Fabrication of 3D biocompatible/biodegradable micro-scaffolds using dynamic mask projection microstereolithography

The design of scaffolds for use in tissue engineering. Part I. Traditional factors

Yang, S., Leong, K.-F., Du, Z., & Chua, C.-K. (2001) · Tissue Engineering · doi:10.1089/107632701753337645 · Cited by 2,234 · see citing works

Scaffold design and fabrication technologies for engineering tissues — state of the art and future perspectives

Hutmacher, D. W. (2001) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856201744489 · Cited by 1,412 · see citing works

Role of material surfaces in regulating bone and cartilage cell response

Boyan, B. D., Hummert, T. W., Dean, D. D., & Schwartz, Z. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85758-9 · Cited by 1,331 · see citing works

Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs

Leong, K. F., Cheah, C. M., & Chua, C. K. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00030-9 · Cited by 1,077 · see citing works

Projection micro-stereolithography using digital micro-mirror dynamic mask

Sun, C., Fang, N. X., Wu, D. M., & Zhang, X. (2005) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2004.12.011 · Cited by 885 · see citing works

Rapid prototyping & manufacturing— Fundamentals of stereolithography

Jacobs, P. F. (1993) · Journal of Manufacturing Systems · doi:10.1016/0278-6125(93)90311-g · Cited by 853 · see citing works

Use of stereolithography to manufacture critical‐sized 3D biodegradable scaffolds for bone ingrowth

Cooke, M. N., Fisher, J. P., Dean, D., Rimnac, C. M., & Mikos, A. G. (2002) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.10485 · Cited by 571 · see citing works

A Polymer Foam Conduit Seeded with Schwann Cells Promotes Guided Peripheral Nerve Regeneration

Hadlock, T. A., Sundback, C. A., Hunter, D. A., Cheney, M. L., & Vacanti, J. P. (2000) · Tissue Engineering · doi:10.1089/107632700320748 · Cited by 404 · see citing works

Engineering Bone Regeneration with Bioabsorbable Scaffolds with Novel Microarchitecture

Whang, K., Healy, K. E., Elenz, D. R., Nam, E. K., Tsai, D. C., Thomas, C. H., Nuber, G. W., Glorieux, F. H., Travers, R., & Sprague, S. M. (1999) · Tissue Engineering · doi:10.1089/ten.1999.5.35 · Cited by 401 · see citing works

Tissue ingrowth and degradation of two biodegradable porous polymers with different porosities and pore sizes

van Tienen, T. G., Heijkants, R. G. J. C., Buma, P., de Groot, J. H., Pennings, A. J., & Veth, R. P. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00280-0 · Cited by 270 · see citing works

Soft and hard tissue response to photocrosslinked poly(propylene fumarate) scaffolds in a rabbit model

Fisher, J. P., Vehof, J. W. M., Dean, D., van der Waerden, J. P. C. M., Holland, T. A., Mikos, A. G., & Jansen, J. A. (2001) · Journal of Biomedical Materials Research · doi:10.1002/jbm.1268 · Cited by 253 · see citing works

Real three dimensional micro fabrication using stereo lithography and metal molding

Ikuta, K., & Hirowatari, K. (2002) · Proceedings, IEEE micro electro mechanical systems · doi:10.1109/memsys.1993.296949 · Cited by 244 · see citing works

Two-photon-absorbed near-infrared photopolymerization for three-dimensional microfabrication

Maruo, S., & Kawata, S. (1998) · Journal of Microelectromechanical Systems · doi:10.1109/84.735349 · Cited by 217 · see citing works

Photocrosslinking characteristics and mechanical properties of diethyl fumarate/poly(propylene fumarate) biomaterials

Fisher, J. P., Dean, D., & Mikos, A. G. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00178-3 · Cited by 216 · see citing works

Crosslinking characteristics of an injectable poly(propylene fumarate)/?-tricalcium phosphate paste and mechanical properties of the crosslinked composite for use as a biodegradable bone cement

Peter, S. J., Kim, P., Yasko, A. W., Yaszemski, M. J., & Mikos, A. G. (1999) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(19990305)44:3 · Cited by 205 · see citing works

Microstereophotolithography using a liquid crystal display as dynamic mask-generator

Bertsch, A., Zissi, S., Jézéquel, J. Y., Corbel, S., & André, J. (1997) · Microsystem Technologies · doi:10.1007/s005420050053 · Cited by 188 · see citing works

Synthesis and properties of photocross-linked poly(propylene fumarate) scaffolds

Fisher, J. P., Holland, T. A., Dean, D., Engel, P. S., & Mikos, A. G. (2001) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856201316883476 · Cited by 175 · see citing works

Microstereolithography and other Fabrication Techniques for 3D MEMS

Varadan, V. K., Jiang, X., & Varadan, V. V. (2001) · Medical Entomology and Zoology · Cited by 165 · see citing works

Microfabrication of ceramic components by microstereolithography

Bertsch, A., Jiguet, S., & Renaud, P. (2003) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/14/2/005 · Cited by 161 · see citing works

