Direct Ink Writing of 3D Functional Materials
The DOI matches its Crossref record; 81 of the 82 references it cites were found in a registry or an index, and 1 are not checked yet.
Abstract
The ability to pattern materials in three dimensions is critical for several technological applications, including composites, microfluidics, photonics, and tissue engineering. Direct‐write assembly allows one to design and rapidly fabricate materials in complex 3D shapes without the need for expensive tooling, dies, or lithographic masks. Here, recent advances in direct ink writing are reviewed with an emphasis on the push towards finer feature sizes. Opportunities and challenges associated with direct ink writing are also highlighted.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Inhibited Spontaneous Emission in Solid-State Physics and Electronics
Yablonovitch, E. (1987) · Physical Review Letters · doi:10.1103/physrevlett.58.2059 · Cited by 14,067
Fuzzy Nanoassemblies: Toward Layered Polymeric Multicomposites
Decher, G. (1997) · Science · doi:10.1126/science.277.5330.1232 · Cited by 10,054
Strong localization of photons in certain disordered dielectric superlattices
John, S. (1987) · Physical Review Letters · doi:10.1103/physrevlett.58.2486 · Cited by 10,029
Geometric Control of Cell Life and Death
Chen, C. S., Mrksich, M., Huang, S., Whitesides, G. M., & Ingber, D. E. (1997) · Science · doi:10.1126/science.276.5317.1425 · Cited by 4,657
Autonomic healing of polymer composites
White, S. R., Sottos, N. R., Geubelle, P. H., Moore, J. S., Kessler, M. R., Sriram, S. R., Brown, E. N., & Viswanathan, S. (2001) · Nature · doi:10.1038/35057232 · Cited by 4,575
Photonic crystals: putting a new twist on light
Joannopoulos, J. D., Villeneuve, P. R., & Fan, S. (1997) · Nature · doi:10.1038/386143a0 · Cited by 3,137
Tissue Engineering--Current Challenges and Expanding Opportunities
Griffith, L. G., & Naughton, G. (2002) · Science · doi:10.1126/science.1069210 · Cited by 2,343
Two-photon polymerization initiators for three-dimensional optical data storage and microfabrication
Cumpston, B. H., Ananthavel, S. P., Barlow, S., Dyer, D. L., Ehrlich, J. E., Erskine, L. L., Heikal, A. A., Kuebler, S. M., Lee, I.-Y. S., McCord-Maughon, D., et al. (1999) · Nature · doi:10.1038/17989 · Cited by 2,232
Functional hydrogel structures for autonomous flow control inside microfluidic channels
Beebe, D. J., Moore, J. S., Bauer, J. M., Yu, Q., Liu, R. H., Devadoss, C., & Jo, B.-H. (2000) · Nature · doi:10.1038/35007047 · Cited by 1,971
Fabrication of photonic crystals for the visible spectrum by holographic lithography
Campbell, M., Sharp, D. N., Harrison, M. T., Denning, R. G., & Turberfield, A. J. (2000) · Nature · doi:10.1038/35003523 · Cited by 1,675
Research works printed but not linked: 5
- Cesarano J., 1998, Ceram. Ind., 184, 94
- G. He D. A. Hirschfeld J. C. Cesarano III. inProc. of 24th Int. Conf. & Exposition on Engineering Ceramics and Structures The American Ceramic Society Westerville OH2000 Paper No. C‐071‐00.
- J.‐W. Choi C. H. Ahn inProc. of Microfluidic Devices and Systems III Santa Clara CA USA 4177 154 2000. SPIE. · doi:10.1117/12.395652
- S. W. Jones inChaos Applied to Fluid Mixing(Eds: H. Aref M. S. El Naschie) Pergamon Oxford UK1995 p. 185.
