteria Selection of the Building Material Supplier Using AHP and Fuzzy AHP
Plebankiewicz, E., & Kubek, D. (2015) · Journal of Construction Engineering and Management · doi:10.1061/(asce)co.1943-7862.0001033 · Cited by 97
Evaluation of the railway management model by using a new integrated model DELPHI-SWARA-MABAC
Vesković, S., Stević, Ž., Stojić, G., Vasiljević, M., & Milinković, S. (2018) · Decision Making Applications in Management and Engineering · doi:10.31181/dmame1802034v · Cited by 97
Self-citationIshizaka, A. (2014) · International Journal of Integrated Supply Management · doi:10.1504/ijism.2014.064353 · Cited by 94
Karabašević, D., Paunković, J., & Stanujkić, D. (2016) · Serbian Journal of Management · doi:10.5937/sjm11-7877 · Cited by 94
Application of best-worst method in evaluation of medical tourism development strategy
Abadi, F. A., Sahebi, I. G., Arab, A., Alavi, A., & Karachi, H. (2017) · Decision Science Letters · doi:10.5267/j.dsl.2017.4.002 · Cited by 94
PCM Selection Using AHP Method to Maintain Thermal Comfort of the Vehicle Occupants
Socaciu, L., Giurgiu, O., Banyai, D., & Simion, M. (2016) · Energy Procedia · doi:10.1016/j.egypro.2015.12.232 · Cited by 90
The Battle between Battery and Fuel Cell Powered Electric Vehicles: A BWM Approach
van de Kaa, G., Scholten, D., Rezaei, J., & Milchram, C. (2017) · Energies · doi:10.3390/en10111707 · Cited by 86
GLASSHOUSE LOCATING BASED ON SWARA-COPRAS APPROACH
Haghnazar, R., Zolfani, S. H., & Golabchi, M. (2015) · International Journal of Strategic Property Management · doi:10.3846/1648715x.2015.1004565 · Cited by 83
Supplier Risk Assessment Based on Best-Worst Method and K-Means Clustering: A Case Study
Er, M., & Fırat, S. Ü. O. (2018) · Sustainability · doi:10.3390/su10041066 · Cited by 83
Chabuk, A., Al-Ansari, N. A., Hussain, H. M., Knutsson, S., Pusch, R., & Laue, J. (2017) · Sustainability · doi:10.3390/su9111932 · Cited by 81
Quality assessment of scientific outputs using the BWM
Salimi, N. (2017) · Scientometrics · doi:10.1007/s11192-017-2284-3 · Cited by 77
Khodaparast, M., Rajabi, A. M., & Edalat, A. (2018) · Environmental Earth Sciences · doi:10.1007/s12665-017-7215-3 · Cited by 66
Prioritization of manufacturing sectors in Serbia for energy management improvement – AHP method
Jovanović, B., Filipović, J., & Bakić, V. V. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.03.107 · Cited by 59
Ghaffari, S., Arab, A., Nafari, J., & Manuchehr, M. (2017) · Decision Science Letters · doi:10.5267/j.dsl.2016.12.001 · Cited by 58
Božanić, D. I., Tešić, D., & Milićević, J. (2018) · Decision Making Applications in Management and Engineering · doi:10.31181/dmame1801143b · Cited by 58
Guo, J.-J., & Tsai, S. (2015) · The South African Journal of Industrial Engineering · doi:10.7166/26-2-956 · Cited by 53
Empirical assessment of the causal relationships among lean criteria using DEMATEL method
Sharma, V., Dixit, A. R., & Qadri, M. A. (2016) · Benchmarking An International Journal · doi:10.1108/bij-08-2014-0078 · Cited by 53
The Performance Analysis of Public Transport Operators in Tunisia Using AHP Method
Boujelbène, Y., & Derbel, A. (2015) · Procedia Computer Science · doi:10.1016/j.procs.2015.12.039 · Cited by 51
Managing performance improvement initiatives using DEMATEL method with application case study
