Direct Ink Writing of 3D Functional Materials
The DOI matches its Crossref record; 81 of the 82 references it cites were found in a registry or an index, and 1 are not checked yet.
Abstract
The ability to pattern materials in three dimensions is critical for several technological applications, including composites, microfluidics, photonics, and tissue engineering. Direct‐write assembly allows one to design and rapidly fabricate materials in complex 3D shapes without the need for expensive tooling, dies, or lithographic masks. Here, recent advances in direct ink writing are reviewed with an emphasis on the push towards finer feature sizes. Opportunities and challenges associated with direct ink writing are also highlighted.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Inhibited Spontaneous Emission in Solid-State Physics and Electronics
Yablonovitch, E. (1987) · Physical Review Letters · doi:10.1103/physrevlett.58.2059 · Cited by 14,067
Fuzzy Nanoassemblies: Toward Layered Polymeric Multicomposites
Decher, G. (1997) · Science · doi:10.1126/science.277.5330.1232 · Cited by 10,054
Strong localization of photons in certain disordered dielectric superlattices
John, S. (1987) · Physical Review Letters · doi:10.1103/physrevlett.58.2486 · Cited by 10,029
Geometric Control of Cell Life and Death
Chen, C. S., Mrksich, M., Huang, S., Whitesides, G. M., & Ingber, D. E. (1997) · Science · doi:10.1126/science.276.5317.1425 · Cited by 4,657
Autonomic healing of polymer composites
White, S. R., Sottos, N. R., Geubelle, P. H., Moore, J. S., Kessler, M. R., Sriram, S. R., Brown, E. N., & Viswanathan, S. (2001) · Nature · doi:10.1038/35057232 · Cited by 4,575
Photonic crystals: putting a new twist on light
Joannopoulos, J. D., Villeneuve, P. R., & Fan, S. (1997) · Nature · doi:10.1038/386143a0 · Cited by 3,137
Tissue Engineering--Current Challenges and Expanding Opportunities
Griffith, L. G., & Naughton, G. (2002) · Science · doi:10.1126/science.1069210 · Cited by 2,343
Two-photon polymerization initiators for three-dimensional optical data storage and microfabrication
Cumpston, B. H., Ananthavel, S. P., Barlow, S., Dyer, D. L., Ehrlich, J. E., Erskine, L. L., Heikal, A. A., Kuebler, S. M., Lee, I.-Y. S., McCord-Maughon, D., et al. (1999) · Nature · doi:10.1038/17989 · Cited by 2,232
Functional hydrogel structures for autonomous flow control inside microfluidic channels
Beebe, D. J., Moore, J. S., Bauer, J. M., Yu, Q., Liu, R. H., Devadoss, C., & Jo, B.-H. (2000) · Nature · doi:10.1038/35007047 · Cited by 1,971
Fabrication of photonic crystals for the visible spectrum by holographic lithography
Campbell, M., Sharp, D. N., Harrison, M. T., Denning, R. G., & Turberfield, A. J. (2000) · Nature · doi:10.1038/35003523 · Cited by 1,675
Research works printed but not linked: 5
- Cesarano J., 1998, Ceram. Ind., 184, 94
- G. He D. A. Hirschfeld J. C. Cesarano III. inProc. of 24th Int. Conf. & Exposition on Engineering Ceramics and Structures The American Ceramic Society Westerville OH2000 Paper No. C‐071‐00.
- J.‐W. Choi C. H. Ahn inProc. of Microfluidic Devices and Systems III Santa Clara CA USA 4177 154 2000. SPIE. · doi:10.1117/12.395652
- S. W. Jones inChaos Applied to Fluid Mixing(Eds: H. Aref M. S. El Naschie) Pergamon Oxford UK1995 p. 185.
