Direct Ink Writing of 3D Functional Materials
The DOI matches its Crossref record; 81 of the 82 references it cites were found in a registry or an index, and 1 are not checked yet.
Abstract
The ability to pattern materials in three dimensions is critical for several technological applications, including composites, microfluidics, photonics, and tissue engineering. Direct‐write assembly allows one to design and rapidly fabricate materials in complex 3D shapes without the need for expensive tooling, dies, or lithographic masks. Here, recent advances in direct ink writing are reviewed with an emphasis on the push towards finer feature sizes. Opportunities and challenges associated with direct ink writing are also highlighted.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Inhibited Spontaneous Emission in Solid-State Physics and Electronics
Yablonovitch, E. (1987) · Physical Review Letters · doi:10.1103/physrevlett.58.2059 · Cited by 14,067
Fuzzy Nanoassemblies: Toward Layered Polymeric Multicomposites
Decher, G. (1997) · Science · doi:10.1126/science.277.5330.1232 · Cited by 10,054
Strong localization of photons in certain disordered dielectric superlattices
John, S. (1987) · Physical Review Letters · doi:10.1103/physrevlett.58.2486 · Cited by 10,029
Geometric Control of Cell Life and Death
Chen, C. S., Mrksich, M., Huang, S., Whitesides, G. M., & Ingber, D. E. (1997) · Science · doi:10.1126/science.276.5317.1425 · Cited by 4,657
Autonomic healing of polymer composites
White, S. R., Sottos, N. R., Geubelle, P. H., Moore, J. S., Kessler, M. R., Sriram, S. R., Brown, E. N., & Viswanathan, S. (2001) · Nature · doi:10.1038/35057232 · Cited by 4,575
Photonic crystals: putting a new twist on light
Joannopoulos, J. D., Villeneuve, P. R., & Fan, S. (1997) · Nature · doi:10.1038/386143a0 · Cited by 3,137
Tissue Engineering--Current Challenges and Expanding Opportunities
Griffith, L. G., & Naughton, G. (2002) · Science · doi:10.1126/science.1069210 · Cited by 2,343
Two-photon polymerization initiators for three-dimensional optical data storage and microfabrication
Cumpston, B. H., Ananthavel, S. P., Barlow, S., Dyer, D. L., Ehrlich, J. E., Erskine, L. L., Heikal, A. A., Kuebler, S. M., Lee, I.-Y. S., McCord-Maughon, D., et al. (1999) · Nature · doi:10.1038/17989 · Cited by 2,232
Functional hydrogel structures for autonomous flow control inside microfluidic channels
Beebe, D. J., Moore, J. S., Bauer, J. M., Yu, Q., Liu, R. H., Devadoss, C., & Jo, B.-H. (2000) · Nature · doi:10.1038/35007047 · Cited by 1,971
Fabrication of photonic crystals for the visible spectrum by holographic lithography
Campbell, M., Sharp, D. N., Harrison, M. T., Denning, R. G., & Turberfield, A. J. (2000) · Nature · doi:10.1038/35003523 · Cited by 1,675
Research works printed but not linked: 5
- Cesarano J., 1998, Ceram. Ind., 184, 94
- G. He D. A. Hirschfeld J. C. Cesarano III. inProc. of 24th Int. Conf. & Exposition on Engineering Ceramics and Structures The American Ceramic Society Westerville OH2000 Paper No. C‐071‐00.
- J.‐W. Choi C. H. Ahn inProc. of Microfluidic Devices and Systems III Santa Clara CA USA 4177 154 2000. SPIE. · doi:10.1117/12.395652
- S. W. Jones inChaos Applied to Fluid Mixing(Eds: H. Aref M. S. El Naschie) Pergamon Oxford UK1995 p. 185.