Seleem, S. N., Attia, E.-A., & El-Assal, A. (2016) · Production Planning & Control · doi:10.1080/09537287.2016.1165301 · Cited by 49
Wang, D., & Zhao, J. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7903-7 · Cited by 47
Kharat, M. G., Raut, R. D., Kamble, S., & Kamble, S. J. (2016) · Management of Environmental Quality An International Journal · doi:10.1108/meq-09-2014-0133 · Cited by 47
Investigating the role of social media in polio prevention in India: a Delphi-DEMATEL approach
Kumar, A., V, Kaviani, M. A., Bottani, E., Dash, M. K., & Zavadskas, E. K. (2018) · Kybernetes · doi:10.1108/k-06-2017-0210 · Cited by 46
Sadaghiani, S., Ahmad, W. N. K. W., Rezaei, J., & Tavasszy, L. A. (2015) · International Mediterranean Gas and Oil Conference (MedGO) · doi:10.1109/medgo.2015.7330322 · Cited by 38
Panahi, S., Khakzad, A., & Afzal, P. (2017) · Arabian Journal of Geosciences · doi:10.1007/s12517-017-3290-8 · Cited by 35
Identifying and prioritizing the factors of service experience in banks: A Best-Worst method
Yadollahi, S., Kazemi, A., & Ranjbarian, B. (2018) · Decision Science Letters · doi:10.5267/j.dsl.2018.1.002 · Cited by 31
A DEMATEL method in identifying design requirements for mobile environments: students’ perspectives
Alzahrani, A. I., Al‐Samarraie, H., Eldenfria, A., & Alalwan, N. (2018) · Journal of Computing in Higher Education · doi:10.1007/s12528-018-9176-2 · Cited by 27
Tang, H. V., Chang, K., Yin, M.-S., & Sheu, R.-S. (2015) · Current Issues in Tourism · doi:10.1080/13683500.2015.1053848 · Cited by 26
Identifying critical success factors in EDA industry using DEMATEL method
Sun, C. (2014) · International Journal of Computational Intelligence Systems · doi:10.1080/18756891.2015.1001945 · Cited by 15
Study of Intellectual Capital Dimensions in IT Industry Using DEMATEL Method
Sekhar, C. R., Patwardhan, M., & Vyas, V. (2017) · Journal of Information & Knowledge Management · doi:10.1142/s0219649217500228 · Cited by 14
Assessment of Factors Influencing Information Sharing Arrangements Using the Best-Worst Method
Praditya, D., & Janssen, M. (2017) · Lecture notes in computer science · doi:10.1007/978-3-319-68557-1_10 · Cited by 9
Cited by
Weighting methods for multi-criteria decision making technique
Odu, G. O. (2019) · Journal of Applied Sciences and Environmental Management · doi:10.4314/jasem.v23i8.7 · Cited by 536
A survey of blockchain consensus algorithms performance evaluation criteria
Bamakan, S. M. H., Motavali, A., & Babaei Bondarti, A. (2020) · Expert Systems with Applications · doi:10.1016/j.eswa.2020.113385 · Cited by 481
A Modified CRITIC Method to Estimate the Objective Weights of Decision Criteria
Krishnan, A. R., Kasim, M. M., Hamid, R., & Ghazali, M. F. (2021) · Symmetry · doi:10.3390/sym13060973 · Cited by 430
Ecer, F., & Pamucar, D. (2022) · Omega · doi:10.1016/j.omega.2022.102690 · Cited by 350
Flood susceptibility mapping using convolutional neural network frameworks
Wang, Y., Fang, Z., Hong, H., & Peng, L. (2020) · Journal of Hydrology · doi:10.1016/j.jhydrol.2019.124482 · Cited by 339
Metadata
- Authors
- Pamučar, D., Stević, Ž., & Sremac, S.
- Venue
- Symmetry
- Publisher
- MDPI AG
- Published
- 2018-09-10
- Volume
- 10
- Issue
- 9
- Pages
- 393
- ISSN
- 2073-8994 (ISSN-L)
- OpenAlex
- W2891154333
- Cited by
- 857
- References
- 73
- FWCI
- 40.38
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.