- Cha J. N., 2000, Nature, 403, 403
Cited by
Items 301–400 of 1,000
Complex‐Shaped Cellulose Composites Made by Wet Densification of 3D Printed Scaffolds
Hausmann, M. K., Siqueira, G. D. F., Libanori, R., Kokkinis, D., Neels, A., Zimmermann, T., & Studart, A. R. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201904127 · Cited by 111
Sweeney, M., Campbell, L. L., Hanson, J. M., Pantoya, M. L., & Christopher, G. F. (2017) · Journal of Materials Science · doi:10.1007/s10853-017-1404-z · Cited by 110
“[8] Lewis JA (2006) Direct ink writing of 3D functional mate-”
BackgroundDirect Ink Writing of Polymer Composite Electrolytes with Enhanced Thermal Conductivities
Cheng, M., Ramasubramanian, A., Rasul, M. G., Jiang, Y., Yuan, Y., Foroozan, T., Deivanayagam, R., Saray, M. T., Rojaee, R., Song, B., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202006683 · Cited by 110
Fast Setting Silk Fibroin Bioink for Bioprinting of Patient‐Specific Memory‐Shape Implants
Costa, J. B., Silva‐Correia, J., Oliveira, J. M., & Reis, R. L. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201701021 · Cited by 105
3D printed cellular solid outperforms traditional stochastic foam in long-term mechanical response
Maiti, A., Small, W., Lewicki, J. P., Weisgraber, T. H., Duoss, E. B., Chinn, S. C., Pearson, M. A., Spadaccini, C., Maxwell, R. S., & Wilson, T. S. (2016) · Scientific Reports · doi:10.1038/srep24871 · Cited by 109
3D printed Ni/Al2O3 based catalysts for CO2 methanation - a comparative and operando XRD-CT study
Middelkoop, V., Vamvakeros, A., de Wit, D., Jacques, S. D. M., Danaci, S., Jacquot, C., Vos, Y. D., Matras, D., Price, S. W. T., & Beale, A. M. (2019) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2019.07.013 · Cited by 109
3D printed cellulose nanocrystal composites through digital light processing
Li, V. C.-F., Kuang, X., Mulyadi, A., Hamel, C. M., Deng, Y., & Qi, H. J. (2019) · Cellulose · doi:10.1007/s10570-019-02353-9 · Cited by 109
“Palaganas et al. successfully printed CNC 3D composite structures via SLA.”
MethodInfluentialUnconventional-Phase Crystalline Materials Constructed from Multiscale Building Blocks
Liu, J., Huang, J., Niu, W., Tan, C., & Zhang, H. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01047 · Cited by 108
Addressing Unmet Clinical Needs with 3D Printing Technologies
Ghosh, U., Ning, S., Wang, Y., & Kong, Y. L. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201800417 · Cited by 107
A review on the current research on graphene-based aerogels and their applications
Nassar, G., Daou, E., Najjar, R., Bassil, M. J., & Habchi, R. (2021) · Carbon Trends · doi:10.1016/j.cartre.2021.100065 · Cited by 107
Jiang, T., Munguia-Lopez, J. G., Gu, K., Bavoux, M. M., Flores-Torres, S., Kort-Mascort, J., Grant, J., Vijayakumar, S., De Leon-Rodriguez, A., Ehrlicher, A. J., et al. (2020) · Biofabrication · doi:10.1088/1758-5090/ab3a5c · Cited by 106
Nanomaterials-patterned flexible electrodes for wearable health monitoring: a review
Hasan, M. M., & Hossain, M. M. (2021) · Journal of Materials Science · doi:10.1007/s10853-021-06248-8 · Cited by 106
“[233] Lewis JA (2006) Direct ink writing of 3D functional materials.”
BackgroundAnisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer
Sol, J. A. H. P., Sentjens, H., Yang, L., Grossiord, N., Schenning, A. P. H. J., & Debije, M. G. (2021) · Advanced Materials · doi:10.1002/adma.202103309 · Cited by 106
Xia, Y., Lu, Z., Cao, J., Miao, K., Li, J., & Li, D. (2019) · Scripta Materialia · doi:10.1016/j.scriptamat.2019.02.016 · Cited by 105
4D printed shape-shifting biomaterials for tissue engineering and regenerative medicine applications
Kalogeropoulou, M., Díaz‐Payno, P. J., Mirzaali, M. J., van Osch, G. J. V. M., Fratila-Apachitei, L. E., & ZADPOOR, A. A. (2024) · Biofabrication · doi:10.1088/1758-5090/ad1e6f · Cited by 106
“DIW is a printing technique that utilizes liquid or paste-like materials as inks, which exhibit viscoelastic behaviour in heat-free environments [44, 45].”