- Cha J. N., 2000, Nature, 403, 403
Cited by
Items 701–800 of 1,000
3D Printing of continuous fiber composites using two-stage UV curable resin
Jiang, H., Abdullah, A. M., Ding, Y., Chung, C., Dunn, M. L., & Yu, K. (2023) · Materials Horizons · doi:10.1039/d3mh01304a · Cited by 37
Hierarchically porous 3D-printed akermanite scaffolds from silicones and engineered fillers
Dasan, A., Elsayed, H., Kraxner, J., Galusek, D., & Bernardo, E. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2019.06.021 · Cited by 38
Zhang, Y., Li, F., Kong, X., Xue, T., Liu, D., Jia, P., Wang, L., Ding, L., Dong, H., Lu, D., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201907549 · Cited by 38
Towards a predictive understanding of direct ink writing of graphene-based inks
van Hazendonk, L. S., Vonk, C. F., van Grondelle, W., Vonk, N. H., & Friedrich, H. (2023) · Applied Materials Today · doi:10.1016/j.apmt.2023.102014 · Cited by 37
Mouraliraman, D., Thiagarajan, A., Deepa, S., Sriram, G., Aruchamy, K., Oh, T. H., & Shin, D. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2023.110395 · Cited by 37
Biodegradable Conducting Polymer-Based Composites for Biomedical Applications—A Review
Khan, T., Vadivel, G., Ramasamy, B., Murugesan, G., & Sebaey, T. A. (2024) · Polymers · doi:10.3390/polym16111533 · Cited by 37
“Reactive monomers, thermoplastic filaments, powder, and resin are frequently employed polymer types in additive manufacturing (AM) processes [116].”
BackgroundActive twisting for adaptive droplet collection
Yang, Y., Dai, Z., Chen, Y., & Xu, F. (2025) · Nature Computational Science · doi:10.1038/s43588-025-00786-w · Cited by 37
“Unraveling the underlying mechanism is key to precisely Article https://doi.org/10.1038/s43588-025-00786-w direct ink writing (DIW) technology 29 to fabricate the bilayer structures with designed arrangements (Fig.”
InfluentialWu, W., Wang, J., & Li, G. (2025) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2025.101071 · Cited by 37
Direct-writing of 3D periodic TiO2 bio-ceramic scaffolds with a sol-gel ink for in vitro cell growth
Wang, R., Zhu, P., Yang, W., Gao, S., Li, B., & Li, Q. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.02.040 · Cited by 38
Liu, J., Wang, P., He, Y., Liu, K., Miao, R., & Fang, Y. (2019) · Macromolecules · doi:10.1021/acs.macromol.8b02610 · Cited by 37
Direct 3D printing of graphene using capillary suspensions
Ding, H., Barg, S., & Derby, B. (2020) · Nanoscale · doi:10.1039/c9nr10831a · Cited by 37
Rheological and structural characterization of 3D-printable polymer electrolyte inks
Jackson, S., & Dickens, T. J. (2021) · Polymer Testing · doi:10.1016/j.polymertesting.2021.107377 · Cited by 37
Additive‐Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels
Rebber, M., Trommler, M., Lokteva, I., Ehteram, S., Schropp, A., König, S. G., Fröba, M., & Koziej, D. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202112914 · Cited by 37
Pottathara, Y. B., & Kokol, V. (2023) · Bioprinting · doi:10.1016/j.bprint.2023.e00266 · Cited by 37
Ying, S., Guizani, C., Grosseau, P., Chaussy, D., & Beneventi, D. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.05.035 · Cited by 37
Nath, S. S., Patil, I. G., & Sundriyal, P. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.110129 · Cited by 36
Lu, Y., Li, Z., Wang, X., Wang, Z., Li, M., Hu, X., Wang, Y., Liu, H., & Wang, Y. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.151523 · Cited by 36
Sekwele, K. G., Tichapondwa, S. M., & Mhike, W. (2024) · Discover Materials · doi:10.1007/s43939-024-00097-3 · Cited by 36
“Therefore, the development of high viscosity inks with shear-thinning behaviour that enables flow under pressure and pseudoplastic recovery after deposition is critical for the success of DIW [116, 117].”
