The DOI matches its Crossref record; 86 of the 86 references it cites were found in a registry or an index.
Additive Manufacturing of Titanium Alloys by Electron Beam Melting: A Review
Abstract
Electron beam melting (EBM), as one of metal additive manufacturing technologies, is considered to be an innovative industrial production technology. Based on the layer‐wise manufacturing technique, as‐produced parts can be fabricated on a powder bed using the 3D computational design method. Because the melting process takes place in a vacuum environment, EBM technology can produce parts with higher densities compared to selective laser melting (SLM), particularly when titanium alloy is used. The ability to produce higher quality parts using EBM technology is making EBM more competitive. After briefly introducing the EBM process and the processing factors involved, this paper reviews recent progress in the processing, microstructure, and properties of titanium alloys and their composites manufactured by EBM. The paper describes significant positive progress in EBM of all types of titanium in terms of solid bulk and porous structures including Ti–6Al–4V and Ti–24Nb–4Zr–8Sn, with a focus on manufacturing using EBM and the resultant unique microstructure and service properties (mechanical properties, fatigue behaviors, and corrosion resistance properties) of EBM‐produced titanium alloys.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Titanium alloys in total joint replacement—a materials science perspective
Long, M., & Rack, H. J. (1998) · Biomaterials · doi:10.1016/s0142-9612(97)00146-4 · Cited by 3,510
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
The metallurgy and processing science of metal additive manufacturing
Sames, W. J., List, F. A., Pannala, S., Dehoff, R. R., & Babu, S. S. (2016) · International Materials Reviews · doi:10.1080/09506608.2015.1116649 · Cited by 2,529
Mechanical properties of biomedical titanium alloys
Niinomi, M. (1998) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(97)00806-x · Cited by 2,157
Wang, X., Xu, S., Zhou, S., Xu, W., Leary, M., Choong, P., Qian, M., Brandt, M., & Xie, Y. M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.012 · Cited by 2,121
Olakanmi, E. O., Cochrane, R. F., & Dalgarno, K. W. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.03.002 · Cited by 1,742
Fabrication methods of porous metals for use in orthopaedic applications
Ryan, G., Pandit, A., & Apatsidis, D. P. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.12.002 · Cited by 1,391
Binding mechanisms in selective laser sintering and selective laser melting
Kruth, J., Mercelis, P., Van Vaerenbergh, J., Froyen, L., & Rombouts, M. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573365 · Cited by 1,383
Design and mechanical properties of new β type titanium alloys for implant materials
Kuroda, D., Niinomi, M., Morinaga, M., Kato, Y., & Yashiro, T. (1998) · Materials Science and Engineering A · doi:10.1016/s0921-5093(97)00808-3 · Cited by 1,323
HUISKES, R., WEINANS, H., & RIETBERGEN, B. V. (1992) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-199201000-00014 · Cited by 1,213
Observations on the Effect of Movement on Bone Ingrowth into Porous-Surfaced Implants
PILLIAR, R. M., LEE, J. M., & MANIATOPOULOS, C. (1986) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-198607000-00023 · Cited by 1,182
Additive manufacturing of metallic components by selective electron beam melting — a review
Körner, C. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1176289 · Cited by 1,106
New Developments of Ti-Based Alloys for Biomedical Applications
Li, Y., Yang, C., Zhao, H., Qu, S., Li, X., & Li, Y. (2014) · Materials · doi:10.3390/ma7031709 · Cited by 1,048
