Direct Ink Writing of 3D Functional Materials
The DOI matches its Crossref record; 81 of the 82 references it cites were found in a registry or an index, and 1 are not checked yet.
Abstract
The ability to pattern materials in three dimensions is critical for several technological applications, including composites, microfluidics, photonics, and tissue engineering. Direct‐write assembly allows one to design and rapidly fabricate materials in complex 3D shapes without the need for expensive tooling, dies, or lithographic masks. Here, recent advances in direct ink writing are reviewed with an emphasis on the push towards finer feature sizes. Opportunities and challenges associated with direct ink writing are also highlighted.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Inhibited Spontaneous Emission in Solid-State Physics and Electronics
Yablonovitch, E. (1987) · Physical Review Letters · doi:10.1103/physrevlett.58.2059 · Cited by 14,067
Fuzzy Nanoassemblies: Toward Layered Polymeric Multicomposites
Decher, G. (1997) · Science · doi:10.1126/science.277.5330.1232 · Cited by 10,054
Strong localization of photons in certain disordered dielectric superlattices
John, S. (1987) · Physical Review Letters · doi:10.1103/physrevlett.58.2486 · Cited by 10,029
Geometric Control of Cell Life and Death
Chen, C. S., Mrksich, M., Huang, S., Whitesides, G. M., & Ingber, D. E. (1997) · Science · doi:10.1126/science.276.5317.1425 · Cited by 4,657
Autonomic healing of polymer composites
White, S. R., Sottos, N. R., Geubelle, P. H., Moore, J. S., Kessler, M. R., Sriram, S. R., Brown, E. N., & Viswanathan, S. (2001) · Nature · doi:10.1038/35057232 · Cited by 4,575
Photonic crystals: putting a new twist on light
Joannopoulos, J. D., Villeneuve, P. R., & Fan, S. (1997) · Nature · doi:10.1038/386143a0 · Cited by 3,137
Tissue Engineering--Current Challenges and Expanding Opportunities
Griffith, L. G., & Naughton, G. (2002) · Science · doi:10.1126/science.1069210 · Cited by 2,343
Two-photon polymerization initiators for three-dimensional optical data storage and microfabrication
Cumpston, B. H., Ananthavel, S. P., Barlow, S., Dyer, D. L., Ehrlich, J. E., Erskine, L. L., Heikal, A. A., Kuebler, S. M., Lee, I.-Y. S., McCord-Maughon, D., et al. (1999) · Nature · doi:10.1038/17989 · Cited by 2,232
Functional hydrogel structures for autonomous flow control inside microfluidic channels
Beebe, D. J., Moore, J. S., Bauer, J. M., Yu, Q., Liu, R. H., Devadoss, C., & Jo, B.-H. (2000) · Nature · doi:10.1038/35007047 · Cited by 1,971
Fabrication of photonic crystals for the visible spectrum by holographic lithography
Campbell, M., Sharp, D. N., Harrison, M. T., Denning, R. G., & Turberfield, A. J. (2000) · Nature · doi:10.1038/35003523 · Cited by 1,675
Research works printed but not linked: 5
- Cesarano J., 1998, Ceram. Ind., 184, 94
- G. He D. A. Hirschfeld J. C. Cesarano III. inProc. of 24th Int. Conf. & Exposition on Engineering Ceramics and Structures The American Ceramic Society Westerville OH2000 Paper No. C‐071‐00.
- J.‐W. Choi C. H. Ahn inProc. of Microfluidic Devices and Systems III Santa Clara CA USA 4177 154 2000. SPIE. · doi:10.1117/12.395652
- S. W. Jones inChaos Applied to Fluid Mixing(Eds: H. Aref M. S. El Naschie) Pergamon Oxford UK1995 p. 185.
- Cha J. N., 2000, Nature, 403, 403
Cited by
Bioinspired structural materials
Wegst, U. G. K., Bai, H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2015) · Nature Materials · doi:10.1038/nmat4089 · Cited by 4,721
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Self-citationPrinting ferromagnetic domains for untethered fast-transforming soft materials
Kim, Y., Yuk, H., Zhao, R., Chester, S. A., & Zhao, X. (2018) · Nature · doi:10.1038/s41586-018-0185-0 · Cited by 2,183
“The fumed silica within the silicone resin serves as a rheological modifier to induce mechanical properties required for direct ink writing 3,16 including shear thinning ( Extended Data Fig.”