Gillani, S. M. H., Mughal, A., KHAN, R. A., Nawaz, M. H., Razzaq, Z., Ismat, M. S., Hussain, R., Wadood, A., Ahmed, S., Minhas, B., et al. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.134528 · Cited by 36
Chan, C. H., Wong, H. H., Liang, S., Sun, M., Wu, T., Lu, Q., Lu, L., Chen, B., & Huang, B. (2024) · Batteries & Supercaps · doi:10.1002/batt.202400432 · Cited by 36
Microstructural evolution and failure in short fiber soft composites: Experiments and modeling
Mo, C., Jiang, Y., & Raney, J. R. (2020) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2020.103973 · Cited by 36
“As is typical for DIW processes ( Lewis, 2006; Raney and Lewis, 2015 ), the material is rheologically tuned to possess a viscoelastic yield stress, allowing it to flow freely through an extrusion nozzle but to hold its shape after extrusion (see rheological characterization for this material in our…”
MethodLorenzo‐Moldero, I., Chandra, A., Cavo, M., Mota, C., Kapsokalyvas, D., Gigli, G., Moroni, L., & del Mercato, L. L. (2020) · Small · doi:10.1002/smll.202002258 · Cited by 36
Xu, Z., Mao, Y., Zheng, D., Zhong, L., Wang, R., Gao, B., & Wang, D. (2021) · Journal of Materials Science · doi:10.1007/s10853-021-05869-3 · Cited by 36
Additive Manufacturing of Electrochemical Energy Storage Systems Electrodes
Soares, D. M., Ren, Z., Mujib, S. B., Mukherjee, S., Real, C. G., Anstine, M., Zanin, H., & Singh, G. (2021) · Advanced Energy and Sustainability Research · doi:10.1002/aesr.202000111 · Cited by 36
Microadditive Manufacturing Technologies of 3D Microelectromechanical Systems
Hassanin, H. S., Sheikholeslami, G., Sareh, P., & Ishaq, R. B. (2021) · Advanced Engineering Materials · doi:10.1002/adem.202100422 · Cited by 36
Wang, X., Ma, H., Peng, H., Wang, Y., Wang, G., Xiao, L., Lu, J., & Zhuang, L. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230636 · Cited by 36
3D printing of sponge spicules-inspired flexible bioceramic-based scaffolds
Yang, Z., Xue, J., Li, T., Zhai, D., Yu, X., Huan, Z., & Wu, C. (2022) · Biofabrication · doi:10.1088/1758-5090/ac66ff · Cited by 36
“It was noted that printing ink demonstrated shear thinning behavior and self-supporting ability, indicating the desirable printab-ility of ink [38].”
Wattanaanek, N., Suttapreyasri, S., & Samruajbenjakun, B. (2022) · Journal of Functional Biomaterials · doi:10.3390/jfb13020047 · Cited by 36
“In addition, direct ink writing is capable of multi-stack manufacturing and combining multi-materials [9].”
BackgroundBassyouni, Z., Allagui, A., & Ziki, J. D. A. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202200459 · Cited by 36
Hossain, S. S., Jang, S., Park, S., & Bae, C. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.02.018 · Cited by 36
Material extrusion of sodium polyacrylate superabsorbent polymer
Gosden, D., Studley, M., & Rossiter, J. M. (2023) · Additive manufacturing · doi:10.1016/j.addma.2023.103886 · Cited by 36
Three-Dimensional Printing of Hydrogels for Flexible Sensors: A Review
Khan, S. A., Ahmad, H., Zhu, G., Pang, H., & Zhang, Y. (2024) · Gels · doi:10.3390/gels10030187 · Cited by 36
“In this method, the materials are initially extruded through a nozzle using a mechanical force after which the deposited polymer solidifies via processes such as chemical crosslinking, recovery of noncovalent bonds, crystallization, or chain rearrangement [37].”