Cure depth control for complex 3D microstructure fabrication in dynamic mask projection microstereolithography

Choi, J., Wicker, R. B., Cho, S., Ha, C., & Lee, S. (2009) · Rapid Prototyping Journal · doi:10.1108/13552540910925072 · Cited by 148 · see citing works

Matrix-Assisted Laser Desorption/Ionization Mass Spectrometry of Synthetic Polymers, 5. Analysis of Poly(propylene oxide)s by Coupled Liquid Chromatography at the Critical Point of Adsorption and MALDI-TOF Mass Spectrometry

Keil, C., Esser, E., & Pasch, H. (2001) · Macromolecular Materials and Engineering · doi:10.1002/1439-2054(20010301)286:3 · Cited by 122 · see citing works

Projection Microfabrication of Three-Dimensional Scaffolds for Tissue Engineering

Han, L., Mapili, G., Chen, S., & Roy, K. (2008) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.2823079 · Cited by 110 · see citing works

Kinetics of poly(propylene fumarate) synthesis by step polymerization of diethyl fumarate and propylene glycol using zinc chloride as a catalyst

Shung, A. K., Timmer, M. D., Jo, S., Engel, P. S., & Mikos, A. G. (2002) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856202753525963 · Cited by 91 · see citing works

Process planning method for mask projection micro‐stereolithography

Limaye, A. S., & Rosen, D. W. (2007) · Rapid Prototyping Journal · doi:10.1108/13552540710736759 · Cited by 86 · see citing works

Fabrication and characteristic analysis of a poly(propylene fumarate) scaffold using micro‐stereolithography technology

Lee, J. W., Lan, P. X., Kim, B. G., Lim, G., & Cho, D. (2008) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31057 · Cited by 80 · see citing works

Subregional slicing method to increase three-dimensional nanofabrication efficiency in two-photon polymerization

Park, S., Lee, S. H., Yang, D., Kong, H. J., & Lee, K.-S. (2005) · Applied Physics Letters · doi:10.1063/1.2103393 · Cited by 78 · see citing works

3D scaffold fabrication with PPF/DEF using micro-stereolithography

Lee, J., Lan, P. X., Kim, B. G., Lim, G., & Cho, D. (2007) · Microelectronic Engineering · doi:10.1016/j.mee.2007.01.267 · Cited by 77 · see citing works

A novel high-accuracy microstereolithography method employing an adaptive electro-optic mask

Farsari, M., Claret-Tournier, F., Huang, S., Chatwin, C. R., Budgett, D., Birch, P. M., Young, R. C. D., & Richardson, J. D. (2000) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(00)00672-5 · Cited by 72 · see citing works

Ultraprecise microreproduction of a three-dimensional artistic sculpture by multipath scanning method in two-photon photopolymerization

Yang, D., Park, S., Lim, T. W., Kong, H. J., Yi, S. W., Yang, H. K., & Lee, K.-S. (2007) · Applied Physics Letters · doi:10.1063/1.2425022 · Cited by 66 · see citing works

Fabrication and characterization of porous alginate/polyvinyl alcohol hybrid scaffolds for 3D cell culture

Cho, S.-H., Oh, S. H., & Lee, J. H. (2005) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/1568562054414658 · Cited by 66 · see citing works

Mass production of 3-D microstructures using projection microstereolithography

Ha, Y. M., Choi, J. W., & Lee, S. H. (2008) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-007-1031-8 · Cited by 56 · see citing works

Microstereolithography: concepts and applications

Bertsch, A., Bernhard, P., & Renaud, P. (2002) · IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) · doi:10.1109/etfa.2001.997697 · Cited by 55 · see citing works

Design of microstereolithography system based on dynamic image projection for fabrication of three-dimensional microstructures

Choi, J. W., Ha, Y. M., Lee, S. H., & Choi, K. H. (2006) · Journal of Mechanical Science and Technology · doi:10.1007/bf02916326 · Cited by 48 · see citing works

Synthesis and properties of UV-curable waterborne unsaturated polyester for wood coating

Jung, S.-J., Lee, S., Cho, W., & Ha, C. (1998) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19980725)69:4 · Cited by 48 · see citing works

Photoforming applied to fine machining

Takagi, T., & Nakajima, N. (2002) · Proceedings, IEEE micro electro mechanical systems · doi:10.1109/memsys.1993.296927 · Cited by 45 · see citing works

Processability characteristics and physico-mechanical properties of natural rubber modified with cashewnut shell liquid and cashewnut shell liquid–formaldehyde resin

Menon, A. R. R., Aigbodion, A. I., Pillai, C. K. S., Mathew, N. M., & Bhagawan, S. S. (2002) · European Polymer Journal · doi:10.1016/s0014-3057(01)00165-3 · Cited by 33 · see citing works

Properties of UV-curable polyurethane acrylates using nonyellowing polyisocyanate for floor coating

