Direct Ink Writing of 3D Functional Materials
The DOI matches its Crossref record; 81 of the 82 references it cites were found in a registry or an index, and 1 are not checked yet.
Abstract
The ability to pattern materials in three dimensions is critical for several technological applications, including composites, microfluidics, photonics, and tissue engineering. Direct‐write assembly allows one to design and rapidly fabricate materials in complex 3D shapes without the need for expensive tooling, dies, or lithographic masks. Here, recent advances in direct ink writing are reviewed with an emphasis on the push towards finer feature sizes. Opportunities and challenges associated with direct ink writing are also highlighted.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Inhibited Spontaneous Emission in Solid-State Physics and Electronics
Yablonovitch, E. (1987) · Physical Review Letters · doi:10.1103/physrevlett.58.2059 · Cited by 14,067
Fuzzy Nanoassemblies: Toward Layered Polymeric Multicomposites
Decher, G. (1997) · Science · doi:10.1126/science.277.5330.1232 · Cited by 10,054
Strong localization of photons in certain disordered dielectric superlattices
John, S. (1987) · Physical Review Letters · doi:10.1103/physrevlett.58.2486 · Cited by 10,029
Geometric Control of Cell Life and Death
Chen, C. S., Mrksich, M., Huang, S., Whitesides, G. M., & Ingber, D. E. (1997) · Science · doi:10.1126/science.276.5317.1425 · Cited by 4,657
Autonomic healing of polymer composites
White, S. R., Sottos, N. R., Geubelle, P. H., Moore, J. S., Kessler, M. R., Sriram, S. R., Brown, E. N., & Viswanathan, S. (2001) · Nature · doi:10.1038/35057232 · Cited by 4,575
Photonic crystals: putting a new twist on light
Joannopoulos, J. D., Villeneuve, P. R., & Fan, S. (1997) · Nature · doi:10.1038/386143a0 · Cited by 3,137
Tissue Engineering--Current Challenges and Expanding Opportunities
Griffith, L. G., & Naughton, G. (2002) · Science · doi:10.1126/science.1069210 · Cited by 2,343
Two-photon polymerization initiators for three-dimensional optical data storage and microfabrication
Cumpston, B. H., Ananthavel, S. P., Barlow, S., Dyer, D. L., Ehrlich, J. E., Erskine, L. L., Heikal, A. A., Kuebler, S. M., Lee, I.-Y. S., McCord-Maughon, D., et al. (1999) · Nature · doi:10.1038/17989 · Cited by 2,232
Functional hydrogel structures for autonomous flow control inside microfluidic channels
Beebe, D. J., Moore, J. S., Bauer, J. M., Yu, Q., Liu, R. H., Devadoss, C., & Jo, B.-H. (2000) · Nature · doi:10.1038/35007047 · Cited by 1,971
Fabrication of photonic crystals for the visible spectrum by holographic lithography
Campbell, M., Sharp, D. N., Harrison, M. T., Denning, R. G., & Turberfield, A. J. (2000) · Nature · doi:10.1038/35003523 · Cited by 1,675
Research works printed but not linked: 5
- Cesarano J., 1998, Ceram. Ind., 184, 94
- G. He D. A. Hirschfeld J. C. Cesarano III. inProc. of 24th Int. Conf. & Exposition on Engineering Ceramics and Structures The American Ceramic Society Westerville OH2000 Paper No. C‐071‐00.
- J.‐W. Choi C. H. Ahn inProc. of Microfluidic Devices and Systems III Santa Clara CA USA 4177 154 2000. SPIE. · doi:10.1117/12.395652
- S. W. Jones inChaos Applied to Fluid Mixing(Eds: H. Aref M. S. El Naschie) Pergamon Oxford UK1995 p. 185.