Printing soft matter in three dimensions
Truby, R. L., & Lewis, J. A. (2016) · Nature · doi:10.1038/nature21003 · Cited by 1,622
Self-citationIlievski, F., Mazzeo, A. D., Shepherd, R. F., Chen, X., & Whitesides, G. M. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201006464 · Cited by 1,381
3D Printing of Interdigitated Li‐Ion Microbattery Architectures
Sun, K., Wei, T., Ahn, B. Y., Seo, J. Y., Dillon, S. J., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201301036 · Cited by 1,341
Self-citationDirect Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
Momeni, F., M.Mehdi Hassani.N, S., Liu, X., & Ni, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.068 · Cited by 1,165
Highly compressible 3D periodic graphene aerogel microlattices
Zhu, C., Han, T. Y.-J., Duoss, E. B., Golobic, A. M., Kuntz, J. D., Spadaccini, C. M., & Worsley, M. A. (2015) · Nature Communications · doi:10.1038/ncomms7962 · Cited by 1,148
“Although a number of ceramic, metallic, polymeric and even graphene–polymer composite ink materials 43,46,47 have been developed to fabricate various complex 3D structures, there is no example using this technique to create 3D periodic graphene aerogel macro-architectures.”
Additive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities
Zocca, A., Colombo, P., Gomes, C. M., & Günster, J. (2015) · Journal of the American Ceramic Society · doi:10.1111/jace.13700 · Cited by 1,115
Multistable Architected Materials for Trapping Elastic Strain Energy
Shan, S., Kang, S. H., Raney, J. R., Wang, P., Fang, L., Candido, F., Lewis, J. A., & Bertoldi, K. (2015) · Advanced Materials · doi:10.1002/adma.201501708 · Cited by 986
Self-citationMechanical Metamaterials and Their Engineering Applications
Surjadi, J. U., Gao, L., Du, H., Li, X., Xiong, X., Fang, N. X., & Lu, Y. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201800864 · Cited by 982
3D printing of soft robotic systems
Wallin, T. J., Pikul, J., & Shepherd, R. F. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0002-2 · Cited by 942
3D Printing of Free Standing Liquid Metal Microstructures
Ladd, C., So, J., Muth, J., & Dickey, M. D. (2013) · Advanced Materials · doi:10.1002/adma.201301400 · Cited by 926
Magnetic Soft Materials and Robots
Kim, Y., & Zhao, X. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00481 · Cited by 873
Instrumented cardiac microphysiological devices via multimaterial three-dimensional printing
Lind, J. U., Busbee, T. A., Valentine, A. D., Pasqualini, F. S., Yuan, H., Yadid, M., Park, S.-J., Kotikian, A., Nesmith, A. P., Campbell, P. H., et al. (2017) · Nature Materials · doi:10.1038/nmat4782 · Cited by 863
“materials to be patterned and integrated in a single programmable manufacturing step [10-14].”
