The DOI matches its Crossref record; 100 of the 100 references it cites were found in a registry or an index.
Additive Manufacturing of Ceramic‐Based Materials
Abstract
This paper offers a review of present achievements in the field of processing of ceramic‐based materials with complex geometry using the main additive manufacturing (AM) technologies. In AM, the geometrical design of a desired ceramic‐based component is combined with the materials design. In this way, the fabrication times and the product costs of ceramic‐based parts with required properties can be substantially reduced. However, dimensional accuracy and surface finish still remain crucial features in today's AM due to the layer‐by‐layer formation of the parts. In spite of the fact that significant progress has been made in the development of feedstock materials, the most difficult limitations for AM technologies are the restrictions set by material selection for each AM method and aspects considering the inner architectural design of the manufactured parts. Hence, any future progress in the field of AM should be based on the improvement of the existing technologies or, alternatively, the development of new approaches with an emphasis on parts allowing the near‐net formation of ceramic structures, while optimizing the design of new materials and of the part architecture.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing: technology, applications and research needs
Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,073
Derby, B. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104502 · Cited by 1,984
Binding mechanisms in selective laser sintering and selective laser melting
Kruth, J., Mercelis, P., Van Vaerenbergh, J., Froyen, L., & Rombouts, M. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573365 · Cited by 1,383
3D Printing of Interdigitated Li‐Ion Microbattery Architectures
Sun, K., Wei, T., Ahn, B. Y., Seo, J. Y., Dillon, S. J., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201301036 · Cited by 1,341
Progress in Additive Manufacturing and Rapid Prototyping
Kruth, J.-P., Leu, M. C., & Nakagawa, T. (1998) · CIRP Annals · doi:10.1016/s0007-8506(07)63240-5 · Cited by 1,331
Automated construction by contour crafting—related robotics and information technologies
Khoshnevis, B. (2004) · Automation in Construction · doi:10.1016/j.autcon.2003.08.012 · Cited by 1,161
Projection micro-stereolithography using digital micro-mirror dynamic mask
Sun, C., Fang, N., Wu, D. M., & Zhang, X. (2005) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2004.12.011 · Cited by 880
Direct Ink Writing of Three‐Dimensional Ceramic Structures
Lewis, J. A., Smay, J. E., Stuecker, J., & Cesarano, J. (2006) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2006.01382.x · Cited by 823
Freeform fabrication of ceramics via stereolithography
Griffith, M. L., & Halloran, J. W. (1996) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1996.tb09022.x · Cited by 815
Three‐dimensional printing of porous ceramic scaffolds for bone tissue engineering
Seitz, H., Rieder, W., Irsen, S., Leukers, B., & Tille, C. (2005) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30291 · Cited by 742
Colloidal Inks for Directed Assembly of 3-D Periodic Structures
Smay, J. E., Cesarano, J., & Lewis, J. A. (2002) · Langmuir · doi:10.1021/la0257135 · Cited by 700
Tan, K. H., Chua, C. K., Leong, K. F., Cheah, C. M., Cheang, P., Abu Bakar, M. S., & Cha, S. W. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00131-5 · Cited by 625
Landers, R., Hübner, U., Schmelzeisen, R., & Mülhaupt, R. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00139-4 · Cited by 624
Mechanical and in vivo performance of hydroxyapatite implants with controlled architectures
Chu, T.-M. G., Orton, D. G., Hollister, S. J., Feinberg, S. E., & Halloran, J. W. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00243-5 · Cited by 554
Hydroxyapatite scaffolds for bone tissue engineering made by 3D printing
Leukers, B., Gülkan, H., Irsen, S. H., Milz, S., Tille, C., Schieker, M., & Seitz, H. (2005) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-005-4716-5 · Cited by 499
Development of controlled porosity polymer-ceramic composite scaffolds via fused deposition modeling