Ha, C., Jung, S.-J., Kim, E.-S., Kim, W.-S., Lee, S., & Cho, W. (1996) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19961114)62:7 · Cited by 29 · see citing works

Consideration on the producing of high aspect ratio micro parts using UV sensitive photopolymer

NAKAMOTO, T., Yamaguchi, K., & A., P. A. (2002) · doi:10.1109/mhs.1996.563401 · Cited by 26 · see citing works

Corrected Article: “Ultraprecise microreproduction of a three-dimensional artistic sculpture by multipath scanning method in two-photon photopolymerization” [Appl. Phys. Lett 90, 013113 (2007)]

Yang, D., Park, S., Lim, T. W., Kong, H. J., Yi, S. W., Yang, H. K., & Lee, K.-S. (2007) · Applied Physics Letters · doi:10.1063/1.2692435 · Cited by 17 · see citing works

Fabrication of 3-Dimensional Microstructures Using Dynamic Image Projection

Choi, J. W., Ha, Y. M., Choi, K. H., & Lee, S. H. (2007) · Key engineering materials · doi:10.4028/www.scientific.net/kem.339.473 · Cited by 11 · see citing works

A review on stereolithography and its applications in biomedical engineering

Melchels, F. P. W., Feijén, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,473 · see citing works

3D printing of ceramics: A review

Chen, Z., Li, Z., Li, J., Liu, C., Lao, C., Fu, Y., Liu, C., Li, Y., Wang, P., & He, Y. N. (2018) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.11.013 · Cited by 2,131 · see citing works

Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences

Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746 · see citing works

Recent advances in 3D printing of biomaterials

Chia, H. N., & Wu, B. M. (2015) · Journal of Biological Engineering · doi:10.1186/s13036-015-0001-4 · Cited by 1,734 · see citing works

Scaffolds for bone tissue engineering: state of the art and new perspectives

Roseti, L., Parisi, V., Petretta, M., Cavallo, C., Desando, G., Bartolotti, I., & Grigolo, B. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.05.017 · Cited by 1,320 · see citing works

A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering

Billiet, T., Vandenhaute, M., Schelfhout, J., Vlierberghe, S. V., & Dubruel, P. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.050 · Cited by 1,279 · see citing works

Additive Manufacturing of Ceramic‐Based Materials

Travitzky, N. A., Bonet, A., Dermeik, B., Fey, T., Filbert‐Demut, I., Schlier, L., Schlordt, T., & Greil, P. (2014) · Advanced Engineering Materials · doi:10.1002/adem.201400097 · Cited by 888 · see citing works

Microfabrication of complex porous tissue engineering scaffolds using 3D projection stereolithography

Gauvin, R., Chen, Y.-C., Lee, J. W., Soman, P., Zorlutuna, P., Nichol, J. W., Bae, H., Chen, S., & Khademhosseini, A. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.01.048 · Cited by 641 · see citing works

Polymers for additive manufacturing and 4D-printing: Materials, methodologies, and biomedical applications

González-Henríquez, C. M., Sarabia-Vallejos, M. A., & Rodriguez-Hernandez, J. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.03.001 · Cited by 562 · see citing works

Additive manufacturing by digital light processing: a review

Chaudhary, R., Fabbri, P., Leoni, E., Mazzanti, F., Akbari, R., & Antonini, C. (2022) · Progress in Additive Manufacturing · doi:10.1007/s40964-022-00336-0 · Cited by 473 · see citing works

Structural and material approaches to bone tissue engineering in powder-based three-dimensional printing

Butscher, A., Bohner, M., Hofmann, S., Gauckler, L. J., & Müller, R. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.09.039 · Cited by 457 · see citing works

Towards organoid culture without Matrigel

Kozlowski, M. T., Crook, C. J., & Ku, H. T. (2021) · Communications Biology · doi:10.1038/s42003-021-02910-8 · Cited by 409 · see citing works

Additive manufacturing techniques for the production of tissue engineering constructs

Mota, C., Puppi, D., Chiellini, E., & Chiellini, E. (2012) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1635 · Cited by 386 · see citing works

Let there be chip—towards rapid prototyping of microfluidic devices: one-step manufacturing processes

Waldbaur, A., Rapp, H., Länge, K., & Rapp, B. E. (2011) · Analytical Methods · doi:10.1039/c1ay05253e · Cited by 384 · see citing works

The Boom in 3D-Printed Sensor Technology

Xu, Y., Wu, X., Guo, X. P., Kong, B., Zhang, M., Qian, X., Mi, S., & Sun, W. (2017) · Sensors · doi:10.3390/s17051166 · Cited by 362 · see citing works

Bone tissue engineering scaffolding: computer-aided scaffolding techniques

Thavornyutikarn, B., Chantarapanich, N., Sitthiseripratip, K., Thouas, G. A., & Chen, Q. (2014) · Progress in Biomaterials · doi:10.1007/s40204-014-0026-7 · Cited by 326 · see citing works