Direct ink writing of 3D conductive polyaniline structures and rheological modelling
Holness, F. B., & Price, A. D. (2017) · Smart Materials and Structures · doi:10.1088/1361-665x/aa981c · Cited by 36
House, A. A., Kuna, A., Hastings, D. L., Rodriguez, N., Schoenitz, M., Dreizin, E. L., & Güvendiren, M. (2023) · Progress in Additive Manufacturing · doi:10.1007/s40964-023-00422-x · Cited by 35
A multimaterial 3D printing-assisted micropatterning for heat dissipation applications
Jambhulkar, S., Ravichandran, D., Thippanna, V., Patil, D., & Song, K. (2023) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-023-00672-x · Cited by 35
“Different 3D printing approaches, such as stereolithography (SLA) [29–31], digital light processing (DLP) [32], volumetric printing [33], continuous liquid interface production (CLIP) [6, 34], fused deposition modeling (FDM) [35], direct laser writing (DLW) [36], direct ink writing (DIW) [37], electrohydrodynamic jett…”
BackgroundCheng, Y., Chen, Y., Gao, W., Kang, X., Sui, J. H., Yu, B., Guo, L., Zhao, M., Yuan, C., & Cui, B. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.127323 · Cited by 35
3D-printed electrodes for electrochemical detection of environmental analytes
Pan, L., Zhou, S., Yang, J., Fei, T., Mao, S., Fu, L., & Lin, C. (2025) · Analytical Methods · doi:10.1039/d4ay02271h · Cited by 36
Ionogels: From Properties and Synthesis to Toughening, Patterning, and Applications
Wang, M. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.5c00370 · Cited by 35
Metallic Nanoinks for Inkjet Printing of Conductive 2D and 3D Structures
Kamyshny, A. L., & Magdassi, S. (2017) · Wiley eBooks · doi:10.1002/9783527685790.ch7 · Cited by 35
Real Time Analysis of Bioanalytes in Healthcare, Food, Zoology and Botany
Wang, T., Ramnarayanan, A., & Cheng, H. (2017) · Sensors · doi:10.3390/s18010005 · Cited by 35
“, ink-deposition nozzle) to create patterns with a specific material composition and structural architecture (Figure 1c) [19].”
BackgroundCorner accuracy in direct ink writing with support material
Friedrich, L. M., & Begley, M. R. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00086 · Cited by 35
“Fused deposition modeling can be used to print viscous thermoplastics, while direct ink writing (DIW) can be used to print a diverse array of materials from low-viscosity inviscid biocompatible hydrogels[1] to viscous nanoclay-epoxy composites[2] to colloidal ceramic gels[3].”
MethodChemically Coupled Interfacial Adhesion in Multimaterial Printing of Hydrogels and Elastomers
Tian, K., Suo, Z., & Vlassak, J. J. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c07468 · Cited by 35
Direct ink writing of metal parts with curing by UV light irradiation
Wang, H., Chen, C., Yang, F., Shao, Y., & Guo, Z. (2021) · Materials Today Communications · doi:10.1016/j.mtcomm.2021.102037 · Cited by 35
Renteria, A., Garcia, L. F., Balcorta, V. H., Ortiz, D., Delfin, L. C., Regis, J. E., Marcos−Hernández, M., Espalin, D., Tseng, T.-L., & Lin, Y. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.03.171 · Cited by 35
Direct ink writing of boron carbide monoliths
Lakhdar, Y., Tuck, C. J., Terry, A., Spadaccini, C. M., & Goodridge, R. (2021) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2021.08.023 · Cited by 35
Lai, P., Ren, Z., & Yu, S. (2022) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c01508 · Cited by 35
Liao, M., Zhu, S., Guo, A., Han, X., Li, Q., Chen, Y., Liu, Y., Chen, D., Chen, X., Mo, S., et al. (2023) · Composites Part B Engineering · doi:10.1016/j.compositesb.2023.110582 · Cited by 35
