The DOI matches its Crossref record; 101 of the 101 references it cites were found in a registry or an index.
Porous Titanium Implants: A Review
Abstract
Titanium and its alloys are commonly used in almost all disciplines of medicine because of their sufficient biocompatibility and meeting of mechanical requirements. However, dense metallic biomaterials represent only an interfacial connection with host tissue, may develop stress shielding which causes ingrowth of the fibrous tissue, and are prone to microbial adhesion and development of biomaterial associated infections. Therefore, development of a new, porous titanium biomaterial is proposed to improve an implant's interconnection with bone, provide better stabilization, and reduce the risk of the loss of the implant. In this review, recent findings in porous titanium biomaterials engineering are discussed, including the structural and strengthening aspects of titanium alloys. The porosity and design of porous structures, as well as the optimization process are also described. An extensive part of this section is dedicated to manufacturing processes. The next section of the review is devoted to osseointegration of porous implants and surface treatment processes, whose purpose are antibacterial activity or local drug delivery. Summarizing the article, some future predictions have been presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Projections of Primary and Revision Hip and Knee Arthroplasty in the United States from 2005 to 2030
Kurtz, S., Ong, K., Lau, E., Mowat, F., & Halpern, M. (2007) · The Journal of Bone and Joint Surgery-American Volume · doi:10.2106/00004623-200704000-00012 · Cited by 8,698
Cellular solids: Structure and properties
Wolcott, M. P. (1990) · Materials Science and Engineering: A · doi:10.1016/0921-5093(90)90295-e · Cited by 5,926
Porous scaffold design for tissue engineering
Hollister, S. J. (2005) · Nature Materials · doi:10.1038/nmat1421 · Cited by 3,969
Guideline for Prevention of Surgical Site Infection, 1999
Mangram, A. J., Horan, T. C., Pearson, M. L., Silver, L. C., & Jarvis, W. R. (1999) · American Journal of Infection Control · doi:10.1016/s0196-6553(99)70088-x · Cited by 2,881
Mangram, A. J., Horan, T. C., Pearson, M. L., Silver, L. C., & Jarvis, W. R. (1999) · PubMed · Cited by 2,783
Surface treatments of titanium dental implants for rapid osseointegration
Le Guéhennec, L., Soueidan, A., Layrolle, P., & Amouriq, Y. (2007) · Dental Materials · doi:10.1016/j.dental.2006.06.025 · Cited by 2,406
Osseointegration and its experimental background
Branemark, P.-I. (1983) · The Journal of Prosthetic Dentistry · doi:10.1016/s0022-3913(83)80101-2 · Cited by 2,084
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874
Leuders, S., Thöne, M., Riemer, A., Niendorf, T., Tröster, T., Richard, H. A., & Maier, H. J. (2013) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2012.11.011 · Cited by 1,475
Improved Docking of Polypeptides with Glide
Tubert-Brohman, I., Sherman, W., Repasky, M., & Beuming, T. (2013) · Journal of Chemical Information and Modeling · doi:10.1021/ci400128m · Cited by 1,308
Biomimetic porous scaffolds for bone tissue engineering
Wu, S., Liu, X., Yeung, K. W. K., Liu, C., & Yang, X. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.04.001 · Cited by 1,159
Mechanical behavior of additive manufactured, powder-bed laser-fused materials
Mower, T. M., & Long, M. J. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.10.068 · Cited by 1,001