- Cha J. N., 2000, Nature, 403, 403
Cited by
Items 401–500 of 1,000
Xiong, Z., Yun, X., Qiu, L., Sun, Y., Tang, B. H. J., He, Z., Xiao, J., Chung, D. C. K., Ng, T. W., Hao, Y., et al. (2019) · Advanced Materials · doi:10.1002/adma.201804434 · Cited by 80
Courtial, E., Perrinet, C., Colly, A., Mariot, D., Frances, J.-M., Fulchiron, R., & Marquette, C. A. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.04.006 · Cited by 80
Tang, S., Yang, L., Li, G., Liu, X., & Fan, Z. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.05.034 · Cited by 80
Lee, B. J., Hsiao, K., Lipkowitz, G., Samuelsen, T., Tate, L., & DeSimone, J. M. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.102800 · Cited by 79
Jalali, A., Zhang, R., Rahmati, R., Nofar, M., Sain, M. M., & Park, C. B. (2022) · Nano Research · doi:10.1007/s12274-022-5053-4 · Cited by 79
Ullah, M., Wahab, A., Khan, S. U., Naeem, M., Rehman, K. U., Ali, H. H. M., Ullah, A., Khan, A., Khan, N. R., Rizg, W. Y., et al. (2023) · European Polymer Journal · doi:10.1016/j.eurpolymj.2023.112240 · Cited by 79
Designing colloidal suspensions for directed materials assembly
Conrad, J. C., Ferreira, S. R., Yoshikawa, J., Shepherd, R. F., Ahn, B. Y., & Lewis, J. A. (2010) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2010.11.002 · Cited by 79
“Colloidal materials in planar and three-dimensional motifs have been patterned by droplet and filamentary methods for applications that include printed electronics, photonics, advanced ceramics, sensors, composites, and tissue engineering scaffolds [3,79,80].”
MethodSelf-citationRing Shuttling Controls Macroscopic Motion in a Three‐Dimensional Printed Polyrotaxane Monolith
Lin, Q., Hou, X. L., & Ke, C. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201612440 · Cited by 80
Fahmy, A. R., Becker, T. M., & Jekle, M. (2020) · Innovative Food Science & Emerging Technologies · doi:10.1016/j.ifset.2020.102384 · Cited by 79
Postiglione, G., Alberini, M., Leigh, S. J., Levi, M., & Turri, S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b01830 · Cited by 78
Three-dimensional carbon architectures for electrochemical capacitors
Song, Y., Liu, T., Qian, F., Zhu, C. Y., Yao, B., Duoss, E. B., Spadaccini, C. M., Worsley, M. A., & Li, Y. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.07.081 · Cited by 78
Additive manufacturing for the development of optical/photonic systems and components
Berglund, G. D., Wisniowiecki, A. M., Gawedzinski, J., Applegate, B. E., & Tkaczyk, T. (2022) · Optica · doi:10.1364/optica.451642 · Cited by 78
Aerogels, additive manufacturing, and energy storage
Chandrasekaran, S., Lin, D., Li, Y., & Worsley, M. A. (2023) · Joule · doi:10.1016/j.joule.2023.03.021 · Cited by 78
Tu, R., & Sodano, H. A. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102180 · Cited by 77
Three-dimensional printing of graphene-based materials and the application in energy storage
Wu, X., Mu, F., & Lin, Z. (2021) · Materials Today Advances · doi:10.1016/j.mtadv.2021.100157 · Cited by 77
Field-assisted additive manufacturing of polymeric composites
Safaee, S., Schock, M., Joyee, E. B., Pan, Y., & Chen, R. K. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.102642 · Cited by 77
Sustainable valorization of asphaltenes via flash joule heating
Saadi, M. A. S. R., Advincula, P. A., Thakur, M. S. H., Khater, A. Z., Saad, S., Zeraati, A. S., Nabil, S. K., Zinke, A., Roy, S., Lou, M., et al. (2022) · Science Advances · doi:10.1126/sciadv.add3555 · Cited by 77
“…as one of the most versatile AM methods that can develop high-performance 3D structures by dispensing high-viscosity materials through a nozzle or orifice in a layer-by-layer fashion on a computer-controlled translation stage, thereby eliminating the need for any mold or template ( 36 , 37 ).”
