The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
Few‐Layered SnS2 on Few‐Layered Reduced Graphene Oxide as Na‐Ion Battery Anode with Ultralong Cycle Life and Superior Rate Capability
Abstract
Na‐ion Batteries have been considered as promising alternatives to Li‐ion batteries due to the natural abundance of sodium resources. Searching for high‐performance anode materials currently becomes a hot topic and also a great challenge for developing Na‐ion batteries. In this work, a novel hybrid anode is synthesized consisting of ultrafine, few‐layered SnS 2 anchored on few‐layered reduced graphene oxide (rGO) by a facile solvothermal route. The SnS 2/rGO hybrid exhibits a high capacity, ultralong cycle life, and superior rate capability. The hybrid can deliver a high charge capacity of 649 mAh g−1 at 100 mA g−1. At 800 mA g−1 (1.8 C), it can yield an initial charge capacity of 469 mAh g−1, which can be maintained at 89% and 61%, respectively, after 400 and 1000 cycles. The hybrid can also sustain a current density up to 12.8 A g−1 (≈28 C) where the charge process can be completed in only 1.3 min while still delivering a charge capacity of 337 mAh g−1. The fast and stable Na‐storage ability of SnS 2/rGO makes it a promising anode for Na‐ion batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene
Lee, C., Wei, X., Kysar, J. W., & Hone, J. (2008) · Science · doi:10.1126/science.1157996 · Cited by 20,847
Graphene-Based Ultracapacitors
Stoller, M. D., Park, S., Zhu, Y., An, J., & Ruoff, R. S. (2008) · Nano Letters · doi:10.1021/nl802558y · Cited by 8,373
Slater, M. D., Kim, D., Lee, E., & Johnson, C. S. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200691 · Cited by 4,518
Na-ion batteries, recent advances and present challenges to become low cost energy storage systems
Palomares, V., Serras, P., Villaluenga, I., Hueso, K. B., Carretero-González, J., & Rojo, T. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02781j · Cited by 3,564
Kim, S., Seo, D., Ma, X., Ceder, G., & Kang, K. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200026 · Cited by 3,370
Efficient Reduction of Graphite Oxide by Sodium Borohydride and Its Effect on Electrical Conductance
Shin, H., Kim, K. K., Benayad, A., Yoon, S., Park, H. K., Jung, I., Jin, M. H., Jeong, H., Kim, J. M., Choi, J., et al. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200900167 · Cited by 2,283
Komaba, S., Murata, W., Ishikawa, T., Yabuuchi, N., Ozeki, T., Nakayama, T., Ogata, A., Gotoh, K., & Fujiwara, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100854 · Cited by 2,116
Sodium Ion Insertion in Hollow Carbon Nanowires for Battery Applications
Cao, Y., Xiao, L., Sushko, M. L., Wang, W., Schwenzer, B., Xiao, J., Nie, Z., Saraf, L. V., Yang, Z., & Liu, J. (2012) · Nano Letters · doi:10.1021/nl3016957 · Cited by 1,929
High Capacity Anode Materials for Rechargeable Sodium-Ion Batteries
Stevens, D. A., & Dahn, J. R. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393348 · Cited by 1,884
Colloidal Suspensions of Highly Reduced Graphene Oxide in a Wide Variety of Organic Solvents
Park, S., An, J., Jung, I., Piner, R. D., An, S. J., Li, X., Velamakanni, A., & Ruoff, R. S. (2009) · Nano Letters · doi:10.1021/nl803798y · Cited by 1,647
MoS2/Graphene Composite Paper for Sodium-Ion Battery Electrodes
David, L., Bhandavat, R., & Singh, G. (2014) · ACS Nano · doi:10.1021/nn406156b · Cited by 1,212
Update on Na-based battery materials. A growing research path
Palomares, V., Casas-Cabanas, M., Castillo-Martínez, E., Han, M. H., & Rojo, T. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41031e · Cited by 992
Carbon Nanosheet Frameworks Derived from Peat Moss as High Performance Sodium Ion Battery Anodes
Ding, J., Wang, H., Li, Z., Kohandehghan, A., Cui, K., Xu, Z., Zahiri, B., Tan, X., Lotfabad, E. M., Olsen, B. C., et al. (2013) · ACS Nano · doi:10.1021/nn404640c · Cited by 979