Kalita, S. J., Bose, S., Hosick, H. L., & Bandyopadhyay, A. (2003) · Materials Science and Engineering: C · doi:10.1016/s0928-4931(03)00052-3 · Cited by 488
Micro-stereolithography of polymeric and ceramic microstructures
Zhang, X., Jiang, X. N., & Sun, C. (1999) · Sensors and Actuators A: Physical · doi:10.1016/s0924-4247(99)00189-2 · Cited by 450
Fu, Q., Saiz, E., & Tomsia, A. P. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.06.030 · Cited by 366
Inkjet printing ceramics: From drops to solid
Derby, B. (2011) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2011.01.016 · Cited by 365
Tarafder, S., Balla, V. K., Davies, N. M., Bandyopadhyay, A., & Bose, S. (2013) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.555 · Cited by 364
Ceramic suspensions suitable for stereolithography
Hinczewski, C., Corbel, S., & Chartier, T. (1998) · Journal of the European Ceramic Society · doi:10.1016/s0955-2219(97)00186-6 · Cited by 351
Ceramic components manufacturing by selective laser sintering
Bertrand, P., Bayle, F., Combe, C., Goeuriot, P., & Smurov, I. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2007.08.085 · Cited by 351
3D printing of bone substitute implants using calcium phosphate and bioactive glasses
Bergmann, C., Lindner, M., Zhang, W., Koczur, K., Kirsten, A., Telle, R., & Fischer, H. (2010) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2010.04.037 · Cited by 311
Mechanical properties of calcium phosphate scaffolds fabricated by robocasting
Miranda, P., Pajares, A., Saiz, E., Tomsia, A. P., & Guiberteau, F. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31587 · Cited by 301
Direct Inkjet Printing of Dental Prostheses Made of Zirconia
Ebert, J., Özkol, E., Zeichner, A., Uibel, K., Weiss, Ö., Koops, U., Telle, R., & Fischer, H. (2009) · Journal of Dental Research · doi:10.1177/0022034509339988 · Cited by 281
Depth and width of cured lines in photopolymerizable ceramic suspensions
Gentry, S. P., & Halloran, J. W. (2013) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2013.02.033 · Cited by 274
Concentrated hydroxyapatite inks for direct-write assembly of 3-D periodic scaffolds
Michna, S., Wu, W., & Lewis, J. A. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.040 · Cited by 266
Khalyfa, A., Vogt, S., Weisser, J., Grimm, G., Rechtenbach, A., Meyer, W., & Schnabelrauch, M. (2007) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-006-0073-2 · Cited by 247
Ink‐Jet Printing of Wax‐Based Alumina Suspensions
Seerden, K. A. M., Reis, N., Evans, J. R. G., Grant, P. S., Halloran, J. W., & Derby, B. (2001) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2001.tb01045.x · Cited by 237
Resorbable Dicalcium Phosphate Bone Substitutes Prepared by 3D Powder Printing
Gbureck, U., Hölzel, T., Klammert, U., Würzler, K., Müller, F. A., & Barralet, J. E. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200700019 · Cited by 233
Butscher, A., Bohner, M., Roth, C., Ernstberger, A., Heuberger, R., Doebelin, N., Rudolf von Rohr, P., & Müller, R. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.08.027 · Cited by 224
Liu, X., Rahaman, M. N., Hilmas, G. E., & Bal, B. S. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.02.026 · Cited by 223
Direct write assembly of calcium phosphate scaffolds using a water-based hydrogel
Franco, J., Hunger, P., Launey, M. E., Tomsia, A. P., & Saiz, E. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.06.031 · Cited by 217
New developments in fused deposition modeling of ceramics
Bellini, A., Shor, L., & Guceri, S. I. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510612901 · Cited by 216
Pham, T. A., Kim, D. ‐., Lim, T. ‐., Park, S. ‐., Yang, D., & Lee, K. ‐. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600009 · Cited by 214
Low temperature direct 3D printed bioceramics and biocomposites as drug release matrices
Gbureck, U., Vorndran, E., Müller, F. A., & Barralet, J. E. (2007) · Journal of Controlled Release · doi:10.1016/j.jconrel.2007.06.022 · Cited by 213
Sol‐Gel Inks for Direct‐Write Assembly of Functional Oxides
Duoss, E. B., Twardowski, M., & Lewis, J. A. (2007) · Advanced Materials · doi:10.1002/adma.200701372 · Cited by 211
Ultraviolet‐Assisted Direct‐Write Fabrication of Carbon Nanotube/Polymer Nanocomposite Microcoils
Lebel, L. L., Aïssa, B., Khakani, M. A. E., & Therriault, D. (2009) · Advanced Materials · doi:10.1002/adma.200902192 · Cited by 209