Self-citation3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
Additive manufacturing of advanced ceramic materials
Lakhdar, Y., Tuck, C., Binner, J., Terry, A., & Goodridge, R. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100736 · Cited by 857
Hierarchical 3D electrodes for electrochemical energy storage
Sun, H., Zhu, J., Baumann, D., Peng, L., Xu, Y., Shakir, I., Huang, Y., & Duan, X. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0069-9 · Cited by 805
Direct writing by way of melt electrospinning
Brown, T. D., Dalton, P. D., & Hutmacher, D. W. (2011) · Advanced Materials · doi:10.1002/adma.201103482 · Cited by 800
Recent Progress on Polymer Materials for Additive Manufacturing
Tan, L. J., Zhu, W., & Zhou, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003062 · Cited by 740
Supercapacitors Based on Three-Dimensional Hierarchical Graphene Aerogels with Periodic Macropores
Zhu, C., Liu, T., Qian, F., Han, T. Y.-J., Duoss, E. B., Kuntz, J. D., Spadaccini, C. M., Worsley, M. A., & Li, Y. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04965 · Cited by 720
A Review of 3D Printing Technologies for Soft Polymer Materials
Zhou, L., Fu, J., & He, Y. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000187 · Cited by 713
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
Jungst, T., Smolan, W., Schacht, K., Scheibel, T., & Groll, J. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00303 · Cited by 712
Additive manufacturing of structural materials
Liu, G., Zhang, X., Chen, X., He, Y., Cheng, L., Huo, M., Yin, J., Hao, F., Chen, S., Wang, P., et al. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100596 · Cited by 707
Ilievski, F., Mazzeo, A. D., Shepherd, R. F., Chen, X., & Whitesides, G. M. (2011) · Angewandte Chemie · doi:10.1002/ange.201006464 · Cited by 665
3D biofabrication strategies for tissue engineering and regenerative medicine
Bajaj, P., Schweller, R. M., Khademhosseini, A., West, J. L., & Bashir, R. (2014) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-071813-105155 · Cited by 632
“In extrusion bioprinting, or direct ink write (DIW), a stage, or surface, is moved in a directed fashion (generally by computer), controlling the spatial deposition of the bioink from a nozzle to create materials of predetermined architecture (98).”
BackgroundIntegrated 3D-printed reactionware for chemical synthesis and analysis
Symes, M. D., Kitson, P. J., Yan, J., Richmond, C. J., Cooper, G. J. T., Bowman, R. W., Vilbrandt, T., & Cronin, L. (2012) · Nature Chemistry · doi:10.1038/nchem.1313 · Cited by 617
Current and emerging applications of 3D printing in medicine
Liaw, C.-Y., & Guvendiren, M. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7279 · Cited by 604
Chen, L.-Y., Liang, S.-X., Liu, Y., & Zhang, L.-C. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100648 · Cited by 603
Synthesis and alignment of liquid crystalline elastomers
Herbert, K. M., Fowler, H. E., McCracken, J. M., Schlafmann, K. R., Koch, J. A., & White, T. J. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00359-z · Cited by 600
González-Henríquez, C. M., Sarabia-Vallejos, M. A., & Rodriguez-Hernandez, J. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.03.001 · Cited by 562
3D printing of polymer composites: Materials, processes, and applications
Park, S., Shou, W., Makatura, L., Matusik, W., & Fu, K. (. (2022) · Matter · doi:10.1016/j.matt.2021.10.018 · Cited by 562
3D Graphene Materials: From Understanding to Design and Synthesis Control
Sun, Z., Fang, S., & Hu, Y. H. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00083 · Cited by 543
A mechanically driven form of Kirigami as a route to 3D mesostructures in micro/nanomembranes
Zhang, Y., Yan, Z., Nan, K., Xiao, D., Liu, Y., Luan, H., Fu, H., Wang, X., Yang, Q., Wang, J., et al. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1515602112 · Cited by 535
Liu, Z., Bhandari, B., Prakash, S., Mantihal, S., & Zhang, M. (2019) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2018.08.026 · Cited by 530
3D Printing of Emulsions and Foams into Hierarchical Porous Ceramics
Minas, C., Carnelli, D., Tervoort, E., & Studart, A. R. (2016) · Advanced Materials · doi:10.1002/adma.201603390 · Cited by 507
Wei, H., Zhang, Q., Yao, Y., Liu, L., Liu, Y., & Leng, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b12824 · Cited by 504