Murr, L. E., Quinones, S. A., Gaytan, S. M., Lopez, M. I., Rodela, A., Martinez, E. Y., Hernandez, D. H., Martinez, E., Medina, F., & Wicker, R. B. (2009) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2008.05.004 · Cited by 997
Sing, S. L., An, J., Yeong, W. Y., & Wiria, F. E. (2016) · Journal of Orthopaedic Research · doi:10.1002/jor.23075 · Cited by 942
Al-Bermani, S. S., Blackmore, M., Zhang, W., & Todd, I. (2010) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-010-0397-x · Cited by 860
Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM)
Parthasarathy, J., Starly, B., Raman, S., & Christensen, A. (2010) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2009.10.006 · Cited by 816
Heinl, P., Müller, L., Körner, C., Singer, R. F., & Müller, F. A. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.03.013 · Cited by 815
Gokuldoss, P. K., Kolla, S., & Eckert, J. (2017) · Materials · doi:10.3390/ma10060672 · Cited by 804
Manufacture by selective laser melting and mechanical behavior of commercially pure titanium
Attar, H., Calin, M., Zhang, L. C., Scudino, S., & Eckert, J. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.11.038 · Cited by 744
Self-citationZhang, L., & Attar, H. (2016) · Advanced Engineering Materials · doi:10.1002/adem.201500419 · Cited by 721
Self-citationTan, X., Kok, Y., Tan, Y. J., Descoins, M., Mangelinck, D., Tor, S. B., Leong, K. F., & Chua, C. K. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.06.036 · Cited by 718
Zhao, X., Li, S., Zhang, M., Liu, Y., Sercombe, T. B., Wang, S., Hao, Y., Yang, R., & Murr, L. E. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.12.135 · Cited by 673
Self-citationLi, X. P., Wang, X. J., Saunders, M., Suvorova, A., Zhang, L. C., Liu, Y. J., Fang, M. H., Huang, Z. H., & Sercombe, T. B. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.05.017 · Cited by 654
Self-citationManufacture by selective laser melting and mechanical behavior of a biomedical Ti–24Nb–4Zr–8Sn alloy
Zhang, L., Klemm, D., Eckert, J., Hao, Y., & Sercombe, T. B. (2011) · Scripta Materialia · doi:10.1016/j.scriptamat.2011.03.024 · Cited by 597
Self-citationTammas-Williams, S., Zhao, H., Léonard, F., Derguti, F., Todd, I., & Prangnell, P. B. (2015) · Materials Characterization · doi:10.1016/j.matchar.2015.02.008 · Cited by 590
Attar, H., Bönisch, M., Calin, M., Zhang, L.-C., Scudino, S., & Eckert, J. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.05.022 · Cited by 585
Self-citationLiu, Y. J., Li, S. J., Wang, H. L., Hou, W. T., Hao, Y. L., Yang, R., Sercombe, T. B., & Zhang, L. C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.04.029 · Cited by 584
Self-citationCorrosion behavior of selective laser melted Ti-6Al-4 V alloy in NaCl solution
Dai, N., Zhang, L.-C., Zhang, J., Chen, Q., & Wu, M. (2016) · Corrosion Science · doi:10.1016/j.corsci.2015.10.041 · Cited by 570
Self-citationMurr, L. E., Esquivel, E. V., Quinones, S. A., Gaytan, S. M., Lopez, M. I., Martinez, E. Y., Medina, F., Hernandez, D. H., Martinez, E., Martinez, J. L., et al. (2009) · Materials Characterization · doi:10.1016/j.matchar.2008.07.006 · Cited by 564
Skowyra, J., Pietrzak, K., & Alhnan, M. A. (2015) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2014.11.009 · Cited by 530
Murr, L. E., Gaytan, S. M., Ceylan, A., Martinez, E., Martinez, J. L., Hernandez, D. H., Machado, B. I., Ramirez, D. A., Medina, F., Collins, S., et al. (2010) · Acta Materialia · doi:10.1016/j.actamat.2009.11.032 · Cited by 526
Biamino, S., Penna, A., Ackelid, U., Sabbadini, S., Tassa, O., Fino, P., Pavese, M., Gennaro, P., & Badini, C. (2011) · Intermetallics · doi:10.1016/j.intermet.2010.11.017 · Cited by 486