The morphology of anisotropic 3D-printed hydroxyapatite scaffolds
Fierz, F. C., Beckmann, F., Huser, M., Irsen, S. H., Leukers, B., Witte, F., Degistirici, Ö., Andronache, A., Thie, M., & Müller, B. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.06.012 · Cited by 203
Choi, J.-W., Wicker, R., Lee, S.-H., Choi, K.-H., Ha, C.-S., & Chung, I. (2009) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2009.05.004 · Cited by 200
A Review of Robocasting Technology
Cesarano, J. (1998) · MRS Proceedings · doi:10.1557/proc-542-133 · Cited by 193
Feedstock material property – process relationships in fused deposition of ceramics (FDC)
Venkataraman, N., Rangarajan, S., Matthewson, M. J., Harper, B., Safari, A., Danforth, S. C., Wu, G., Langrana, N., Guceri, S., & Yardimci, A. (2000) · Rapid Prototyping Journal · doi:10.1108/13552540010373344 · Cited by 188
Robocasting of 45S5 bioactive glass scaffolds for bone tissue engineering
Eqtesadi, S., Motealleh, A., Miranda, P., Pajares, A., Lemos, A., & Ferreira, J. M. F. (2014) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2013.08.003 · Cited by 183
Laminated object manufacturing for rapid tooling and patternmaking in foundry industry
Mueller, B., & Kochan, D. (1999) · Computers in Industry · doi:10.1016/s0166-3615(98)00127-4 · Cited by 179
Porous ceramic bone scaffolds for vascularized bone tissue regeneration
Will, J., Melcher, R., Treul, C., Travitzky, N., Kneser, U., Polykandriotis, E., Horch, R., & Greil, P. (2008) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-007-3346-5 · Cited by 179
Self-citationAhn, B. Y., Shoji, D., Hansen, C. J., Hong, E., Dunand, D. C., & Lewis, J. A. (2010) · Advanced Materials · doi:10.1002/adma.200904232 · Cited by 176
3D fine scale ceramic components formed by ink-jet prototyping process
Noguera, R., Lejeune, M., & Chartier, T. (2005) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2005.03.223 · Cited by 176
Surface roughness prediction using measured data and interpolation in layered manufacturing
Ahn, D., Kim, H.-C., & Lee, S. (2008) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2008.02.050 · Cited by 172
Zirconia/alumina functionally graded material made by ceramic ink jet printing
Mott, M., & Evans, J. (1999) · Materials Science and Engineering A · doi:10.1016/s0921-5093(99)00266-x · Cited by 172
The influences of the material properties on ceramic micro-stereolithography
Sun, C., & Zhang, X. (2002) · Sensors and Actuators A Physical · doi:10.1016/s0924-4247(02)00264-9 · Cited by 171
Badev, A., Abouliatim, Y., Chartier, T., Lecamp, L., Lebaudy, P., Chaput, C., & Delage, C. (2011) · Journal of Photochemistry and Photobiology A: Chemistry · doi:10.1016/j.jphotochem.2011.05.010 · Cited by 169
Alumina–aluminum interpenetrating-phase composites with three-dimensional periodic architecture
Marchi, C. W. S., Kouzeli, M., Rao, R., Lewis, J. A., & Dunand, D. C. (2003) · Scripta Materialia · doi:10.1016/s1359-6462(03)00441-x · Cited by 169
Preparation of porous hydroxyapatite scaffolds
Saiz, E., Grémillard, L., Menendez, G., Miranda, P., Gryń, K., & Tomsia, A. P. (2006) · Materials Science and Engineering C · doi:10.1016/j.msec.2006.05.038 · Cited by 169
Nanoparticle Inks for Directed Assembly of Three‐Dimensional Periodic Structures
Li, Q., & Lewis, J. A. (2003) · Advanced Materials · doi:10.1002/adma.200305413 · Cited by 168
3D Powder Printing of β‐Tricalcium Phosphate Ceramics Using Different Strategies
Vorndran, E., Klarner, M., Klammert, U., Grover, L. M., Patel, S., Barralet, J. E., & Gbureck, U. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200800179 · Cited by 164
A novel system for fused deposition of advanced multiple ceramics
Jafari, M. A., Han, W., Mohammadi, F., Safari, A., Danforth, S. C., & Langrana, N. A. (2000) · Rapid Prototyping Journal · doi:10.1108/13552540010337047 · Cited by 154
Tang, H., Chiu, M.-L., & Yen, H.-C. (2011) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2011.02.020 · Cited by 153
Maruo, S., & Ikuta, K. (2002) · Sensors and Actuators A Physical · doi:10.1016/s0924-4247(02)00043-2 · Cited by 151
Roy, T. D., Simon, J. L., Ricci, J. L., Rekow, E. D., Thompson, V. P., & Parsons, J. R. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.20034 · Cited by 145
Interfacial characteristics of composites fabricated by laminated object manufacturing
