The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
3D Metal Carbide@Mesoporous Carbon Hybrid Architecture as a New Polysulfide Reservoir for Lithium‐Sulfur Batteries
Abstract
3D metal carbide@mesoporous carbon hybrid architecture (Ti 3 C 2 Tx@Meso‐C, TX ≈ FxOy) is synthesised and applied as cathode material hosts for lithium‐sulfur batteries. Exfoliated‐metal carbide (Ti 3 C 2 Tx) nanosheets have high electronic conductivity and contain rich functional groups for effective trapping of polysulfides. Mesoporous carbon with a robust porous structure provides sufficient spaces for loading sulfur and effectively cushion the volumetric expansion of sulfur cathodes. Theoretical calculations have confirmed that metal carbide can absorb sulfur and polysulfides, therefore extending the cycling performance. The Ti 3 C 2 Tx@Meso‐C/S cathodes have achieved a high capacity of 1225.8 mAh g−1 and more than 300 cycles at the C/2 current rate. The Ti 3 C 2 Tx@Meso‐C hybrid architecture is a promising cathode host material for lithium‐sulfur batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Special points for Brillouin-zone integrations
Monkhorst, H. J., & Pack, J. D. (1976) · Physical Review B · doi:10.1103/physrevb.13.5188 · Cited by 71,721
Soft self-consistent pseudopotentials in a generalized eigenvalue formalism
Vanderbilt, D. (1990) · Physical Review B · doi:10.1103/physrevb.41.7892 · Cited by 23,185
First-principles simulation: ideas, illustrations and the CASTEP code
Segall, M. D., Lindan, P. J. D., Probert, M. J., Pickard, C. J., Hasnip, P. J., Clark, S. J., & Payne, M. C. (2002) · Journal of Physics: Condensed Matter · doi:10.1088/0953-8984/14/11/301 · Cited by 11,853
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteries
Poizot, P., Laruelle, S., Grugeon, S., Dupont, L., & Tarascon, J.-M. (2000) · Nature · doi:10.1038/35035045 · Cited by 8,041
25th Anniversary Article: MXenes: A New Family of Two‐Dimensional Materials
Naguib, M., Mochalin, V. N., Barsoum, M. W., & Gogotsi, Y. (2014) · Advanced Materials · doi:10.1002/adma.201304138 · Cited by 6,414
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Nanostructured sulfur cathodes
Yang, Y., Zheng, G., & Cui, Y. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35256g · Cited by 1,947
Graphene/metal oxide composite electrode materials for energy storage
Wu, Z.-S., Zhou, G., Yin, L.-C., Ren, W., Li, F., & Cheng, H.-M. (2012) · Nano Energy · doi:10.1016/j.nanoen.2011.11.001 · Cited by 1,836
Cited by
Recent Advances in Layered Ti3C2Tx MXene for Electrochemical Energy Storage
Xiong, D., Li, X., Bai, Z., & Lu, S. (2018) · Small · doi:10.1002/smll.201703419 · Cited by 1,006
Hong Ng, V. M., Huang, H., Zhou, K., Lee, P. S., Que, W., Xu, J. Z., & Kong, L. B. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta06772g · Cited by 784
Bao, W., Liu, L., Wang, C., Choi, S., Wang, D., & Wang, G. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702485 · Cited by 745
Self-citationRevisiting the Role of Polysulfides in Lithium–Sulfur Batteries
Li, G., Wang, S., Zhang, Y., Li, M., Chen, Z., & Lu, J. (2018) · Advanced Materials · doi:10.1002/adma.201705590 · Cited by 711
Nanoengineering of 2D MXene‐Based Materials for Energy Storage Applications
Nan, J., Guo, X., Xiao, J., Li, X., Chen, W., Wu, W., Liu, H., Wang, Y., Wu, M., & Wang, G. (2021) · Small · doi:10.1002/smll.201902085 · Cited by 685
Self-citationYuan, H., Peng, H., Li, B., Xie, J., Kong, L., Zhao, M., Chen, X., Huang, J., & Zhang, Q. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201802768 · Cited by 626
Lim, K. R. G., Handoko, A. D., Nemani, S. K., Wyatt, B., Jiang, H.-Y., Tang, J., Anasori, B., & Seh, Z. W. (2020) · ACS Nano · doi:10.1021/acsnano.0c05482 · Cited by 585
Host Materials Anchoring Polysulfides in Li–S Batteries Reviewed
Zhou, L., Danilov, D. L., Eichel, R., & Notten, P. H. L. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202001304 · Cited by 516
Indra, A., Song, T., & Paik, U. (2018) · Advanced Materials · doi:10.1002/adma.201705146 · Cited by 507
3D MXene Architectures for Efficient Energy Storage and Conversion
Li, K., Liang, M., Wang, H., Wang, X., Huang, Y., Coelho, J., Pinilla, S., Zhang, Y., Qi, F., Nicolosi, V., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000842 · Cited by 498