Fang, Y., Ni, Y., Leo, S., Wang, B., Basile, V., Taylor, C. R., & Jiang, P. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b07220 · Cited by 77
Study of gelatin as an effective energy absorbing layer for laser bioprinting
Xiong, R., Zhang, Z., Chai, W., Chrisey, D. B., & Huang, Y. H. (2017) · Biofabrication · doi:10.1088/1758-5090/aa74f2 · Cited by 77
Roach, D. J., Roberts, C. C., Wong, J., Kuang, X., Kovitz, J. M., Zhang, Q., Spence, T. G., & Qi, H. J. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101544 · Cited by 77
Three‐Dimensional Microscaffolds Exhibiting Spatially Resolved Surface Chemistry
Richter, B., Pauloehrl, T., Kaschke, J., Fichtner, D., Fischer, J., Greiner, A. M., Wedlich, D., Wegener, M., Delaittre, G., Barner‐Kowollik, C., et al. (2013) · Advanced Materials · doi:10.1002/adma.201302678 · Cited by 76
Review—Recent Progresses in 4D Printing of Gel Materials
Ahmed, K., Shiblee, M. N. I., Khosla, A., Nagahara, L. A., Thundat, T. G., & Furukawa, H. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab6e60 · Cited by 76
Additive manufacturing of polymer-based structures by extrusion technologies
Maguire, A., Pottackal, N. T., Saadi, M. A. S. R., Rahman, M. M., & Ajayan, P. M. (2020) · Oxford Open Materials Science · doi:10.1093/oxfmat/itaa004 · Cited by 76
Rau, D. A., Forgiarini, M., & Williams, C. B. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.101996 · Cited by 76
From pixels to voxels: A mechanistic perspective on volumetric 3D-printing
Thijssen, Q., Toombs, J. T., Li, C. C., Taylor, H., & Vlierberghe, S. V. (2023) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2023.101755 · Cited by 76
Indirect prediction of 3D printability of mashed potatoes based on LF-NMR measurements
Liu, Z., Zhang, M., & Ye, Y. (2020) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2020.110137 · Cited by 77
Doping‐Induced Viscoelasticity in PbTe Thermoelectric Inks for 3D Printing of Power‐Generating Tubes
Lee, J., Choo, S., Ju, H., Hong, J., Yang, S. E., Kim, F., Gu, D. H., Jang, J., Kim, G., Ahn, S., et al. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202100190 · Cited by 76
Review of 3D printing in photocatalytic substrates and catalysts
Li, N., Tong, K., Yang, L., & Du, X. (2022) · Materials Today Energy · doi:10.1016/j.mtener.2022.101100 · Cited by 75
Marnot, A., Koube, K. D., Jang, S., Thadhani, N. N., Kacher, J., & Brettmann, B. K. (2023) · Virtual and Physical Prototyping · doi:10.1080/17452759.2023.2279149 · Cited by 75
“Regarding nozzle geometry, circular nozzles are commonly used to extrude fi laments, however nozzle tips with square and hexagonal shapes have also been designed and successfully utilised [124].”
MethodHigh-speed video study of laser-induced forward transfer of silver nano-suspensions
Mathews, S. A., Auyeung, R. C. Y., Kim, H., Charipar, N. A., & Piqué, A. (2013) · Journal of Applied Physics · doi:10.1063/1.4817494 · Cited by 75
Praveen, S., Santhoshkumar, P., Joe, Y. C., Senthil, C., & Lee, C. W. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2020.100688 · Cited by 75
Polymer 4D printing: Advanced shape‐change and beyond
Imrie, P., & Jin, J. (2021) · Journal of Polymer Science · doi:10.1002/pol.20210718 · Cited by 75
Fluid Bath-Assisted 3D Printing for Biomedical Applications: From Pre- to Postprinting Stages
Hua, W., Mitchell, K., Raymond, L., Godina, B., Zhao, D., Zhou, W., & Jin, Y. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.1c00910 · Cited by 74
Advances in 3D printed sensors for food analysis
Santos, D. M. D., Cardoso, R. M., Migliorini, F. L., Facure, M. H. M., Mercante, L. A., Mattoso, L. H. C., & Correa, D. S. (2022) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2022.116672 · Cited by 75
Hydrogel based 3D printing: Bio ink for tissue engineering
Taneja, H., Salodkar, S. M., Parmar, A. S., & Chaudhary, S. (2022) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2022.120390 · Cited by 75
Nanoengineered Textiles for Outdoor Personal Cooling and Drying
Miao, D., Wang, X., Yu, J., & Ding, B. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202209029 · Cited by 74
Direct ink writing of 3–3 piezoelectric composite
Li, Y., Li, L., & Li, B. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.09.124 · Cited by 74
Direct ink write fabrication of transparent ceramic gain media
Jones, I. K., Seeley, Z. M., Cherepy, N. J., Duoss, E. B., & Payne, S. A. (2017) · Optical Materials · doi:10.1016/j.optmat.2017.10.005 · Cited by 74
Material Extrusion-Based Additive Manufacturing with Blends of Polypropylene and Hydrocarbon Resins
Das, A., Marnot, A., Fallon, J. J., Martin, S. M., Joseph, E. G., & Bortner, M. J. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.9b01127 · Cited by 74
Xiong, H., Chen, H., Zhao, L., Huang, Y., Zhou, K., & Zhang, D. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2019.02.045 · Cited by 73
Tashman, J. W., Shiwarski, D. J., Coffin, B. D., Ruesch, A., Lanni, F., Kainerstorfer, J. M., & Feinberg, A. W. (2022) · Biofabrication · doi:10.1088/1758-5090/ac975e · Cited by 74
“As our system with integrated OCT is an extrusion based platform, it is also feasible to use this approach for imaging in air for direct ink writing or other 3D printing techniques [53].”