Klosterman, D., Chartoff, R. P., Graves, G., Osborne, N., & Priore, B. E. (1998) · Composites Part A Applied Science and Manufacturing · doi:10.1016/s1359-835x(98)00088-8 · Cited by 142
Suwanprateeb, J., Sanngam, R., Suvannapruk, W., & Panyathanmaporn, T. (2009) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-009-3697-1 · Cited by 139
Advanced Support Structures for Enhanced Catalytic Activity
Stuecker, J. N., Miller, J. E., Ferrizz, R. E., Mudd, J. E., & Cesarano, J. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie030291v · Cited by 131
Bian, W., Li, D., Lian, Q., Li, X., Zhang, W., Wang, K., & Jin, Z. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211193511 · Cited by 130
Formulation and Multilayer Jet Printing of Ceramic Inks
Song, J., Edirisinghe, M. J., & Evans, J. (1999) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1999.tb02253.x · Cited by 124
Shanjani, Y., Croos, J. N. A. D., Pilliar, R. M., et al. (2010) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31610 · Cited by 121
Houmard, M., Fu, Q., Genet, M., Saiz, E., & Tomsia, A. P. (2013) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.32935 · Cited by 120
A simple recipe for direct writing complex 45S5 Bioglass® 3D scaffolds
Eqtesadi, S., Motealleh, A., Miranda, P., Lemos, A., Rebelo, A., & Ferreira, J. M. F. (2012) · Materials Letters · doi:10.1016/j.matlet.2012.11.043 · Cited by 119
Chumnanklang, R., Panyathanmaporn, T., Sitthiseripratip, K., & Suwanprateeb, J. (2007) · Materials Science and Engineering C · doi:10.1016/j.msec.2006.11.004 · Cited by 114
Direct inkjet printing of Si3N4: Characterization of ink, green bodies and microstructure
Cappi, B., Özkol, E., Ebert, J., & Telle, R. (2008) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2008.03.004 · Cited by 112
Influence of Residual Monomer on Cracking in Ceramics Fabricated by Stereolithography
Bae, C., & Halloran, J. W. (2010) · International Journal of Applied Ceramic Technology · doi:10.1111/j.1744-7402.2010.02578.x · Cited by 112
Moisture based three-dimensional printing of calcium phosphate structures for scaffold engineering
Butscher, A., Bohner, M., Doebelin, N., Galea, L., Loeffel, O., & Müller, R. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.10.009 · Cited by 111
Preceramic Paper‐Derived Ceramics
Travitzky, N. A., Windsheimer, H., Fey, T., & Greil, P. (2008) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2008.02752.x · Cited by 111
Self-citationDevelopment of a binder formulation for fused deposition of ceramics
McNulty, T. F., Mohammadi, F., Bandyopadhyay, A. K., Shanefield, D. J., Danforth, S. C., & Safari, A. (1998) · Rapid Prototyping Journal · doi:10.1108/13552549810239012 · Cited by 109
Control of the viscous behavior of highly concentrated mullite suspensions for robocasting
Stuecker, J. N., Cesarano, J., & Hirschfeld, D. A. (2003) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(03)00586-7 · Cited by 106
Dellinger, J. G., Cesarano, J., & Jamison, R. D. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31072 · Cited by 101
Porous and strong bioactive glass (13–93) scaffolds fabricated by freeze extrusion technique
Huang, T., Rahaman, M. N., Doiphode, N. D., Leu, M.-C., Bal, B. S., Day, D. E., & Liu, X. (2011) · Materials Science and Engineering C · doi:10.1016/j.msec.2011.06.004 · Cited by 97
de Hazan, Y., Heinecke, J., Weber, A. P., et al. (2009) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2009.05.012 · Cited by 96
Biological evaluation of an apatite–mullite glass-ceramic produced via selective laser sintering
Goodridge, R., Wood, D. J., Ohtsuki, C., & Dalgarno, K. W. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2006.10.005 · Cited by 93
Three‐Dimensional Printing of Complex‐Shaped Alumina/Glass Composites
Zhang, W., Melcher, R., Travitzky, N. A., Bordia, R. K., & Greil, P. (2009) · Advanced Engineering Materials · doi:10.1002/adem.200900213 · Cited by 92
Self-citationFreeze-form extrusion fabrication of ceramic parts
Huang, T., Mason, M. S., Hilmas, G. E., et al. (2006) · Virtual and Physical Prototyping · doi:10.1080/17452750600649609 · Cited by 85
Igawa, K., Mochizuki, M., 杉森, 理., Shimizu, K., Yamazawa, K., Kawaguchi, H., Nakamura, K., Takato, T., Nishimura, R., Suzuki, S., et al. (2006) · Journal of Artificial Organs · doi:10.1007/s10047-006-0347-y · Cited by 84