Stereolithography in tissue engineering

Skoog, S. A., Goering, P. L., & Narayan, R. J. (2013) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-013-5107-y · Cited by 324 · see citing works

Developments of 3D Printing Microfluidics and Applications in Chemistry and Biology: a Review

He, Y., Wu, Y. L., Fu, J., Gao, Q., & Qiu, J. (2016) · Electroanalysis · doi:10.1002/elan.201600043 · Cited by 315 · see citing works

Advances in additive manufacturing for bone tissue engineering scaffolds

Madrid, A. P. M., Vrech, S. M., Sánchez, M. A., & Rodríguez, A. P. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.03.037 · Cited by 307 · see citing works

Additive Manufacturing of Batteries

Pang, Y., Cao, Y., Chu, Y., Liu, M., Snyder, K., MacKenzie, D., & Cao, C. C. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201906244 · Cited by 307 · see citing works

Multi-material stereolithography

Choi, J.-W., Kim, H.-C., & Wicker, R. B. (2010) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.10.003 · Cited by 307 · see citing works

3D printing: an emerging tool for novel microfluidics and lab-on-a-chip applications

Yazdi, A. A., Popma, A., Wong, W., Nguyen, T., Pan, Y., & Xu, J. (2016) · Microfluidics and Nanofluidics · doi:10.1007/s10404-016-1715-4 · Cited by 306 · see citing works

Laser Fabrication of Three-Dimensional CAD Scaffolds from Photosensitive Gelatin for Applications in Tissue Engineering

Ovsianikov, A., Deiwick, A., Vlierberghe, S. V., Dubruel, P., Möller, L., Dräger, G., & Chichkov, B. N. (2011) · Biomacromolecules · doi:10.1021/bm1015305 · Cited by 303 · see citing works

3D printing applications for transdermal drug delivery

Economidou, S. N., Lamprou, D. A., & Douroumis, D. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.01.031 · Cited by 273 · see citing works

3D printing antagonistic systems of artificial muscle using projection stereolithography

Peele, B. N., Wallin, T. J., Zhao, H., & Shepherd, R. F. (2015) · Bioinspiration & Biomimetics · doi:10.1088/1748-3190/10/5/055003 · Cited by 264 · see citing works

A review on fabricating tissue scaffolds using vat photopolymerization

Chartrain, N. A., Williams, C. B., & Whittington, A. R. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.05.010 · Cited by 256 · see citing works

Bioprinting of skin constructs for wound healing

He, P. C., Zhao, J., Zhang, J., Li, B., Gou, Z., Gou, M., & Li, X. (2018) · Burns & Trauma · doi:10.1186/s41038-017-0104-x · Cited by 241 · see citing works

Microneedles for Transdermal Biosensing: Current Picture and Future Direction

Ventrelli, L., Strambini, L. M., & Barillaro, G. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500450 · Cited by 238 · see citing works

Light-assisted direct-write of 3D functional biomaterials

Hribar, K. C., Soman, P., Warner, J., Chung, P., & Chen, S. (2013) · Lab on a Chip · doi:10.1039/c3lc50634g · Cited by 231 · see citing works

Architectural Design and Additive Manufacturing of Mechanical Metamaterials: A Review

Lu, C., Hsieh, M.-T., Huang, Z., Zhang, C., Lin, Y., Shen, Q., Chen, F., & Zhang, L. (2022) · Engineering · doi:10.1016/j.eng.2021.12.023 · Cited by 217 · see citing works

A Review of 3D Polymeric Scaffolds for Bone Tissue Engineering: Principles, Fabrication Techniques, Immunomodulatory Roles, and Challenges

Abdelaziz, A. G., Nageh, H., Abdo, S. M., Abdalla, M. S., Amer, A. A., Abdal‐hay, A., & Barhoum, A. (2023) · Bioengineering · doi:10.3390/bioengineering10020204 · Cited by 202 · see citing works

Sustainable Materials and Chemical Processes for Additive Manufacturing

Sanchez‐Rexach, E., Johnston, T. G., Jehanno, C., Sardón, H., & Nelson, A. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c02008 · Cited by 198 · see citing works

Biodegradable Polymers for Biomedical Additive Manufacturing

Puppi, D., & Chiellini, E. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2020.100700 · Cited by 192 · see citing works

Click chemistry stereolithography for soft robots that self-heal

Wallin, T. J., Pikul, J. H., Bodkhe, S., Peele, B. N., Murray, B. C. M., Therriault, D., McEnerney, B. W., Dillon, R. P., Giannelis, E. P., & Shepherd, R. F. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb01605k · Cited by 173 · see citing works

Direct Ink Writing Technology (3D Printing) of Graphene-Based Ceramic Nanocomposites: A Review

Pinargote, N. W. S., Smirnov, A., Peretyagin, N., Seleznev, A. E., & Peretyagin, P. Y. (2020) · Nanomaterials · doi:10.3390/nano10071300 · Cited by 172 · see citing works

