The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
3D Metal Carbide@Mesoporous Carbon Hybrid Architecture as a New Polysulfide Reservoir for Lithium‐Sulfur Batteries
Abstract
3D metal carbide@mesoporous carbon hybrid architecture (Ti 3 C 2 Tx@Meso‐C, TX ≈ FxOy) is synthesised and applied as cathode material hosts for lithium‐sulfur batteries. Exfoliated‐metal carbide (Ti 3 C 2 Tx) nanosheets have high electronic conductivity and contain rich functional groups for effective trapping of polysulfides. Mesoporous carbon with a robust porous structure provides sufficient spaces for loading sulfur and effectively cushion the volumetric expansion of sulfur cathodes. Theoretical calculations have confirmed that metal carbide can absorb sulfur and polysulfides, therefore extending the cycling performance. The Ti 3 C 2 Tx@Meso‐C/S cathodes have achieved a high capacity of 1225.8 mAh g−1 and more than 300 cycles at the C/2 current rate. The Ti 3 C 2 Tx@Meso‐C hybrid architecture is a promising cathode host material for lithium‐sulfur batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Special points for Brillouin-zone integrations
Monkhorst, H. J., & Pack, J. D. (1976) · Physical Review B · doi:10.1103/physrevb.13.5188 · Cited by 71,721
Soft self-consistent pseudopotentials in a generalized eigenvalue formalism
Vanderbilt, D. (1990) · Physical Review B · doi:10.1103/physrevb.41.7892 · Cited by 23,185
First-principles simulation: ideas, illustrations and the CASTEP code
Segall, M. D., Lindan, P. J. D., Probert, M. J., Pickard, C. J., Hasnip, P. J., Clark, S. J., & Payne, M. C. (2002) · Journal of Physics: Condensed Matter · doi:10.1088/0953-8984/14/11/301 · Cited by 11,853
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteries
Poizot, P., Laruelle, S., Grugeon, S., Dupont, L., & Tarascon, J.-M. (2000) · Nature · doi:10.1038/35035045 · Cited by 8,041
25th Anniversary Article: MXenes: A New Family of Two‐Dimensional Materials
Naguib, M., Mochalin, V. N., Barsoum, M. W., & Gogotsi, Y. (2014) · Advanced Materials · doi:10.1002/adma.201304138 · Cited by 6,414
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Nanostructured sulfur cathodes
Yang, Y., Zheng, G., & Cui, Y. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35256g · Cited by 1,947
Graphene/metal oxide composite electrode materials for energy storage
Wu, Z.-S., Zhou, G., Yin, L.-C., Ren, W., Li, F., & Cheng, H.-M. (2012) · Nano Energy · doi:10.1016/j.nanoen.2011.11.001 · Cited by 1,836
Liquid electrolyte lithium/sulfur battery: Fundamental chemistry, problems, and solutions
Zhang, S. S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.12.102 · Cited by 1,592
Ti3C2 MXene as a High Capacity Electrode Material for Metal (Li, Na, K, Ca) Ion Batteries
Er, D., Li, J., Naguib, M., Gogotsi, Y., & Shenoy, V. B. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am501144q · Cited by 1,528
Monolithic Carbide-Derived Carbon Films for Micro-Supercapacitors
Chmiola, J., Largeot, C., Taberna, P.-L., Simon, P., & Gogotsi, Y. (2010) · Science · doi:10.1126/science.1184126 · Cited by 1,325
Sulfur Cathodes Based on Conductive MXene Nanosheets for High‐Performance Lithium–Sulfur Batteries
Liang, X., Garsuch, A., & Nazar, L. F. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410174 · Cited by 1,201
Fabrication of carbon nanorods and graphene nanoribbons from a metal–organic framework
Pachfule, P., Shinde, D., Majumder, M., & Xu, Q. (2016) · Nature Chemistry · doi:10.1038/nchem.2515 · Cited by 1,143
Electrochemical energy storage in a sustainable modern society
Goodenough, J. B. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42613k · Cited by 1,073
Chaikittisilp, W., Ariga, K., & Yamauchi, Y. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00278g · Cited by 828
MOF-Derived Hierarchically Porous Carbon with Exceptional Porosity and Hydrogen Storage Capacity
Yang, S. J., Kim, T., Im, J. H., Kim, Y. S., Lee, K., Jung, H., & Park, C. R. (2012) · Chemistry of Materials · doi:10.1021/cm202554j · Cited by 749
Synthesis of Two-Dimensional Materials by Selective Extraction
Naguib, M., & Gogotsi, Y. (2015) · Accounts of Chemical Research · doi:10.1021/ar500346b · Cited by 743
Functional materials derived from open framework templates/precursors: synthesis and applications
Sun, J.-K., & Xu, Q. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00517a · Cited by 687