Zheng, R., Chen, Y., Chi, H., Qiu, H., Xue, H., & Bai, H. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c18201 · Cited by 104
Nature-inspired materials and structures using 3D Printing
Bandyopadhyay, A. K., Traxel, K. D., & Bose, S. (2021) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2021.100609 · Cited by 107
Qian, X., Ostwal, M., Asatekin, A., Geise, G. M., Smith, Z. P., Phillip, W. A., Lively, R. P., & McCutcheon, J. R. (2021) · Journal of Membrane Science · doi:10.1016/j.memsci.2021.120041 · Cited by 104
Textile electronics for wearable applications
Pu, J., Ma, K., Luo, Y., Tang, S., Liu, T., Liu, J., Leung, M., Yang, J., Hui, R., Xiong, Y., et al. (2023) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ace66a · Cited by 104
Zhang, Y., Yin, X., Zheng, M., Moorlag, C., Yang, J., & Wang, Z. L. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta12428k · Cited by 104
Overview on the applications of three-dimensional printing for rechargeable lithium-ion batteries
Yang, Y., Yuan, W., Zhang, X., Yuan, Y., Wang, C., Ye, Y., Huang, Y., Qiu, Z., & Tang, Y. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.114002 · Cited by 103
Microfluidics: Recent Advances Toward Lab‐on‐Chip Applications in Bioanalysis
Sharma, B., & Sharma, A. (2021) · Advanced Engineering Materials · doi:10.1002/adem.202100738 · Cited by 103
Li, J., Wang, L., He, X., Liang, J., & Dong, C. (2025) · npj Advanced Manufacturing · doi:10.1038/s44334-025-00057-6 · Cited by 103
“…, fused deposition modeling (FDM) 65,66 , and laminated object manufacturing (LOM) 67,68 , direct ink writing (DIW) 69 – 71 , binder jetting 72,73 , joule print 74,75 , liquid metal additive manufacturing 76 – 78 , electrochemical additive manufacturing (ECAM) 79 – 81 , and cold spray…”
Lu, Z., Xia, Y., Miao, K., Li, S., Zhu, L., Nan, H., Cao, J., & Li, D. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.05.283 · Cited by 102
Thermal energy regulation with 3D printed polymer-phase change material composites
Wei, P., Cipriani, C. E., & Pentzer, E. (2021) · Matter · doi:10.1016/j.matt.2021.03.019 · Cited by 102
Azuaje, J., Tubio, C. R., Escalante, L., Gómez, M., Guitián, F., Coelho, A., Caamaño, O., Gil, Á., & Sotelo, E. (2016) · Applied Catalysis A General · doi:10.1016/j.apcata.2016.11.031 · Cited by 101
Nguyen, T. N. H., Nolan, J. K., Park, H., Lam, S., Fattah, M., Page, J. C., Joe, H.-E., Jun, M. B. G., Lee, H., Kim, S. J., et al. (2019) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2019.01.051 · Cited by 95
Direct ink writing of hierarchical porous alumina‐stabilized emulsions: Rheology and printability
Chan, S. S. L., Sesso, M. L., & Franks, G. V. (2020) · Journal of the American Ceramic Society · doi:10.1111/jace.17305 · Cited by 101
“In DIW, or material extrusion, it is recognized that a well-controlled shearthinning viscoelastic response is essential for the feedstock to flow through the print nozzle when a stress is applied, then promptly retain its filament shape after deposition (18).”