Three-Dimensional Printing of Structural Color Using a Femtoliter Meniscus
Bae, J., Yoo, C., Kim, S., Ahn, J., Sim, H. H., Kim, J. H., Kim, J., Yoon, S.-Y., Kim, J. T., Seol, S. K., et al. (2023) · ACS Nano · doi:10.1021/acsnano.3c02236 · Cited by 35
Growing three-dimensional objects with light
Lipkowitz, G., Saccone, M. A., Panzer, M. A., Coates, I. A., Hsiao, K., Ilyn, D., Kronenfeld, J. M., Tumbleston, J. R., Shaqfeh, E. S. G., & DeSimone, J. M. (2024) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2303648121 · Cited by 35
Catenary shape evolution of spanning structures in direct-write assembly of colloidal gels
Zhu, C. Y., & Smay, J. E. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2011.04.005 · Cited by 35
Flexural elasticity of woodpile lattice beams
Cuan‐Urquizo, E., & Bhaskar, A. (2017) · European Journal of Mechanics - A/Solids · doi:10.1016/j.euromechsol.2017.09.008 · Cited by 35
“This arrangement of matter is easy to fabricate using additive manufacturing and is found in a number of applications such as catalyst immobilization structures [1, 2], photonic crystals [3, 4, 5], lattice filters in ferrous casting [6] and tissue engineering scaffolds [7, 8, 9].”
MethodFunctional 3D Printed Polymeric Materials
Ortiz‐Acosta, D., & Moore, T. (2019) · IntechOpen eBooks · doi:10.5772/intechopen.80686 · Cited by 35
Biomedical Silicones: Leveraging Additive Strategies to Propel Modern Utility
Marmo, A. C., & Grunlan, M. A. (2023) · ACS Macro Letters · doi:10.1021/acsmacrolett.2c00701 · Cited by 35
From materials to clinical use: advances in 3D-printed scaffolds for cartilage tissue engineering
Zhang, H., Wang, M., Wu, R., Guo, J., Sun, A., Li, Z., Ye, R., Xu, G. J., & Cheng, Y. (2023) · Physical Chemistry Chemical Physics · doi:10.1039/d3cp00921a · Cited by 34
Polysiloxane Inks for Multimaterial 3d Printing of High‐Permittivity Dielectric Elastomers
Danner, P. M., Pleij, T., Siqueira, G. D. F., Bayles, A. V., Venkatesan, T. R., Vermant, J., & Opris, D. M. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202313167 · Cited by 35
Chen, J., Jin, D., Wang, Q., & Ma, X. (2024) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2024.08.049 · Cited by 34
Fan, J., Xu, S., Newell, B., Garcia-Bravo, J. M., Wu, W., & Nawrocki, R. A. (2025) · Nano Energy · doi:10.1016/j.nanoen.2025.110820 · Cited by 34
Origami Robots: Design, Actuation, and 3D Printing Methods
Xue, W., Jian, B., Jin, L., Wang, R., & Ge, Q. (2025) · Advanced Materials Technologies · doi:10.1002/admt.202500278 · Cited by 34
Fluid Mechanics Challenges in Direct-Ink-Writing Additive Manufacturing
Sauret, A., Ray, T. R., & Compton, B. G. (2025) · Annual Review of Fluid Mechanics · doi:10.1146/annurev-fluid-100224-111013 · Cited by 34
Emerging polymeric materials in additive manufacturing for use in biomedical applications
Gladman, A. S., García‐Leiner, M., & Sauer-Budge, A. F. (2019) · AIMS bioengineering · doi:10.3934/bioeng.2019.1.1 · Cited by 34
“…2) deposition-on-demand processes which include extrusion-based technologies, such as Fused Deposition Modeling (FDM) and direct ink-write printing [12], and inkjet or drop-wise deposition methods, and 3) photopolymer-based printing methods, such as stereolithography (SLA) and Continuous Liquid…”
Advances and innovations in electrospinning technology
Davoodi, P., Gill, E., Wang, W., & Huang, Y. Y. S. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-822476-2.00004-2 · Cited by 34
Flexible 3D printed silicones for gamma and neutron radiation shielding
