The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
Microalgae Harvesting Methods for Industrial Production of Biodiesel: Critical Review and Comparative Analysis
Open accessAbstract
Microalgae biomass can be used to produce numerous value added products such as biodiesel, bioethanol, biogas and bio hydrogen, fish feed, animal feed, human food supplements and skin care products. Production of value added products from microalgae biomass requires growing and recovery of the algae biomass and extraction and downstream processing of the desired product. However, the major obstacle for using microalgae biomass on an industrial-scale for the production of biodiesel and other value added products is the dewatering step which accounts for 20-30% of the total costs associated with microalgae production and processing. The aim of this study was to review the current methods used for harvesting and concentrating microalgae and to perform a comparative analysis in order to determine the most efficient and economically viable dewatering methods for large scale processing of microalgae biomass. The harvesting techniques investigated included sedimentation, vacuum filtration, pressure filtration, cross flow filtration, disc stack centrifugation, decanter centrifuge, dispersed air floatation, dissolved air flotation, fluidic oscillation, inorganic flocculation, organic flocculation, auto-flocculation, bio-flocculation electrolytic coagulation, electrolytic flocculation and electrolytic floatation. Eight criteria were used for evaluation of these microalgae harvesting techniques: (a) dewatering efficiency (b) cost (c) toxicity (d) suitability for industrial scale (e) time (f) species specificity (g) reusability of media and (h) maintenance. Each criterion was assigned a score between 7 and 15 based on its degree of importance. Higher values were given to the criteria that were deemed most important for development of an efficient and economic large scale dewatering method for microalgae whereas lower values were given to criteria that were deemed necessary for determining a suitable method but were considered less important. The results indicated that of the 16 methods evaluated, 4 scored values of 80/100 and above and were deemed suitable for harvesting microalgae on an industrial scale. Three were physical techniques (disc stack centrifuge (87/100), cross flow filtration (84/100), decanter centrifugation (82/100)) and the forth was the organic flocculation (80) method. These techniques were deemed suitable for large scale use because of their effectiveness, low operational costs, suitability for numerous species, rapidness, minimal maintenance requirement and being environmentally friendly. The other methods were deemed unsuitable because they are not effective in dewatering a wide array of microalgae species, not suited for large volumes, costly and require high maintenance. Although each of the optimum techniques was deemed suitable for harvesting of microalgae on its merit, a combination of methods can also be used to enhance the recovery efficiency and improve the economics. The use of organic flocculation as an initial harvesting step to concentrate the algae suspension and the centrifugation (or filtration) as a secondary dewatering step will reduce the time and costs associated with dewatering. Flocculation allows for effective removal of algae from large amounts of liquid media and as such the costs associated with energy intensive centrifugation and filtration techniques (used individually) can be reduced by using them as secondary techniques since less volumes of microalgae suspension will undergo the secondary treatment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Microalgae for biodiesel production and other applications: A review
Mata, T. M., Martins, A. A., & Caetano, N. S. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.07.020 · Cited by 5,685 · cited 2×
“However, drawbacks are associated with large energy requirements and costs associated with periodic replacement of membrane as a result of clogging [17,46,6062].”
BackgroundBrennan, L., & Owende, P. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.10.009 · Cited by 4,894 · cited 4×
“Microalgae range in size from 2 to 30 μm indicating that a micro-filtration membrane is suitable for vacuum filtration [17,48].”
BackgroundInfluentialCommercial Applications of Microalgae
Spolaore, P., Joannis-Cassan, C., Duran, E., & Isambert, A. (2006) · Journal of Bioscience and Bioengineering · doi:10.1263/jbb.101.87 · Cited by 4,285
The Potential of Sustainable Algal Biofuel Production Using Wastewater Resources
Pittman, J. K., Dean, A. P., & Osundeko, O. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2010.06.035 · Cited by 1,526
Photobioreactors: Production systems for phototrophic microorganisms
O., P. (2001) · Applied Microbiology and Biotechnology · doi:10.1007/s002530100702 · Cited by 987 · cited 1×
“However, processing microalgae into biodiesel and other value added products requires culturing of the microalgae, recovery of the microalgae biomass and the extraction and downstream processing of the oil and other value added products [14].”
