Direct Ink Writing of 3D Functional Materials
The DOI matches its Crossref record; 81 of the 82 references it cites were found in a registry or an index, and 1 are not checked yet.
Abstract
The ability to pattern materials in three dimensions is critical for several technological applications, including composites, microfluidics, photonics, and tissue engineering. Direct‐write assembly allows one to design and rapidly fabricate materials in complex 3D shapes without the need for expensive tooling, dies, or lithographic masks. Here, recent advances in direct ink writing are reviewed with an emphasis on the push towards finer feature sizes. Opportunities and challenges associated with direct ink writing are also highlighted.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Inhibited Spontaneous Emission in Solid-State Physics and Electronics
Yablonovitch, E. (1987) · Physical Review Letters · doi:10.1103/physrevlett.58.2059 · Cited by 14,067
Fuzzy Nanoassemblies: Toward Layered Polymeric Multicomposites
Decher, G. (1997) · Science · doi:10.1126/science.277.5330.1232 · Cited by 10,054
Strong localization of photons in certain disordered dielectric superlattices
John, S. (1987) · Physical Review Letters · doi:10.1103/physrevlett.58.2486 · Cited by 10,029
Geometric Control of Cell Life and Death
Chen, C. S., Mrksich, M., Huang, S., Whitesides, G. M., & Ingber, D. E. (1997) · Science · doi:10.1126/science.276.5317.1425 · Cited by 4,657
Autonomic healing of polymer composites
White, S. R., Sottos, N. R., Geubelle, P. H., Moore, J. S., Kessler, M. R., Sriram, S. R., Brown, E. N., & Viswanathan, S. (2001) · Nature · doi:10.1038/35057232 · Cited by 4,575
Photonic crystals: putting a new twist on light
Joannopoulos, J. D., Villeneuve, P. R., & Fan, S. (1997) · Nature · doi:10.1038/386143a0 · Cited by 3,137
Tissue Engineering--Current Challenges and Expanding Opportunities
Griffith, L. G., & Naughton, G. (2002) · Science · doi:10.1126/science.1069210 · Cited by 2,343
Two-photon polymerization initiators for three-dimensional optical data storage and microfabrication
Cumpston, B. H., Ananthavel, S. P., Barlow, S., Dyer, D. L., Ehrlich, J. E., Erskine, L. L., Heikal, A. A., Kuebler, S. M., Lee, I.-Y. S., McCord-Maughon, D., et al. (1999) · Nature · doi:10.1038/17989 · Cited by 2,232
Functional hydrogel structures for autonomous flow control inside microfluidic channels
Beebe, D. J., Moore, J. S., Bauer, J. M., Yu, Q., Liu, R. H., Devadoss, C., & Jo, B.-H. (2000) · Nature · doi:10.1038/35007047 · Cited by 1,971
Fabrication of photonic crystals for the visible spectrum by holographic lithography
Campbell, M., Sharp, D. N., Harrison, M. T., Denning, R. G., & Turberfield, A. J. (2000) · Nature · doi:10.1038/35003523 · Cited by 1,675
Research works printed but not linked: 5
- Cesarano J., 1998, Ceram. Ind., 184, 94
- G. He D. A. Hirschfeld J. C. Cesarano III. inProc. of 24th Int. Conf. & Exposition on Engineering Ceramics and Structures The American Ceramic Society Westerville OH2000 Paper No. C‐071‐00.
- J.‐W. Choi C. H. Ahn inProc. of Microfluidic Devices and Systems III Santa Clara CA USA 4177 154 2000. SPIE. · doi:10.1117/12.395652
- S. W. Jones inChaos Applied to Fluid Mixing(Eds: H. Aref M. S. El Naschie) Pergamon Oxford UK1995 p. 185.
- Cha J. N., 2000, Nature, 403, 403
Cited by
Items 601–700 of 1,000
Bioengineering Methods for Analysis of Cells In Vitro
Underhill, G. H., Galie, P. A., Chen, C. S., & Bhatia, S. N. (2012) · Annual Review of Cell and Developmental Biology · doi:10.1146/annurev-cellbio-101011-155709 · Cited by 48
“…a range of rapid prototyping technologies has been applied toward the generation of porous biomaterial scaffolds for therapeutic tissue engineering (Tsang & Bhatia 2004), and substantial work continues to be directed toward this area, with an emphasis on improved 3D resolution (Lewis 2006).”