Taniguchi, N., Fujibayashi, S., Takemoto, M., Sasaki, K., Otsuki, B., Nakamura, T., Matsushita, T., Kokubo, T., & Matsuda, S. (2016) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.10.069 · Cited by 960
Sing, S. L., An, J., Yeong, W. Y., & Wiria, F. E. (2016) · Journal of Orthopaedic Research · doi:10.1002/jor.23075 · Cited by 942
Fatigue performance evaluation of selective laser melted Ti–6Al–4V
Edwards, P., & Ramulu, M. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.01.041 · Cited by 874
Comparison of metal release from various metallic biomaterials in vitro
Okazaki, Y., & Gotoh, E. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.02.005 · Cited by 862
Matsuno, H. (2001) · Biomaterials · doi:10.1016/s0142-9612(00)00275-1 · Cited by 828
Novel Magnesium Alloys Developed for Biomedical Application: A Review
Li, N., & Zheng, Y. (2013) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2013.02.005 · Cited by 744
Obesity and health‐related quality of life
Fontaine, K. R., & Barofsky, I. (2001) · Obesity Reviews · doi:10.1046/j.1467-789x.2001.00032.x · Cited by 743
Microstructure and Mechanical Properties of Wire and Arc Additive Manufactured Ti-6Al-4V
Wang, F., Williams, S., Colegrove, P., & Antonysamy, A. A. (2013) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-012-1444-6 · Cited by 737
Raphel, J., Holodniy, M., Goodman, S. B., & Heilshorn, S. C. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.016 · Cited by 674
Yield strain behavior of trabecular bone
Kopperdahl, D. L., & Keaveny, T. M. (1998) · Journal of Biomechanics · doi:10.1016/s0021-9290(98)00057-8 · Cited by 653
Murr, L. E., Gaytan, S. M., Medina, F., Lopez, H., Martinez, E., Machado, B. I., Hernandez, D. H., Martinez, L., Lopez, M. I., Wicker, R. B., et al. (2010) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2010.0010 · Cited by 636
Diagnosis and treatment of infections associated with fracture-fixation devices
Trampuz, A., & Zimmerli, W. (2006) · Injury · doi:10.1016/j.injury.2006.04.010 · Cited by 631
Control of encapsulation efficiency and initial burst in polymeric microparticle systems
Yeo, Y., & Park, K. (2004) · Archives of Pharmacal Research · doi:10.1007/bf02980037 · Cited by 567
Powder metallurgy of titanium – past, present, and future
Fang, Z. Z., Paramore, J. D., Sun, P., Chandran, K. S. R., Zhang, Y., Xia, Y., Cao, F., Koopman, M., & Free, M. (2018) · International Materials Reviews · doi:10.1080/09506608.2017.1366003 · Cited by 555
Current wound healing procedures and potential care
Dreifke, M. B., Jayasuriya, A. A., & Jayasuriya, A. C. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.12.068 · Cited by 538
Current trends in the design of scaffolds for computer-aided tissue engineering
Giannitelli, S. M., Accoto, D., Trombetta, M., & Rainer, A. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.024 · Cited by 451
Lam, C. X. F., Savalani, M. M., Teoh, S.-H., & Hutmacher, D. W. (2008) · Biomedical Materials · doi:10.1088/1748-6041/3/3/034108 · Cited by 444
Gosheger, G., Hardes, J., Ahrens, H., Streitburger, A., Buerger, H., Erren, M., Gunsel, A., Kemper, F. H., Winkelmann, W., & von Eiff, C. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2004.01.008 · Cited by 441
Antibacterial titanium surfaces for medical implants
Ferraris, S., & Spriano, S. (2016) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.12.062 · Cited by 424
Scaffold Design and Manufacturing: From Concept to Clinic