3D-bioprinted human tissue and the path toward clinical translation
Bliley, J. M., Shiwarski, D. J., & Feinberg, A. W. (2022) · Science Translational Medicine · doi:10.1126/scitranslmed.abo7047 · Cited by 74
“Briefly, extrusion-based printing, also known as direct ink writing, relies on the deposition of material through a nozzle to create a defined 3D structure (3).”
BackgroundKetel, S., Falzone, G., Wang, B., Washburn, N. R., & Sant, G. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.03.022 · Cited by 74
Prospects for Additive Manufacturing in Contact Lens Devices
Alam, F., Elsherif, M., AlQattan, B., Ali, M., Ahmed, I., Salih, A. E., Savariraj, A. D., Yetisen, A. K., Park, S., & Butt, H. (2020) · Advanced Engineering Materials · doi:10.1002/adem.202000941 · Cited by 72
Additive manufacturing solidification methodologies for ink formulation
Xu, X., Yang, J., Jonhson, W., Wang, Y., Suwardi, A., Ding, J., Guan, C., & Zhang, D. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.102939 · Cited by 72
Recent Advances in Multi-Material 3D Printing of Functional Ceramic Devices
Chen, H., Guo, L., Zhu, W., & Li, C. (2022) · Polymers · doi:10.3390/polym14214635 · Cited by 72
Seamless Integration of Conducting Hydrogels in Daily Life: From Preparation to Wearable Application
Imani, K. B. C., Dodda, J. M., Yoon, J., Torres, F. G., Imran, A. B., Deen, G. R., & AlAnsari, R. (2024) · Advanced Science · doi:10.1002/advs.202306784 · Cited by 72
Highly porous metals and ceramics
Colombo, P., & Degischer, H. P. (2010) · Materials Science and Technology · doi:10.1179/026708310x12756557336157 · Cited by 72
Planar and Three-Dimensional Printing of Conductive Inks
Ahn, B. Y., Walker, S. B., Slimmer, S. C., Russo, A., Gupta, A., Kranz, S., Duoss, E. B., Malkowski, T. F., & Lewis, J. A. (2011) · Journal of Visualized Experiments · doi:10.3791/3189 · Cited by 72
Self-citationTransitional Suspensions Containing Thermosensitive Dispersant for Three-Dimensional Printing
Wang, X., Sun, Y., Peng, C., Luo, H., Wang, R., & Zhang, D. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b07913 · Cited by 72
Fabrication of ZnO periodic structures by 3D printing
Tubio, C. R., Guitián, F., & Gil, Á. (2016) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2016.05.025 · Cited by 72
Chang, J., He, J., Lei, Q., & Li, D. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b04051 · Cited by 72
MXene-based 3D porous macrostructures for electrochemical energy storage
Tontini, G., Greaves, M. D., Ghosh, S., Bayram, V., & Barg, S. (2020) · Journal of Physics Materials · doi:10.1088/2515-7639/ab78f1 · Cited by 72
Mondal, D., Srinivasan, A., Comeau, P., Toh, Y., & Willett, T. L. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.111400 · Cited by 72
A Guide to Printed Stretchable Conductors
Sakorikar, T., Mihaliak, N., Krisnadi, F., Ma, J., Kim, T., Kong, M., Awartani, O., & Dickey, M. D. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00569 · Cited by 71
Direct Laser Writing of Low‐Density Interdigitated Foams for Plasma Drive Shaping
Oakdale, J. S., Smith, R. F., Forien, J., Smith, W., Ali, S. J., Aji, L. B. B., Willey, T. M., Ye, J., van Buuren, T., Worthington, M. A., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201702425 · Cited by 71
