Enhancing Digital Innovation for the Sustainable Transformation of Manufacturing Industry: A Pressure-State-Response System Framework to Perceptions of Digital Green Innovation and Its Performance for Green and Intelligent Manufacturing
Open accessThe DOI matches its Crossref record; 72 of the 74 references it cites were found in a registry or an index.
Abstract
Low carbon and digitalization are the general trends of manufacturing upgrading and transformation. Digital technology enables the whole process of green manufacturing and breaks down the spatial barrier. To achieve the dual carbon goals, the pressure-state-response (PSR) model, in which digital technology enables the green innovation of the manufacturing industry, was theoretically analyzed in this study. The measurement system of the digital green innovation (DGI) in the manufacturing industry was constructed according to the PSR framework. An evaluation model based on the analytic hierarchy process and the deviation maximization technique for order preference by similarity to an ideal solution method was constructed to measure the level of DGI. The results of this study from Chinese manufacturing are as follows. (i) The measurement system of the level of DGI in manufacturing industry includes a pressure system, state system and response system. (ii) In the past five years, the comprehensive index of the DGI in manufacturing industry has generally shown a trend of fluctuating rise. There are overall low and unbalanced phenomena in all regions. The gap decreased from 0.1320 to 0.1187, showing a gradually narrowing trend. (iii) Compared with other regions, the composite index of DGI is generally higher in the regions with a better ecological environment in the east and a more developed economy in the north. State parameters are higher than pressure and response parameters in most areas. (iv) Compared with other regions, the composite index of DGI in western and southern regions is lower, and the parameters of pressure, status and response are basically coordinated. (v) The application degree of digital technology, the emission intensity of waste water/exhaust gas of output value of one hundred million yuan and the expenditure intensity of digital technology adopted by enterprises are the key influencing factors of DGI in the manufacturing industry. This study not only proposed an evaluation index system of the digital green innovation level, but also puts forward policy guidance and practical guidance of digital technology to accelerate the green and intelligent manufacturing industry.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Geographical proximity to the spatial overflow of the region of the transition has certain influence.”
From Characteristics and prediction of agricultural ecological efficiency for coordination between economy and environment (2024) · cites this paper as [22]
In the citing paper
“the transformation of agricultural ecological efficiency migration is not completely isolated”
From Characteristics and prediction of agricultural ecological efficiency for coordination between economy and environment (2024) · cites this paper as [22]
Citations
Cites
Digital Innovation Management: Reinventing Innovation Management Research in a Digital World
Nambisan, S., Lyytinen, K., Majchrzak, A., & Song, M. (2017) · MIS Quarterly · doi:10.25300/misq/2017/41:1.03 · Cited by 2,967
Organizing for Innovation in the Digitized World
Yoo, Y., Boland, R. J., Lyytinen, K., & Majchrzak, A. (2012) · Organization Science · doi:10.1287/orsc.1120.0771 · Cited by 2,469