Hollister, S. J. (2009) · Advanced Materials · doi:10.1002/adma.200802977 · Cited by 408
Current trends in dental implants
Gaviria, L., Salcido, J. P., Guda, T., & Ong, J. L. (2014) · Journal of the Korean Association of Oral and Maxillofacial Surgeons · doi:10.5125/jkaoms.2014.40.2.50 · Cited by 407
Additive Manufacturing of Metal Structures at the Micrometer Scale
Hirt, L., Reiser, A., Spolenak, R., & Zambelli, T. (2017) · Advanced Materials · doi:10.1002/adma.201604211 · Cited by 400
The Additive Manufacturing (AM) of titanium alloys
Dutta, B., & Froes, F. H. (. (2017) · Metal Powder Report · doi:10.1016/j.mprp.2016.12.062 · Cited by 400
Effects of Medium Perfusion Rate on Cell-Seeded Three-Dimensional Bone Constructs in Vitro
Cartmell, S. H., Porter, B. D., García, A. J., & Guldberg, R. E. (2003) · Tissue Engineering · doi:10.1089/10763270360728107 · Cited by 387
Problems and solutions in machining of titanium alloys
Pramanik, A. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-013-5326-x · Cited by 382
Mei, S., Wang, H., Wang, W., Tong, L., Pan, H., Ruan, C., Ma, Q., Liu, M., Yang, H., Zhang, L., et al. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.02.005 · Cited by 368
Byrne, D. P., Lacroix, D., Planell, J. A., Kelly, D. J., & Prendergast, P. J. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.09.003 · Cited by 362
Fatigue behavior of porous biomaterials manufactured using selective laser melting
Amin Yavari, S., Wauthle, R., van der Stok, J., Riemslag, A. C., Janssen, M., Mulier, M., Kruth, J. P., Schrooten, J., Weinans, H., & Zadpoor, A. A. (2013) · Materials Science and Engineering: C · doi:10.1016/j.msec.2013.08.006 · Cited by 357
Hrabe, N., Gnäupel-Herold, T., & Quinn, T. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.04.022 · Cited by 355
Antibacterial Surface Treatment for Orthopaedic Implants
Gallo, J., Holinka, M., & Moucha, C. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms150813849 · Cited by 344
Campoccia, D., Montanaro, L., & Arciola, C. R. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.07.048 · Cited by 340
Cluster of Bacteria Associated with Peri‐Implantitis
Persson, G. R., & Renvert, S. (2014) · Clinical Implant Dentistry and Related Research · doi:10.1111/cid.12052 · Cited by 337
Vascularized Bone Tissue Engineering: Approaches for Potential Improvement
Nguyen, L. H., Annabi, N., Nikkhah, M., Bae, H., Binan, L., Park, S., Kang, Y., Yang, Y., & Khademhosseini, A. (2012) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2012.0012 · Cited by 313
Antimicrobial titanium/silver PVD coatings on titanium
Ewald, A., Glückermann, S. K., Thull, R., & Gbureck, U. (2006) · BioMedical Engineering OnLine · doi:10.1186/1475-925x-5-22 · Cited by 281
Cytotoxicity of Titanium and Titanium Alloying Elements
Li, Y., Wong, C. S., Xiong, J., Hodgson, P. D., & Wen, C. (2010) · Journal of Dental Research · doi:10.1177/0022034510363675 · Cited by 279
Metals for bone implants. Part 1. Powder metallurgy and implant rendering
Andani, M. T., Shayesteh Moghaddam, N., Haberland, C., Dean, D., Miller, M. J., & Elahinia, M. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.06.025 · Cited by 258
Truscello, S., Kerckhofs, G., Bael, S. V., Pyka, G., Schrooten, J., & Oosterwyck, H. V. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.12.021 · Cited by 229
Coelho, P. G., Jimbo, R., Tovar, N., & Bonfante, E. A. (2015) · Dental Materials · doi:10.1016/j.dental.2014.10.007 · Cited by 222