High-Density Sodium and Lithium Ion Battery Anodes from Banana Peels
Lotfabad, E. M., Ding, J., Cui, K., Kohandehghan, A., Kalisvaart, W. P., Hazelton, M., & Mitlin, D. (2014) · ACS Nano · doi:10.1021/nn502045y · Cited by 907
Challenges for Na-ion Negative Electrodes
Chevrier, V. L., & Ceder, G. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3607983 · Cited by 862
Charge carriers in rechargeable batteries: Na ions vs. Li ions
Hong, S. Y., Kim, Y., Park, Y., Choi, A., Choi, N.-S., & Lee, K. T. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40811f · Cited by 830
Etacheri, V., Haik, O., Goffer, Y., Roberts, G. A., Stefan, I. C., Fasching, R., & Aurbach, D. (2012) · Langmuir · doi:10.1021/la203712s · Cited by 817
Electrochemical intercalation of sodium in graphite
GE, P. (1988) · Solid State Ionics · doi:10.1016/0167-2738(88)90351-7 · Cited by 726
Wang, H., Wu, Z., Meng, F., Ma, D., Huang, X., Wang, L., & Zhang, X. (2013) · ChemSusChem · doi:10.1002/cssc.201200680 · Cited by 639
Electrospun Sb/C Fibers for a Stable and Fast Sodium-Ion Battery Anode
Zhu, Y., Han, X., Xu, Y., Liu, Y., Zheng, S., Xu, K., Hu, L., & Wang, C. (2013) · ACS Nano · doi:10.1021/nn4025674 · Cited by 639
Zhou, T., Pang, W. K., Zhang, C., Yang, J., Chen, Z., Liu, H. K., & Guo, Z. (2014) · ACS Nano · doi:10.1021/nn503582c · Cited by 634
Xiao, L., Cao, Y., Xiao, J., Wang, W., Kovarik, L., Nie, Z., & Liu, J. (2012) · Chemical Communications · doi:10.1039/c2cc17129e · Cited by 601
Microstructural Evolution of Tin Nanoparticles during In Situ Sodium Insertion and Extraction
Wang, J., Liu, X. H., Mao, S. X., & Huang, J. Y. (2012) · Nano Letters · doi:10.1021/nl303305c · Cited by 583
Du, G., Guo, Z., Wang, S., Zeng, R., Chen, Z., & Liu, H. (2010) · Chem. Commun. · doi:10.1039/b920277c · Cited by 579
Reduced graphene oxide with superior cycling stability and rate capability for sodium storage
Wang, Y.-X., Chou, S.-L., Liu, H.-K., & Dou, S.-X. (2013) · Carbon · doi:10.1016/j.carbon.2013.01.064 · Cited by 561
Two‐Dimensional SnS2 Nanoplates with Extraordinary High Discharge Capacity for Lithium Ion Batteries
Seo, J., Jang, J., Park, S., Kim, C., Park, B., & Cheon, J. (2008) · Advanced Materials · doi:10.1002/adma.200703122 · Cited by 549
Electrochemical Insertion of Sodium into Carbon
Doeff, M. M., Ma, Y., Visco, S. J., & De Jonghe, L. C. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221153 · Cited by 514
Controlling SEI Formation on SnSb‐Porous Carbon Nanofibers for Improved Na Ion Storage
Ji, L., Gu, M., Shao, Y., Li, X., Engelhard, M. H., Arey, B. W., Wang, W., Nie, Z., Xiao, J., Wang, C., et al. (2014) · Advanced Materials · doi:10.1002/adma.201304962 · Cited by 489
High capacity hard carbon anodes for sodium ion batteries in additive free electrolyte
Ponrouch, A., Goñi, A. R., & Palacín, M. R. (2013) · Electrochemistry Communications · doi:10.1016/j.elecom.2012.10.038 · Cited by 475
Defective Graphene as a High-Capacity Anode Material for Na- and Ca-Ion Batteries
Datta, D., Li, J., & Shenoy, V. B. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am404788e · Cited by 421
Two dimensional graphene–SnS2hybrids with superior rate capability for lithium ion storage
Luo, B., Fang, Y., Wang, B., Zhou, J., Song, H., & Zhi, L. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee02800f · Cited by 400
Tin Phosphide as a Promising Anode Material for Na‐Ion Batteries
Kim, Y., Kim, Y., Choi, A., Woo, S., Mok, D., Choi, N., Jung, Y. S., Ryu, J. H., Oh, S. M., & Lee, K. T. (2014) · Advanced Materials · doi:10.1002/adma.201305638 · Cited by 393
Synthesis of Surface-Functionalized WS2 Nanosheets and Performance as Li-Ion Battery Anodes
Bhandavat, R., David, L., & Singh, G. (2012) · The Journal of Physical Chemistry Letters · doi:10.1021/jz300480w · Cited by 385