Printed supercapacitors: materials, printing and applications
Zhang, Y.-Z., Wang, Y., Cheng, T., Yao, L.-Q., Li, X., Lai, W.-Y., & Huang, W. (2019) · Chemical Society Reviews · doi:10.1039/c7cs00819h · Cited by 497
3D printing technologies for electrochemical energy storage
Zhang, F., Wei, M., Viswanathan, V. V., Swart, B., Shao, Y., Wu, G., & Zhou, C. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.08.037 · Cited by 494
Graphene-based wearable piezoresistive physical sensors
Zheng, Q., Lee, J.-H., Shen, X., Chen, X., & Kim, J.-K. (2020) · Materials Today · doi:10.1016/j.mattod.2019.12.004 · Cited by 486
3D Printing of Freestanding MXene Architectures for Current‐Collector‐Free Supercapacitors
Yang, W., Yang, J., Byun, J. J., Moissinac, F. P., Xu, J., Haigh, S. J., Domingos, M., Bissett, M. A., Dryfe, R. A. W., & Barg, S. (2019) · Advanced Materials · doi:10.1002/adma.201902725 · Cited by 460
Orangi, J., Hamade, F., Davis, V. A., & Beidaghi, M. (2020) · ACS Nano · doi:10.1021/acsnano.9b07325 · Cited by 443
3D Printed Quantum Dot Light-Emitting Diodes
Kong, Y. L., Tamargo, I. A., Kim, H., Johnson, B. N., Gupta, M. K., Koh, T.-W., Chin, H.-A., Steingart, D. A., Rand, B. P., & McAlpine, M. C. (2014) · Nano Letters · doi:10.1021/nl5033292 · Cited by 432
3D printing for soft robotics – a review
Gul, J. Z., Sajid, M., Rehman, M. M., Siddiqui, G. U., Shah, I., Kim, K.-H., Lee, J.-W., & Choi, K. H. (2018) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2018.1431862 · Cited by 428
3D printing of bacteria into functional complex materials
Schaffner, M., Rühs, P. A., Coulter, F., Kilcher, S., & Studart, A. R. (2017) · Science Advances · doi:10.1126/sciadv.aao6804 · Cited by 425
“To benefit from the inherent freedom of shape provided by 3D printing (34, 35), the rheological properties of the hydrogel ink have to be designed to ensure the additive deposition of distortion-free and accurate 3D structures.”
Additive manufacturing of biologically-inspired materials
Studart, A. R. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00836k · Cited by 415
Extrusion 3D Printing of Polymeric Materials with Advanced Properties
Jiang, Z., Diggle, B., Tan, M. L., Viktorova, J., Bennett, C. W., & Connal, L. A. (2020) · Advanced Science · doi:10.1002/advs.202001379 · Cited by 408
Emerging 3D‐Printed Electrochemical Energy Storage Devices: A Critical Review
Tian, X., Jin, J., Yuan, S., Chua, C. K., Tor, S. B., & Zhou, K. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700127 · Cited by 407
Magnetically assisted slip casting of bioinspired heterogeneous composites
Le Ferrand, H., Bouville, F., Niebel, T. P., & Studart, A. R. (2015) · Nature Materials · doi:10.1038/nmat4419 · Cited by 400
Additive Manufacturing of Metal Structures at the Micrometer Scale
Hirt, L., Reiser, A., Spolenak, R., & Zambelli, T. (2017) · Advanced Materials · doi:10.1002/adma.201604211 · Cited by 400
3D Printing of Multifunctional Hydrogels
Chen, Z., Zhao, D., Liu, B., Nian, G., Li, X., Yin, J., Qu, S., & Yang, W. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900971 · Cited by 398
Stable propagation of mechanical signals in soft media using stored elastic energy
Raney, J. R., Nadkarni, N., Daraio, C., Kochmann, D. M., Lewis, J. A., & Bertoldi, K. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1604838113 · Cited by 397
“1A) are fabricated with high fidelity using direct ink writing, an extrusion-based 3D printing method (23).”
MethodSelf-citation3D printed functional nanomaterials for electrochemical energy storage
Zhu, C., Liu, T., Qian, F., Chen, W., Chandrasekaran, S., Yao, B., Song, Y., Duoss, E. B., Kuntz, J. D., Spadaccini, C. M., et al. (2017) · Nano Today · doi:10.1016/j.nantod.2017.06.007 · Cited by 394
Roohani-Esfahani, S.-I., Newman, P., & Zreiqat, H. (2016) · Scientific Reports · doi:10.1038/srep19468 · Cited by 380
One-step volumetric additive manufacturing of complex polymer structures
Shusteff, M., Browar, A. E. M., Kelly, B. E., Henriksson, J., Weisgraber, T. H., Panas, R. M., Fang, N. X., & Spadaccini, C. M. (2017) · Science Advances · doi:10.1126/sciadv.aao5496 · Cited by 375
“Extrusion-based filamentmethods such as direct inkwriting (DIW) (5), directmetal writing (6), and fused filament fabrication [more often known by the trademarked term fused deposition modeling (FDM)] (7) use a 1D fundamental unit.”