Patel, D. K., Cohen, B., Etgar, L., & Magdassi, S. (2018) · Materials Horizons · doi:10.1039/c8mh00296g · Cited by 71
Additive Manufacturing of 3D Structures Composed of Wood Materials
Kam, D., Layani, M., BarkaiMinerbi, S., Orbaum, D., BenHarush, S. A., Shoseyov, O., & Magdassi, S. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900158 · Cited by 71
Zhang, Y., Zhu, G., Dong, B., Wang, F., Tang, J., Stadler, F. J., Yang, G., Hong, S., & Xing, F. (2021) · Nature Communications · doi:10.1038/s41467-020-20299-6 · Cited by 70
Three‐dimensional printing of high‐mass loading electrodes for energy storage applications
Yang, H., Feng, Z., Teng, X., Guan, L., Hu, H., & Wu, M. (2021) · InfoMat · doi:10.1002/inf2.12181 · Cited by 70
“After printing, the as-obtained structures need to be solidified with thermal energy, gelation, liquid evaporation, or solvent-driven reactions.(45) The prerequisite for DIW process is to endow printing inks with ideal rheological behavior.”
MethodBakhtiari, S. S. E., Bakhsheshi‐Rad, H. R., Karbasi, S., Razzaghi, M., Tavakoli, M., Ismail, A. F., Sharif, S., Ramakrishna, S., Chen, D., & Berto, F. (2021) · Advanced Engineering Materials · doi:10.1002/adem.202100477 · Cited by 70
Additive manufacturing of bulk metallic glass: Principles, materials and prospects
Wu, W., Li, X., Liu, Q., Fuh, J. Y. H., Zheng, A., Zhou, Y., Ren, L., & Li, G. (2022) · Materials Today Advances · doi:10.1016/j.mtadv.2022.100319 · Cited by 70
Functional microfluidics: theory, microfabrication, and applications
Xie, M., Zhan, Z., Li, Y., Zhao, J., Zhang, C., Wang, Z., & Wang, Z. (2024) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ad2c5f · Cited by 70
“…printing techniques including inkjet [199], selective laser sintering/melting [24, 200], fused deposition modeling (FDM) [201], direct ink writing [202, 203], SLA [154], digital light processing (DLP) [15], and two-photon polymerization (TPP) [204, 205], which differ in the operating principles,…”
MethodElastomeric Tiles for the Fabrication of Inflatable Structures
Morin, S. A., Kwok, S. W., Lessing, J., Ting, J., Shepherd, R. F., Stokes, A. A., & Whitesides, G. M. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201401339 · Cited by 70
3D Printed Silicones with Shape Memory
Wu, A. S., Small, W., Bryson, T. M., Cheng, E., Metz, T. R., Schulze, S. E., Duoss, E. B., & Wilson, T. S. (2017) · Scientific Reports · doi:10.1038/s41598-017-04663-z · Cited by 70
Xiong, H., Zhao, L., Chen, H., Wang, X., Zhou, K., & Zhang, D. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.151824 · Cited by 70
Roach, D. J., Rohskopf, A., Hamel, C. M., Reinholtz, W. D., Bernstein, R., Qi, H. J., & Cook, A. W. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.101950 · Cited by 61
Multi-material direct ink writing of photocurable elastomeric foams
Yirmibeşoğlu, O. D., Simonsen, L., Manson, R., Davidson, J. R., Healy, K., Mengüç, Y., & Wallin, T. J. (2021) · Communications Materials · doi:10.1038/s43246-021-00186-3 · Cited by 69
Multiscale 3D printing via active nozzle size and shape control
Kang, S. W., & Mueller, J. (2024) · Science Advances · doi:10.1126/sciadv.adn7772 · Cited by 69
“This allows AN3DP to extrude any material available for direct ink writing, including polymers, hydrogels, ceramics, metals, composites, and biological materials ( 1 , 4 , 31 ).”