Xie, X., Huo, J., & Zou, H. (2019) · Journal of Business Research · doi:10.1016/j.jbusres.2019.01.010 · Cited by 1,370
El-Kassar, A.-N., & Singh, S. K. (2019) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2017.12.016 · Cited by 1,273
Matarazzo, M., Penco, L., Profumo, G., & Quaglia, R. (2021) · Journal of Business Research · doi:10.1016/j.jbusres.2020.10.033 · Cited by 1,182
Digital economy: An innovation driver for total factor productivity
Pan, W., Xie, T., Wang, Z., & Ma, L. (2022) · Journal of Business Research · doi:10.1016/j.jbusres.2021.09.061 · Cited by 1,149
Digital innovation:Areview and synthesis
Kohli, R., & Melville, N. P. (2019) · Information Systems Journal · doi:10.1111/isj.12193 · Cited by 790
Fernando, Y., Chiappetta Jabbour, C. J., & Wah, W.-X. (2019) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2018.09.031 · Cited by 742
Digital Transformation and Environmental Sustainability: A Review and Research Agenda
Feroz, A. K., Zo, H., & Chiravuri, A. (2021) · Sustainability · doi:10.3390/su13031530 · Cited by 714
Aligning with new digital strategy: A dynamic capabilities approach
Yeow, A., Soh, C., & Hansen, R. (2018) · The Journal of Strategic Information Systems · doi:10.1016/j.jsis.2017.09.001 · Cited by 689
Digital twin-based sustainable intelligent manufacturing: a review
He, B., & Bai, K.-J. (2021) · Advances in Manufacturing · doi:10.1007/s40436-020-00302-5 · Cited by 621
Upgrading strategies for the digital economy
Sturgeon, T. J. (2021) · Global Strategy Journal · doi:10.1002/gsj.1364 · Cited by 533
Liu, Y., Yang, Y., Li, H., & Zhong, K. (2022) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph19042414 · Cited by 426
Fang, Z., Razzaq, A., Mohsin, M., & Irfan, M. (2022) · Technology in Society · doi:10.1016/j.techsoc.2021.101844 · Cited by 380
Blichfeldt, H., & Faullant, R. (2021) · Technovation · doi:10.1016/j.technovation.2021.102275 · Cited by 376
Customer relationship management: digital transformation and sustainable business model innovation
Gil-Gomez, H., Guerola-Navarro, V., Oltra-Badenes, R., & Lozano-Quilis, J. A. (2020) · Economic Research-Ekonomska Istraživanja · doi:10.1080/1331677x.2019.1676283 · Cited by 334
Liu, Q., Leng, J., Yan, D., Zhang, D., Wei, L., Yu, A., Zhao, R., Zhang, H., & Chen, X. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.04.012 · Cited by 312
Diffusion of eco-innovations: A review
Karakaya, E., Hidalgo, A., & Nuur, C. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.01.083 · Cited by 283
Wang, Q., Su, M., Zhang, M., & Li, R. (2021) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph18116053 · Cited by 277
Exaptation in a digital innovation ecosystem: The disruptive impacts of 3D printing
Beltagui, A., Rosli, A., & Candi, M. (2020) · Research Policy · doi:10.1016/j.respol.2019.103833 · Cited by 277
The effect of manufacturing intelligence on green innovation performance in China
Yang, H., Li, L., & Liu, Y. (2022) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2022.121569 · Cited by 269
Sundarakani, B., Ajaykumar, A., & Gunasekaran, A. (2021) · Omega · doi:10.1016/j.omega.2021.102452 · Cited by 246
Digital innovation in SMEs: a systematic review, synthesis and research agenda
Ramdani, B., Raja, S., & Kayumova, M. (2022) · Information Technology for Development · doi:10.1080/02681102.2021.1893148 · Cited by 230
Zhen, Z., Yousaf, Z., Radulescu, M., & Yasir, M. (2021) · Sustainability · doi:10.3390/su13020720 · Cited by 217
Waqas, M., Honggang, X., Ahmad, N., Khan, S. A. R., & Iqbal, M. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.128998 · Cited by 216