BackgroundZhi, D., Li, T., Li, J., Ren, H., & Meng, F. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.108642 · Cited by 375
3D‐Printed All‐Fiber Li‐Ion Battery toward Wearable Energy Storage
Wang, Y., Chen, C., Xie, H., Gao, T., Yao, Y., Pastel, G., Han, X., Li, Y., Zhao, J., Fu, K. (., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201703140 · Cited by 374
Direct 3D Printing of Ultralight Graphene Oxide Aerogel Microlattices
Jiang, Y., Xu, Z., Huang, T., Liu, Y., Guo, F., Xi, J., Gao, W., & Gao, C. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707024 · Cited by 370
Fabrication of Biomedical Scaffolds Using Biodegradable Polymers.
Kirillova, A., Yeazel, T. R., Asheghali, D., Petersen, S. R., Dort, S., Gall, K., & Becker, M. L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01200 · Cited by 368
4D Printing Technology: A Review
Choi, J., Kwon, O.-C., Jo, W., Lee, H. J., & Moon, M.-W. (2015) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2015.0039 · Cited by 365
A Review of Three-Dimensional Printing in Tissue Engineering
Sears, N. A., Seshadri, D. R., Dhavalikar, P. S., & Cosgriff-Hernandez, E. (2016) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2015.0464 · Cited by 360
3D Printing Quasi‐Solid‐State Asymmetric Micro‐Supercapacitors with Ultrahigh Areal Energy Density
Shen, K. B., Ding, J., & Yang, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800408 · Cited by 358
3D-printing and advanced manufacturing for electronics
Espera, A. H., Dizon, J. R. C., Chen, Q., & Advincula, R. C. (2019) · Progress in Additive Manufacturing · doi:10.1007/s40964-019-00077-7 · Cited by 356
“Paste extrusion can use a similar machine set-up with the wet-spinning apparatus [36] and the continuous filament writing technique [37].”
MethodSoft Robots Manufacturing: A Review
Schmitt, F., Piccin, O., Barbé, L., & Bayle, B. (2018) · Frontiers in Robotics and AI · doi:10.3389/frobt.2018.00084 · Cited by 343
“Finally, halfway between FDM and inkjets, direct ink writing (Lewis, 2006) is a method that uses solidifying viscous inks to create complex shapes.”
MethodDesign and advanced manufacturing of electromagnetic interference shielding materials
Liu, J., Yu, M.-Y., Yu, Z.-Z., & Nicolosi, V. (2023) · Materials Today · doi:10.1016/j.mattod.2023.03.022 · Cited by 332
Polymer Design for 3D Printing Elastomers: Recent Advances in Structure, Properties, and Printing
Herzberger, J., Sirrine, J. M., Williams, C. B., & Long, T. E. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101144 · Cited by 329
Direct ink writing advances in multi-material structures for a sustainable future
Rocha, V. G., Saiz, E., Tirichenko, I. S., & García-Tuñón, E. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta04181e · Cited by 327
Additive manufacturing of multi-directional preforms for composites: opportunities and challenges
Quan, Z., Wu, A., Keefe, M., Qin, X., Yu, J., Suhr, J., Byun, J.-H., Kim, B.-S., & Chou, T.-W. (2015) · Materials Today · doi:10.1016/j.mattod.2015.05.001 · Cited by 324
Roach, D. J., Yuan, C., Kuang, X., Li, V. C.-F., Blake, P., Romero, M. L., Hammel, I., Yu, K., & Qi, H. J. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b04401 · Cited by 319
Lewicki, J. P., Rodriguez, J. N., Zhu, C., Worsley, M. A., Wu, A. S., Kanarska, Y., Horn, J. D., Duoss, E. B., Ortega, J. M., Elmer, W., et al. (2017) · Scientific Reports · doi:10.1038/srep43401 · Cited by 318
Three‐Dimensional Printing of Elastomeric, Cellular Architectures with Negative Stiffness
Duoss, E. B., Weisgraber, T. H., Hearon, K., Zhu, C., Small, W., Metz, T. R., Vericella, J. J., Barth, H. D., Kuntz, J. D., Maxwell, R. S., et al. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400451 · Cited by 316
Liquid crystal elastomers: an introduction and review of emerging technologies
Ula, S. W., Traugutt, N. A., Volpe, R. H., Patel, R. R., Yu, K., & Yakacki, C. M. (2018) · Liquid Crystals Reviews · doi:10.1080/21680396.2018.1530155 · Cited by 316
“cific architecture and composition [142].”