Sudarmadji, N., Tan, J. Y., Leong, K. F., Chua, C. K., & Loh, Y. T. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.09.024 · Cited by 220
An image-based approach for designing and manufacturing craniofacial scaffolds
Hollister, S. J., Levy, R. A., Chu, T.-M., Halloran, J. W., & Feinberg, S. E. (2000) · International Journal of Oral and Maxillofacial Surgery · doi:10.1034/j.1399-0020.2000.290115.x · Cited by 219
Li, Y., Yang, W., Li, X., Zhang, X., Wang, C., Meng, X., Pei, Y., Fan, X., Lan, P., Wang, C., et al. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00331 · Cited by 210
Chang, B., Song, W., Han, T., Yan, J., Li, F., Zhao, L., Kou, H., & Zhang, Y. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.01.022 · Cited by 208
Biofilm-Based Implant Infections in Orthopaedics
Arciola, C. R., Campoccia, D., Ehrlich, G. D., & Montanaro, L. (2015) · Advances in Experimental Medicine and Biology · doi:10.1007/978-3-319-11038-7_2 · Cited by 187
(2015) · Elsevier eBooks · doi:10.1016/c2013-0-13619-7 · Cited by 180
Cytocompatibility of various metal and development of new titanium alloys for medical implants
Okazaki, Y., Rao, S., Tateishi, T., & Ito, Y. (1998) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(97)00809-5 · Cited by 173
Morphogenesis of peri‐implant mucosa revisited: an experimental study in humans
Tomasi, C., Tessarolo, F., Caola, I., Wennström, J., Nollo, G., & Berglundh, T. (2014) · Clinical Oral Implants Research · doi:10.1111/clr.12223 · Cited by 169
Yavari, S. A., Loozen, L. D., Paganelli, F. L., Bakhshandeh, S., Lietaert, K., Groot, J. A., Fluit, A. C., Boel, C. H. E., Alblas, J., Vogely, H. C., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b03152 · Cited by 158
Li, G., Cao, H., Zhang, W., Ding, X., Yang, G., Qiao, Y., Liu, X., & Jiang, X. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10633 · Cited by 157
Chen, J., Zhang, X., Huang, C., Cai, H., Hu, S., Wan, Q., Pei, X., & Wang, J. (2017) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35960 · Cited by 150
Wieding, J., Lindner, T., Bergschmidt, P., & Bader, R. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2014.12.010 · Cited by 145
Surface-Mediated Bone Tissue Morphogenesis from Tunable Nanolayered Implant Coatings
Shah, N. J., Hyder, M. N., Moskowitz, J., Quadir, M., Morton, S. W., Seeherman, H. J., Padera, R. F., Spector, M., & Hammond, P. T. (2013) · Science Translational Medicine · doi:10.1126/scitranslmed.3005576 · Cited by 140
Procedural function-based modelling of volumetric microstructures
Pasko, A., Fryazinov, O., Vilbrandt, T., Fayolle, P., & Adzhiev, V. (2011) · Graphical Models · doi:10.1016/j.gmod.2011.03.001 · Cited by 139
Mimicking the nanostructure of bone matrix to regenerate bone
Kane, R. J., & Ma, P. X. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.001 · Cited by 131
Jia, Z., Xiu, P., Xiong, P., Zhou, W., Cheng, Y., Wei, S., Zheng, Y., Xi, T., Cai, H., Liu, Z., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10473 · Cited by 117
Fabrication of novel TiZr alloy foams for biomedical applications
Wen, C., Yamada, Y., & Hodgson, P. D. (2005) · Materials Science and Engineering C · doi:10.1016/j.msec.2005.08.006 · Cited by 110
Effects of simulated inflammation on the corrosion of 316L stainless steel
Brooks, E. K., Brooks, R. P., & Ehrensberger, M. T. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.10.012 · Cited by 108
Cahill, S., Lohfeld, S., & McHugh, P. E. (2009) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-009-3693-5 · Cited by 93