Talley, S. J., Robison, T., Long, A., Lee, S. Y., Brounstein, Z., Lee, K., Geller, D., Lum, E. S., & Labouriau, A. (2021) · Radiation Physics and Chemistry · doi:10.1016/j.radphyschem.2021.109616 · Cited by 34
Yu, P., Qi, L., Guo, Z., Lin, S., Liu, Y., & Zhao, J. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.110388 · Cited by 34
3D Printing Enables Customizable Batteries
Shi, H., Cao, J., Sun, Z., Ghazi, Z. A., Zhu, X., Han, S. R., Ren, D., Lu, G., Lan, H., & Li, F. (2023) · Batteries & Supercaps · doi:10.1002/batt.202300161 · Cited by 35
Lantada, A. D., Sánchez, B. P., Murillo, C. G., & Sotillo, J. U. (2013) · Expert Review of Medical Devices · doi:10.1586/17434440.2013.827506 · Cited by 34
Kim, E., & Baek, J. (2012) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/j.jnnfm.2012.02.005 · Cited by 34
Robocasting of carbon-alumina core-shell composites using co-extrusion
Fu, Z., Freihart, M., Schlordt, T., Fey, T., Kraft, T., Greil, P., & Travitzky, N. A. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-12-2015-0191 · Cited by 34
Manning, K. B., Wyatt, N. B., Hughes, L. G., Cook, A., Giron, N. H., Martinez, E. J., Campbell, C. G., & Celina, M. C. (2018) · Macromolecular Materials and Engineering · doi:10.1002/mame.201800511 · Cited by 34
3D printing of in-situ curing thermally insulated thermosets
Wang, B., Arias, K. F., Zhang, Z., Liu, Y., Jiang, Z., Sue, H., Currie, N. J., Bouslog, S., Pei, Z., & Wang, S. (2019) · Manufacturing Letters · doi:10.1016/j.mfglet.2019.06.001 · Cited by 35
“DIW can continuously print thermosetting polymer ink layer-by-layer through a micro-nozzle, and allow it to solidify to create complex structures [6,7].”
BackgroundBio‐Inspired Functional Materials for Environmental Applications
Ede, S. R., Yu, H., Sung, C. H., & Kisailus, D. (2023) · Small Methods · doi:10.1002/smtd.202301227 · Cited by 33
A general simulation-based study on printability of inks in direct ink writing
Sourov, M. A., Emu, S. I., Thakur, M. S. H., Ikram, M. M., Morshed, A. K. M. M., & Rahman, M. M. (2025) · Scientific Reports · doi:10.1038/s41598-024-74058-4 · Cited by 33
Dynamic regimes of electrified liquid filaments
Kong, T., Stone, H. A., Wang, L., & Shum, H. C. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1801053115 · Cited by 33
Processing of dense bioinspired ceramics with deliberate microstructure
Ferrand, H. L., & Bouville, F. (2019) · Journal of the American Ceramic Society · doi:10.1111/jace.16656 · Cited by 33
Scalable Alignment and Selective Deposition of Nanoparticles for Multifunctional Sensor Applications
Jambhulkar, S., Xu, W., Ravichandran, D., Prakash, J., Kannan, A. M., & Song, K. (2020) · Nano Letters · doi:10.1021/acs.nanolett.9b05245 · Cited by 33
Shockwave dissipation by interface-dominated porous structures
Dattelbaum, D. M., Ioniţă, A., Patterson, B. M., Branch, B. A., & Kuettner, L. A. (2020) · AIP Advances · doi:10.1063/5.0015179 · Cited by 33
Optimized preceramic polymer for 3D structured ceramics via fused deposition modeling
Zhao, L., Wang, X., Xiong, H., Zhou, K., & Zhang, D. (2021) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2021.03.061 · Cited by 33
A 3D-printed neuromorphic humanoid hand for grasping unknown objects
Bao, C., Kim, T., Kalhori, A. H., & Kim, W. S. (2022) · iScience · doi:10.1016/j.isci.2022.104119 · Cited by 33
“Among these, the DIW method for paste printing has attracted significant attention for the preparation of functional materials (Dong et al., 2018; Kim et al., 2019; Lewis, 2006; Valentine et al., 2017; Zhang et al., 2019; Zhou et al., 2017).”