BackgroundUV-assisted direct write of polymer-bonded magnets
Shen, A., Bailey, C. P., Ma, A. W. K., & Dardona, S. I. (2018) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2018.03.073 · Cited by 47
In‐Plane Direct‐Write Assembly of Iridescent Colloidal Crystals
Tan, A. T. L., Nagelberg, S. N., Chang‐Davidson, E., Tan, J., Yang, J. K. W., Kolle, M., & Hart, A. J. (2019) · Small · doi:10.1002/smll.201905519 · Cited by 47
Lignin-graphene oxide inks for 3D printing of graphitic materials with tunable density
Roman, J., Néri, W., Fierro, V., Celzard, A., Bentaleb, A., Ly, I., Zhong, J., Derré, A., & Poulin, P. (2020) · Nano Today · doi:10.1016/j.nantod.2020.100881 · Cited by 47
“The inks used for this approach must have a high viscosity with a shear-thinning behavior to ensure extrusion, and a sufficiently high storage modulus (G’) to recover a solid-like response in order to obtain a self-supporting printed structure [24,33].”
Background3D printed geopolymer: An efficient support for immobilization of Candida rugosa lipase
dos Santos, L. K., Botti, R., Innocentini, M. D. D. M., Marques, R. F. C., Colombo, P., de Paula, A. V., & Flumignan, D. L. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.128843 · Cited by 47
Tian, X., Wang, T., Ma, H., Tang, K. L., Hou, S., Jin, H., & Cao, G. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta03236d · Cited by 47
Feng, C., & Yu, S. (2021) · Polymers · doi:10.3390/polym13213614 · Cited by 47
“The ink should display shear-thinning behavior for facile material extrusion under a high printing rate and high yield stress for good self-supporting ability [14,15].”
BackgroundMaterials for Multiphoton 3D Microfabrication
Marder, S. R., Brédas, J., & Perry, J. W. (2007) · MRS Bulletin · doi:10.1557/mrs2007.107 · Cited by 47
Laurén, I., Farzan, A., Teotia, A. K., Lindfors, N. C., & Seppälä, J. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.129321 · Cited by 46
Flexible Fiber‐Shaped Supercapacitors: Structures, Materials, Fabrication Methods, and Applications
Liu, D., Xue, Y., Yang, X. P., Shen, Y., Zhang, P., Zheng, H., Wang, C., Chen, H., Zheng, X., & Zhang, T. (2025) · Interdisciplinary materials · doi:10.1002/idm2.12243 · Cited by 46
“After printing, the ink is cured through processes, such as liquid evaporation, gelation, thermal energy, or solvent ‐ induced phase change [163].”
Hoelzle, D. J., Alleyne, A. G., & Johnson, A. J. W. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.02.018 · Cited by 46
Characterization of Active Cooling and Flow Distribution in Microvascular Polymers
Kozola, B. D., Shipton, L. A., Natrajan, V. K., Christensen, K. T., & White, S. R. (2010) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x10379662 · Cited by 46
“Fabrication of samples was accomplished through a combination of direct-write assembly (Lewis, 2006) and molding.”