Digital or not – The future of entrepreneurship and innovation
Berger, E. S. C., von Briel, F., Davidsson, P., & Kuckertz, A. (2021) · Journal of Business Research · doi:10.1016/j.jbusres.2019.12.020 · Cited by 211
Palmié, M., Miehé, L., Oghazi, P., Parida, V., & Wincent, J. (2022) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2022.121496 · Cited by 192
Dou, Q., & Gao, X. (2022) · Environmental Science and Pollution Research · doi:10.1007/s11356-022-20435-3 · Cited by 176
Research and Analysis of an Enterprise E-Commerce Marketing System Under the Big Data Environment
Li, L., & Zhang, J. (2021) · Journal of Organizational and End User Computing · doi:10.4018/joeuc.20211101.oa15 · Cited by 171
Digital innovations: Embedding in organizations
Wiesböck, F., & Hess, T. (2020) · Electronic Markets · doi:10.1007/s12525-019-00364-9 · Cited by 165
Yin, S., Zhang, N., & Li, B. (2020) · Sustainable Production and Consumption · doi:10.1016/j.spc.2020.05.003 · Cited by 156
Self-citationDecomposition analysis of sustainable green technology inventions in China
Fujii, H., & Managi, S. (2019) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2018.11.013 · Cited by 147
Crafting organizational innovation processes
Desouza, K. C., Dombrowski, C., Awazu, Y., Baloh, P., Sangareddy, S. R. P., Jha, S., & Kim, J. Y. (2009) · Innovation · doi:10.5172/impp.453.11.1.6 · Cited by 143
Boori, M. S., Choudhary, K., Александрович, П. Р., & Kupriyanov, A. V. (2021) · Remote Sensing Applications Society and Environment · doi:10.1016/j.rsase.2021.100530 · Cited by 133
The architectural design and implementation of a digital platform for Industry 4.0 SME collaboration
Liu, Z., Sampaio, P., Pishchulov, G., Mehandjiev, N., Cisneros-Cabrera, S., Schirrmann, A., Jiru, F., & Bnouhanna, N. (2022) · Computers in Industry · doi:10.1016/j.compind.2022.103623 · Cited by 131
Wang, F., Lu, Y., Li, J., & Ni, J. (2021) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph18062836 · Cited by 129
Lin, S., Sun, J., Marinova, D. V., & Zhao, D. (2018) · Technology Analysis and Strategic Management · doi:10.1080/09537325.2018.1457784 · Cited by 119
Digital innovation: transforming research and practice
Bogers, M. L. A. M., Garud, R. B., Thomas, L. D. W., Tuertscher, P., & Yoo, Y. (2021) · Innovation · doi:10.1080/14479338.2021.2005465 · Cited by 108
Yin, S., Zhang, N., & Dong, H. (2020) · Journal of Industrial Information Integration · doi:10.1016/j.jii.2020.100157 · Cited by 103
Self-citationBlurring the lines between physical and digital spaces: business model innovation in retailing
Jocevski, M. (2020) · California Management Review · doi:10.1177/0008125620953639 · Cited by 97
Organisations’ Resources and External Shocks: Exploring Digital Innovation in Family Firms
Soluk, J. (2022) · Industry and Innovation · doi:10.1080/13662716.2022.2065971 · Cited by 96
Yin, S., Zhang, N., Li, B., & Dong, H. (2020) · Environmental Impact Assessment Review · doi:10.1016/j.eiar.2020.106475 · Cited by 86
Self-citationHierarchical business value of information technology: Toward a digital innovation value chain
Hensen, A. H. R., & Dong, J. Q. (2019) · Information & Management · doi:10.1016/j.im.2019.103209 · Cited by 84
Going digital multinationals: Navigating economic and social imperatives in a post-pandemic world
Srinivasan, N., & Eden, L. (2021) · Journal of International Business Policy · doi:10.1057/s42214-021-00108-7 · Cited by 80
Developing a sustainability index for Mauritian manufacturing companies
Beekaroo, D., Callychurn, D. S., & Hurreeram, D. K. (2018) · Ecological Indicators · doi:10.1016/j.ecolind.2018.09.003 · Cited by 76
