The DOI matches its Crossref record; 53 of the 53 references it cites were found in a registry or an index.
Synthesis and Rate Performance of Monolithic Macroporous Carbon Electrodes for Lithium‐Ion Secondary Batteries
Open accessAbstract
Three‐dimensionally ordered macroporous (3DOM) materials are composed of well‐interconnected pore and wall structures with wall thicknesses of a few tens of nanometers. These characteristics can be applied to enhance the rate performance of lithium‐ion secondary batteries. 3DOM monoliths of hard carbon have been synthesized via a resorcinol‐formaldehyde sol–gel process using poly(methyl methacrylate) colloidal‐crystal templates, and the rate performance of 3DOM carbon electrodes for lithium‐ion secondary batteries has been evaluated. The advantages of monolithic 3DOM carbon electrodes are: 1) solid‐state diffusion lengths for lithium ions of the order of a few tens of nanometers, 2) a large number of active sites for charge‐transfer reactions because of the material's high surface area, 3) reasonable electrical conductivity of 3DOM carbon due to a well‐interconnected wall structure, 4) high ionic conductivity of the electrolyte within the 3DOM carbon matrix, and 5) no need for a binder and/or a conducting agent. These factors lead to significantly improved rate performance compared to a similar but non‐templated carbon electrode and compared to an electrode prepared from spherical carbon with binder. To increase the energy density of 3DOM carbon, tin oxide nanoparticles have been coated on the surface of 3DOM carbon by thermal decomposition of tin sulfate, because the specific capacity of tin oxide is larger than that of carbon. The initial specific capacity of SnO 2‐coated 3DOM carbon increases compared to that of 3DOM carbon, resulting in a higher energy density of the modified 3DOM carbon. However, the specific capacity decreases as cycling proceeds, apparently because lithium–tin alloy nanoparticles were detached from the carbon support by volume changes during charge–discharge processes. The rate performance of SnO 2‐coated 3DOM carbon is improved compared to 3DOM carbon.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrochemical Methods: Fundamentals and Applications
Bard, A. J., & Faulkner, L. R. (1980) · Cited by 22,822
Tuinstra, F., & Koenig, J. L. (1970) · The Journal of Chemical Physics · doi:10.1063/1.1674108 · Cited by 10,717
Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteries
Poizot, P., Laruelle, S., Grugeon, S., Dupont, L., & Tarascon, J.-M. (2000) · Nature · doi:10.1038/35035045 · Cited by 8,041
Insertion Electrode Materials for Rechargeable Lithium Batteries
Winter, M., Besenhard, J. O., Spahr, M. E., & Novák, P. (1998) · Advanced Materials · doi:10.1002/(sici)1521-4095(199807)10:10<725::aid-adma725>3.0.co;2-z · Cited by 2,965
Tin-Based Amorphous Oxide: A High-Capacity Lithium-Ion-Storage Material
Idota, Y., Kubota, T., Matsufuji, A., Maekawa, Y., & Miyasaka, T. (1997) · Science · doi:10.1126/science.276.5317.1395 · Cited by 2,578
Synthesis of Highly Ordered Carbon Molecular Sieves via Template-Mediated Structural Transformation
Ryoo, R., Joo, S. H., & Jun, S. (1999) · The Journal of Physical Chemistry B · doi:10.1021/jp991673a · Cited by 2,450
Mechanisms for Lithium Insertion in Carbonaceous Materials
Dahn, J. R., Zheng, T., Liu, Y., & Xue, J. S. (1995) · Science · doi:10.1126/science.270.5236.590 · Cited by 2,123
Organic aerogels from the polycondensation of resorcinol with formaldehyde
Pekala, R. W. (1989) · Journal of Materials Science · doi:10.1007/bf01139044 · Cited by 1,811
Raman spectroscopy of carbon materials: structural basis of observed spectra
Wang, Y., Alsmeyer, D. C., & McCreery, R. L. (1990) · Chemistry of Materials · doi:10.1021/cm00011a018 · Cited by 1,727
Raman spectroscopy on amorphous carbon films