BackgroundMethodInfluential3D printing with silk: considerations and applications
DeBari, M. K., Keyser, M. N., Bai, M. A., & Abbott, R. D. (2018) · Connective Tissue Research · doi:10.1080/03008207.2018.1553959 · Cited by 47
Renteria, A., Diaz, J. A., He, B., Renteria-Marquez, I. A., Chavez, L. A., Regis, J. E., Liu, Y., Espalin, D., Tseng, T.-L., & Lin, Y. (2019) · Materials Research Express · doi:10.1088/2053-1591/ab4a36 · Cited by 46
Mantelli, A., Romani, A., Suriano, R., Levi, M., & Turri, S. (2021) · Advanced Engineering Materials · doi:10.1002/adem.202100116 · Cited by 46
How 3D printing can boost advances in analytical and bioanalytical chemistry
Ambrosi, A., & Bonanni, A. (2021) · Microchimica Acta · doi:10.1007/s00604-021-04901-2 · Cited by 46
Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials
Cipriani, C. E., Ha, T., Defilló, O. B. M., Myneni, M., Wang, Y., Benjamin, C. C., Wang, J. E., Pentzer, E., & Wei, P. (2021) · ACS Materials Au · doi:10.1021/acsmaterialsau.1c00017 · Cited by 46
Microextrusion Based 3D Printing – A Review
Udofia, E. N., & Zhou, W. (2018) · doi:10.26153/tsw/17201 · Cited by 46
A Review on Extrusion Additive Manufacturing of Pure Copper
Sakib-Uz-Zaman, C., & Khondoker, M. A. H. (2023) · Metals · doi:10.3390/met13050859 · Cited by 46
“Once the ink is prepared and loaded, the material is fed into an extrusion 3D printer by using a pneumatic feeding system [38–40].”
MethodManufacturing strategies for microvascular polymeric composites: A review
Saeed, M., Chen, Z., & Li, B. (2015) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.08.028 · Cited by 46
Three‐Dimensional Inkjet‐Printed Interconnects using Functional Metallic Nanoparticle Inks
Sadie, J. A., & Subramanian, V. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201401312 · Cited by 46
Gao, C., Rahaman, M. N., Gao, Q., Teramoto, A., & Abe, K. (2012) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34496 · Cited by 46
Directional Liquid Spreading over Chemically Defined Radial Wettability Gradients
Bliznyuk, O., Seddon, J. R. T., Veligura, V., Kooij, E. S., Zandvliet, H. J. W., & Poelsema, B. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am3008856 · Cited by 46
A Review on Recent Advances in Piezoelectric Ceramic 3D Printing
Park, J., Lee, D., Hur, S., Baik, J. M., Kim, H. S., & Song, H. (2023) · Actuators · doi:10.3390/act12040177 · Cited by 45
“DIW uses direct material deposition and operates by extruding a paste-like ink with shear-thinning properties [32].”
Review: Application of 3D Printing Technology in Soft Robots
Dong, H., Weng, T., Zheng, K., Sun, H. R., & Chen, B. (2024) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2023.0127 · Cited by 46
“94 Its main advantage on soft robots is a wide selection of soft materials, such as silicone elastomers, 95,96 liquid crystal elastomers, 97,98 hydrogels, 39,41 and SMPs. 99 Li et al. used DIW and commercially available silicone (DC737; Dow Corning) to directly print a pneumatic muscle and a soft…”
A Review of 3D Printing Batteries
Mottaghi, M., & Pearce, J. M. (2024) · Batteries · doi:10.3390/batteries10030110 · Cited by 45
Omnidirectional Printing of Soft Elastomer for Liquid-State Stretchable Electronics
Wang, J., Yang, S., Ding, P., Cao, X., Zhang, Y., Cao, S., Zhang, K., Kong, S., Zhou, Y., Wang, X., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b04730 · Cited by 45
3D printed transparent ceramic YAG laser rods: Matching the core-clad refractive index
Seeley, Z. M., Yee, T. D., Cherepy, N. J., Drobshoff, A., Herrera, O. D., Ryerson, R., & Payne, S. A. (2020) · Optical Materials · doi:10.1016/j.optmat.2020.110121 · Cited by 45
Ravichandran, D., Xu, W., Jambhulkar, S., Zhu, Y., Kakarla, M., Bawareth, M., & Song, K. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c12763 · Cited by 45
Design Aspects of Additive Manufacturing at Microscale: A Review
Rogkas, N., Vakouftsis, C., Spitas, V., Lagaros, N. D., & Georgantzinos, S. K. (2022) · Micromachines · doi:10.3390/mi13050775 · Cited by 45
Biobased and degradable thiol–ene networks from levoglucosan for sustainable 3D printing
Porwal, M. K., Hausladen, M. M., Ellison, C. J., & Reineke, T. M. (2023) · Green Chemistry · doi:10.1039/d2gc04185e · Cited by 45
Additive Manufacturing of Advanced Ceramics Using Preceramic Polymers
Han, J., Liu, C., Bradford-Vialva, R. L., Klosterman, D., & Cao, L. (2023) · Materials · doi:10.3390/ma16134636 · Cited by 44
3D Printing of Covalent Adaptable Networks: Overview, Applications and Future Prospects
Bijalwan, V., Rana, S., Yun, G. J., Singh, K. P., Jamil, M., & Schlögl, S. (2023) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2023.2227692 · Cited by 44
“[66] In comparison to FDM, DIW is superior since it requires less preparation and preprocessing of the polymer material before printing, although, both techniques produce parts with rough surface finish because of their layer-by-layer deposition and require high temperatures for their processing.”