- Cha J. N., 2000, Nature, 403, 403
Cited by
Items 201–300 of 1,000
Architected Polymer Foams via Direct Bubble Writing
Visser, C. W., Amato, D. N., Mueller, J., & Lewis, J. A. (2019) · Advanced Materials · doi:10.1002/adma.201904668 · Cited by 162
Self-citationJiang, B., Jiao, H., Guo, X., Chen, G., Guo, J., Wu, W., Jin, Y., Cao, G., & Liang, Z. (2023) · Advanced Science · doi:10.1002/advs.202206055 · Cited by 165
Current and emerging trends in polymeric 3D printed microfluidic devices
Gonzalez, G., Roppolo, I., Pirri, C. F., & Chiappone, A. (2022) · Additive Manufacturing · doi:10.1016/j.addma.2022.102867 · Cited by 160
Liu, Z., Bhandari, B., & Zhang, M. (2019) · Food Research International · doi:10.1016/j.foodres.2019.108795 · Cited by 160
Wearable solar thermoelectric generator driven by unprecedentedly high temperature difference
Jung, Y. S., Jeong, D. H., Kang, S. B., Kim, F., Jeong, M. H., Lee, K., Son, J. S., Baik, J. M., Kim, J.-S., & Choi, K. J. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.08.061 · Cited by 159
3D printing of SiC ceramic: Direct ink writing with a solution of preceramic polymers
Chen, H., Wang, X., Xue, F., Huang, Y., Zhou, K., & Zhang, D. (2018) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.08.009 · Cited by 159
Lei, C., Xie, Z., Wu, K., & Fu, Q. (2021) · Advanced Materials · doi:10.1002/adma.202103495 · Cited by 159
4D Printing of Multi‐Stimuli Responsive Protein‐Based Hydrogels for Autonomous Shape Transformations
Narupai, B., Smith, P. T., & Nelson, A. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202011012 · Cited by 158
Freeform drop-on-demand laser printing of 3D alginate and cellular constructs
Xiong, R., Zhang, Z., Chai, W., Huang, Y., & Chrisey, D. B. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045011 · Cited by 158
Colombo, P. (2008) · Science · doi:10.1126/science.1162962 · Cited by 158
3D printing of a multifunctional nanocomposite helical liquid sensor
Guo, S., Yang, X., Heuzey, M.-C., & Therriault, D. (2015) · Nanoscale · doi:10.1039/c5nr00278h · Cited by 158
Direct ink writing of three-dimensional thermoelectric microarchitectures
Kim, F., Yang, S. E., Ju, H., Choo, S., Lee, J., Kim, G., Jung, S., Kim, S., Cha, C., Kim, K. T., et al. (2021) · Nature Electronics · doi:10.1038/s41928-021-00622-9 · Cited by 158
Computational design for 4D printing of topology optimized multi-material active composites
Athinarayanarao, D., Prod’hon, R., Chamoret, D., Qi, H. J., Bodaghi, M., André, J., & Demoly, F. (2023) · npj Computational Materials · doi:10.1038/s41524-022-00962-w · Cited by 158
“…technology in 4D printing in terms of manufactur-ability allows the accurate arrangement of different materials in a single part, especially with material extrusion (i.e., fused fi lament fabrication 20 , direct ink writing 21 – 25 ) and material jetting 26 (i.e., PolyJet technique).”
Method3-dimensional (3D) fabricated polymer based drug delivery systems
Moulton, S. E., & Wallace, G. G. (2014) · Journal of Controlled Release · doi:10.1016/j.jconrel.2014.07.005 · Cited by 156
4D Printing of Liquid Crystals: What's Right for Me?