BackgroundMarques, A., Miranda, G., Silva, F. S., Pinto, P., & Carvalho, Ó. S. N. (2020) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.34706 · Cited by 101
3D printing for rechargeable lithium metal batteries
Zhou, S., Usman, I., Wang, Y., & Pan, A. (2021) · Energy storage materials · doi:10.1016/j.ensm.2021.02.041 · Cited by 101
Advances in 3D printing of magnetic materials: Fabrication, properties, and their applications
Wei, X., Jin, M., Yang, H., Wang, X., Long, Y., & Chen, Z. (2022) · Journal of Advanced Ceramics · doi:10.1007/s40145-022-0567-5 · Cited by 101
Chen, K., Zhang, M., Bhandari, B., & Deng, D. (2024) · Food Chemistry · doi:10.1016/j.foodchem.2024.139176 · Cited by 101
Multimaterial Multinozzle Adaptive 3D Printing of Soft Materials
Uzel, S. G. M., Weeks, R. D., Eriksson, M., Kokkinis, D., & Lewis, J. A. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202101710 · Cited by 100
Self-citationKozin, E. D., Black, N. L., Cheng, J. T., Cotler, M. J., McKenna, M. J., Lee, D. J., Lewis, J. A., Rosowski, J. J., & Remenschneider, A. K. (2016) · Hearing Research · doi:10.1016/j.heares.2016.03.005 · Cited by 100
“Of specific relevance is direct ink writing (DIW), an extrusion-based printing 145 method that enables a broad range of viscoelastic materials to be patterned under 146 ambient conditions (Barry et al., 2009; Gratson et al., 2004; Hanson Shepherd et al., 147 2011; Lewis, 2006).”
BackgroundMethodSelf-citationMu, X., Fitzpatrick, V., & Kaplan, D. L. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901552 · Cited by 92
Fluid-driven artificial muscles: bio-design, manufacturing, sensing, control, and applications
Zhang, C., Zhu, P., Lin, Y., Tang, W., Jiao, Z., Yang, H., & Zou, J. T. (2020) · Bio-Design and Manufacturing · doi:10.1007/s42242-020-00099-z · Cited by 99
Coffigniez, M., Grémillard, L., Balvay, S., Lachambre, J., Adrien, J., & Boulnat, X. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.101859 · Cited by 99
Ni-Mn-Ga micro-trusses via sintering of 3D-printed inks containing elemental powders
Taylor, S. L., Shah, R. N., & Dunand, D. C. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.10.002 · Cited by 99
Pei, M., Shi, H., Yao, F., Liang, S., Xu, Z., Pei, X., Wang, S., & Hu, Y. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta06683h · Cited by 98
Recent advances in the 3D printing of electrically conductive hydrogels for flexible electronics
Yang, R., Chen, X., Zheng, Y., Chen, K., Zeng, W., & Wu, X. (2022) · Journal of Materials Chemistry C · doi:10.1039/d1tc06162c · Cited by 98
Dong, X., Luo, X., Zhao, H., Qiao, C., Li, J., Yi, J., Yang, L., Oropeza, F. J., Hu, T. S., Xu, Q., et al. (2022) · Soft Matter · doi:10.1039/d2sm01067d · Cited by 99
Revolutionising textile manufacturing: a comprehensive review on 3D and 4D printing technologies
Manaia, J. P., Cerejo, F., & Duarte, J. (2023) · Fashion and Textiles · doi:10.1186/s40691-023-00339-7 · Cited by 98
“Layer by layer, 3D objects are built, through filament solidification due to rheological transition from pseudoplastic to dilatant state or due to paste gelation (Chatterjee & Ghosh, 2020; Lewis, 2006; Xu et al., 2021b).”
