The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Confined Sulfur in Microporous Carbon Renders Superior Cycling Stability in Li/S Batteries
Abstract
The use of sulfur in the next generation Li‐ion batteries is currently precluded by its poor cycling stability caused by irreversible Li 2 S formation and the dissolution of soluble polysulfides in organic electrolytes that leads to parasitic cell reactions. Here, a new C/S cathode material comprising short‐chain sulfur species (predominately S 2) confined in carbonaceous subnanometer and the unique charge mechanism for the subnano‐entrapped S 2 cathodes are reported. The first charge–discharge cycle of the C/S cathode in the carbonate electrolyte forms a new type of thiocarbonate‐like solid electrolyte interphase (SEI). The SEI coated C/S cathode stably delivers ≈600 mAh g−1 capacity over 4020 cycles (0.0014% loss cycle−1) at ≈100% Coulombic efficiency. Extensive X‐ray photoelectron spectroscopy analysis of the discharged cathodes shows a new type of S 2 species and a new carbide‐like species simultaneously, and both peaks disappear upon charging. These data suggest a new sulfur redox mechanism involving a separated Li+/S 2− ion couple that precludes Li 2 S compound formation and prevents the dissolution of soluble sulfur anions. This new charge/discharge process leads to remarkable cycling stability and reversibility.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Nonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries
Xu, K. (2004) · Chemical Reviews · doi:10.1021/cr030203g · Cited by 7,437
Self-citationA highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Electrochemical Energy Storage for Green Grid
Yang, Z., Zhang, J., Kintner-Meyer, M. C. W., Lu, X., Choi, D., Lemmon, J. P., & Liu, J. (2011) · Chemical Reviews · doi:10.1021/cr100290v · Cited by 5,250
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Lithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
Challenges and Prospects of Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., & Su, Y.-S. (2013) · Accounts of Chemical Research · doi:10.1021/ar300179v · Cited by 2,380
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Wang, H., Yang, Y., Liang, Y., Robinson, J. T., Li, Y., Jackson, A., Cui, Y., & Dai, H. (2011) · Nano Letters · doi:10.1021/nl200658a · Cited by 2,119
Wei Seh, Z., Li, W., Cha, J. J., Zheng, G., Yang, Y., McDowell, M. T., Hsu, P.-C., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2327 · Cited by 2,107
Nanostructured sulfur cathodes
Yang, Y., Zheng, G., & Cui, Y. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35256g · Cited by 1,947
Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100637 · Cited by 1,811
Smaller Sulfur Molecules Promise Better Lithium–Sulfur Batteries
Xin, S., Gu, L., Zhao, N.-H., Yin, Y.-X., Zhou, L.-J., Guo, Y.-G., & Wan, L.-J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja308170k · Cited by 1,644
Graphene Oxide as a Sulfur Immobilizer in High Performance Lithium/Sulfur Cells
Ji, L., Rao, M., Zheng, H., Zhang, L., Li, Y., Duan, W., Guo, J., Cairns, E. J., & Zhang, Y. (2011) · Journal of the American Chemical Society · doi:10.1021/ja206955k · Cited by 1,505
Lithium–sulphur batteries with a microporous carbon paper as a bifunctional interlayer
Su, Y.-S., & Manthiram, A. (2012) · Nature Communications · doi:10.1038/ncomms2163 · Cited by 1,458
The use of elemental sulfur as an alternative feedstock for polymeric materials
Chung, W. J., Griebel, J. J., Kim, E. T., Yoon, H., Simmonds, A. G., Ji, H. J., Dirlam, P. T., Glass, R. S., Wie, J. J., Nguyen, N. A., et al. (2013) · Nature Chemistry · doi:10.1038/nchem.1624 · Cited by 1,455
New Approaches for High Energy Density Lithium–Sulfur Battery Cathodes
Evers, S., & Nazar, L. F. (2013) · Accounts of Chemical Research · doi:10.1021/ar3001348 · Cited by 1,324
Zhang, B., Qin, X., Li, G. R., & Gao, X. P. (2010) · Energy & Environmental Science · doi:10.1039/c002639e · Cited by 1,280
Sulfur-Impregnated Disordered Carbon Nanotubes Cathode for Lithium–Sulfur Batteries
Guo, J., Xu, Y., & Wang, C. (2011) · Nano Letters · doi:10.1021/nl202297p · Cited by 1,278
Self-citationUltimate Limits to Intercalation Reactions for Lithium Batteries
Whittingham, M. S. (2014) · Chemical Reviews · doi:10.1021/cr5003003 · Cited by 1,130
The NIST x‐ray photoelectron spectroscopy database
Rumble, J. R., Bickham, D. M., & Powell, C. J. (1992) · Surface and Interface Analysis · doi:10.1002/sia.740190147 · Cited by 1,029
Xiao, L., Cao, Y., Xiao, J., Schwenzer, B., Engelhard, M. H., Saraf, L. V., Nie, Z., Exarhos, G. J., & Liu, J. (2012) · Advanced Materials · doi:10.1002/adma.201103392 · Cited by 1,016
Meyer, B. (1976) · Chemical Reviews · doi:10.1021/cr60301a003 · Cited by 996
Dahn, J. R. (1991) · Physical Review B · doi:10.1103/physrevb.44.9170 · Cited by 991
Barchasz, C., Molton, F., Duboc, C., Leprêtre, J.-C., Patoux, S., & Alloin, F. (2012) · Analytical Chemistry · doi:10.1021/ac2032244 · Cited by 946