del Pozo, M., Sol, J. A. H. P., Schenning, A. P. H. J., & Debije, M. G. (2021) · Advanced Materials · doi:10.1002/adma.202104390 · Cited by 156
Geometrically Complex Silicon Carbide Structures Fabricated by Robocasting
Cai, K., Román‐Manso, B., Smay, J., Zhou, J. P., Osendi, M. I., Belmonte, M., & Miranzo, P. (2012) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2012.05276.x · Cited by 155
Chemistry from 3D printed objects
Hartings, M. R., & Ahmed, Z. (2019) · Nature Reviews Chemistry · doi:10.1038/s41570-019-0097-z · Cited by 156
Kong, Y. L., Gupta, M. K., Johnson, B. N., & McAlpine, M. C. (2016) · Nano Today · doi:10.1016/j.nantod.2016.04.007 · Cited by 147
Printing Flexible and Hybrid Electronics for Human Skin and Eye‐Interfaced Health Monitoring Systems
Kim, K., Kim, B., & Lee, C. H. (2020) · Advanced Materials · doi:10.1002/adma.201902051 · Cited by 147
3D printing for oral drug delivery: a new tool to customize drug delivery
Pandey, M., Choudhury, H., Fern, J. L. C., Kee, A. T. K., Kou, J., Jing, J. L. J., Her, H. C., Yong, H. S., Ming, H. C., Bhattamisra, S. K., et al. (2020) · Drug Delivery and Translational Research · doi:10.1007/s13346-020-00737-0 · Cited by 152
“Several ink designs that can be utilized in this technique include dilute fluids, polymer melts, colloidal suspensions, and gels, which can be hardened to form solids by various methods like liquid evaporation and gelation [38].”
MethodHassan, K., Nine, M. J., Tùng, T. T., Stanley, N., Yap, P. L., Rastin, H., Yu, L., & Lošić, D. (2020) · Nanoscale · doi:10.1039/d0nr04933f · Cited by 153
Recent advances in 3D printing of nanocellulose: structure, preparation, and application prospects
Ee, L. Y., & Li, S. F. Y. (2021) · Nanoscale Advances · doi:10.1039/d0na00408a · Cited by 154
Recent advances in 3D printing with protein-based inks
Mu, X., Agostinacchio, F., Xiang, N., Pei, Y., Khan, Y., Guo, C., Cebe, P., Motta, A., & Kaplan, D. L. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101375 · Cited by 138
Ma, T., Lv, L., Ouyang, C., Hu, X., Liao, X., Song, Y., & Hu, X. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.117217 · Cited by 151
Ma, J., Wang, P., Chen, H., Bao, S., Chen, W., & Lu, H. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b20902 · Cited by 150
Robotic Hands with Intrinsic Tactile Sensing via 3D Printed Soft Pressure Sensors
Ntagios, M., Nassar, H., Pullanchiyodan, A., Navaraj, W. T., & Dahiya, R. (2019) · Advanced Intelligent Systems · doi:10.1002/aisy.201900080 · Cited by 149
3D Printed Neural Regeneration Devices
Joung, D., Lavoie, N., Guo, S., Park, S. H., Parr, A. M., & McAlpine, M. C. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201906237 · Cited by 153
Cheng, M., Deivanayagam, R., & Shahbazian‐Yassar, R. (2020) · Batteries & Supercaps · doi:10.1002/batt.201900130 · Cited by 149
Foam 3D printing for construction: A review of applications, materials, and processes
Bedarf, P., Dutto, A., Zanini, M., & Dillenburger, B. (2021) · Automation in Construction · doi:10.1016/j.autcon.2021.103861 · Cited by 149
“The resolution of extrusion based 3DP is determined by the filament size and its ability to retain its shape [73].”
BackgroundDirect Ink Writing of Materials for Electronics-Related Applications: A Mini Review
Hou, Z., Lu, H., Li, Y., Yang, L., & Gao, Y. (2021) · Frontiers in Materials · doi:10.3389/fmats.2021.647229 · Cited by 148
“This can avoid, as far as possible, the changes of volume and shape of the printed object during the following treatment (Lewis, 2006; Tian et al., 2017).”