Background3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure
Sather, N. A., Sai, H., Sasselli, I. R., Sato, K., Ji, W., Synatschke, C. V., Zambrotta, R. T., Edelbrock, J. F., Kohlmeyer, R. R., Hardin, J. O., et al. (2021) · Small · doi:10.1002/smll.202005743 · Cited by 97
3D Printing‐Enabled Design and Manufacturing Strategies for Batteries: A Review
Fonseca, N., Thummalapalli, S. V., Jambhulkar, S., Ravichandran, D., Zhu, Y., Patil, D., Thippanna, V., Ramanathan, A., Xu, W., Guo, S., et al. (2023) · Small · doi:10.1002/smll.202302718 · Cited by 97
The Role of 3D Printing Technologies in Soft Grippers
Xin, Y., Zhou, X., Bark, H., & Lee, P. S. (2023) · Advanced Materials · doi:10.1002/adma.202307963 · Cited by 99
A 3D printable tissue adhesive
Wu, S. J., Wu, J., Kaser, S. J., Roh, H., Shiferaw, R. D., Yuk, H., & Zhao, X. (2024) · Nature Communications · doi:10.1038/s41467-024-45147-9 · Cited by 99
Zhou, L., Ning, W.-W., Wu, C., Zhang, D., Wei, W. F., Ma, J., Li, C. C., & Chen, L. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201800402 · Cited by 97
The preparation of SiC ceramic photosensitive slurry for rapid stereolithography
Tang, J., Guo, X., Chang, H., Hu, K., Shen, Z., Wang, W., Liu, M., Wei, Y., Huang, Z., & Yang, Y. P. (2021) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2021.08.029 · Cited by 96
“Among them, the printing precision of DIW technology is poor due to the mutual restriction of nozzle diameter and viscosity [17,18].”
3D printing of high performance cyanate ester thermoset polymers
Chandrasekaran, S., Duoss, E. B., Worsley, M. A., & Lewicki, J. P. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta09466c · Cited by 96
3D Printing for the Clinic: Examining Contemporary Polymeric Biomaterials and Their Clinical Utility
Weems, A. C., Pérez-Madrigal, M. M., Arno, M. C., & Dove, A. P. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.9b01539 · Cited by 87
“Ideally, DIW materials are able to maintain their shape provided that no external shear is applied; only during the extrusion process itself is the material able to flow.(11) The major”
BackgroundLinking thermoset ink rheology to the stability of 3D-printed structures
Romberg, S. K., Islam, M. A., Hershey, C. J., DeVinney, M., Duty, C., Kunc, V., & Compton, B. G. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101621 · Cited by 95
Porous monoliths of 3D graphene for electric double‐layer supercapacitors
Zeng, J., Xu, C., Gao, T., Jiang, X., & Wang, X. (2021) · Carbon Energy · doi:10.1002/cey2.107 · Cited by 95
“3D printing, that is, additive manufacturing, employs computer‐controlled pattern generation to create an architectural structure.(70) It is based on the continuous extrusion of ink, whose extrudate maintains its shape and adheres to the previous extrudate layer.”
BackgroundSustainable Robots 4D Printing
Soleimanzadeh, H., Rolfe, B., Bodaghi, M., Jamalabadi, M., Zhang, X., & Zolfagharian, A. (2023) · Advanced Sustainable Systems · doi:10.1002/adsu.202300289 · Cited by 95
Using “Click‐e‐Bricks” to Make 3D Elastomeric Structures
Morin, S. A., Shevchenko, Y. Y., Lessing, J., Kwok, S. W., Shepherd, R. F., Stokes, A. A., & Whitesides, G. M. (2014) · Advanced Materials · doi:10.1002/adma.201401642 · Cited by 95
Printed Nanocomposite Energy Harvesters with Controlled Alignment of Barium Titanate Nanowires
Malakooti, M. H., Julé, F., & Sodano, H. A. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b13643 · Cited by 95
MXene wearables: properties, fabrication strategies, sensing mechanism and applications
Kedambaimoole, V., Harsh, K., Rajanna, K., Sen, P., Nayak, M. M., & Kumar, S. (2022) · Materials Advances · doi:10.1039/d1ma01170g · Cited by 94
Research and application prospect of short carbon fiber reinforced ceramic composites
Zhu, T., & Wang, Z. (2023) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2023.07.007 · Cited by 95
Yuan, M., Wang, L., Liu, X., Du, X., Zhang, G., Chang, Y., Xia, Q., Hu, Q., & Zhou, A. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.138686 · Cited by 93
Advanced supramolecular design for direct ink writing of soft materials
Tang, M., Zhong, Z., & Ke, C. (2023) · Chemical Society Reviews · doi:10.1039/d2cs01011a · Cited by 93
Lignin-based additive materials: A review of current status, challenges, and future perspectives
Shah, S. W. A., Xu, Q., Ullah, M. W., Zahoor, Z., Sethupathy, S., Morales, G. M., Sun, J., & Zhu, D. (2023) · Additive manufacturing · doi:10.1016/j.addma.2023.103711 · Cited by 94
Micro additive manufacturing of glucose biosensors: A feasibility study
Nesaei, S., Song, Y., Wang, Y., Ruan, X., Du, D., Gozen, B. A., & Lin, Y. (2018) · Analytica Chimica Acta · doi:10.1016/j.aca.2018.09.012 · Cited by 93
3D printing vertically: Direct ink writing free-standing pillar arrays
Nan, B., Galindo-Rosales, F. J., & Ferreira, J. M. F. (2020) · Materials Today · doi:10.1016/j.mattod.2020.01.003 · Cited by 93
Topology optimization and 3D printing of multimaterial magnetic actuators and displays
Sundaram, S., Skouras, M., Kim, D. S., van den Heuvel, L., & Matusik, W. (2019) · Science Advances · doi:10.1126/sciadv.aaw1160 · Cited by 92
“We chose an additive manufacturing approach for our actuator fabrication due to rapid progress in three-dimensional (3D) printing that has enabled precisionmanufacturing (30, 31) of complex structures (32–36) with diversematerials (37–42).”