Active mixing of complex fluids at the microscale
Ober, T. J., Foresti, D., & Lewis, J. A. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1509224112 · Cited by 306
“For example, concentrated viscoelastic inks are patterned by direct ink writing, an extrusion-based 3D printing method (19).”
Self-citation3D printing of functional microrobots
Li, J., & Pumera, M. (2021) · Chemical Society Reviews · doi:10.1039/d0cs01062f · Cited by 303
Rotational 3D printing of damage-tolerant composites with programmable mechanics
Raney, J. R., Compton, B. G., Mueller, J., Ober, T. J., Shea, K., & Lewis, J. A. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1715157115 · Cited by 301
Self-citationChen, H., Xie, F., Chen, L., & Zheng, B. (2019) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2018.09.011 · Cited by 301
“286 This was as expected since materials with suitable G' and τy showed better shape retention capability 287 and high resolutions (Lewis, 2006; Zhang et al., 2015).”
Background3D printed reversible shape changing soft actuators assisted by liquid crystal elastomers
Yuan, C., Roach, D. J., Dunn, C. K., Mu, Q., Kuang, X., Yakacki, C. M., Wang, T. J., Yu, K., & Qi, H. J. (2017) · Soft Matter · doi:10.1039/c7sm00759k · Cited by 300
Additive Manufacturing of Batteries
Pang, Y., Cao, Y., Chu, Y., Liu, M., Snyder, K., MacKenzie, D., & Cao, C. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201906244 · Cited by 298
Classifications and Applications of Inkjet Printing Technology: A Review
Shah, M. A., Lee, D.-G., Lee, B.-Y., & Hur, S. (2021) · IEEE Access · doi:10.1109/access.2021.3119219 · Cited by 295
“, EHD [136], which was used for direct writing techniques or droplet jetting [137]-[139].”
MethodTransformer Hydrogels: A Review
Erol, O., Pantula, A., Liu, W., & Gracias, D. H. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900043 · Cited by 293
4D printing of materials for the future: Opportunities and challenges
Joshi, S., Rawat, K., C, K., Rajamohan, V., Mathew, A. T., Koziol, K., Kumar Thakur, V., & A.S.S, B. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2019.100490 · Cited by 288
“Direct ink writing (DIW) employs nozzles to deposit viscoelastic inks under large pressure to form 3D structures [91].”
BackgroundDirect‐Write Assembly of Microperiodic Silk Fibroin Scaffolds for Tissue Engineering Applications
Ghosh, S., Parker, S. T., Wang, X., Kaplan, D. L., & Lewis, J. A. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200800040 · Cited by 287
Self-citationA review of 3D printed porous ceramics
Zhang, F., Li, Z., Xu, M., Wang, S., Li, N., & Yang, J. (2022) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2022.02.039 · Cited by 284
Dynamics of Cellulose Nanocrystal Alignment during 3D Printing
Hausmann, M. K., Rühs, P. A., Siqueira, G., Läuger, J., Libanori, R., Zimmermann, T., & Studart, A. R. (2018) · ACS Nano · doi:10.1021/acsnano.8b02366 · Cited by 282
Direct ink writing of energy materials
Tagliaferri, S., Panagiotopoulos, A., & Mattevi, C. (2021) · Materials Advances · doi:10.1039/d0ma00753f · Cited by 281
3D‐Printed Anisotropic Polymer Materials for Functional Applications
Chen, J., Liu, X., Tian, Y., Zhu, W., Yan, C., Shi, Y., Kong, L. B., Qi, H. J., & Zhou, K. (2022) · Advanced Materials · doi:10.1002/adma.202102877 · Cited by 281
Challenges of continuum robots in clinical context: a review
da Veiga, T., Chandler, J. H., Lloyd, P., Pittiglio, G., Wilkinson, N. J., Hoshiar, A. K., Harris, R. A., & Valdastri, P. (2020) · Progress in Biomedical Engineering · doi:10.1088/2516-1091/ab9f41 · Cited by 280
“Robust DIW processes require a high nozzle-particle diameter ratio or a low loading fraction to achieve reliable deposition [210].”