BackgroundHe, Y., Chen, S., Nie, L., Sun, Z.-T., Wu, X., & Liu, W. (2020) · Nano Letters · doi:10.1021/acs.nanolett.0c02457 · Cited by 147
Additive Manufacturing Technologies: 3D Printing in Organic Synthesis
Rossi, S., Puglisi, A., & Benaglia, M. (2017) · ChemCatChem · doi:10.1002/cctc.201701619 · Cited by 146
Room temperature 3D printing of super-soft and solvent-free elastomers
Xie, R., Mukherjee, S., Levi, A. E., Reynolds, V. G., Wang, H., Chabinyc, M. L., & Bates, C. M. (2020) · Science Advances · doi:10.1126/sciadv.abc6900 · Cited by 147
“DIW involves the extrusion of material from a nozzle that can be dynamically positioned along three coordinate axes (16).”
3D printing of extremely viscous materials using ultrasonic vibrations
Gunduz, I. E., McClain, M. S., Cattani, P. A., Chiu, G. T. ‐., Rhoads, J. F., & Son, S. F. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.04.029 · Cited by 145
Multimaterial extrusion 3D printing printheads
Brown, N. C., Ames, D. C., & Mueller, J. (2025) · Nature Reviews Materials · doi:10.1038/s41578-025-00809-y · Cited by 147
“For example, expanding DIW printheads to processes such as FFF would further enhance their applicability and accessibility, as FFF remains the most widely used and accessible 3D printing method for hobbyists, students and professionals alike.”
InfluentialFunctional Dyes in Polymeric 3D Printing: Applications and Perspectives
Gastaldi, M., Cardano, F., Zanetti, M., Viscardi, G., Barolo, C., Bordiga, S., Magdassi, S., Fin, A., & Roppolo, I. (2020) · ACS Materials Letters · doi:10.1021/acsmaterialslett.0c00455 · Cited by 144
Micro‐Engineered 3D Scaffolds for Cell Culture Studies
Greiner, A. M., Richter, B., & Bastmeyer, M. (2012) · Macromolecular Bioscience · doi:10.1002/mabi.201200132 · Cited by 143
Li, W., Li, Y., Su, M., An, B., Liu, J., Su, D., Li, L., Li, F., & Song, Y. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02041d · Cited by 142
The status, barriers, challenges, and future in design for 4D printing
Demoly, F., Dunn, M. L., Wood, K. L., Qi, H. J., & André, J. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.110193 · Cited by 143
Divakaran, N. C., Das, J. P., Ajay Kumar, P., V, Mohanty, S., Ramadoss, A., & NAYAK, S. K. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2022.01.002 · Cited by 141
Ng, W. L., An, J., & Chua, C. K. (2024) · Engineering · doi:10.1016/j.eng.2024.01.028 · Cited by 141
3D-Printing of Pure Metal–Organic Framework Monoliths
Lim, G. J. H., Wu, Y., Shah, B. B., Koh, J. J., Liu, C. K., Zhao, D., Cheetham, A. K., Wang, J., & Ding, J. (2019) · ACS Materials Letters · doi:10.1021/acsmaterialslett.9b00069 · Cited by 140
3D Printed Micro‐Electrochemical Energy Storage Devices: From Design to Integration
Zhang, W., Liu, H., Zhang, X., Li, X., Zhang, G., & Cao, P. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202104909 · Cited by 139
3D printed electrically-driven soft actuators
Haghiashtiani, G., Habtour, E., Park, S. H., Gardea, F., & McAlpine, M. C. (2018) · Extreme Mechanics Letters · doi:10.1016/j.eml.2018.02.002 · Cited by 138
“The shear thinning behavior facilitates the flow of the ink materials through the deposition nozzle due to a decrease in the viscosity under the imposed shear rates during the printing process, while sustaining the shape of the printed inks after deposition onto the substrate [23].”