Additive Manufacturing of Biomaterials − The Evolution of Rapid Prototyping

Touri, M., Kabirian, F., Saadati, M., Ramakrishna, S., & Mozafari, M. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201800511 · Cited by 170 · see citing works

3D Printing of Poly(propylene fumarate) Oligomers: Evaluation of Resin Viscosity, Printing Characteristics and Mechanical Properties

Luo, Y., Fer, G. L., Dean, D., & Becker, M. L. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b00076 · Cited by 158 · see citing works

Microstereolithography and characterization of poly(propylene fumarate)-based drug-loaded microneedle arrays

Lu, Y., Mantha, S. N., Crowder, D. C., Chinchilla, S., Shah, K. N., Yun, Y., Wicker, R. B., & Choi, J.-W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045001 · Cited by 151 · see citing works

Multi-material microstereolithography

Choi, J.-W., MacDonald, E. W., & Wicker, R. B. (2009) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-009-2434-8 · Cited by 149 · see citing works

Cure depth control for complex 3D microstructure fabrication in dynamic mask projection microstereolithography

Choi, J., Wicker, R. B., Cho, S., Ha, C., & Lee, S. (2009) · Rapid Prototyping Journal · doi:10.1108/13552540910925072 · Cited by 148 · see citing works

3D Photo-Fabrication for Tissue Engineering and Drug Delivery

Pereira, R. F., & Bártolo, P. (2015) · Engineering · doi:10.15302/j-eng-2015015 · Cited by 143 · see citing works

3D Printing of Cytocompatible Water-Based Light-Cured Polyurethane with Hyaluronic Acid for Cartilage Tissue Engineering Applications

Shie, M., Chang, W., Wei, L.-J., Huang, Y., Chen, C.-H., Shih, C., Chen, Y., & Shen, Y. (2017) · Materials · doi:10.3390/ma10020136 · Cited by 142 · see citing works

Digital light processing of 3Y-TZP strengthened ZrO2 ceramics

Zhang, K., He, R., Ding, G., Feng, C., Song, W., & Fang, D. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.138768 · Cited by 138 · see citing works

A review on additive manufacturing and its way into the oil and gas industry

Sireesha, M., Lee, J., Kiran, A. S., Babu, V. J., Kee, B. B. T., & Ramakrishna, S. (2018) · RSC Advances · doi:10.1039/c8ra03194k · Cited by 133 · see citing works

Poly(propylene fumarate)-based materials: Synthesis, functionalization, properties, device fabrication and biomedical applications

Cai, Z., Wan, Y., Becker, M. L., Long, Y.-Z., & Dean, D. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2019.03.038 · Cited by 133 · see citing works

Development and evaluation of Al2O3–ZrO2 composite processed by digital light 3D printing

Zheng, T., Wang, W., Sun, J., Liu, J., & Bai, J. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.12.102 · Cited by 125 · see citing works

Integrated carbon fiber electrodes within hollow polymer microneedles for transdermal electrochemical sensing

Miller, P. R., Gittard, S. D., Edwards, T. L., Lopez, D. M., Xiao, X., Wheeler, D. R., Monteiro-Riviere, N. A., Brozik, S. M., Polsky, R., & Narayan, R. J. (2011) · Biomicrofluidics · doi:10.1063/1.3569945 · Cited by 116 · see citing works

Design and 3D Printing of Hydrogel Scaffolds with Fractal Geometries

Warner, J., Soman, P., Zhu, W. Z., Tom, M., & Chen, S. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00140 · Cited by 109 · see citing works

Moisture based three-dimensional printing of calcium phosphate structures for scaffold engineering

Butscher, A., Bohner, M., Doebelin, N., Galea, L., Loeffel, O., & Müller, R. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.10.009 · Cited by 106 · see citing works

A Review of Critical Issues in High-Speed Vat Photopolymerization

Paral, S. K., Lin, D., Cheng, Y., Lin, S., & Jeng, J. (2023) · Polymers · doi:10.3390/polym15122716 · Cited by 106 · see citing works

A miniature flow sensor fabricated by micro-stereolithography employing a magnetite/acrylic nanocomposite resin

Leigh, S. J., Purssell, C. P., Bowen, J., Hutchins, D. A., Covington, J. A., & Billson, D. R. (2011) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2011.03.058 · Cited by 104 · see citing works

Stereolithography 3D printing technology in pharmaceuticals: a review

Deshmane, S., Kendre, P., Mahajan, H., & Jain, S. (2021) · Drug Development and Industrial Pharmacy · doi:10.1080/03639045.2021.1994990 · Cited by 103 · see citing works

Polymer brush hypersurface photolithography

Carbonell, C., Valles, D. J., Wong, A. M., Carlini, A. S., Touve, M. A., Korpanty, J., Gianneschi, N. C., & Braunschweig, A. B. (2020) · Nature Communications · doi:10.1038/s41467-020-14990-x · Cited by 97 · see citing works