Selective laser sintering in biomedical engineering
Mazzoli, A. (2013) · Medical & Biological Engineering & Computing · doi:10.1007/s11517-012-1001-x · Cited by 469
Olakanmi, E. O. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.03.009 · Cited by 418
de Formanoir, C., Michotte, S., Rigo, O., Germain, L., & Godet, S. (2015) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.11.052 · Cited by 404
Fatigue performance of additive manufactured TiAl6V4 using electron and laser beam melting
Greitemeier, D., Palm, F., Syassen, F., & Melz, T. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.05.001 · Cited by 385
Defining the tensile properties of Al-12Si parts produced by selective laser melting
Prashanth, K. G., Scudino, S., & Eckert, J. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.044 · Cited by 382
Liu, Y. J., Wang, H. L., Li, S. J., Wang, S. G., Wang, W. J., Hou, W. T., Hao, Y. L., Yang, R., & Zhang, L. C. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.052 · Cited by 368
Self-citationLi, S. J., Xu, Q. S., Wang, Z., Hou, W. T., Hao, Y. L., Yang, R., & Murr, L. E. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.06.010 · Cited by 360
Self-citationRayegani, F., & Onwubolu, G. C. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-5835-2 · Cited by 358
Fatigue behavior of porous biomaterials manufactured using selective laser melting
Amin Yavari, S., Wauthle, R., van der Stok, J., Riemslag, A. C., Janssen, M., Mulier, M., Kruth, J. P., Schrooten, J., Weinans, H., & Zadpoor, A. A. (2013) · Materials Science and Engineering: C · doi:10.1016/j.msec.2013.08.006 · Cited by 357
Hrabe, N., Gnäupel-Herold, T., & Quinn, T. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.04.022 · Cited by 355
Gradient in microstructure and mechanical property of selective laser melted AlSi10Mg
Liu, Y., Liu, Z., Jiang, Y., Wang, G. W., Yang, Y., & Zhang, L. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.11.020 · Cited by 352
Self-citationDefect generation and propagation mechanism during additive manufacturing by selective beam melting
Bauereiß, A., Scharowsky, T., & Körner, C. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.05.002 · Cited by 351
Rafi, H. K., Starr, T. L., & Stucker, B. E. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-013-5106-7 · Cited by 335
Implementation of real-time multiple reflection and Fresnel absorption of laser beam in keyhole
Cho, J.-H., & Na, S.-J. (2006) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/39/24/039 · Cited by 332
Cheng, X. Y., Li, S. J., Murr, L. E., Zhang, Z. B., Hao, Y. L., Yang, R., Medina, F., & Wicker, R. B. (2012) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2012.10.005 · Cited by 329
Self-citationCompression fatigue behavior of Ti–6Al–4V mesh arrays fabricated by electron beam melting
Li, S. J., Murr, L. E., Cheng, X., Zhang, Z., Hao, Y., Yang, R., Medina, F. R., & Wicker, R. B. (2011) · Acta Materialia · doi:10.1016/j.actamat.2011.10.051 · Cited by 305
Self-citationFacchini, L., Magalini, E., Robotti, P., & Molinari, A. (2009) · Rapid Prototyping Journal · doi:10.1108/13552540910960262 · Cited by 290
The effect of atmosphere on the structure and properties of a selective laser melted Al–12Si alloy
Wang, X. J., Zhang, L., Fang, M., & Sercombe, T. B. (2014) · Materials Science and Engineering A · doi:10.1016/j.msea.2014.01.012 · Cited by 277
Self-citationKoike, M., Greer, P., Owen, K., Guo, L., Murr, L. E., Gaytan, S. M., Martinez, E., & Okabe, T. H. (2011) · Materials · doi:10.3390/ma4101776 · Cited by 270
Properties of Ti–6Al–4V non-stochastic lattice structures fabricated via electron beam melting