A novel aqueous ceramic suspension for ceramic stereolithography
Zhou, W., Li, D., & Wang, H. (2010) · Rapid Prototyping Journal · doi:10.1108/13552541011011686 · Cited by 80
Optical characterization of stereolithography alumina suspensions using the Kubelka–Munk model
Abouliatim, Y., Chartier, T., Abélard, P., Chaput, C., & Delage, C. (2009) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2008.07.008 · Cited by 77
Sintering of 3 D ‐Printed Glass/ HA p Composites
Winkel, A., Meszaros, R., Reinsch, S., Müller, R., Travitzky, N. A., Fey, T., Greil, P., & Wondraczek, L. (2012) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2012.05368.x · Cited by 76
Self-citationDiffusion-limited photopolymerization in scanning micro-stereolithography
Fang, N. X., Sun, C., & Zhang, X. (2004) · Applied Physics A · doi:10.1007/s00339-004-2938-x · Cited by 69
Özkol, E., Ebert, J., Uibel, K., Wätjen, A. M., & Telle, R. (2008) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2008.06.020 · Cited by 66
Paul, B. K., & Voorakarnam, V. (2001) · Journal of Manufacturing Processes · doi:10.1016/s1526-6125(01)70124-7 · Cited by 62
Solid freeform fabrication of ceramics
Cawley, J. D. (1999) · Current Opinion in Solid State and Materials Science · doi:10.1016/s1359-0286(99)00055-8 · Cited by 61
Gao, C., Yang, B., Hu, H., Liu, J., Shuai, C., & Peng, S. (2013) · Materials Science and Engineering C · doi:10.1016/j.msec.2013.05.017 · Cited by 56
Pham, D. T., & Ji, C. (2000) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1243/0954406001523650 · Cited by 54
Thermomechanical analysis of the laminated object manufacturing (LOM) process
Sonmez, F. O., & Hahn, H. T. (1998) · Rapid Prototyping Journal · doi:10.1108/13552549810197541 · Cited by 51
Designing with Pores - Synthesis and Applications
Luyten, J., Mullens, S., & Thijs, I. (2010) · KONA Powder and Particle Journal · doi:10.14356/kona.2010012 · Cited by 50
Size-dependent degradation and bioactivity of borate bioactive glass
Deliormanlı, A. M. (2013) · Ceramics International · doi:10.1016/j.ceramint.2013.03.081 · Cited by 46
Laminated object manufacturing of LZSA glass‐ceramics
Gomes, C. M., Travitzky, N. A., Greil, P., Acchar, W., Birol, H., de Oliveira, A. P. N., & Hotza, D. (2011) · Rapid Prototyping Journal · doi:10.1108/13552541111184152 · Cited by 43
Self-citationIssues in fabricating manufacturing tooling using powder-based additive freeform fabrication
Paul, B. K., & Baskaran, S. (1996) · Journal of Materials Processing Technology · doi:10.1016/0924-0136(96)02482-x · Cited by 42
Wang, J. (2013) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-013-0065-3 · Cited by 37
Özkol, E. (2013) · Journal of the American Ceramic Society · doi:10.1111/jace.12285 · Cited by 24
The finite element analysis of melt flow behaviour in micro-injection moulding
Griffiths, C. A., Dimov, S., Brousseau, E., & Packianather, M. (2008) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1243/09544054jem965 · Cited by 23
Photocatalytic reaction intensification using monolithic supports designed by stereolithography
Furman, M., Corbel, S., Wild, G., & Zahraa, O. (2009) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2009.11.002 · Cited by 16
Suspension Stability and Fractal Patterns: A Comparison using Hydroxyapatite
Gao, F., Yang, S., Hao, P., & Evans, J. (2010) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2010.04149.x · Cited by 14
Cited by
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Tofail, S. A. M., Koumoulos, E. P., Bandyopadhyay, A., Bose, S., O’Donoghue, L., & Charitidis, C. (2018) · Materials Today · doi:10.1016/j.mattod.2017.07.001 · Cited by 2,136
3D printing of ceramics: A review
Chen, Z., Li, Z., Li, J., Liu, C., Lao, C., Fu, Y., Liu, C., Li, Y., Wang, P., & He, Y. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.11.013 · Cited by 2,109
Metadata
- Authors
- Travitzky, N., Bonet, A., Dermeik, B., Fey, T., Filbert‐Demut, I., Schlier, L., Schlordt, T., & Greil, P.
- Venue
- Advanced Engineering Materials
- Publisher
- Wiley
- Published
- 2014-04-08
- Volume
- 16
- Issue
- 6
- Pages
- 729-754
- ISSN
- 1438-1656 (ISSN-L)
- 1527-2648
- OpenAlex
- W1642712619
- Cited by
- 878
- References
- 100
- FWCI
- 43.71
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.