4D printing technology in medical engineering: a narrative review

Sahafnejad-Mohammadi, I., Karamimoghadam, M., Zolfagharian, A., Akrami, M., & Bodaghi, M. (2022) · Journal of the Brazilian Society of Mechanical Sciences and Engineering · doi:10.1007/s40430-022-03514-x · Cited by 96 · see citing works

Shaping by microstereolithography and sintering of macro–micro-porous silicon substituted hydroxyapatite

Lasgorceix, M., Champion, É., & Chartier, T. (2015) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2015.11.020 · Cited by 95 · see citing works

Additive Manufacturing of Bovine Serum Albumin-Based Hydrogels and Bioplastics

Smith, P. T., Narupai, B., Tsui, J. H., Millik, S. C., Shafranek, R. T., Kim, D., & Nelson, A. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b01236 · Cited by 94 · see citing works

Multi-material, multi-technology stereolithography

Wicker, R. B., & MacDonald, E. W. (2012) · Virtual and Physical Prototyping · doi:10.1080/17452759.2012.721119 · Cited by 93 · see citing works

Synthesis and Biological Evaluation of Well-Defined Poly(propylene fumarate) Oligomers and Their Use in 3D Printed Scaffolds

Luo, Y., Dolder, C. K., Walker, J. M., Mishra, R., Dean, D., & Becker, M. L. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b00014 · Cited by 92 · see citing works

Force and slip detection with direct-write compliant tactile sensors using multi-walled carbon nanotube/polymer composites

Vatani, M., Engeberg, E. D., & Choi, J. (2013) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2013.03.019 · Cited by 91 · see citing works

Stereolithographic 3D Bioprinting for Biomedical Applications

Raman, R., & Bashir, R. (2015) · Elsevier eBooks · doi:10.1016/b978-0-12-800972-7.00006-2 · Cited by 88 · see citing works

Application of an addition–fragmentation-chain transfer monomer in di(meth)acrylate network formation to reduce polymerization shrinkage stress

Shah, P. K., Stansbury, J. W., & Bowman, C. N. (2017) · Polymer Chemistry · doi:10.1039/c7py00702g · Cited by 82 · see citing works

A pixel based solidification model for projection based stereolithography technology

Kang, H., Park, J., & Cho, D. (2012) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2012.01.016 · Cited by 77 · see citing works

Deposition of antimicrobial coatings on microstereolithography-fabricated microneedles

Gittard, S. D., Miller, P. R., Jin, C., Martin, T. N., Boehm, R. D., Chisholm, B. J., Stafslien, S. J., Daniels, J. W., Cilz, N., Monteiro-Riviere, N. A., et al. (2011) · JOM · doi:10.1007/s11837-011-0093-3 · Cited by 76 · see citing works

A practical guide to microfabrication and patterning of hydrogels for biomimetic cell culture scaffolds

Tenje, M., Cantoni, F., Hernández, A. M. P., Searle, S. S., Johansson, S., Barbe, L., Antfolk, M., & Pohlit, H. (2020) · Organs-on-a-Chip · doi:10.1016/j.ooc.2020.100003 · Cited by 73 · see citing works

Tilting separation analysis of bottom-up mask projection stereolithography based on cohesive zone model

Wu, X., Lian, Q., Li, D., & Jin, Z. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.12.016 · Cited by 73 · see citing works

Digital light processing of ceramics: an overview on process, materials and challenges

Mamatha, S., Biswas, P., & Johnson, R. (2022) · Progress in Additive Manufacturing · doi:10.1007/s40964-022-00379-3 · Cited by 69 · see citing works

Review of Rapid Prototyping Techniques for Tissue Engineering Scaffolds Fabrication

Abdelaal, O., & Darwish, S. M. (2012) · Advanced structured materials · doi:10.1007/978-3-642-31470-4_3 · Cited by 69 · see citing works

Additive manufacturing techniques for the fabrication of tissue engineering scaffolds: a review

Kumar, M., & Sharma, V. (2021) · Rapid Prototyping Journal · doi:10.1108/rpj-01-2021-0011 · Cited by 67 · see citing works

Biomaterials Adapted to Vat Photopolymerization in 3D Printing: Characteristics and Medical Applications

Timofticiuc, I.-A., Călinescu, O., Iftime, A., Dragosloveanu, Ş., Căruntu, A., Scheau, A.-E., Bădărău, I. A., Didilescu, A. C., Căruntu, C., & Scheau, C. (2023) · Journal of Functional Biomaterials · doi:10.3390/jfb15010007 · Cited by 65 · see citing works

Study of Physical and Degradation Properties of 3D-Printed Biodegradable, Photocurable Copolymers, PGSA-co-PEGDA and PGSA-co-PCLDA

Chen, J., Hwang, J. V., Ao-Ieong, W.-S., Lin, Y.-C., Hsieh, Y., Cheng, Y., & Wang, J. (2018) · Polymers · doi:10.3390/polym10111263 · Cited by 65 · see citing works