MethodVapor-induced phase-separation-enabled versatile direct ink writing
Sole‐Gras, M., Ren, B. Y., Ryder, B. J., Ge, J., Huang, J., Chai, W., Yin, J., Fuchs, G. E., Wang, G., Jiang, X., et al. (2024) · Nature Communications · doi:10.1038/s41467-024-47452-9 · Cited by 44
“During DIW, the ink is usually dispensed through a nozzle in a controlled manner, following a prede fi ned path to conform structures in a layer-by-layer fashion 1 .”
Shashikumar, U., Saraswat, A., Deshmukh, K., Hussain, C. M., Chandra, P., Tsai, P., Huang, P., Chen, Y., Ke, L., Lin, Y., et al. (2024) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2024.103163 · Cited by 46
Román‐Manso, B., Moyano, J. J., Pérez-Coll, D., Belmonte, M., Miranzo, P., & Osendi, M. I. (2017) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2017.12.060 · Cited by 44
Fabricating 3D Structures by Combining 2D Printing and Relaxation of Strain
Cafferty, B. J., Campbell, V. E., Rothemund, P., Preston, D. J., Ainla, A., Fulleringer, N., Diaz, A. C., Fuentes, A. E., Sameoto, D., Lewis, J. A., et al. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201800299 · Cited by 44
Self-citationSaleh, M. S., Hu, C., Brenneman, J., Mutairi, A. M. A., & Panat, R. P. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.101856 · Cited by 44
Panraksa, P., Qi, S., Udomsom, S., Tipduangta, P., Rachtanapun, P., Jantanasakulwong, K., & Jantrawut, P. (2021) · Polymers · doi:10.3390/polym13203454 · Cited by 44
“The results of rheological studies showed that all printing formulations behaved as the non-Newtonian fluid and exhibited the shear-thinning (pseudoplastic) flow that is a desirable rheological property for extrusion-based 3D printing [32,33].”
BackgroundZhou, X., Ren, L., Liu, Q., Song, Z., Wu, Q., He, Y., Li, B., & Ren, L. (2021) · Macromolecular Bioscience · doi:10.1002/mabi.202100332 · Cited by 44
Direct Printing of Thermal Management Device Using Low‐Cost Composite Ink
Nguyen, N., Melamed, E., Park, J. G., Zhang, S., Hao, A., & Liang, R. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201700135 · Cited by 44
Printing single-walled carbon nanotube/Nafion composites by direct writing techniques
Luo, B., Chen, H., Zhu, Z., Xie, B., Bian, C., & Wang, Y. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.05.053 · Cited by 44
Direct Ink Writing 3D Printing Elastomeric Polyurethane Aided by Cellulose Nanofibrils
Yu, Z., Sun, X., Zhu, Y., Zhou, E., Cheng, C., Zhu, J., Yang, P., Zheng, D., Zhang, Y., Panahi‐Sarmad, M., et al. (2024) · ACS Nano · doi:10.1021/acsnano.4c07681 · Cited by 43
A Guiding Framework for Microextrusion Additive Manufacturing
Udofia, E. N., & Zhou, W. (2019) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4042607 · Cited by 43
Sun, Q., Liu, J., Cheng, H., Mou, Y., Liu, J., Peng, Y., & Chen, M. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.06.136 · Cited by 43
Li, W., Lan, D., & Wang, Y. (2020) · Microgravity Science and Technology · doi:10.1007/s12217-020-09820-0 · Cited by 44
“As a simple, fast and effective 3D printing method, the direct ink writing (DIW) technology can print a multitude of materials and construct arbitrary 3D structures through programmatically depositing fluid droplets on substrate surfaces (Lewis 2006; Lewis and Gratson 2004).”