BackgroundBégin‐Drolet, A., Dussault, M.-A., Fernandez, S. A., Larose-Dutil, J., Leask, R. L., Hoesli, C. A., & Ruel, J. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.03.006 · Cited by 69
Hybrid Materials for Functional 3D Printing
Cooperstein, I., Keneth, E. S., Shukrun, E., Rosental, T., Wang, X., Kamyshny, A. L., & Magdassi, S. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201800996 · Cited by 67
Sun, Y.-C., Wan, Y., Nam, R., Chu, M., & Naguib, H. E. (2019) · Scientific Reports · doi:10.1038/s41598-019-55298-1 · Cited by 68
Progress and perspectives on composite laser ceramics: A review
Tian, F., Ikesue, A., & Li, J. (2021) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2021.12.061 · Cited by 67
Additive manufacturing of bioactive glass biomaterials
Simorgh, S., Alasvand, N., Khodadadi, M., Ghobadi, F., Kebria, M. M., Milan, P. B., Kargozar, S., Baino, F., Mobasheri, A., & Mozafari, M. (2022) · Methods · doi:10.1016/j.ymeth.2022.10.010 · Cited by 67
Reactive inkjet printing of polyurethanes
Kröber, P., Delaney, J. T., Perelaer, J., & Schubert, U. S. (2009) · Journal of Materials Chemistry · doi:10.1039/b823135d · Cited by 67
Cross-linkable multi-stimuli responsive hydrogel inks for direct-write 3D printing
Karis, D., Ono, R. J., Zhang, M., Vora, A., Storti, D., Ganter, M. A., & Nelson, A. (2017) · Polymer Chemistry · doi:10.1039/c7py00831g · Cited by 68
Bouncing and 3D printable hybrids with self-healing properties
Tallia, F., Russo, L., Li, S., Orrin, A. L. H., Shi, X., Chen, S., Steele, J. A. M., Meille, S., Chevalier, J., Lee, P. D., et al. (2018) · Materials Horizons · doi:10.1039/c8mh00027a · Cited by 67
3D printing of materials with spatially non-linearly varying properties
Ren, L., Song, Z., Liu, H., Han, Q., Zhao, C., Derby, B., Liu, Q., & Ren, L. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.07.012 · Cited by 67
3D Printed Tubulanes as Lightweight Hypervelocity Impact Resistant Structures
Sajadi, S. M., Woellner, C. F., Ramesh, P., Eichmann, S. L., Sun, Q., Boul, P. J., Thaemlitz, C. J., Rahman, M. M., Baughman, R. H., Galvao, D. S., et al. (2019) · Small · doi:10.1002/smll.201904747 · Cited by 67
Cu2O Inverse Woodpile Photonic Crystals by Prism Holographic Lithography and Electrodeposition
Park, S., Miyake, M., Yang, S., & Braun, P. V. (2011) · Advanced Materials · doi:10.1002/adma.201004547 · Cited by 66
Micro- and macroscopic design of alumina ceramics by robocasting
Fu, Z., Freihart, M., Wahl, L., Fey, T., Greil, P., & Travitzky, N. A. (2017) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2017.03.052 · Cited by 66
Continuously 3D printed quantum dot-based electrodes for lithium storage with ultrahigh capacities
Zhang, C., Shen, K. B., Li, B., Li, S., & Yang, S. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta08559e · Cited by 66
Sintering processes in direct ink write additive manufacturing: A mesoscopic modeling approach
Abdeljawad, F., Bolintineanu, D., Cook, A., Brown‐Shaklee, H. J., DiAntonio, C. B., Kammler, D. R., & Roach, R. A. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.01.011 · Cited by 66
Wang, Z., Zhang, Q., Yue, Y., Xu, J., Xu, W., Sun, X., Chen, Y., Jiang, J., & Liu, Y. (2019) · Nanotechnology · doi:10.1088/1361-6528/ab1287 · Cited by 66
“In the current study, a direct ink writing technique [38, 39] is utilized to construct graphene/PDMS inks into high ordered 3D porous structures, and the detailed fabrication process is shown in figure 1.”