BackgroundSlade, R., & Bauen, A. (2013) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2012.12.019 · Cited by 978
Flocculation as a low-cost method for harvesting microalgae for bulk biomass production
Vandamme, D., Foubert, I., & Muylaert, K. (2013) · Trends in Biotechnology · doi:10.1016/j.tibtech.2012.12.005 · Cited by 928
(2013) · doi:10.1007/978-94-007-5479-9 · Cited by 670
Advances and perspectives in using microalgae to produce biodiesel
Amaro, H. M., Guedes, A. C., & Malcata, F. X. (2011) · Applied Energy · doi:10.1016/j.apenergy.2010.12.014 · Cited by 572
Microalgae for the production of bulk chemicals and biofuels
Wijffels, R. H., Barbosa, M. J., & Eppink, M. H. M. (2010) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.215 · Cited by 522 · cited 1×
“Chemical Harvesting Methods On the basis of energy requirement, chemical flocculation as a dewatering method seems to be the most promising for large scale utilization [16,134, 135].”
BackgroundMechanism and challenges in commercialisation of algal biofuels
Singh, A., Nigam, P. S., & Murphy, J. D. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2010.06.057 · Cited by 476 · cited 2×
“Compared to sedimentation, flotation method is much faster and more effective for harvesting of microalgae [96].”
BackgroundDissolved air flotation and me
Edzwald, J. K. (2010) · Water Research · doi:10.1016/j.watres.2009.12.040 · Cited by 460
Griffiths, M. J., van Hille, R. P., & Harrison, S. T. L. (2012) · Journal of Applied Phycology · doi:10.1007/s10811-011-9723-y · Cited by 341
Cell fragility — The key problem of microalgae mass production in closed photobioreactors
Gudin, C., & Chaumont, D. (1991) · Bioresource Technology · doi:10.1016/0960-8524(91)90146-b · Cited by 175 · cited 1×
“Gudin and Chaumont [56] reported that precoated drum filter with filter aid (diatomaceous earth) is effective in harvesting the microalgae Chlamydomonas reinhardtii.”
BackgroundFunctional properties of the biomass of three microalgal species
Guil-Guerrero, J. L., Navarro-Juárez, R., López-Martı́nez, J. C., Campra-Madrid, P., & Rebolloso-Fuentes, M. (2004) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2004.02.014 · Cited by 173
Environmental performance of algal biofuel technology options
Vasudevan, V., Stratton, R. W., Pearlson, M. N., Jersey, G. R., Beyene, A. G., Weissman, J. C., Rubino, M., & Hileman, J. I. (2012) · Environmental Science & Technology · doi:10.1021/es2026399 · Cited by 157 · cited 3×
“[84] achieved an 18% microalgae concentration using a disc centrifuge.”
BackgroundMethodInfluentialRealizing the promises of marine biotechnology
Luiten, E. E. M., Akkerman, I., Koulman, A., Kamermans, P., Reith, H., Barbosa, M. J., Sipkema, D., & Wijffels, R. H. (2003) · Biomolecular Engineering · doi:10.1016/s1389-0344(03)00074-1 · Cited by 66 · cited 1×
“Microalgae biomass can be used to produce numerous value added products such as biofuels (biodiesel, bioethanol, biogas and biohydrogen) [2], fish feed [3], animal feed [4], human food supplements such as vitamins A, B1, B2, B12, C, E, nicotinate, biotin, folic acid and pantothenic acid), Omega 3 fatty acids (Eicosape…”
Background
Cited by
Microalgae Harvesting Techniques: A Review
Singh, G., & Patidar, S. K. (2018) · Journal of Environmental Management · doi:10.1016/j.jenvman.2018.04.010 · Cited by 647
Tan, J. S., Lee, S. Y., Chew, K. W., Lam, M. K., Lim, J. W., Ho, S.-H., & Show, P. L. (2020) · Bioengineered · doi:10.1080/21655979.2020.1711626 · Cited by 524
RetractedKumar, M., Sun, Y., Rathour, R., Pandey, A., Thakur, I. S., & Tsang, D. C. W. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.137116 · Cited by 472
Chew, K. W., Chia, S. R., Show, P. L., Yap, Y. J., Ling, T. C., & Chang, J.-S. (2018) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2018.05.039 · Cited by 324
The Evolution and Versatility of Microalgal Biotechnology: A Review
Hamed, I. (2016) · Comprehensive Reviews in Food Science and Food Safety · doi:10.1111/1541-4337.12227 · Cited by 282
Metadata
- Authors
- hattab, M. A.
- Venue
- Journal of Fundamentals of Renewable Energy and Applications
- Publisher
- OMICS Publishing Group
- Published
- 2015
- Volume
- 05
- Issue
- 02
- ISSN
- 2090-4533 (ISSN-L)
- 2090-4541
- OpenAlex
- W2095988611
- Cited by
- 159
- References
- 17
- FWCI
- 3.81
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.