BackgroundMaurel, A., Armand, M. B., Grugeon, S., Fleutot, B., Davoisne, C., Tortajada, H., Courty, M., Panier, S., & Dupont, L. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab7c38 · Cited by 138
Guo, B., Liang, G., Yu, S., Wang, Y., Zhi, C., & Bai, J. (2021) · Energy storage materials · doi:10.1016/j.ensm.2021.04.021 · Cited by 138
Review of High-Performance Sustainable Polymers in Additive Manufacturing
Chyr, G., & DeSimone, J. M. (2023) · Green Chemistry · doi:10.1039/d2gc03474c · Cited by 136
Printing Hydrogels and Elastomers in Arbitrary Sequence with Strong Adhesion
Yang, H., Li, C., Yang, M., Pan, Y., Yin, Q., Tang, J., Qi, H. J., & Suo, Z. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901721 · Cited by 136
Review of 4D printing materials and reinforced composites: Behaviors, applications and challenges
Alshahrani, H. (2021) · Journal of Science Advanced Materials and Devices · doi:10.1016/j.jsamd.2021.03.006 · Cited by 134
Shape-morphing composites with designed micro-architectures
Rodriguez, J. N., Zhu, C., Duoss, E. B., Wilson, T. S., Spadaccini, C. M., & Lewicki, J. P. (2016) · Scientific Reports · doi:10.1038/srep27933 · Cited by 133
Additive manufacturing of structural ceramics: a historical perspective
Pelz, J. S., Ku, N., Meyers, M. A., & Vargas‐Gonzalez, L. R. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.07.155 · Cited by 133
“or in droplets, and self-supports via gelation, cooling, UVcuring, or other rheological effects [125].”
BackgroundJiang, P., Yan, C., Guo, Y., Zhang, X., Cai, M., Jia, X., Wang, X., & Zhou, F. (2019) · Biomaterials Science · doi:10.1039/c9bm00081j · Cited by 131
Hierarchically porous monolithic MOFs: An ongoing challenge for industrial-scale effluent treatment
Lorignon, F., Gossard, A., & Carboni, M. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124765 · Cited by 130
“The paste (ink) is extruded layer-bylayer though a syringe at moderate or ambient temperature [37].”
BackgroundDas, S., Pati, F., Chameettachal, S., Pahwa, S., Ray, A. R., Dhara, S., & Ghosh, S. (2013) · Biomacromolecules · doi:10.1021/bm301193t · Cited by 124
Additive manufacturing with stimuli-responsive materials
Boydston, A. J., Cao, B., Nelson, A., Ono, R. J., Saha, A., Schwartz, J. J., & Thrasher, C. J. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta07716a · Cited by 127
Freeform, Reconfigurable Embedded Printing of All‐Aqueous 3D Architectures
Luo, G., Yu, Y., Yuan, Y., Chen, X., Liu, Z., & Kong, T. (2019) · Advanced Materials · doi:10.1002/adma.201904631 · Cited by 128
Layer-by-Layer Growth of Complex-Shaped Three-Dimensional Nanostructures with Focused Electron Beams
Skorić, L., Sanz‐Hernández, D., Meng, F., Donnelly, C., Merino-Aceituno, S., & Fernández‐Pacheco, A. (2019) · Nano Letters · doi:10.1021/acs.nanolett.9b03565 · Cited by 128
Roy, N. K., Behera, D., Dibua, O. G., Foong, C. S., & Cullinan, M. A. (2019) · Microsystems & Nanoengineering · doi:10.1038/s41378-019-0116-8 · Cited by 128
Luo, C., Chung, C., Traugutt, N. A., Yakacki, C. M., Long, K., & Yu, K. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c17538 · Cited by 128
Processes and materials used for direct writing technologies: A review
Balani, S. B., Ghaffar, S. H., Chougan, M., Pei, E., & Şahin, E. (2021) · Results in Engineering · doi:10.1016/j.rineng.2021.100257 · Cited by 128
3D printing dendrite-free lithium anodes based on the nucleated MXene arrays
Shen, K. B., Li, B., & Yang, S. (2019) · Energy storage materials · doi:10.1016/j.ensm.2019.08.015 · Cited by 126
Parupelli, S. K., & Desai, S. S. (2019) · American Journal of Applied Sciences · doi:10.3844/ajassp.2019.244.272 · Cited by 127
3D printed self-supporting elastomeric structures for multifunctional microfluidics
Su, R., Wen, J., Su, Q., Wiederoder, M. S., Koester, S. J., Uzarski, J. R., & McAlpine, M. C. (2020) · Science Advances · doi:10.1126/sciadv.abc9846 · Cited by 126
“Extrusion-based 3D printing provides a freeform method to fabricate objects via the conformal deposition of filaments onto target surfaces (13).”