Method3D Printable Soy/Silk Hybrid Hydrogels for Tissue Engineering Applications
Dorishetty, P., Balu, R., Gelmi, A. A., Mata, J. P., Dutta, N. K., & Choudhury, N. R. (2021) · Biomacromolecules · doi:10.1021/acs.biomac.1c00250 · Cited by 43
3D printing of solvent-treated PEDOT:PSS inks for electromagnetic interference shielding
Ghaderi, S., Hosseini, H., Haddadi, S. A., Kamkar, M., & Arjmand, M. (2023) · Journal of Materials Chemistry A · doi:10.1039/d3ta01021j · Cited by 43
Cardboard Machine Kit: Modules for the Rapid Prototyping of Rapid Prototyping Machines
Peek, N., Coleman, J., Moyer, I., & Gershenfeld, N. (2017) · CHI Conference on Human Factors in Computing Systems · doi:10.1145/3025453.3025491 · Cited by 43
“New materials for digital fabrication and methods for digital fabrication are regularly published [9, 25, 6, 21].”
MethodHe, H., Guan, L., & Ferrand, H. L. (2022) · Journal of Materials Chemistry A · doi:10.1039/d2ta01926d · Cited by 42
3D Printing for Energy Storage Devices: Advances, Challenges, and Future Directions
Kim, C., Ahn, B. Y., Cho, S., Jung, J., & Kim, I. (2025) · Advanced Materials · doi:10.1002/adma.202505943 · Cited by 42
Preparation of porous stainless steel hollow fibers by robotic fiber deposition
Michielsen, B., Chen, H., Jacobs, M., Middelkoop, V., Mullens, S., Thijs, I., Buekenhoudt, A., & Snijkers, F. M. M. (2013) · Journal of Membrane Science · doi:10.1016/j.memsci.2013.02.043 · Cited by 42
3D Printing of Hierarchical Porous Silica and α‐Quartz
Putz, F., Scherer, S., Ober, M., Morak, R., Paris, O., & Hüsing, N. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201800060 · Cited by 42
Additive Manufacturing of Polymer Matrix Composites
Yasa, E., & Ersoy, K. (2018) · InTech eBooks · doi:10.5772/intechopen.75628 · Cited by 42
3D printable, tough, magnetic hydrogels with programmed magnetization for fast actuation
Tang, J., Sun, B., Yin, Q., Yang, M., Hu, J. Q., & Wang, T. (2021) · Journal of Materials Chemistry B · doi:10.1039/d1tb01694f · Cited by 42
Progress on 3D‐Printed Metal‐Organic Frameworks with Hierarchical Structures
Lieu, W. Y., Fang, D., Tay, K. J., Li, X. L., Chu, W. C., Ang, Y. S., Li, D., Ang, L. K., Wang, Y., & Yang, H. Y. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202200023 · Cited by 42
Simple additive manufacturing of an osteoconductive ceramic using suspension melt extrusion
Slots, C., Jensen, M. B., Ditzel, N., Hedegaard, M. A. B., Borg, S. W., Albrektsen, O., Thygesen, T., Kassem, M. S., & Andersen, M. Ø. (2016) · Dental Materials · doi:10.1016/j.dental.2016.11.012 · Cited by 42
Photo-/thermo-responsive bioink for improved printability in extrusion-based bioprinting
Moon, S. H., Park, T. Y., Chi, H. J., & Yang, Y. J. (2024) · Materials Today Bio · doi:10.1016/j.mtbio.2024.100973 · Cited by 41
Direct ink writing of aerogels: Fundamentals, strategies, applications, and perspectives