Schwan, J., Ulrich, S., Batori, V., Ehrhardt, H., & Silva, S. R. P. (1996) · Journal of Applied Physics · doi:10.1063/1.362745 · Cited by 1,381
Cited by
Advanced Materials for Energy Storage
Liu, C., Li, F., Ma, L., & Cheng, H. (2010) · Advanced Materials · doi:10.1002/adma.200903328 · Cited by 4,765
Recent developments in nanostructured anode materials for rechargeable lithium-ion batteries
Ji, L., Lin, Z., Alcoutlabi, M., & Zhang, X. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00699h · Cited by 2,240
Qie, L., Chen, W., Wang, Z., Shao, Q., Li, X., Yuan, L., Hu, X., Zhang, W., & Huang, Y. (2012) · Advanced Materials · doi:10.1002/adma.201104634 · Cited by 1,656
Hierarchically porous materials: synthesis strategies and structure design
Yang, X.-Y., Chen, L.-H., Li, Y., Rooke, J. C., Sanchez, C., & Su, B.-L. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00829a · Cited by 1,439
Meng, Y., Gu, D., Zhang, F., Shi, Y., Cheng, L., Feng, D., Wu, Z., Chen, Z., Wan, Y., Stein, A., et al. (2006) · Chemistry of Materials · doi:10.1021/cm060921u · Cited by 1,097
Self-citationTemplated synthesis of nanostructured materials
Liu, Y., Goebl, J., & Yin, Y. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35369e · Cited by 971
Hierarchically Structured Porous Materials for Energy Conversion and Storage
Li, Y., Fu, Z., & Su, B. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200591 · Cited by 951
High-Density Sodium and Lithium Ion Battery Anodes from Banana Peels
Lotfabad, E. M., Ding, J., Cui, K., Kohandehghan, A., Kalisvaart, W. P., Hazelton, M., & Mitlin, D. (2014) · ACS Nano · doi:10.1021/nn502045y · Cited by 907
Functionalization of Porous Carbon Materials with Designed Pore Architecture
Stein, A., Wang, Z., & Fierke, M. A. (2009) · Advanced Materials · doi:10.1002/adma.200801492 · Cited by 895
Self-citationMultifunctional 3D nanoarchitectures for energy storage and conversion
Rolison, D. R., Long, J. W., Lytle, J. C., Fischer, A. E., Rhodes, C. P., McEvoy, T. M., Bourg, M. E., & Lubers, A. M. (2009) · Chem. Soc. Rev. · doi:10.1039/b801151f · Cited by 812
Self-citationTemplated nanocarbons for energy storage
Nishihara, H., & Kyotani, T. (2012) · Advanced Materials · doi:10.1002/adma.201201715 · Cited by 745
Porous electrode materials for lithium-ion batteries–how to prepare them and what makes them special
Vu, A., Qian, Y., & Stein, A. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200320 · Cited by 719
Self-citationHu, Y. ‐., Adelhelm, P., Smarsly, B. M., Hore, S., Antonietti, M., & Maier, J. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200601152 · Cited by 707
Nanostructured Carbon and Carbon Nanocomposites for Electrochemical Energy Storage Applications
Su, D. S., & Schlögl, R. (2010) · ChemSusChem · doi:10.1002/cssc.200900182 · Cited by 671
Advanced carbon aerogels for energy applications
Biener, J., Stadermann, M., Suss, M., Worsley, M. A., Biener, M. M., Rose, K. A., & Baumann, T. F. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00627k · Cited by 651
Direct synthesis of ordered mesoporous carbons
Ma, T.-Y., Liu, L., & Yuan, Z.-Y. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35301f · Cited by 598
Zhao, Y., Wang, L. P., Sougrati, M. T., Feng, Z., Leconte, Y., Fisher, A., Srinivasan, M., & Xu, Z. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601424 · Cited by 586
Stein, A., Wilson, B. E., & Rudisill, S. G. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35317b · Cited by 551
Self-citationSurface and Interface Engineering of Electrode Materials for Lithium‐Ion Batteries
Wang, K., Li, X., & Chen, J. (2015) · Advanced Materials · doi:10.1002/adma.201402962 · Cited by 546
Template-Directed Materials for Rechargeable Lithium-Ion Batteries
Cheng, F., Tao, Z., Liang, J., & Chen, J. (2008) · Chemistry of Materials · doi:10.1021/cm702091q · Cited by 537