Cansizoglu, O., Harrysson, O. L. A., Cormier, D., West, H., & Mahale, T. (2008) · Materials Science and Engineering A · doi:10.1016/j.msea.2008.04.002 · Cited by 267
Biomedical titanium alloys and their additive manufacturing
Hao, Y., Li, S., & Yang, R. (2016) · Rare Metals · doi:10.1007/s12598-016-0793-5 · Cited by 267
Self-citationLaser printing of cells into 3D scaffolds
Ovsianikov, A., Gruene, M., Pflaum, M., Koch, L., Maiorana, F., Wilhelmi, M., Haverich, A., & Chichkov, B. (2010) · Biofabrication · doi:10.1088/1758-5082/2/1/014104 · Cited by 266
Zhao, S., Li, S. J., Hou, W. T., Hao, Y. L., Yang, R., & Misra, R. D. K. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2016.01.034 · Cited by 262
Self-citationMurr, L. E., Gaytan, S. M., Medina, F., Martinez, E., Martinez, J. L., Hernandez, D. H., Machado, B. I., Ramirez, D. A., & Wicker, R. B. (2010) · Materials Science and Engineering: A · doi:10.1016/j.msea.2009.11.015 · Cited by 258
Hrabe, N., & Quinn, T. (2013) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.02.064 · Cited by 252
Super-elastic titanium alloy with unstable plastic deformation
Hao, Y., Li, S. J., Sun, S. Y., Zheng, C., Hu, Q., & Yang, R. (2005) · Applied Physics Letters · doi:10.1063/1.2037192 · Cited by 237
Self-citationAdvanced metal powder based manufacturing of complex components by electron beam melting
Gaytan, S. M., Murr, L. E., Medina, F. R., Martinez, E., Lopez, M. I., & Wicker, R. B. (2009) · Materials Technology · doi:10.1179/106678509x12475882446133 · Cited by 235
Wang, D., Yang, Y., Liu, R., Xiao, D., & Sun, J. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.05.001 · Cited by 229
Juechter, V., Scharowsky, T., Singer, R. F., & Körner, C. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.05.037 · Cited by 227
Ramirez, D. A., Murr, L. E., Martinez, E., Hernandez, D. H., Martinez, J. L., Machado, B. I., Medina, F., Frigola, P., & Wicker, R. B. (2011) · Acta Materialia · doi:10.1016/j.actamat.2011.03.033 · Cited by 217
The rate of bone ingrowth into porous metal
Camron, H. U., Pilliar, R. M., & Macnab, I. (1976) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820100210 · Cited by 208
Corrosion Behaviour of Selective Laser Melted Ti-TiB Biocomposite in Simulated Body Fluid
Chen, Y., Zhang, J., Dai, N., Qin, P., Attar, H., & Zhang, L.-C. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.02.112 · Cited by 207
Self-citationJia, Z., Duan, X., Qin, P., Zhang, W., Wang, W., Yang, C., Sun, H., Wang, S., & Zhang, L. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201702258 · Cited by 201
Self-citationEvaluation of titanium alloy fabricated using electron beam melting system for dental applications
Koike, M., Martinez, K., Guo, L., Chahine, G., Kovacevic, R., & Okabe, T. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2011.03.013 · Cited by 182
Tan, X., Kok, Y., Toh, W. Q., Tan, Y. J., Descoins, M., Mangelinck, D., Tor, S. B., Leong, K. F., & Chua, C. K. (2016) · Scientific Reports · doi:10.1038/srep26039 · Cited by 182
High specific strength and stiffness structures produced using selective laser melting
Challis, V. J., Xu, X., Zhang, L., Roberts, A. P., Grotowski, J. F., & Sercombe, T. B. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.05.064 · Cited by 169
Self-citationMačiulaitis, J., Deveikytė, M., Rekštytė, S., Bratchikov, M., Darinskas, A., Šimbelytė, A., Daunoras, G., Laurinavičienė, A., Laurinavičius, A., Gudas, R., et al. (2015) · Biofabrication · doi:10.1088/1758-5090/7/1/015015 · Cited by 164
Hernández-Nava, E., Smith, C. J., Derguti, F., Tammas‐Williams, S., Léonard, F., Withers, P. J., Todd, I., & Goodall, R. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.029 · Cited by 146