Tang, X., Guo, X., Wu, W., & Wang, G. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801897 · Cited by 494
Self-citationPorous Cryo-Dried MXene for Efficient Capacitive Deionization
Bao, W., Tang, X., Guo, X., Choi, S., Wang, C., Gogotsi, Y., & Wang, G. (2018) · Joule · doi:10.1016/j.joule.2018.02.018 · Cited by 454
Self-citationMXenes for Rechargeable Batteries Beyond the Lithium‐Ion
Ming, F., Liang, H., Huang, G., Bayhan, Z., & Alshareef, H. N. (2021) · Advanced Materials · doi:10.1002/adma.202004039 · Cited by 424
A Comprehensive Understanding of Lithium–Sulfur Battery Technology
Li, T., Bai, X., Gulzar, U., Bai, Y., Capiglia, C., Deng, W., Zhou, X., Liu, Z., Feng, Z., & Proietti Zaccaria, R. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901730 · Cited by 422
Ye, C., Zhang, L., Guo, C., Li, D., Vasileff, A., Wang, H., & Qiao, S. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201702524 · Cited by 407
Ng, S., Lau, M. Y. L., & Ong, W. (2021) · Advanced Materials · doi:10.1002/adma.202008654 · Cited by 404
Rational design of two-dimensional nanomaterials for lithium–sulfur batteries
Jana, M., Xu, R., Cheng, X.-B., Yeon, J. S., Park, J. M., Huang, J.-Q., Zhang, Q., & Park, H. S. (2020) · Energy & Environmental Science · doi:10.1039/c9ee02049g · Cited by 393
Multifunctional Co3S4@sulfur nanotubes for enhanced lithium-sulfur battery performance
Pu, J., Shen, Z., Zheng, J., Wu, W., Zhu, C., Zhou, Q., Zhang, H., & Pan, F. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.05.009 · Cited by 369
Zhang, Z., Peng, H., Zhao, M., & Huang, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707536 · Cited by 357
Porous Carbon Composites for Next Generation Rechargeable Lithium Batteries
Liu, H., Liu, X., Li, W., Guo, X., Wang, Y., Wang, G., & Zhao, D. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700283 · Cited by 356
Self-citationMetal–organic frameworks for lithium–sulfur batteries
Zheng, Y., Zheng, S., Xue, H., & Pang, H. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta11075a · Cited by 351
Li, Z., He, Q., Xu, X., Zhao, Y., Liu, X., Zhou, C., Ai, D., Xia, L., & Mai, L. (2018) · Advanced Materials · doi:10.1002/adma.201804089 · Cited by 338
Status and Prospects of MXene‐Based Lithium–Sulfur Batteries
Zhao, Q., Zhu, Q., Liu, Y., & Xu, B. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202100457 · Cited by 334
A Bifunctional Perovskite Promoter for Polysulfide Regulation toward Stable Lithium–Sulfur Batteries
Kong, L., Chen, X., Li, B., Peng, H., Huang, J., Xie, J., & Zhang, Q. (2018) · Advanced Materials · doi:10.1002/adma.201705219 · Cited by 332
MXene‐Based Composites: Synthesis and Applications in Rechargeable Batteries and Supercapacitors
Yang, J., Bao, W., Jaumaux, P., Zhang, S., Wang, C., & Wang, G. (2019) · Advanced Materials Interfaces · doi:10.1002/admi.201802004 · Cited by 331
Self-citationChen, X., Peng, H.-J., Zhang, R., Hou, T.-Z., Huang, J.-Q., Li, B., & Zhang, Q. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00164 · Cited by 325
Yang, C., Tang, Y., Tian, Y., Luo, Y., Faraz Ud Din, M., Yin, X., & Que, W. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802087 · Cited by 320
Two‐dimensional MXenes for lithium‐sulfur batteries
Zhang, C. (., Cui, L., Abdolhosseinzadeh, S., & Heier, J. (2020) · InfoMat · doi:10.1002/inf2.12080 · Cited by 308
Banerjee, S., Mordina, B., Sinha, P., & Kar, K. K. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2024.115075 · Cited by 301
Yuan, H., Chen, X., Zhou, G., Zhang, W., Luo, J., Huang, H., Gan, Y., Liang, C., Xia, Y., Zhang, J., et al. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00465 · Cited by 296
Self-citationProgress in 3D-MXene Electrodes for Lithium/Sodium/Potassium/Magnesium/Zinc/Aluminum-Ion Batteries
Bashir, T., Zhou, S., Yang, S., Ismail, S. A., Ali, T., Wang, H., Zhao, J., & Gao, L. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-022-00174-2 · Cited by 284
Zhang, L., Chen, X., Wan, F., Niu, Z., Wang, Y., Zhang, Q., & Chen, J. (2018) · ACS Nano · doi:10.1021/acsnano.8b05466 · Cited by 259
Metadata
- Authors
- Bao, W., Su, D., Zhang, W., Guo, X., & Wang, G.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2016-10-31
- Volume
- 26
- Issue
- 47
- Pages
- 8746-8756
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2542162402
- Cited by
- 255
- References
- 45
- FWCI
- 15.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.