Method3D Printing of Electrically Responsive PVC Gel Actuators
Wang, Z., Wang, Y., Wang, Z., He, Q., Li, C., & Cai, S. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c05082 · Cited by 65
Simulated filament shapes in embedded 3D printing
Friedrich, L. M., & Seppala, J. E. (2021) · Soft Matter · doi:10.1039/d1sm00731a · Cited by 65
Direct ink writing of 3D piezoelectric ceramics with complex unsupported structures
Li, Z., Li, J., Luo, H., Yuan, X., Wang, X., Xiong, H., & Zhang, D. (2022) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2022.03.038 · Cited by 65
Vorobiov, V. K., Sokolova, M. P., Bobrova, N. V., Elokhovsky, V. Y., & Smirnov, M. A. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119475 · Cited by 65
Arrested Phase Separation of Elastin-like Polypeptide Solutions Yields Stiff, Thermoresponsive Gels
Glassman, M., & Olsen, B. D. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b01026 · Cited by 65
3D-printed bioanalytical devices
Bishop, G. W., Satterwhite-Warden, J. E., Kadimisetty, K., & Rusling, J. F. (2016) · Nanotechnology · doi:10.1088/0957-4484/27/28/284002 · Cited by 65
“method for producing three-dimensional objects [7].”
Controllable Ceramic Green‐Body Configuration for Complex Ceramic Architectures with Fine Features
Zhang, D., Peng, E., Borayek, R., & Ding, J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201807082 · Cited by 65
3D Printing of Biodegradable Polymer Vascular Stents: A Review
Hua, W., Shi, W., Mitchell, K., Raymond, L., Coulter, R., Zhao, D., & Jin, Y. (2022) · Chinese Journal of Mechanical Engineering Additive Manufacturing Frontiers · doi:10.1016/j.cjmeam.2022.100020 · Cited by 64
Advances in Additive Manufacturing Techniques for Electrochemical Energy Storage
De, A., Ramasubramian, B., Ramakrishna, S., & Chellappan, V. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202301439 · Cited by 64
Metallic nanoparticle inks for flexible printed electronics
Cai, R., Liang, C., Duan, Y., Zhao, Z., Zhang, X., He, P., Yang, J., Lai, W., Wei, J., & Tian, L. (2025) · FlexMat. · doi:10.1002/flm2.40 · Cited by 64
Active Mixing of Reactive Materials for 3D Printing
Golobic, A. M., Durban, M., Fisher, S., Grapes, M. D., Ortega, J. M., Spadaccini, C. M., Duoss, E. B., Gash, A. E., & Sullivan, K. T. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201900147 · Cited by 64
Boron nitride‐reinforced polysilazane‐derived ceramic composites via direct‐ink writing
Kemp, J. W., Hmeidat, N. S., & Compton, B. G. (2020) · Journal of the American Ceramic Society · doi:10.1111/jace.17084 · Cited by 64
Romani, A., Suriano, R., & Levi, M. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.135779 · Cited by 63
dos Santos, V. I., Chevalier, J., Fredel, M. C., Henriques, B. A. P. D. C., & Grémillard, L. (2024) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2024.100841 · Cited by 63
Quan, Z., Larimore, Z., Qin, X., Yu, J., Mirotznik, M. S., Byun, J., Oh, Y., & Chou, T. (2016) · Composites Science and Technology · doi:10.1016/j.compscitech.2016.05.015 · Cited by 63
3D Printed Photoresponsive Materials for Photonics
Nocentini, S., Martella, D., Parmeggiani, C., & Wiersma, D. S. (2019) · Advanced Optical Materials · doi:10.1002/adom.201900156 · Cited by 63
Metadata
- Authors
- Lewis, J. A.
- Affiliations
- University of Illinois Urbana-Champaign (US)
- Corresponding author
- Lewis, J. A.
- ORCID
- Lewis, J. A.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2006-10-27
- Volume
- 16
- Issue
- 17
- Pages
- 2193-2204
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2143765114
- Cited by
- 1,740
- References
- 80
- Citations by year
- 2026: 153 · 2025: 150 · 2024: 145 · 2023: 180 · 2022: 183 · 2021: 202 · 2020: 154 · 2019: 161 · 2018: 115 · 2017: 78 · 2016: 53 · 2015: 38 · 2014: 28 · 2013: 19 · 2012: 26
- FWCI
- 17.02
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Functional Materials (publishedVersion)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Nanomaterials and Printing Technologies
- Keywords
- direct ink writing, 3D printing, additive manufacturing, 3D patterning, feature size reduction, composite materials, microfluidics, photonics, tissue engineering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.