Recent trends and challenges in computer-aided design of additive manufacturing-based biomimetic scaffolds and bioartificial organs

Yoo, D.-J. (2014) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-014-0583-7 · Cited by 64 · see citing works

A compact LED-based projection microstereolithography for producing 3D microstructures

Behroodi, E., Latifi, H., & Najafi, F. (2019) · Scientific Reports · doi:10.1038/s41598-019-56044-3 · Cited by 62 · see citing works

A focused review on three-dimensional bioprinting technology for artificial organ fabrication

Panda, S., Hajra, S., Mistewicz, K., Nowacki, B., In-na, P., Krushynska, A. O., Mishra, Y. K., & Kim, H. J. (2022) · Biomaterials Science · doi:10.1039/d2bm00797e · Cited by 62 · see citing works

Advances in digital light processing of hydrogels

Mo, X., Ouyang, L., Xiong, Z., & Zhang, T. (2022) · Biomedical Materials · doi:10.1088/1748-605x/ac6b04 · Cited by 61 · see citing works

Hybrid additive manufacturing of 3D electronic systems

Li, J., Wasley, T. J., Nguyen, T. T., Ta, V. D., Shephard, J. D., Stringer, J., Smith, P., Esentürk, E., Connaughton, C., & Kay, R. W. (2016) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/26/10/105005 · Cited by 59 · see citing works

A Tuneable, Photocurable, Poly(Caprolactone)-Based Resin for Tissue Engineering—Synthesis, Characterisation and Use in Stereolithography

Field, J., Haycock, J. W., Boissonade, F. M., & Claeyssens, F. (2021) · Molecules · doi:10.3390/molecules26051199 · Cited by 57 · see citing works

Process and material behavior modeling for a new design of micro-additive fused deposition

Monzón, M., Gibson, I., Benítez, A. N., Lorenzo, L., Hernández-Castellano, P. M., & Marrero-Alemán, M. D. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4686-y · Cited by 56 · see citing works

Optimizing Process Parameters in Commercial Micro‐Stereolithography for Forming Emulsions and Polymer Microparticles in Nonplanar Microfluidic Devices

Männel, M. J., Selzer, L., Bernhardt, R., & Thiele, J. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201800408 · Cited by 54 · see citing works

Three-dimensional printing of energetic materials: A review

Zhang, J., He, K., Zhang, D., Dong, J.-D., Li, B., Liu, Y., Gao, G., & Jiang, Z. (2022) · Energetic Materials Frontiers · doi:10.1016/j.enmf.2022.04.001 · Cited by 49 · see citing works

Biofabrication of 3D cell-encapsulated tubular constructs using dynamic optical projection stereolithography

Wadnap, S., Krishnamoorthy, S., Zhang, Z., & Xu, C. (2019) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-019-6239-5 · Cited by 47 · see citing works

A Solvent and Initiator Free, Low-Modulus, Degradable Polyester Platform with Modular Functionality for Ambient-Temperature 3D Printing

Govindarajan, S. R., Xu, Y., Swanson, J. P., Jain, T., Lu, Y., Choi, J., & Joy, A. (2016) · Macromolecules · doi:10.1021/acs.macromol.5b02399 · Cited by 46 · see citing works

Scheduling and process planning for multiple material stereolithography

Kim, H.-C., Choi, J. W., & Wicker, R. B. (2010) · Rapid Prototyping Journal · doi:10.1108/13552541011049243 · Cited by 44 · see citing works

Injectable 3D Porous Micro‐Scaffolds with a Bio‐Engine for Cell Transplantation and Tissue Regeneration

Luo, Z., Pan, J., Sun, Y.-H., Zhang, S., Yang, Y., Liu, H., Li, Y., Xu, X. X., Sui, Y., & Wei, S. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201804335 · Cited by 44 · see citing works

Reducing lateral stair-stepping defects in liquid crystal display-based vat photopolymerization by defocusing the image pattern

Shan, Y., Krishnakumar, A., Qin, Z., & Mao, H. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.102653 · Cited by 43 · see citing works

Prediction of tensile performance for 3D printed photopolymer gyroid lattices using structural porosity, base material properties, and machine learning

Peloquin, J., Kirillova, A., Rudin, C. D., Brinson, L. C., & Gall, K. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.112126 · Cited by 43 · see citing works

Poly(propylene fumarate) stars, using architecture to reduce the viscosity of 3D printable resins

Fer, G. L., Luo, Y., & Becker, M. L. (2019) · Polymer Chemistry · doi:10.1039/c9py00738e · Cited by 43 · see citing works

Additive technologies for making highly permeable inorganic materials with tailored morphological architectonics for medicine

Ievlev, V. M., Putlyaev, V. I., Safronova, T. V., & Evdokimov, P. V. (2015) · Inorganic Materials · doi:10.1134/s0020168515130038 · Cited by 42 · see citing works

Computer-aided microfluidics (CAMF): from digital 3D-CAD models to physical structures within a day