Method3D printed protein/polysaccharide food simulant for dysphagia diet: Impact of cellulose nanocrystals
Zhang, C., Wang, C., Girard, M., Therriault, D., & Heuzey, M. (2023) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2023.109455 · Cited by 92
Out‐of‐Plane 3D‐Printed Microfibers Improve the Shear Properties of Hydrogel Composites
de Ruijter, M., Hrynevich, A., Haigh, J. N., Hochleitner, G., Castilho, M. D., Gröll, J., Malda, J., & Dalton, P. D. (2017) · Small · doi:10.1002/smll.201702773 · Cited by 91
Pal, S., Su, Y.-Z., Chen, Y., Yu, C., Kung, C., & Yu, S. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c02690 · Cited by 91
3D printed nanomaterial-based electronic, biomedical, and bioelectronic devices
Hales, S. H., Tokita, E., Neupane, R., Ghosh, U., Elder, B., Wirthlin, D. J., & Kong, Y. L. (2020) · Nanotechnology · doi:10.1088/1361-6528/ab5f29 · Cited by 91
“Inks can be formulated from polymeric and colloidal suspensions [59], and because no high temperatures are involved in the printing process, bioprinting (the printing of living cells) is also possible [21, 60–62].”
BackgroundReview of mechanisms and deformation behaviors in 4D printing
Ding, H., Zhang, X., Liu, Y., & Ramakrishna, S. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-03871-3 · Cited by 91
Preliminary 3D printing of large inclined-shaped alumina ceramic parts by direct ink writing
Yang, L., Zeng, X., Ditta, A., Feng, B., Su, L., & Zhang, Y. (2020) · Journal of Advanced Ceramics · doi:10.1007/s40145-020-0369-6 · Cited by 90
Wang, Z., Yang, W., Liu, R., Zhang, X., Nie, H., & Liu, Y. (2021) · Composites Science and Technology · doi:10.1016/j.compscitech.2021.108652 · Cited by 90
3D printing of thermosets with diverse rheological and functional applicabilities
Sun, Y., Wang, L., Ni, Y., Zhang, H., Cui, X., Li, J., Zhu, Y., Liu, J., Zhang, S., Chen, Y., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-35929-y · Cited by 92
3D Printed Graphene and Graphene/Polymer Composites for Multifunctional Applications
Wu, Y., An, C., & Guo, Y. (2023) · Materials · doi:10.3390/ma16165681 · Cited by 90
Cell and organ printing turns 15: Diverse research to commercial transitions
Ringeisen, B. R., Pirlo, R. K., Wu, P. K., Boland, T., Huang, Y., Sun, W., Hamid, Q., & Chrisey, D. B. (2013) · MRS Bulletin · doi:10.1557/mrs.2013.209 · Cited by 79
Ordonez, E. F., Gallego, J. M., & Colorado, H. A. (2019) · Applied Clay Science · doi:10.1016/j.clay.2019.105285 · Cited by 89
Yun, X., Lu, B., Xiong, Z., Jia, B., Tang, B., Mao, H., Zhang, T., & Wang, X. (2019) · RSC Advances · doi:10.1039/c9ra04882k · Cited by 89
Synthesis of Three‐Dimensional Reduced‐Graphene Oxide from Graphene Oxide