Strategizing for digital innovations: Value propositions for transcending market boundaries
Antonopoulou, K., & Begkos, C. (2020) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2020.120042 · Cited by 74
Circular Economy and Internet of Things: Mapping Science of Case Studies in Manufacturing Industry
Cavalieri, A., dos Reis, J. C. G., & Amorim, M. P. C. (2021) · Sustainability · doi:10.3390/su13063299 · Cited by 65
Community Empowerment-based Corporate Social Responsibility Program in Panglima Raja Village
W, R. W. A., Kunyati, S. A., & Mujiono, M. (2021) · International Journal on Social Science Economics and Art · doi:10.35335/ijosea.v10i1.2 · Cited by 63
Jahanmir, S. F., Silva, G. M., Gomes, P. J., & Gonçalves, H. M. (2020) · Journal of Business Research · doi:10.1016/j.jbusres.2019.11.010 · Cited by 57
Velez, F. F., Colman, S., Kauffman, L., Ruetsch, C. R., & Anastassopoulos, K. P. (2020) · Expert Review of Pharmacoeconomics & Outcomes Research · doi:10.1080/14737167.2021.1840357 · Cited by 55
Caldera, S., Mostafa, S. F., Desha, C., & Mohamed, S. (2021) · Sustainability · doi:10.3390/su132111965 · Cited by 54
Yin, S., Zhang, N., & Xu, J. (2021) · Journal of Management Analytics · doi:10.1080/23270012.2021.1945499 · Cited by 50
Self-citationMajchrzak, A., & Shepherd, D. A. (2021) · Information and Organization · doi:10.1016/j.infoandorg.2021.100338 · Cited by 45
Seitz, M., Gehlhoff, F., Salazar, L. A. C., Fay, A., & Vogel‐Heuser, B. (2021) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-021-01759-2 · Cited by 43
Zhu, Y., Du, W., & Zhang, J. (2021) · Environmental Science and Pollution Research · doi:10.1007/s11356-021-15618-3 · Cited by 41
Weber, M., Driessen, P., & Runhaar, H. A. C. (2013) · Journal of Environmental Planning and Management · doi:10.1080/09640568.2013.808609 · Cited by 40
On Bipolar-Valued Hesitant Fuzzy Sets and Their Applications in Multi-Attribute Decision Making
Ullah, K., Mahmood, T., Jan, N. V. S., Broumi, S., & Khan, Q. (2018) · The Nucleus · doi:10.71330/thenucleus.2018.417 · Cited by 39
Self-citationSun, Y., Wu, L., & Yin, S. (2020) · Sustainability · doi:10.3390/su122410270 · Cited by 38
Self-citationOkano, M. T., Antunes, S. N., & Fernandes, M. E. (2021) · Independent Journal of Management & Production · doi:10.14807/ijmp.v12i4.1375 · Cited by 38
Making digitalization work: unveiling digitalization's implications on psycho-social risks at work
Palumbo, R., Casprini, E., & Montera, R. (2022) · Total Quality Management & Business Excellence · doi:10.1080/14783363.2022.2055458 · Cited by 37
Industrial Internet of Things in the production environment of a Shipyard 4.0
Doce, A. M., Casás, V. D., Trueba, P., Ferreno-Gonzalez, S., & Montesinos, M. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-05229-6 · Cited by 33
LEAP-Based Greenhouse Gases Emissions Peak and Low Carbon Pathways in China’s Tourist Industry
Liu, D., Yang, D., & Huang, A. (2021) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph18031218 · Cited by 33
Environmental Performance Evaluation of the Korean Manufacturing Industry Based on Sequential DEA
Lee, H., & Choi, Y. (2019) · Sustainability · doi:10.3390/su11030874 · Cited by 29
Research and analysis of Enterprise e-commerce marketing system under big data environment
(2021) · Journal of Organizational and End User Computing · doi:10.4018/joeuc.20211101oa15 · Cited by 25
MBO based indicator-setting method for promoting low carbon city practice
Du, X., Shen, L., Wong, S. W., Meng, C., Cheng, G., & Yao, F. (2021) · Ecological Indicators · doi:10.1016/j.ecolind.2021.107828 · Cited by 23