Method4D polycarbonates via stereolithography as scaffolds for soft tissue repair
Weems, A. C., Arno, M. C., Wei, Y., Huckstepp, R. T. R., & Dove, A. P. (2021) · Nature Communications · doi:10.1038/s41467-021-23956-6 · Cited by 126
Performance enhancement of graphene/GO/rGO based supercapacitors: A comparative review
Malik, M. T. U., Sarker, A., Rahat, S. M. S. M., & Shuchi, S. B. (2021) · Materials Today Communications · doi:10.1016/j.mtcomm.2021.102685 · Cited by 126
3D printing of micro-nano devices and their applications
Zhang, N., Wang, Z., Zhao, Z., Zhang, D., Feng, J., Yu, L., Lin, Z., Guo, Q., Huang, J., Mao, J., et al. (2025) · Microsystems & Nanoengineering · doi:10.1038/s41378-024-00812-3 · Cited by 126
“Notably, direct ink writing (DIW) is a 3D printing technology that is very similar to IP, except that it allows printing of solid-liquid mixed materials 27 .”
Sintering of micro-trusses created by extrusion-3D-printing of lunar regolith inks
Taylor, S. L., Jakus, A. E., Koube, K. D., Ibeh, A. J., Geisendorfer, N. R., Shah, R. N., & Dunand, D. C. (2018) · Acta Astronautica · doi:10.1016/j.actaastro.2017.11.005 · Cited by 125
“Similar 3D printing platforms involving the extrusion of liquid particle-containing inks can also be used to produce metals and alloys [35–40], ceramics and ceramic-based composites [41–44], electronic materials [45,46], materials for bone regeneration and tissue engineering [45,47,48], and graphene for tissue enginee…”
BackgroundFlexible Circuits and Soft Actuators by Printing Assembly of Graphene
Li, W., Li, F., Li, H., Su, M., Gao, M., Li, Y., Su, D., Zhang, X., & Song, Y. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b04235 · Cited by 124
Elastic Vector Solitons in Soft Architected Materials
Deng, B., Raney, J. R., Tournat, V., & Bertoldi, K. (2017) · Physical Review Letters · doi:10.1103/physrevlett.118.204102 · Cited by 123
Nanomaterials for treating cardiovascular diseases: A review
Jiang, W., Rutherford, D., Vuong, T., & Liu, H. H. (2017) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.11.002 · Cited by 123
“First, direct writing can fabricate diverse micro fl uidic systems that mimic microvascular networks in the body [61,62], which was thoroughly reviewed previously [63].”
BackgroundAdvanced Material Strategies for Next-Generation Additive Manufacturing
Chang, J., He, J., Mao, M., Zhou, W., Lei, Q., Li, X., Li, D., Chua, C.-K., & Zhao, X. (2018) · Materials · doi:10.3390/ma11010166 · Cited by 104
“Micro-/nano-scale 3D printing techniques used for the fabrication of conductive features mainly include material jetting, material extrusion [18], and electrohydrodynamic (EHD) printing [19].”