Matena, J., Petersen, S., Gieseke, M., Kampmann, A., Teske, M., Beyerbach, M., Escobar, H. M., Haferkamp, H., Gellrich, N., & Nolte, I. J. A. (2015) · International Journal of Molecular Sciences · doi:10.3390/ijms16047478 · Cited by 92
Synthetic scaffold morphology controls human dermal connective tissue formation
Wang, H., Pieper, J., Péters, F. L. A. M. A., van Blitterswijk, C., & Lamme, E. N. (2005) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30232 · Cited by 92
Thote, A. J., Chappell, J. T., Kumar, R., & Gupta, R. B. (2005) · Drug Development and Industrial Pharmacy · doi:10.1081/ddc-43985 · Cited by 89
In vitro studies of nanosilver-doped titanium implants for oral and maxillofacial surgery
Pokrowiecki, R., Zaręba, T., Szaraniec, B., Pałka, K., Mielczarek, A. B., Menaszek, E., & Tyski, S. S. (2017) · International Journal of Nanomedicine · doi:10.2147/ijn.s131163 · Cited by 85
Self-citationEffects of Ti, Al and V Concentrations on Cell Viability
Okazaki, Y., Rao, S., Asao, S., Tateishi, T., Katsuda, S., & Furuki, Y. (1998) · Materials Transactions JIM · doi:10.2320/matertrans1989.39.1053 · Cited by 82
A Novel Manufacturing Route for Fabrication of Topologically‐Ordered Porous Magnesium Scaffolds
Nguyen, T. L., Staiger, M. P., Dias, G. J., & Woodfield, T. B. F. (2011) · Advanced Engineering Materials · doi:10.1002/adem.201100029 · Cited by 82
Rodrigo, D., Martín, C., & Sanz, M. (2011) · Clinical Oral Implants Research · doi:10.1111/j.1600-0501.2011.02294.x · Cited by 81
Wong, J. Y., & Bronzino, J. D. (2007) · CRC Press eBooks · doi:10.1201/9780849378898 · Cited by 80
Meyer, F., Wardale, J., Best, S. M., Cameron, R. E., Rushton, N., & Brooks, R. A. (2011) · Journal of Orthopaedic Research® · doi:10.1002/jor.22019 · Cited by 78
Inzana, J. A., Varga, P., & Windolf, M. (2016) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2016.04.021 · Cited by 78
Percutaneous implants with porous titanium dermal barriers: An in vivo evaluation of infection risk
Isackson, D., McGill, L. D., & Bachus, K. N. (2010) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2010.11.007 · Cited by 60
Ho, Y., Huang, F., & Chang, Y. (2007) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.30801 · Cited by 58
Hierarchically structured titanium foams for tissue scaffold applications
Singh, R., Lee, P. D., Jones, J. R., Poologasundarampillai, G., Post, T., Lindley, T. C., & Dashwood, R. J. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.06.027 · Cited by 51
Unosson, E., Rius, D. R., Welch, K., & Engqvist, H. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.048 · Cited by 49
Badar, M., Rahim, M. I., Kieke, M., Ebel, T., Rohde, M., Häuser, H., Behrens, P. J., & Mueller, P. P. (2014) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35358 · Cited by 47
Zhao, C., Zhu, X., Yuan, T., et al. (2009) · Materials Science and Engineering C · doi:10.1016/j.msec.2009.09.004 · Cited by 45
Cabal, B., Cafini, F., Esteban‐Tejeda, L., Alou, L., Bartolomé, J. F., Sevillano, D., López‐Píriz, R., Torrecillas, R., & Moya, J. S. (2012) · PLoS ONE · doi:10.1371/journal.pone.0042393 · Cited by 42
Jung, J. W., Yi, H., Kang, T.-Y., Yong, W.-J., Jin, S., Yun, W., & Cho, D. (2013) · Journal of Biomechanical Engineering · doi:10.1115/1.4024570 · Cited by 40
MATERIALS: ENGINEERING, SCIENCE, PROCESSING AND DESIGN
Mackay, S. (2011) · Proceedings of the Institution of Civil Engineers - Construction Materials · doi:10.1680/coma.1000013 · Cited by 39