Huang, G., Chen, T., Chen, W., Wang, Z., Chang, K., Ma, L., Huang, F., Chen, D., & Lee, J. Y. (2013) · Small · doi:10.1002/smll.201300415 · Cited by 351
Anodes for Sodium Ion Batteries Based on Tin–Germanium–Antimony Alloys
Farbod, B., Cui, K., Kalisvaart, W. P., Kupsta, M., Zahiri, B., Kohandehghan, A., Lotfabad, E. M., Li, Z., Luber, E. J., & Mitlin, D. (2014) · ACS Nano · doi:10.1021/nn4063598 · Cited by 343
Jian, Z., Zhao, B., Liu, P., Li, F., Zheng, M., Chen, M. W., Shi, Y., & Zhou, H. S. (2013) · Chemical Communications · doi:10.1039/c3cc47977c · Cited by 314
Chang, K., Wang, Z., Huang, G., Li, H., Chen, W., & Lee, J. Y. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.10.132 · Cited by 264
Electrochemical insertion of sodium into hard carbons
Thomas, P., & Billaud, D. (2002) · Electrochimica Acta · doi:10.1016/s0013-4686(02)00250-5 · Cited by 257
Investigation of CoS2-based thin films as model catalysts for the oxygen reduction reaction
ZHU, L., SUSAC, D., TEO, M., WONG, K., WONG, P., PARSONS, R., BIZZOTTO, D., MITCHELL, K., & CAMPBELL, S. (2008) · Journal of Catalysis · doi:10.1016/j.jcat.2008.06.016 · Cited by 247
SnO2@MWCNT nanocomposite as a high capacity anode material for sodium-ion batteries
Wang, Y., Su, D., Wang, C., & Wang, G. (2013) · Electrochemistry Communications · doi:10.1016/j.elecom.2013.01.001 · Cited by 242
Su, D., Dou, S., & Wang, G. (2014) · Chemical Communications · doi:10.1039/c4cc00840e · Cited by 239
Wang, Y., Chou, S., Wexler, D., Liu, H., & Dou, S. (2014) · Chemistry – A European Journal · doi:10.1002/chem.201402563 · Cited by 215
Liu, H., Su, D., Wang, G., & Qiao, S. Z. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm33992g · Cited by 197
In situ nitrogenated graphene–few-layer WS2 composites for fast and reversible Li+ storage
Chen, D., Ji, G., Ding, B., Ma, Y., Qu, B., Chen, W., & Lee, J. Y. (2013) · Nanoscale · doi:10.1039/c3nr02920d · Cited by 189
Synthesis of tungsten disulfide (WS2) nanoflakes for lithium ion battery application
Feng, C., Huang, L., Guo, Z., & Liu, H. (2007) · Electrochemistry Communications · doi:10.1016/j.elecom.2006.08.048 · Cited by 180
Self-citationReversible sodium storage via conversion reaction of a MoS 2 –C composite
Wang, Y., Seng, K. H., Chou, S., Wang, J., Guo, Z., Wexler, D. B., Liu, H., & Dou, S. X. (2014) · Chemical Communications · doi:10.1039/c4cc00294f · Cited by 112
EPR, NMR, and Electrochemical Studies of Surface-Modified Carbon Microbeads
Alcántara, R., Ortiz, G. F., Lavela, P., Tirado, J. L., Stoyanova, R. K., & Zhecheva, E. N. (2006) · Chemistry of Materials · doi:10.1021/cm060060p · Cited by 93
Cited by
Sodium-ion batteries: present and future
Hwang, J.-Y., Myung, S.-T., & Sun, Y.-K. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00776g · Cited by 5,305
Chao, D., Liang, P., Chen, Z., Bai, L., Shen, H., Liu, X., Xia, X., Zhao, Y., Savilov, S. V., Lin, J., et al. (2016) · ACS Nano · doi:10.1021/acsnano.6b05566 · Cited by 973
Wu, X., Wang, Z., Yu, M., Xiu, L., & Qiu, J. (2017) · Advanced Materials · doi:10.1002/adma.201607017 · Cited by 800
Recent progress on sodium ion batteries: potential high-performance anodes
Li, L., Zheng, Y., Zhang, S., Yang, J., Shao, Z., & Guo, Z. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01023d · Cited by 740
Self-citationA review of carbon materials and their composites with alloy metals for sodium ion battery anodes
Balogun, M.-S., Luo, Y., Qiu, W., Liu, P., & Tong, Y. (2016) · Carbon · doi:10.1016/j.carbon.2015.09.091 · Cited by 671
Metadata
- Authors
- Zhang, Y., Zhu, P., Huang, L., Xie, J., Zhang, S., Cao, G., & Zhao, X.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2014-11-26
- Volume
- 25
- Issue
- 3
- Pages
- 481-489
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2084795765
- Cited by
- 428
- References
- 47
- FWCI
- 20.52
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.