Heat transfer and fluid flow during electron beam welding of 21Cr–6Ni–9Mn steel and Ti–6Al–4V alloy
Rai, R., Burgardt, P., Milewski, J. O., et al. (2008) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/42/2/025503 · Cited by 143
Attar, H., Bönisch, M., Calin, M., Zhang, L., Zhuravleva, K., Funk, A., Scudino, S., Yang, C. Q., & Eckert, J. (2014) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2014.122 · Cited by 139
Self-citationChallis, V. J., Roberts, A. P., Grotowski, J. F., Zhang, L., & Sercombe, T. B. (2010) · Advanced Engineering Materials · doi:10.1002/adem.201000154 · Cited by 134
Self-citationHyaluronic Acid Based Materials for Scaffolding via Two-Photon Polymerization
Kufelt, O., El-Tamer, A., Sehring, C., Schlie-Wolter, S., & Chichkov, B. N. (2014) · Biomacromolecules · doi:10.1021/bm401712q · Cited by 130
Malinauskas, M., Rekštytė, S., Lukoševičius, L., Butkus, S., Balčiūnas, E., Pečiukaitytė, M., Baltriukienė, D., Bukelskienė, V., Butkevičius, A., Kucevičius, P., et al. (2014) · Micromachines · doi:10.3390/mi5040839 · Cited by 127
Liu, X., Shen, Y., Yang, R., Zou, S., Ji, X., Shi, L., Zhang, Y., Liu, D., Xiao, L., Zheng, X., et al. (2012) · Nano Letters · doi:10.1021/nl302992q · Cited by 118
Galarraga, H., Warren, R. J., Lados, D. A., Dehoff, R., & Kirka, M. M. (2017) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2017.03.024 · Cited by 107
Liu, L. H., Yang, C. Q., Wang, F., Qu, S., Li, X., Zhang, W., Li, Y., & Zhang, L. (2015) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2015.04.032 · Cited by 99
Self-citationHigh-strength silicon brass manufactured by selective laser melting
Yang, C. Q., Zhao, Y., Kang, L. M., Li, D. D., Zhang, W. W., & Zhang, L. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.09.011 · Cited by 88
Self-citationScharowsky, T., Juechter, V., Singer, R. F., & Körner, C. (2015) · Advanced Engineering Materials · doi:10.1002/adem.201400542 · Cited by 76
Wang, L., Qu, J., Chen, L., Meng, Q., Zhang, L., Qin, J., Zhang, D., & Lü, W. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-3089-8 · Cited by 56
Self-citationÖzbilen, S., Liebert, D., Beck, T., & Bram, M. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.11.050 · Cited by 46
Gong, H. (2013) · ThinkIR: The University of Louisville's Institutional Repository (University of Louisville) · doi:10.18297/etd/515 · Cited by 45
Sie, Y. D., Li, Y.-C., Chang, N., et al. (2015) · Biomedical Optics Express · doi:10.1364/boe.6.000480 · Cited by 34
Cited by
A Review on Biomedical Titanium Alloys: Recent Progress and Prospect
Zhang, L., & Chen, L. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201801215 · Cited by 1,100
Self-citationState of the Art in Directed Energy Deposition: From Additive Manufacturing to Materials Design
Dass, A., & Moridi, A. (2019) · Coatings · doi:10.3390/coatings9070418 · Cited by 667
Nguyen, H. D., Pramanik, A., Basak, A. K., Dong, Y., Prakash, C., Debnath, S., Shankar, S., Jawahir, I. S., Dixit, S., & Buddhi, D. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.04.055 · Cited by 634
Chen, L.-Y., Liang, S.-X., Liu, Y., & Zhang, L.-C. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100648 · Cited by 603
Self-citationMostafaei, A., Ghiaasiaan, R., Ho, I.-T., Strayer, S., Chang, K.-C., Shamsaei, N., Shao, S., Paul, S., Yeh, A.-C., Tin, S., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101108 · Cited by 531
Metadata
- Authors
- Zhang, L., Liu, Y., Li, S., & Hao, Y.
- Venue
- Advanced Engineering Materials
- Publisher
- Wiley
- Published
- 2017-12-19
- Volume
- 20
- Issue
- 5
- ISSN
- 1438-1656 (ISSN-L)
- 1527-2648
- OpenAlex
- W2777689514
- Cited by
- 486
- References
- 86
- FWCI
- 28.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.