Wang, Y., Zeng, H. C., & Lee, J. Y. (2006) · Advanced Materials · doi:10.1002/adma.200501883 · Cited by 493
Yang, S., Feng, X., Zhi, L., Cao, Q., Maier, J., & Müllen, K. (2010) · Advanced Materials · doi:10.1002/adma.200902795 · Cited by 489
Stein, A., Li, F., & Denny, N. R. (2008) · Chemistry of Materials · doi:10.1021/cm702107n · Cited by 487
Self-citationHeterogeneous nanostructured electrode materials for electrochemical energy storage
Liu, R., Duay, J., & Lee, S. B. (2011) · Chem. Commun. · doi:10.1039/c0cc03158e · Cited by 486
Wen, Z., Wang, Q., Zhang, Q., & Li, J. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200600739 · Cited by 484
Colloidal Self-Assembly Approaches to Smart Nanostructured Materials
Li, Z., Fan, Q., & Yin, Y. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00482 · Cited by 468
Recent advances in metal nitrides as high-performance electrode materials for energy storage devices
Balogun, M.-S., Qiu, W., Wang, W., Fang, P., Lu, X., & Tong, Y. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05565a · Cited by 467
Demir-Cakan, R., Hu, Y.-S., Antonietti, M., Maier, J., & Titirici, M.-M. (2008) · Chemistry of Materials · doi:10.1021/cm7031288 · Cited by 432
Carbon foam: Preparation and application
Inagaki, M., Qiu, J., & Guo, Q. (2015) · Carbon · doi:10.1016/j.carbon.2015.02.021 · Cited by 429
Wang, D., Li, F., Yin, L., Lu, X., Chen, Z., Gentle, I. R., Lu, G. Q. (., & Cheng, H. (2012) · Chemistry – A European Journal · doi:10.1002/chem.201102806 · Cited by 394
Wang, Y., Su, F., Lee, J. Y., & Zhao, X. S. (2006) · Chemistry of Materials · doi:10.1021/cm052219o · Cited by 387
Lee, J. S., Wang, X., Luo, H., & Dai, S. (2010) · Advanced Materials · doi:10.1002/adma.200903403 · Cited by 359
Porous Carbon Composites for Next Generation Rechargeable Lithium Batteries
Liu, H., Liu, X., Li, W., Guo, X., Wang, Y., Wang, G., & Zhao, D. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700283 · Cited by 356
Armstrong, E., & O'Dwyer, C. (2015) · Journal of Materials Chemistry C · doi:10.1039/c5tc01083g · Cited by 342
Ou, J., Zhang, Y., Chen, L., Zhao, Q., Meng, Y., Guo, Y., & Xiao, D. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06614f · Cited by 340
Deng, X., Zhao, B., Zhu, L., & Shao, Z. (2015) · Carbon · doi:10.1016/j.carbon.2015.05.031 · Cited by 339
Porous carbon-supported catalysts for energy and environmental applications: A short review
Yang, Y., Chiang, K., & Burke, N. (2011) · Catalysis Today · doi:10.1016/j.cattod.2011.08.028 · Cited by 325
Yang, S., Song, H., & Chen, X. (2006) · Electrochemistry Communications · doi:10.1016/j.elecom.2005.10.035 · Cited by 298
Silicon Inverse‐Opal‐Based Macroporous Materials as Negative Electrodes for Lithium Ion Batteries
Esmanski, A., & Ozin, G. A. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200900306 · Cited by 269
Ideal Three‐Dimensional Electrode Structures for Electrochemical Energy Storage
Chabi, S., Peng, C., Hu, D., & Zhu, Y. (2014) · Advanced Materials · doi:10.1002/adma.201305095 · Cited by 253
Carbon Aerogels and Monoliths: Control of Porosity and Nanoarchitecture via Sol–Gel routes
Antonietti, M., Fechler, N., & Fellinger, T.-P. (2014) · Chemistry of Materials · doi:10.1021/cm402239e · Cited by 227
Cui, J., Xi, Y., Chen, S., Li, D., She, X., Sun, J., Han, W., Yang, D., & Guo, S. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201603933 · Cited by 200
Liu, L., Yang, X., Lv, C., Zhu, A., Zhu, X., Guo, S., Chen, C., & Yang, D. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b12427 · Cited by 192
Metadata
- Authors
- Lee, K. T., Lytle, J. C., Ergang, N. S., Oh, S. M., & Stein, A.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2005-03-23
- Volume
- 15
- Issue
- 4
- Pages
- 547-556
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2171236786
- Cited by
- 467
- References
- 53
- FWCI
- 19.39
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.