Zhang, L., Mu, R., Hu, S., Zhang, Q., & Wang, S. (2021) · Sustainability · doi:10.3390/su13073809 · Cited by 22
Karia, N. B., & Michael, R. C. D. (2022) · Sustainability · doi:10.3390/su14074032 · Cited by 20
DIGITAL DEVELOPMENT OF ECONOMY AND SOCIETY UNDER INFLUENCE OF COVID-19
Князєва, О. (2021) · Science and innovation · doi:10.15407/scine17.01.042 · Cited by 13
Omondi, C., Abrokwah, E., & Qu, S. (2021) · European J of International Management · doi:10.1504/ejim.2021.118580 · Cited by 6
Bredariol, T. D. O. (2020) · Impact Assessment and Project Appraisal · doi:10.1080/14615517.2020.1804305 · Cited by 4
Coupling Development of Manufacturing Promotion and Innovation in China
Bing-qiang, L., Yu, J., Huang, L., Li, J., & Luo, C. (2021) · SAGE Open · doi:10.1177/21582440211047578 · Cited by 2
Sepahvand, R., Mousavi, S. N., Negad, M. A., & Sepahvand, M. (2022) · DOAJ (DOAJ: Directory of Open Access Journals) · doi:10.22034/bar.2022.14122.3557 · Cited by 1
Research works printed but not linked: 11
- Tian, 2020, Research on the evolution of green technology innovation capability in manufacturing industry based on industry heterogeneity: Also on the impact of R&D investment, Sci. Technol. Prog. Policy, 37, 63
- Liang, 2021, Optimization and Upgrading of traditional manufacturing industry: Review of the 13th Five-Year Plan and Prospect of the 14th Five-year Plan, Contemp. Econ. Manag., 43, 7
- Nagaraj, 2022, How Product Managers Use Senseshaping to Drive the Front-end of Digital Product Innovation: The five senseshaping practices presented here can help product managers recognize, interpret, and respond appropriately to new information in the front-end of digital innovation, Res.-Technol. Manag., 65, 29
- Nie, 2019, Can OFDI improve the efficiency of Green innovation in Chinese industry?: Based on the perspective of innovation value chain and spatial linkage, World Econ. Stud., 2, 111
- Yu, 2020, Connotation, path and driving mechanism of high quality development of manufacturing industry, Rev. Ind. Econ., 36, 13
- Jiang, 2019, Measurement of high quality development level of manufacturing industry, regional differences and improvement paths, Shanghai J. Econ., 7, 70
- Deng, 2020, Research on the Impact of Internet on high quality development of manufacturing industry, J. Cap. Univ. Econ. Bus., 3, 57
- Pei, 2019, Research on the promotion of high quality development of Chinese manufacturing industry by brand cooperation with technological progress, Mod. Manag., 4, 18
- Ren, 2019, The high quality development of China’s manufacturing industry needs to adhere to six strategies in the new era, J. Humanit., 7, 31
- Chen, 2020, Research on quality Reform strategy of Manufacturing industry in China, J. Macro-Qual. Res., 1, 124
- Li, 2021, Mechanism and path of high quality development of manufacturing industry under digital economy, Macroecon. Manag., 5, 36
Cited by
Zhang, L., Mu, R., Zhan, Y., Yu, J., Liu, L., Yu, Y., & Zhang, J. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2022.158403 · Cited by 473
Wang, J., Liu, Y., Wang, W., & Wu, H. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.136954 · Cited by 303
Dong, T., Yin, S., & Zhang, N. (2023) · Systems · doi:10.3390/systems11030122 · Cited by 179
Self-citationYin, S., & Zhao, Y. (2024) · Humanities and Social Sciences Communications · doi:10.1057/s41599-024-02691-5 · Cited by 170
Self-citationDi, K., Chen, W., Shi, Q., Cai, Q., & Zhang, B. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.141332 · Cited by 164
Metadata
- Authors
- Yin, S., Zhang, N., Ullah, K., & Gao, S.