MethodAbshirini, M., Saha, M. C., Altan, M. C., & Liu, Y. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202101555 · Cited by 33
Rahman, A. M., Bhardwaj, A., Pei, Z., Ufodike, C. O., & Castell-Perez, E. M. (2022) · Journal of Composites Science · doi:10.3390/jcs6080237 · Cited by 33
Chen, Q., Tian, E., Wang, Y., Mo, J., Xu, G., & Zhu, M. (2023) · Small Methods · doi:10.1002/smtd.202201302 · Cited by 33
Lorenz, M., Dietemann, B., Wahl, L., Bierwisch, C., Kraft, T., Kruggel‐Emden, H., & Travitzky, N. A. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2019.10.044 · Cited by 33
3D Printing Lithium Salt towards Dendrite-free Lithium Anodes
Shen, K. B., Cao, Z., Shi, Y., Zhang, Y., Li, B., & Yang, S. (2020) · Energy storage materials · doi:10.1016/j.ensm.2020.11.022 · Cited by 33
Wang, Z., Zhang, Z., & Kuang, X. (2025) · Smart Materials in Medicine · doi:10.1016/j.smaim.2025.09.001 · Cited by 32
CMOS-compatible biosensor for L-carnitine detection
Andrianova, M. S., Kuznetsov, E. V., Grudtsov, V. P., & Kuznetsov, A. E. (2018) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2018.07.044 · Cited by 32
Xu, J., Zhang, X., Liu, Y., Zhang, Y., Nie, H.-Y., Zhang, G., & Gao, W. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101487 · Cited by 32
“In the experiments, such as deposition velocity, pressure, nozzle effect and wettability would influence the width of the printed PDMS shell [37,66,67].”
MethodAmr, M. M., Dykes, I., Counts, M., Kernan, J., Mallah, A. H., Mendenhall, J., Wie, B. V., Abu‐Lail, N. I., & Gozen, B. A. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00133 · Cited by 33
3D Printed CO2‐Based Triblock Copolymers and Post‐Printing Modification
Wei, P., Bhat, G. A., Cipriani, C. E., Mohammad, H., Schoonover, K. G., Pentzer, E., & Darensbourg, D. J. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202208355 · Cited by 32
Ecofriendly Polymer–Graphene‐Based Conductive Ink for Multifunctional Printed Electronics
Joshi, S. R., Kumar, S., & Kim, S. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202201917 · Cited by 32
Extrusion parameter control optimization for DIW 3D printing using image analysis techniques
Sevcik, M. J., Bjerke, G., Wilson, F., Kline, D. J., Morales, R. C., Fletcher, H. E., Guan, K. M., Grapes, M. D., Sridhar, S., Sullivan, K. T., et al. (2023) · Progress in Additive Manufacturing · doi:10.1007/s40964-023-00470-3 · Cited by 32
“Many of the inks that have been developed for DIW have low relaxation rates, so that the printed structure can maintain its shape over the duration of the print [1, 7, 21].”
High-strength, lightweight nano-architected silica
Michelson, A. N., Flanagan, T. J., Lee, S., & Gang, O. (2023) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2023.101475 · Cited by 32
Chemical and topographical patterning of hydrogels for neural cell guidance in vitro
Turunen, S., Haaparanta, A., Äänismaa, R., & Kellomäki, M. (2011) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.520 · Cited by 32
Ugarteburu, A. E., & Casanova, I. (2018) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2017.0164 · Cited by 32
“Different DIW techniques include micropen writing, robocasting, ink-jet printing, and hot-melt printing.(4) Duoss et al.”