Yang, J., Lu, J., Han, D., Zhou, B., & Du, A. (2025) · Progress in Materials Science · doi:10.1016/j.pmatsci.2025.101462 · Cited by 41
Spider-web inspired multi-resolution graphene tactile sensor
Liu, L., Huang, Y., Li, F., Ma, Y., Li, W., Su, M., Qian, X., Ren, W., Tang, K., & Song, Y. (2018) · Chemical Communications · doi:10.1039/c8cc02339e · Cited by 41
Wang, G., & Swan, J. W. (2019) · Soft Matter · doi:10.1039/c9sm00607a · Cited by 41
Xiong, H., Chen, H., Chen, Z., Xiong, X., Zhang, D., & Zhou, K. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.11.092 · Cited by 41
Additive manufacturing of graded B4C-Al cermets with complex shapes
Chandrasekaran, S., Lu, R., Landingham, R. L., Cahill, J. T., Thornley, L., Frane, W. L. D., Worsley, M. A., & Kuntz, J. D. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108516 · Cited by 41
Ebers, L.-S., & Laborie, M. G. (2020) · ACS Applied Bio Materials · doi:10.1021/acsabm.0c00800 · Cited by 41
Xiong, H., Zhao, L., Chen, H., Luo, H., Yuan, X., Zhou, K., & Zhang, D. (2020) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2020.09.059 · Cited by 41
Li, S., Li, Y., Wang, Q., Miao, K., Xue, L., Lu, Z., & Li, D. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.05.147 · Cited by 41
Greaves, M. D., Mende, M., Wang, J., Yang, W., & Barg, S. (2021) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/s43578-021-00282-7 · Cited by 41
A review on extrusion-based 3D-printed nanogenerators for energy harvesting
Wajahat, M., Kouzani, A. Z., Khoo, S., & Mahmud, M. A. P. (2022) · Journal of Materials Science · doi:10.1007/s10853-021-06637-z · Cited by 41
“AMT [34] 2006 Direct Ink Writing This work reports colloidal inks for DIW including ink design and rheology (✗) (✓) (✗) (✓) (✽) (✗)”
BackgroundGuo, J., Ji, P., Jiang, L., Lin, G., & Meng, Y. (2022) · Powder Technology · doi:10.1016/j.powtec.2022.117682 · Cited by 41
Development and Characterization of 3D Printable Thermite Component Materials
Durban, M. M., Golobic, A. M., Bukovsky, E. V., Gash, A. E., & Sullivan, K. T. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201800120 · Cited by 41
Sheikh, Z. A., Nayak, V. V., Daood, U., Kaur, A., Moussa, H., Canteenwala, A., Michaud, P.-L., Balderrama, Í. D. F., Sousa, E. D. O., Tovar, N., et al. (2024) · Journal of Functional Biomaterials · doi:10.3390/jfb15030060 · Cited by 41
“…involves the layer-by-layer creation of objects by extruding and depositing a water-based colloidal suspension (referred to as ink), which comprises a substantial amount of ceramic powder (usually exceeding 40%), employing a movable nozzle managed by a robotic deposition arm or gantry [189–191].”
BackgroundSilicon-photonics-enabled chip-based 3D printer
Corsetti, S., Notaros, M., Sneh, T., Stafford, A., Page, Z. A., & Notaroš, J. (2024) · Light Science & Applications · doi:10.1038/s41377-024-01478-2 · Cited by 40
“In FDM, parts are built layer by layer by heating and extruding thermoplastic fi laments 11,13 .”