Background3D printing of piezoelectric element for energy focusing and ultrasonic sensing
Chen, Z., Song, X., Lei, L., Chen, X., Fei, C., Chiu, C. T., Qian, X., Ma, T., Yang, Y., Shung, K., et al. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.06.048 · Cited by 277
Wang, J., Cai, G., Li, S., Gao, D., Xiong, J., & Lee, P. S. (2018) · Advanced Materials · doi:10.1002/adma.201706157 · Cited by 274
Nguyen, D. T., Meyers, C., Yee, T. D., Dudukovic, N. A., Destino, J. F., Zhu, C., Duoss, E. B., Baumann, T. F., Suratwala, T., Smay, J. E., et al. (2017) · Advanced Materials · doi:10.1002/adma.201701181 · Cited by 273
Direct Ink Write (DIW) 3D Printed Cellulose Nanocrystal Aerogel Structures
Li, V. C.-F., Dunn, C. K., Zhang, Z., Deng, Y., & Qi, H. J. (2017) · Scientific Reports · doi:10.1038/s41598-017-07771-y · Cited by 269
Breakthrough in the printing tactics for stimuli-responsive materials: 4D printing
Rastogi, P., & Kandasubramanian, B. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.02.085 · Cited by 267
Nanomaterial Patterning in 3D Printing
Elder, B., Neupane, R., Tokita, E., Ghosh, U., Hales, S., & Kong, Y. L. (2020) · Advanced Materials · doi:10.1002/adma.201907142 · Cited by 265
Shen, X., Zheng, Q., & Kim, J.-K. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100708 · Cited by 264
Electrospinning and additive manufacturing: converging technologies
Dalton, P. D., Vaquette, C., Farrugia, B. L., Dargaville, T. R., Brown, T. D., & Hutmacher, D. W. (2013) · Biomater. Sci. · doi:10.1039/c2bm00039c · Cited by 264
Gorgolis, G., & Galiotis, C. (2017) · 2D Materials · doi:10.1088/2053-1583/aa7883 · Cited by 259
“This technique uses a three-axis motion to create 3D structures by mechanically extorting a continuous ink filament through a micronozzle at RT and depositing it layer-by-layer [110].”
MethodAdvanced Polymer Designs for Direct‐Ink‐Write 3D Printing
Li, L., Lin, Q., Tang, M., Duncan, A. J. E., & Ke, C. (2019) · Chemistry – A European Journal · doi:10.1002/chem.201900975 · Cited by 258
Designed Assembly and Integration of Colloidal Nanocrystals for Device Applications
Yang, J., Choi, M. K., Kim, D., & Hyeon, T. (2016) · Advanced Materials · doi:10.1002/adma.201502851 · Cited by 256
3D Printing Sulfur Copolymer‐Graphene Architectures for Li‐S Batteries
Shen, K., Mei, H., Li, B., Ding, J., & Yang, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701527 · Cited by 256
Metadata
- Authors
- Lewis, J. A.
- Affiliations
- University of Illinois Urbana-Champaign (US)
- Corresponding author
- Lewis, J. A.
- ORCID
- Lewis, J. A.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2006-10-27
- Volume
- 16
- Issue
- 17
- Pages
- 2193-2204
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2143765114
- Cited by
- 1,740
- References
- 80
- Citations by year
- 2026: 153 · 2025: 150 · 2024: 145 · 2023: 180 · 2022: 183 · 2021: 202 · 2020: 154 · 2019: 161 · 2018: 115 · 2017: 78 · 2016: 53 · 2015: 38 · 2014: 28 · 2013: 19 · 2012: 26
- FWCI
- 17.02
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Functional Materials (publishedVersion)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Nanomaterials and Printing Technologies
- Keywords
- direct ink writing, 3D printing, additive manufacturing, 3D patterning, feature size reduction, composite materials, microfluidics, photonics, tissue engineering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.