Singh, R., Ullah, S., Rao, N., Singh, M., Patra, I., Darko, D. A., Issac, C. P. J., Esmaeilzadeh‐Salestani, K., Kanaoujiya, R., & Vijayan, V. (2022) · Journal of Nanomaterials · doi:10.1155/2022/8731429 · Cited by 90
Shear‐Driven Direct‐Write Printing of Room‐Temperature Gallium‐Based Liquid Metal Alloys
Cook, A. B., Parekh, D. P., Ladd, C., Kotwal, G., Panich, L., Durstock, M. F., Dickey, M. D., & Tabor, C. E. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201900400 · Cited by 86
3D-printed twisted yarn-type Li-ion battery towards smart fabrics
Praveen, S., Sim, G. S., Ho, C. W., & Lee, C. W. (2021) · Energy storage materials · doi:10.1016/j.ensm.2021.07.024 · Cited by 86
Thixotropic rheology of concentrated alumina colloidal gels for solid freeform fabrication
Zhu, C. Y., & Smay, J. E. (2011) · Journal of Rheology · doi:10.1122/1.3573828 · Cited by 86
A nanophotonic laser on a graph
Gaio, M., Saxena, D., Bertolotti, J., Pisignano, D., Camposeo, A., & Sapienza, R. (2019) · Nature Communications · doi:10.1038/s41467-018-08132-7 · Cited by 86
3D printed versus spherical adsorbents for gas sweetening
Middelkoop, V., Coenen, K., Schalck, J., Van Sint Annaland, M., & Gallucci, F. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.09.130 · Cited by 81
“This involved the direct fibre extrusion (‘direct writing’) [22] of a low viscosity 13X zeolite or carbon containing paste through a nozzle of a syringe while the position of the sample was defined via a computer numerically controlled (CNC) x–y–z stage operated through a control panel, its own native operating system…”
MethodLignin‐Based Direct Ink Printed Structural Scaffolds
Jiang, B., Yao, Y., Liang, Z., Gao, J., Chen, G., Xia, Q., Mi, R., Jiao, M., Wang, X., & Hu, L. (2020) · Small · doi:10.1002/smll.201907212 · Cited by 85
Recent Development and Applications of Advanced Materials via Direct Ink Writing
Tsang, C. H. A., Zhang, J., Hui, K. N., Hui, K. S., & Huang, H. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202101358 · Cited by 85
Hydrogels and conductive hydrogels for implantable bioelectronics
Sagdic, K., Lavado, E. F., Mariello, M., Akouissi, O., & Lacour, S. P. (2023) · MRS Bulletin · doi:10.1557/s43577-023-00536-1 · Cited by 86
Polymer Microvascular Network Composites
Olugebefola, S. C., Aragón, A. M., Hansen, C. J., Hamilton, A., Kozola, B. D., Wu, W., Geubelle, P. H., Lewis, J. A., Sottos, N. R., & White, S. R. (2010) · Journal of Composite Materials · doi:10.1177/0021998310371537 · Cited by 85
“FUGITIVE SCAFFOLD PROCESSES The direct ink writing (DIW) technique involves the controlled extrusion of fugitive viscoelastic inks through a fine nozzle to build 3D structures [46].”