Waldbaur, A., Carneiro, B., Hettich, P., Wilhelm, E., & Rapp, B. E. (2013) · Microfluidics and Nanofluidics · doi:10.1007/s10404-013-1177-x · Cited by 41 · see citing works

Scalable 3D printing of aperiodic cellular structures by rotational stacking of integral image formation

Kim, S., Handler, J. J., Cho, Y. T., Barbastathis, G., & Fang, N. X. (2021) · Science Advances · doi:10.1126/sciadv.abh1200 · Cited by 40 · see citing works

Meniscus process optimization for smooth surface fabrication in Stereolithography

Pan, Y., & Chen, Y. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.05.004 · Cited by 40 · see citing works

Review: 3D printing hydrogels for the fabrication of soilless cultivation substrates

Kalossaka, L. M., Sena, G., Barter, L. M. C., & Myant, C. (2021) · Applied Materials Today · doi:10.1016/j.apmt.2021.101088 · Cited by 38 · see citing works

3D printing of biocomposites for osteochondral tissue engineering

Vyas, C., Poologasundarampillai, G., Hoyland, J. A., & Bártolo, P. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100752-5.00013-5 · Cited by 37 · see citing works

3D printing of biofiber-reinforced composites and their mechanical properties: a review

Jiang, L., Peng, X., & Walczyk, D. (2020) · Rapid Prototyping Journal · doi:10.1108/rpj-08-2019-0214 · Cited by 37 · see citing works

Photopolymerization-based additive manufacturing for the development of 3D porous scaffolds

Husár, B., Hatzenbichler, M., Mironov, V. A., Liska, R., Stampfl, J., & Ovsianikov, A. (2014) · Elsevier eBooks · doi:10.1533/9780857098104.2.149 · Cited by 37 · see citing works

Hydrolytically Degradable Poly(β‐amino ester) Resins with Tunable Degradation for 3D Printing by Projection Micro‐Stereolithography

Muralidharan, A., McLeod, R. R., & Bryant, S. J. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202106509 · Cited by 36 · see citing works

Photoinitiator Selection and Concentration in Photopolymer Formulations towards Large-Format Additive Manufacturing

Stiles, A., Tison, T.-A., Pruitt, L., & Vaidya, U. K. (2022) · Polymers · doi:10.3390/polym14132708 · Cited by 35 · see citing works

Design and rapid prototyping of DLC coated fractal surfaces for tissue engineering applications

Lantada, A. D., Mosquera, A. J. S., Endrino, J. L., & Lafont, P. (2010) · Journal of Physics Conference Series · doi:10.1088/1742-6596/252/1/012003 · Cited by 33 · see citing works

Porous cage-derived nanomaterial inks for direct and internal three-dimensional printing

Aubert, T., Huang, J., Ma, K., Hanrath, T., & Wiesner, U. B. (2020) · Nature Communications · doi:10.1038/s41467-020-18495-5 · Cited by 32 · see citing works

Additive manufacturing of hydroxyapatite and its composite materials: A review

Yan, C., Ma, G., Chen, A., Chen, Y. G., Wu, J., Wang, W., Yang, S., & Shi, Y. (2020) · Journal of Micromechanics and Molecular Physics · doi:10.1142/s2424913020300029 · Cited by 32 · see citing works

Terahertz plasmonic waveguide based on metal rod arrays for nanofilm sensing

You, B., Peng, C.-C., Jhang, J.-S., Chen, H.-H., Yu, C.-P., Lai, W., Liu, T.-A., Peng, J.-L., & Lu, J.-Y. (2014) · Optics Express · doi:10.1364/oe.22.011340 · Cited by 31 · see citing works

Fabrication of Complex 3D Micro-Scale Scaffolds and Drug Delivery Devices using Dynamic Mask Projection Microstereolithography

Choi, J. W., Park, I. B., Wicker, R. B., Lee, S. H., & Kim, H.-C. (2008) · Texas Digital Library (University of Texas) · doi:10.26153/tsw/15075

Scaffold Fabrication with Biodegradable Poly(propylene fumarate) Using Microstereolithography

Lee, J. W., Kim, B. G., Lim, G. B., & Cho, D. (2007) · Key engineering materials · doi:10.4028/www.scientific.net/kem.342-343.141 · Cited by 9 · see citing works

Fabrication and characteristic analysis of a poly(propylene fumarate) scaffold using micro‐stereolithography technology

Lee, J. W., Lan, P. X., Kim, B. G., Lim, G., & Cho, D. (2008) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31057 · Cited by 80 · see citing works

3D scaffold fabrication with PPF/DEF using micro-stereolithography

Lee, J., Lan, P., Kim, B., Lim, G., Cho, D., & 임근배 (2007) · Open Access System for Information Sharing (Pohang University of Science and Technology) · doi:10.1016/j.mee.2007.0

Multi-material microstereolithography

Choi, J.-W., MacDonald, E. W., & Wicker, R. B. (2009) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-009-2434-8 · Cited by 149 · see citing works