Method3D Printed Organ Models for Surgical Applications
Qiu, K., Haghiashtiani, G., & McAlpine, M. C. (2018) · Annual Review of Analytical Chemistry · doi:10.1146/annurev-anchem-061417-125935 · Cited by 125
Direct Ink Writing of Conductive Hydrogels
Ho, M., Ramirez, A. B., Akbarnia, N., Croiset, E., Prince, E., Fuller, G. G., & Kamkar, M. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202415507 · Cited by 123
Zocca, A., Franchin, G., Elsayed, H., Gioffredi, E., Bernardo, E., & Colombo, P. (2016) · Journal of the American Ceramic Society · doi:10.1111/jace.14213 · Cited by 123
Printed thermoelectric materials and devices: Fabrication techniques, advantages, and challenges
Orrill, M., & LeBlanc, S. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.44256 · Cited by 122
Ren, L., Wang, Z., Ren, L., Han, Z., Liu, Q., & Song, Z. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.110086 · Cited by 123
Basis Task Approach to Iterative Learning Control With Applications to Micro-Robotic Deposition
Hoelzle, D. J., Alleyne, A. G., & Johnson, A. J. W. (2010) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2010.2063030 · Cited by 121
“These properties allow the fabrication of porous structures without the use of lost molds, making well suited for applications such as artificial bone scaffolds, piezoelectric actuators, micro-fluidic networks, and photonic bandgap structures [13].”
BackgroundPrinting mesoscale architectures
Raney, J. R., & Lewis, J. A. (2015) · MRS Bulletin · doi:10.1557/mrs.2015.235 · Cited by 120
Self-citationGuo, S., Heuzey, M.-C., & Therriault, D. (2014) · Langmuir · doi:10.1021/la4036425 · Cited by 120
Three‐dimensional printing of graphene‐based materials for energy storage and conversion
Jiang, Y., Guo, F., Liu, Y., Xu, Z. Y., & Gao, C. (2021) · SusMat · doi:10.1002/sus2.27 · Cited by 119
Robocasting of alumina hollow filament lattice structures
Schlordt, T., Schwanke, S., Keppner, F., Fey, T., Travitzky, N. A., & Greil, P. (2013) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2013.06.001 · Cited by 118
Direct-write assembly of silicate and borate bioactive glass scaffolds for bone repair
Deliormanlı, A. M., & Rahaman, M. N. (2012) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2012.05.005 · Cited by 119
Biomedical Applications of Metal 3D Printing
Velásquez–García, L. F., & Kornbluth, Y. (2021) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-082020-032402 · Cited by 118
A systematic printability study of direct ink writing towards high-resolution rapid manufacturing
Zheng, Q., Xie, B., Xu, Z., & Wu, H. (2023) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/acd090 · Cited by 119
“The three-zone velocity profile must be considered when considering the rheology of the ink: (1) a thin sliding layer on the inner wall of the nozzle (figure 1(d, i)); (2) surrounded by a yielded (fluid state, velocity v= v(r)) shell experiencing laminar flow (figure 1(d, ii)); and (3) a constant-velocity unyielded (g…”
BackgroundJang, S., Boddorff, A. K., Jang, D. J., Lloyd, J., Wagner, K. B., Thadhani, N. N., & Brettmann, B. K. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102313 · Cited by 117
Printing thermoelectric inks toward next-generation energy and thermal devices
Zeng, M., Zavanelli, D., Chen, J., Saeidi‐Javash, M., Du, Y., LeBlanc, S., Snyder, G. J., & Zhang, Y. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00490e · Cited by 117
Bone Tissue Engineering through 3D Bioprinting of Bioceramic Scaffolds: A Review and Update
Khalaf, A. T., Wei, Y., Wan, J., Zhu, J., Peng, Y., Kadir, S. Y. A., Zainol, J., Oglah, Z., Cheng, L., & Shi, Z. (2022) · Life · doi:10.3390/life12060903 · Cited by 118
“The printing paste used in DIW technology needs to have the characteristics of shear-thinning, and it needs to maintain a three-dimensional shape after being extruded without collapsing [81].”