Sullivan, K. T., Zhu, C. Y., Tanaka, D. J., Kuntz, J. D., Duoss, E. B., & Gash, A. E. (2012) · The Journal of Physical Chemistry B · doi:10.1021/jp306440t · Cited by 40
Chen, Z., Qian, X., Song, X., Jiang, Q., Huang, R., Yang, Y., Li, R., Shung, K. K., Chen, Y., & Zhou, Q. (2019) · Micromachines · doi:10.3390/mi10030170 · Cited by 40
Synthesis, Properties, and Applications of Graphene
Trivedi, S., Lobo, K., & Matte, H. S. S. R. (2019) · Elsevier eBooks · doi:10.1016/b978-0-08-102577-2.00003-8 · Cited by 40
Additive manufacturing and processing of architected materials
Spadaccini, C. M. (2019) · MRS Bulletin · doi:10.1557/mrs.2019.234 · Cited by 40
Additive Manufacturing of Micro-Electro-Mechanical Systems (MEMS)
Pasquale, G. D. (2021) · Micromachines · doi:10.3390/mi12111374 · Cited by 40
Direct Ink Writing of 3D Zn Structures as High‐Capacity Anodes for Rechargeable Alkaline Batteries
Zhu, C. Y., Schorr, N. B., Qi, Z., Wygant, B. R., Turney, D. E., Yadav, G. G., Worsley, M. A., Duoss, E. B., Banerjee, S., Spoerke, E. D., et al. (2022) · Small Structures · doi:10.1002/sstr.202200323 · Cited by 40
Associative Liquid‐In‐Liquid 3D Printing Techniques for Freeform Fabrication of Soft Matter
Honaryar, H., Amirfattahi, S., & Niroobakhsh, Z. (2023) · Small · doi:10.1002/smll.202206524 · Cited by 41
Viscoplastic lines: printing a single filament of yield stress material on a surface
van der Kolk, J., Tieman, D., & Jalaal, M. (2023) · Journal of Fluid Mechanics · doi:10.1017/jfm.2023.118 · Cited by 40
“Furthermore, viscoplastic fluids represent a large group of polymeric inks used in 3D printing [12, 19], where, depending on the application, the values of the ink’s yield stress varies [20– 26].”
BackgroundAbshirini, M., Marashizadeh, P., Saha, M. C., Altan, M. C., & Liu, Y. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c23331 · Cited by 40
Hossain, S. S., Son, H.-J., Park, S., & Bae, C. (2023) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2023.03.068 · Cited by 40
Yielding Behavior in Colloidal Glasses: Comparison between “Hard Cage” and “Soft Cage”
Zhou, Z. L., Hollingsworth, J. V., Hong, S. K., Cheng, H., & Han, C. C.-C. (2014) · Langmuir · doi:10.1021/la500866d · Cited by 40
3D Printing of Amylopectin‐Based Natural Fiber Composites
Jiang, Y., & Raney, J. R. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900521 · Cited by 40
Khoo, V., Ng, S., Haw, C. Y., & Ong, W. (2024) · Small · doi:10.1002/smll.202401278 · Cited by 39
Talley, S. J., Branch, B. A., Welch, C. F., Park, C. H., Watt, J. D., Kuettner, L. A., Patterson, B. M., Dattelbaum, D. M., & Lee, K. (2020) · Composites Science and Technology · doi:10.1016/j.compscitech.2020.108258 · Cited by 39
Ink‐Based Additive Nanomanufacturing of Functional Materials for Human‐Integrated Smart Wearables
Xu, S., & Wu, W. (2020) · Advanced Intelligent Systems · doi:10.1002/aisy.202000117 · Cited by 36
Challenges and Opportunities for Integrating Dealloying Methods into Additive Manufacturing
Chuang, A., & Erlebacher, J. (2020) · Materials · doi:10.3390/ma13173706 · Cited by 39
“DIW is relatively accessible compared to other AM methods and has been used to print functional devices such as piezo-composites with interpenetrating bicontinuous ferroelectric and polymer phases [69] and complex hybrid metallic structures for batteries and medical implants [70].”
MethodLiu, Z., & Zhang, M. (2021) · Future Foods · doi:10.1016/j.fufo.2021.100017 · Cited by 39
Engineering Natural Pollen Grains as Multifunctional 3D Printing Materials
Chen, S., Shi, Q., Jang, T., Ibrahim, M. S., Deng, J., Ferracci, G., Tan, W. S., Cho, N., & Song, J. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202106276 · Cited by 39
Additively manufactured electrodes for supercapacitors: A review
Jha, S., Velhal, M., Stewart, W., Amin, V., Wang, E., & Liang, H. Y. (2021) · Applied Materials Today · doi:10.1016/j.apmt.2021.101220 · Cited by 39
Gao, X., Liu, K., Su, C., Zhang, W., Dai, Y., Parkin, I. P., Carmalt, C. J., & He, G. (2023) · SmartMat · doi:10.1002/smm2.1197 · Cited by 39
“74 It has a wide range of applications and can be used with almost any kind of material, including ceramics, metals, polymers, nanomaterials, biomaterials, hydrogels, resins, conductive materials, and so forth.”