MethodSelf-citationRheological design of 3D printable all-inorganic inks using BiSbTe-based thermoelectric materials
Eom, Y., Kim, F., Yang, S. E., Son, J. S., & Chae, H. G. (2019) · Journal of Rheology · doi:10.1122/1.5058078 · Cited by 84
Recent advances in 3D printed electrode materials for electrochemical energy storage devices
Mubarak, S., Dhamodharan, D., & Byun, H. (2023) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2023.01.037 · Cited by 84
Better ceramics through colloid chemistry
Moreno, R. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2019.10.014 · Cited by 84
Adaptive elastic metastructures from magneto-active elastomers
Pierce, C. D., Willey, C. L., Chen, V. W., Hardin, J. O., Berrigan, J. D., Juhl, A. T., & Matlack, K. H. (2020) · Smart Materials and Structures · doi:10.1088/1361-665x/ab80e4 · Cited by 84
Wang, Z., Ren, J., Liu, R., Sun, X., Huang, D., Xu, W., Jiang, J., Ma, K., & Liu, Y. (2020) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2020.105957 · Cited by 84
Three-dimensional micro/nanoscale architectures: fabrication and applications
Xu, Q., Lv, Y., Dong, C., Sreenivasan, S. T., Tian, A., Zhang, H., Tang, Y., Yu, Z., & Li, N. (2015) · Nanoscale · doi:10.1039/c5nr02048d · Cited by 83
3D printing of cellular materials for advanced electrochemical energy storage and conversion
Tian, X., & Zhou, K. (2020) · Nanoscale · doi:10.1039/d0nr00291g · Cited by 83
Siddiqui, S., Surananai, S., Sainath, K., Khan, M. Z., Kuppusamy, R. R. P., & Suneetha, Y. K. (2023) · European Polymer Journal · doi:10.1016/j.eurpolymj.2023.112298 · Cited by 83
Robotic deposition of 3d nanocomposite and ceramic fiber architectures via UV curable colloidal inks
de Hazan, Y., Thänert, M., Trunec, M., & Mišák, J. (2012) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2011.12.007 · Cited by 83
Ameta, K. L., Solanki, V. S., Singh, V., Devi, A. P., Chundawat, R. S., & Haque, S. (2022) · Sustainable materials and technologies · doi:10.1016/j.susmat.2022.e00481 · Cited by 82
Anisotropy of graphene scaffolds assembled by three-dimensional printing
Huang, K., Yang, J., Dong, S., Feng, Q., Zhang, X., Ding, Y., & Hu, J. (2018) · Carbon · doi:10.1016/j.carbon.2017.12.120 · Cited by 83
Colloidal Materials for 3D Printing
Zhu, C. Y., Pascall, A. J., Dudukovic, N. A., Worsley, M. A., Kuntz, J. D., Duoss, E. B., & Spadaccini, C. M. (2019) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-060718-030133 · Cited by 82
Research progress of ceramic matrix composite parts based on additive manufacturing technology
Lu, Z., Cao, J., Song, Z., Li, D., & Lu, B. (2019) · Virtual and Physical Prototyping · doi:10.1080/17452759.2019.1607759 · Cited by 82
“(1) The ink needs a certain of thixotropy behaviour (shear thinning) (Smay et al. 2002; Smay, Cesarano, and Lewis 2002; Lewis 2006; Cesarano III and Aksay 1988) which enables the mixed ink to be easily extruded through the micro print head and to possess high enough yield strength to retain the…”
BackgroundMaity, K., Mondal, A., & Saha, M. C. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c21680 · Cited by 81
Ragelle, H., Rahimian, S., Guzzi, E. A., Westenskow, P. D., Tibbitt, M. W., Schwach, G., & Langer, R. (2021) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2021.113990 · Cited by 80
Metadata
- Authors
- Lewis, J. A.
- Affiliations
- University of Illinois Urbana-Champaign (US)
- Corresponding author
- Lewis, J. A.
- ORCID
- Lewis, J. A.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2006-10-27
- Volume
- 16
- Issue
- 17
- Pages
- 2193-2204
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2143765114
- Cited by
- 1,740
- References
- 80
- Citations by year
- 2026: 153 · 2025: 150 · 2024: 145 · 2023: 180 · 2022: 183 · 2021: 202 · 2020: 154 · 2019: 161 · 2018: 115 · 2017: 78 · 2016: 53 · 2015: 38 · 2014: 28 · 2013: 19 · 2012: 26
- FWCI
- 17.02
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Functional Materials (publishedVersion)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Nanomaterials and Printing Technologies
- Keywords
- direct ink writing, 3D printing, additive manufacturing, 3D patterning, feature size reduction, composite materials, microfluidics, photonics, tissue engineering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.