Przekora, A., & Ginalska, G. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.12.066 · Cited by 39
Overview of Procurement, Processing, and Sterilization of Soft Tissue Allografts for Sports Medicine
Suarez, L. S., & Richmond, J. C. (2007) · Sports Medicine and Arthroscopy Review · doi:10.1097/jsa.0b013e3180dca1fe · Cited by 36
Pandithevan, P., & Kumar, G. S. (2009) · Virtual and Physical Prototyping · doi:10.1080/17452750903055512 · Cited by 32
Increased collagen degradation around loosened total hip replacement implants
Ma, G., Ali, A., Verzijl, N., Hanemaaijer, R., TeKoppele, J. M., Konttinen, Y. T., & Salo, J. (2006) · Arthritis & Rheumatism · doi:10.1002/art.22064 · Cited by 31
Ceramic modifications of porous titanium: Effects on macrophage activation
Scislowska-Czarnecka, A., Menaszek, E., Szaraniec, B., & Kołaczkowska, E. (2012) · Tissue and Cell · doi:10.1016/j.tice.2012.08.002 · Cited by 30
Hatamleh, M. M., Bhamrah, G., Ryba, F. M., Mack, G. J., & Huppa, C. (2016) · Journal of Craniofacial Surgery · doi:10.1097/scs.0000000000003039 · Cited by 30
Inhibitory effect of Ti-Ag alloy on artificial biofilm formation
Nakajo, K., Takahashi, M., KIKUCHI, M., Takada, Y., Okuno, O., Sasaki, K., & Takahashi, N. (2014) · Dental Materials Journal · doi:10.4012/dmj.2013-334 · Cited by 29
Biomimetic modeling and three-dimension reconstruction of the artificial bone
Chen, Z., Su, Z., Ma, S., Wu, X., & Luo, Z. (2007) · Computer Methods and Programs in Biomedicine · doi:10.1016/j.cmpb.2007.08.001 · Cited by 29
MORITA, Y., Imai, S., Hanyuda, A., Matin, K., Hanada, N., & Nakamura, Y. (2014) · Dental Materials Journal · doi:10.4012/dmj.2013-216 · Cited by 24
Isackson, D., Cook, K. J., McGill, L. D., & Bachus, K. N. (2012) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2012.08.002 · Cited by 22
Sternberg, K., Petersen, S., Grabow, N., Senz, V., zu Schwabedissen, H. E. M., Kroemer, H. K., & Schmitz, K. (2013) · Biomedizinische Technik/Biomedical Engineering · doi:10.1515/bmt-2012-0049 · Cited by 22
Cabral, F. J., Fotoran, W. L., & Wunderlich, G. (2012) · PLoS ONE · doi:10.1371/journal.pone.0029881 · Cited by 19
Тиунова, А. А., Komissarova, N. V., Bezryadnov, D. V., & Анохин, К. В. (2016) · Bulletin of Experimental Biology and Medicine · doi:10.1007/s10517-016-3529-5 · Cited by 9
Cited by
A Review on Biomedical Titanium Alloys: Recent Progress and Prospect
Zhang, L., & Chen, L. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201801215 · Cited by 1,100
Zhang, L.-C., Chen, L.-Y., & Wang, L. (2020) · Advanced Engineering Materials · doi:10.1002/adem.201901258 · Cited by 456
Recent Development in Beta Titanium Alloys for Biomedical Applications
Chen, L.-Y., Cui, Y.-W., & Zhang, L.-C. (2020) · Metals · doi:10.3390/met10091139 · Cited by 330
Orthopedic implants and devices for bone fractures and defects: Past, present and perspective
Kim, T., See, C. W., Li, X., & Zhu, D. (2020) · Engineered Regeneration · doi:10.1016/j.engreg.2020.05.003 · Cited by 307
Quinn, J., McFadden, R., Chan, C.-W., & Carson, L. (2020) · iScience · doi:10.1016/j.isci.2020.101745 · Cited by 285
Metadata
- Authors
- Pałka, K., & Pokrowiecki, R.
- Venue
- Advanced Engineering Materials
- Publisher
- Wiley
- Published
- 2018-01-15
- Volume
- 20
- Issue
- 5
- ISSN
- 1438-1656 (ISSN-L)
- 1527-2648
- OpenAlex
- W2783203476
- Cited by
- 279
- References
- 101
- FWCI
- 7.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.