3D printing of kaolinite clay with small additions of lime, fly ash and talc ceramic powders
Revelo, C. F., & Colorado, H. A. (2019) · Processing and Application of Ceramics · doi:10.2298/pac1903287r · Cited by 32
“casting [14,15], solid freeform fabrication (SFF) [16], 3D printing (3DP) [17], selective laser sintering (SLS) [18], extrusion freeforming (EFF) [19], stereolithography (SLA) [20] and laminated object manufacturing (LOM) [21].”
Direct ink writing of flexible electronic circuits and their characterization
Abas, M., Khalid, Q. S., Khan, A. M., & Rahman, K. (2019) · Journal of the Brazilian Society of Mechanical Sciences and Engineering · doi:10.1007/s40430-019-2066-3 · Cited by 32
Yang, Y., Wang, B., Li, J., Wang, J., Wang, K., Wang, Y., Niu, S., Li, X., & Xu, X. (2024) · Ceramics International · doi:10.1016/j.ceramint.2024.10.385 · Cited by 31
3D Interconnected Boron Nitride Macrostructures and Derived Composites for Thermal Energy Regulation
Maqbool, M., Bashir, A., Ali, U., Khurram, M., Aftab, W., Li, Y., & Zou, R. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202414042 · Cited by 31
Hybrid Formative‐Additive Manufacturing
Brown, N. C., & Mueller, J. (2025) · Advanced Materials · doi:10.1002/adma.202417609 · Cited by 31
Functional Metallic Microcomponents via Liquid-Phase Multiphoton Direct Laser Writing: A Review
Waller, E. H., Dix, S., Gutsche, J., Widera, A., & von Freymann, G. (2019) · Micromachines · doi:10.3390/mi10120827 · Cited by 31
“Not surprisingly, some additive manufacturing technologies have been developed that try to occupy this zone: direct ink writing (DIW, extrusion of metal particle inks, [2]), electrohydrodynamic printing (EHD, electrohydrodynamic ejection of droplets [3]), laser-assisted electrophoretic deposition (LAED, electrophoreti…”
BackgroundVadillo, J., Larraza, I., Calvo‐Correas, T., Gabilondo, N., Dérail, C., & Eceiza, A. (2021) · Cellulose · doi:10.1007/s10570-021-03826-6 · Cited by 31
“Additionally, some authors claimed that anisotropic nanoentities such as CNC can be aligned during extrusion using DIW (Lewis 2006; Feilden et al. 2017; Siqueira et al. 2017), expecting an enhancement of the mechanical properties of the final printed piece.”
BackgroundInfluentialBrooks, S. L., Cartwright, Z., Merckle, D., & Weems, A. C. (2021) · Polymer Composites · doi:10.1002/pc.26211 · Cited by 31
Metadata
- Authors
- Lewis, J. A.
- Affiliations
- University of Illinois Urbana-Champaign (US)
- Corresponding author
- Lewis, J. A.
- ORCID
- Lewis, J. A.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2006-10-27
- Volume
- 16
- Issue
- 17
- Pages
- 2193-2204
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2143765114
- Cited by
- 1,740
- References
- 80
- Citations by year
- 2026: 153 · 2025: 150 · 2024: 145 · 2023: 180 · 2022: 183 · 2021: 202 · 2020: 154 · 2019: 161 · 2018: 115 · 2017: 78 · 2016: 53 · 2015: 38 · 2014: 28 · 2013: 19 · 2012: 26
- FWCI
- 17.02
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Functional Materials (publishedVersion)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Nanomaterials and Printing Technologies
- Keywords
- direct ink writing, 3D printing, additive manufacturing, 3D patterning, feature size reduction, composite materials, microfluidics, photonics, tissue engineering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.