Stabilizing lithium–sulphur cathodes using polysulphide reservoirs
Ji, X., Evers, S., Black, R., & Nazar, L. F. (2011) · Nature Communications · doi:10.1038/ncomms1293 · Cited by 864
A Novel Conductive Polymer-Sulfur Composite Cathode Material for Rechargeable Lithium Batteries
Wang, J., Yang, J., Xie, J., & Xu, N. (2002) · Advanced Materials · doi:10.1002/1521-4095(20020704)14:13/14<963::aid-adma963>3.0.co;2-s · Cited by 818
Yang, Y., Zheng, G., Misra, S., Nelson, J., Toney, M. F., & Cui, Y. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3052206 · Cited by 718
Phosphorous Pentasulfide as a Novel Additive for High‐Performance Lithium‐Sulfur Batteries
Lin, Z., Liu, Z., Fu, W., Dudney, N. J., & Liang, C. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200696 · Cited by 450
A strategic approach to recharging lithium-sulphur batteries for long cycle life
Su, Y.-S., Fu, Y., Cochell, T., & Manthiram, A. (2013) · Nature Communications · doi:10.1038/ncomms3985 · Cited by 449
Lithium–Sulfur Battery Cathode Enabled by Lithium–Nitrile Interaction
Guo, J., Yang, Z., Yu, Y., Abruña, H. D., & Archer, L. A. (2013) · Journal of the American Chemical Society · doi:10.1021/ja309435f · Cited by 343
Highly Reversible Lithium/Dissolved Polysulfide Batteries with Carbon Nanotube Electrodes
Fu, Y., Su, Y., & Manthiram, A. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201301250 · Cited by 334
An Advanced Lithium‐Sulfur Battery
Kim, J., Lee, D. J., Jung, H., Sun, Y., Hassoun, J., & Scrosati, B. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200689 · Cited by 329
Yim, T., Park, M.-S., Yu, J.-S., Kim, K. J., Im, K. Y., Kim, J.-H., Jeong, G., Jo, Y. N., Woo, S.-G., Kang, K. S., et al. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.06.039 · Cited by 328
Suppression of staging in lithium-intercalated carbon by disorder in the host
Dahn, J. R., Fong, R., & Spoon, M. J. (1990) · Physical Review B · doi:10.1103/physrevb.42.6424 · Cited by 310
Nanostructured Li2S–C Composites as Cathode Material for High-Energy Lithium/Sulfur Batteries
Cai, K., Song, M.-K., Cairns, E. J., & Zhang, Y. (2012) · Nano Letters · doi:10.1021/nl303965a · Cited by 307
Conducting linear chains of sulphur inside carbon nanotubes
Fujimori, T., Morelos-Gómez, A., Zhu, Z., Muramatsu, H., Futamura, R., Urita, K., Terrones, M., Hayashi, T., Endo, M., Young Hong, S., et al. (2013) · Nature Communications · doi:10.1038/ncomms3162 · Cited by 284
Ye, H., Yin, Y.-X., Xin, S., & Guo, Y.-G. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta10735c · Cited by 201
Lai, C.-H., Huang, K.-W., Cheng, J.-H., Lee, C.-Y., Hwang, B.-J., & Chen, L.-J. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00434k · Cited by 192
Gordin, M. L., Dai, F., Chen, S., Xu, T., Song, J., Tang, D., Azimi, N., Zhang, Z., & Wang, D. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am501665s · Cited by 176
New insight into liquid electrolyte of rechargeable lithium/sulfur battery
Zhang, S. S. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.02.122 · Cited by 123
Graphite/Electrolyte Interface Formed in LiBOB-Based Electrolytes
Xu, K., Lee, U., Zhang, S. S., Allen, J. L., & Jow, T. R. (2004) · Electrochemical and Solid-State Letters · doi:10.1149/1.1774973 · Cited by 80
Self-citationFacile synthesis of FeS2 nanocrystals and their magnetic and electrochemical properties
Xia, J., Jiao, J., Dai, B., Qiu, W.-D., He, S., Qiu, W., Shen, P. K., & Chen, L. (2013) · RSC Advances · doi:10.1039/c3ra22405h · Cited by 79
A High Precision Study of the Effect of Vinylene Carbonate (VC) Additive in Li∕Graphite Cells
Xiong, D., Burns, J. C., Smith, A. J., Sinha, N. N., & Dahn, J. R. (2011) · Journal of The Electrochemical Society · doi:10.1149/2.100112jes · Cited by 70
Cited by
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Transition metal nitrides for electrochemical energy applications
Wang, H., Li, J., Li, K., Lin, Y., Chen, J., Gao, L., Nicolosi, V., Xiao, X., & Lee, J.-M. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00415d · Cited by 983
Current Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
Mao, Y., Li, G., Guo, Y., Li, Z., Liang, C., Peng, X., & Lin, Z. (2017) · Nature Communications · doi:10.1038/ncomms14628 · Cited by 518
Rational Design of Nanostructured Functional Interlayer/Separator for Advanced Li–S Batteries
Jeong, Y. C., Kim, J. H., Nam, S., Park, C. R., & Yang, S. J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707411 · Cited by 429
Metadata
- Authors
- Xu, Y., Wen, Y., Zhu, Y., Gaskell, K., Cychosz, K. A., Eichhorn, B., Xu, K., & Wang, C.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2015-06
- Volume
- 25
- Issue
- 27
- Pages
- 4312-4320
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W1646979799
- Cited by
- 311
- References
- 45
- FWCI
- 20.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.