- Affiliations
- Hebei Agricultural University (CN)
- Riphah International University (PK)
- Heilongjiang University (CN)
- Corresponding author
- Yin, Shi
- Venue
- Systems
- Publisher
- MDPI AG
- Published
- 2022-05-27
- Volume
- 10
- Issue
- 3
- Pages
- 72
- ISSN
- 2079-8954 (ISSN-L)
- OpenAlex
- W4281716582
- Cited by
- 242
- References
- 74
- Citations by year
- 2026: 31 · 2025: 49 · 2024: 69 · 2023: 64 · 2022: 29
- FWCI
- 24.21
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Systems (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- office of Research, Innovation, and Commercialization (ORIC) of Riphah International University Lahore (Riphah-ORIC-21-22/FEAS-20, 21YJCZH203, 21557635D, HB21YJ003, BJ2021084, 2020047, 2021C-39, YJ2020017, 2020-KYYWF-0969, 20JYB030, HBCT2021230301)
- Philosophy and Social Sciences Planning Project of the Ministry of Education (Riphah-ORIC-21-22/FEAS-20, 21YJCZH203, 21557635D, HB21YJ003, BJ2021084, 2020047, 2021C-39, YJ2020017, 2020-KYYWF-0969, 20JYB030, HBCT2021230301)
- Soft Science Special Project of Hebei Innovation Capability Enhancement Program (Riphah-ORIC-21-22/FEAS-20, 21YJCZH203, 21557635D, HB21YJ003, BJ2021084, 2020047, 2021C-39, YJ2020017, 2020-KYYWF-0969, 20JYB030, HBCT2021230301)
- Social Science Fund project of Hebei Province (Riphah-ORIC-21-22/FEAS-20, 21YJCZH203, 21557635D, HB21YJ003, BJ2021084, 2020047, 2021C-39, YJ2020017, 2020-KYYWF-0969, 20JYB030, HBCT2021230301)
- Top Young Talents Scientific Research Project of Higher Education in Hebei Province (Riphah-ORIC-21-22/FEAS-20, 21YJCZH203, 21557635D, HB21YJ003, BJ2021084, 2020047, 2021C-39, YJ2020017, 2020-KYYWF-0969, 20JYB030, HBCT2021230301)
- Baoding Philosophy and Social Science Planning Project (Riphah-ORIC-21-22/FEAS-20, 21YJCZH203, 21557635D, HB21YJ003, BJ2021084, 2020047, 2021C-39, YJ2020017, 2020-KYYWF-0969, 20JYB030, HBCT2021230301)
- Teaching and Research Project of Hebei Agricultural University (Riphah-ORIC-21-22/FEAS-20, 21YJCZH203, 21557635D, HB21YJ003, BJ2021084, 2020047, 2021C-39, YJ2020017, 2020-KYYWF-0969, 20JYB030, HBCT2021230301)
- Scientific Research Foundation for the Talents of Hebei Agricultural University (Riphah-ORIC-21-22/FEAS-20, 21YJCZH203, 21557635D, HB21YJ003, BJ2021084, 2020047, 2021C-39, YJ2020017, 2020-KYYWF-0969, 20JYB030, HBCT2021230301)
- Heilongjiang University Special Fund Project (Riphah-ORIC-21-22/FEAS-20, 21YJCZH203, 21557635D, HB21YJ003, BJ2021084, 2020047, 2021C-39, YJ2020017, 2020-KYYWF-0969, 20JYB030, HBCT2021230301)
- Philosophy and Social Science research Planning project of Heilongjiang Province (Riphah-ORIC-21-22/FEAS-20, 21YJCZH203, 21557635D, HB21YJ003, BJ2021084, 2020047, 2021C-39, YJ2020017, 2020-KYYWF-0969, 20JYB030, HBCT2021230301)
- Hebei Agricultural Industry System Project (Riphah-ORIC-21-22/FEAS-20, 21YJCZH203, 21557635D, HB21YJ003, BJ2021084, 2020047, 2021C-39, YJ2020017, 2020-KYYWF-0969, 20JYB030, HBCT2021230301)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Digital Transformation in Industry
- Social Sciences › Business, Management and Accounting › Strategy and Management › Digital Economy and Transformation
- Social Sciences › Business, Management and Accounting › Management of Technology and Innovation › Sustainability and Innovation in Business
- Keywords
- green manufacturing, smart manufacturing, pressure-state-response model, digital technology adoption, dual carbon goals, regional disparities, evaluation index system, Chinese manufacturing
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.