BackgroundThe use of thermal printing to control the properties of calcium phosphate deposits
Saber‐Samandari, S., & Gross, K.-A. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.05.012 · Cited by 39
“Hemispherical deposits are also found in simulated body fluid precipitated layers [29], ink-jet printed deposits [30] and thermally sprayed coatings [31,32].”
BackgroundUnconventional methods for forming nanopatterns
Stewart, M. E., Motala, M. J., Yao, J., Thompson, L. B., & Nuzzo, R. G. (2006) · Proceedings of the Institution of Mechanical Engineers Part N Journal of Nanoengineering and Nanosystems · doi:10.1243/17403499jnn103 · Cited by 39
Three-Dimensional Printed MoS2/Graphene Aerogel Electrodes for Hydrogen Evolution Reactions
Chandrasekaran, S., Feaster, J., Ynzunza, J., Li, F., Wang, X., Nelson, A. J., & Worsley, M. A. (2022) · ACS Materials Au · doi:10.1021/acsmaterialsau.2c00014 · Cited by 38
“25 − 28 Extrusion-based direct ink writing 22 (DIW) is a process in which an “ink” is extruded through a nozzle as directed by a computer-controlled stage.”
Rheology, 3D printing, and particle interactions of xanthan gum-clay binder for earth concrete
Maierdan, Y., Zhao, D., Chokshi, P. H., Garmonina, M., & Kawashima, S. (2024) · Cement and Concrete Research · doi:10.1016/j.cemconres.2024.107551 · Cited by 38
Mechanically‐Guided Deterministic Assembly of 3D Mesostructures Assisted by Residual Stresses
Fu, H., Nan, K., Froeter, P. J., Huang, W., Liu, Y., Wang, Y., Wang, J., Yan, Z., Luan, H., Guo, X., et al. (2017) · Small · doi:10.1002/smll.201700151 · Cited by 38
3D printing of alumina ceramic parts by heat-induced solidification with carrageenan
Yang, L., Zeng, X., & Zhang, Y. (2019) · Materials Letters · doi:10.1016/j.matlet.2019.126564 · Cited by 38
Functional applications of 4D printing: a review
Mohol, S. S., & Sharma, V. (2021) · Rapid Prototyping Journal · doi:10.1108/rpj-10-2020-0240 · Cited by 38
Baier, R. V., Raggio, J. I. C., Giovanetti, C. M., Palza, H., Burda, I., Terrasi, G. P., Weisse, B., Siqueira, G. D. F., Nyström, G., Vivanco, J. F., et al. (2021) · Biomaterials Advances · doi:10.1016/j.msec.2021.112540 · Cited by 39
Metadata
- Authors
- Lewis, J. A.
- Affiliations
- University of Illinois Urbana-Champaign (US)
- Corresponding author
- Lewis, J. A.
- ORCID
- Lewis, J. A.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2006-10-27
- Volume
- 16
- Issue
- 17
- Pages
- 2193-2204
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2143765114
- Cited by
- 1,740
- References
- 80
- Citations by year
- 2026: 153 · 2025: 150 · 2024: 145 · 2023: 180 · 2022: 183 · 2021: 202 · 2020: 154 · 2019: 161 · 2018: 115 · 2017: 78 · 2016: 53 · 2015: 38 · 2014: 28 · 2013: 19 · 2012: 26
- FWCI
- 17.02
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Functional Materials (publishedVersion)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Nanomaterials and Printing Technologies
- Keywords
- direct ink writing, 3D printing, additive manufacturing, 3D patterning, feature size reduction, composite materials, microfluidics, photonics, tissue engineering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.