MethodMahshid, R., Isfahani, M. N., Heidari‐Rarani, M., & Mirkhalaf, M. (2023) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2023.107584 · Cited by 116
Charles, A. D. M., Rider, A. N., Brown, S. A., & Wang, C. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100705 · Cited by 115
Insights into the Role of Hydrogen Bonds on the Mechanical Properties of Polymer Networks
Huang, X. H., Nakagawa, S., Houjou, H., & Yoshie, N. (2021) · Macromolecules · doi:10.1021/acs.macromol.1c00120 · Cited by 115
Bio-inspired self-shaping ceramics
Bargardi, F. L., Ferrand, H. L., Libanori, R., & Studart, A. R. (2016) · Nature Communications · doi:10.1038/ncomms13912 · Cited by 115
“Processing of ceramic components exhibiting intricate geometries generally involves top–down fabrication technologies such as injection molding 3 , in situ coagulation or gelation 4–6 , machining of pressed powder compacts 7,8 or additive manufacturing techniques 9 .”
Direct-write 3D printing of NdFeB bonded magnets
Compton, B. G., Kemp, J. W., Novikov, T. V., Pack, R. C., Nlebedim, C. I., Duty, C., Rios, O. R., & Paranthaman, M. P. (2016) · Materials and Manufacturing Processes · doi:10.1080/10426914.2016.1221097 · Cited by 114
“Specifically, direct-write AM technology, which employs rheologically-tailored viscoelastic “inks,” affords a vast potential for new structural and functional feedstock materials coupled with new novel print heads to impart novel architecture or functionality [11-15].”
BackgroundRecent advances in direct ink writing of electronic components and functional devices
Jiang, P., Ji, Z., Zhang, X., Liu, Z., & Wang, X. (2017) · Progress in Additive Manufacturing · doi:10.1007/s40964-017-0035-x · Cited by 114
Chen, K., Zhang, L., Kuang, X., Li, V., Lei, M., Kang, G., Wang, Z. L., & Qi, H. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201903568 · Cited by 115
Wang, Y., Ahmed, A., Azam, A., Bing, D., Zhang, S., Zhang, Z., Tariq, M. K., Sultana, J., Mushtaq, R. T., Mehboob, A., et al. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.07.023 · Cited by 114
“causes a pattern-generating device or ink-deposition nozzle to move [144].”
Ananth, K. P., & Jayram, N. D. (2023) · Annals of 3D Printed Medicine · doi:10.1016/j.stlm.2023.100141 · Cited by 114
Peng, Y., & Unluer, C. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.110492 · Cited by 113
Zhu, H., Yang, H., Ma, Y., Lu, T. J., Xu, F., Genin, G. M., & Lin, M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000639 · Cited by 113
Low Solids Emulsion Gels Based on Nanocellulose for 3D-Printing
Huan, S., Ajdary, R., Bai, L., Klar, V., & Rojas, O. J. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b01224 · Cited by 111
Metals by Micro‐Scale Additive Manufacturing: Comparison of Microstructure and Mechanical Properties
Reiser, A., Koch, L., Dunn, K. A., Matsuura, T., Iwata, F., Fogel, O., Kotler, Z., Zhou, N., Charipar, K. M., Piqué, A., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910491 · Cited by 111
Metadata
- Authors
- Lewis, J. A.
- Affiliations
- University of Illinois Urbana-Champaign (US)
- Corresponding author
- Lewis, J. A.
- ORCID
- Lewis, J. A.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2006-10-27
- Volume
- 16
- Issue
- 17
- Pages
- 2193-2204
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2143765114
- Cited by
- 1,740
- References
- 80
- Citations by year
- 2026: 153 · 2025: 150 · 2024: 145 · 2023: 180 · 2022: 183 · 2021: 202 · 2020: 154 · 2019: 161 · 2018: 115 · 2017: 78 · 2016: 53 · 2015: 38 · 2014: 28 · 2013: 19 · 2012: 26
- FWCI
- 17.02
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Functional Materials (publishedVersion)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Nanomaterials and Printing Technologies
- Keywords
- direct ink writing, 3D printing, additive manufacturing, 3D patterning, feature size reduction, composite materials, microfluidics, photonics, tissue engineering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.