Enhanced Electrochemical Kinetics on Conductive Polar Mediators for Lithium–Sulfur Batteries
Peng, H., Zhang, G., Chen, X., Zhang, Z., Xu, W., Huang, J., & Zhang, Q. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201605676 · Cited by 649
Cathode Composites for Li–S Batteries via the Use of Oxygenated Porous Architectures
Demir-Cakan, R., Morcrette, M., Nouar, F., Davoisne, C., Devic, T., Gonbeau, D., Dominko, R., Serre, C., Férey, G., & Tarascon, J.-M. (2011) · Journal of the American Chemical Society · doi:10.1021/ja2062659 · Cited by 630
A graphene foam electrode with high sulfur loading for flexible and high energy Li-S batteries
Zhou, G., Li, L., Ma, C., Wang, S., Shi, Y., Koratkar, N., Ren, W., Li, F., & Cheng, H.-M. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.11.025 · Cited by 570
Liu, H., Li, W., Shen, D., Zhao, D., & Wang, G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b08743 · Cited by 558
Self-citationLithium batteries: To the limits of lithium
Evarts, E. C. (2015) · Nature · doi:10.1038/526s93a · Cited by 501
Chemically Bonded Phosphorus/Graphene Hybrid as a High Performance Anode for Sodium-Ion Batteries
Song, J., Yu, Z., Gordin, M. L., Hu, S., Yi, R., Tang, D., Walter, T., Regula, M., Choi, D., Li, X., et al. (2014) · Nano Letters · doi:10.1021/nl502759z · Cited by 490
Novel gel polymer electrolyte for high-performance lithium–sulfur batteries
Liu, M., Zhou, D., He, Y.-B., Fu, Y., Qin, X., Miao, C., Du, H., Li, B., Yang, Q.-H., Lin, Z., et al. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.02.008 · Cited by 465
A lithium anode protection guided highly-stable lithium–sulfur battery
Ma, G., Wen, Z., Wu, M., Shen, C., Wang, Q., Jin, J., & Wu, X. (2014) · Chem. Commun. · doi:10.1039/c4cc05535g · Cited by 382
Xi, K., Cao, S., Peng, X., Ducati, C., Vasant Kumar, R., & Cheetham, A. K. (2013) · Chemical Communications · doi:10.1039/c3cc38009b · Cited by 376
A Graphene Foam Electrode with High Sulfur Loading for Flexible and High-Energy Li–S Batteries
Zhou, G. (2017) · Springer Theses · doi:10.1007/978-981-10-3406-0_6 · Cited by 344
An Advanced Lithium‐Sulfur Battery
Kim, J., Lee, D. J., Jung, H., Sun, Y., Hassoun, J., & Scrosati, B. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200689 · Cited by 329
Xu, G., Ding, B., Shen, L., Nie, P., Han, J., & Zhang, X. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta00004d · Cited by 284
Cu2(OH)PO4, a Near‐Infrared‐Activated Photocatalyst
Wang, G., Huang, B., Ma, X., Wang, Z., Qin, X., Zhang, X., Dai, Y., & Whangbo, M. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201301306 · Cited by 255
Self-citationAcacia Senegal–Inspired Bifunctional Binder for Longevity of Lithium–Sulfur Batteries
Li, G., Ling, M., Ye, Y., Li, Z., Guo, J., Yao, Y., Zhu, J., Lin, Z., & Zhang, S. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500878 · Cited by 250
Advanced engineering of nanostructured carbons for lithium–sulfur batteries
Wang, J.-G., Xie, K., & Wei, B. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.05.006 · Cited by 247
Mesoporous metal–organic frameworks: design and applications
Song, L., Zhang, J., Sun, L., Xu, F., Li, F., Zhang, H., Si, X., Jiao, C., Li, Z., Liu, S., et al. (2012) · Energy & Environmental Science · doi:10.1039/c2ee03517k · Cited by 238
Gong, S., Chen, Y., Luo, J., Yang, C., Zhong, C., Qin, J., & Ma, D. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002066 · Cited by 230
Chen, S., Zhao, Y., Sun, B., Ao, Z., Xie, X., Wei, Y., & Wang, G. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am508136k · Cited by 177
Self-citationChen, S., Bao, P., Huang, X., Sun, B., & Wang, G. (2014) · Nano Research · doi:10.1007/s12274-013-0374-y · Cited by 174
Self-citationCNT@Cu3(BTC)2 and Metal–Organic Frameworks for Separation of CO2/CH4 Mixture
Xiang, Z., Peng, X., Cheng, X., Li, X., & Cao, D. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp206959k · Cited by 164
Sulphur back in vogue for batteries
Noorden, R. V. (2013) · Nature · doi:10.1038/498416a · Cited by 136
Graphene-like carbide derived carbon for high-power supercapacitors
Gao, P., Tsai, W., Daffos, B., Taberna, P., Pérez, C. R., Gogotsi, Y. G., Simon, P., & Favier, F. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.12.017 · Cited by 132
Multi-shelled hollow carbon nanospheres for lithium–sulfur batteries with superior performances
Chen, S., Huang, X., Sun, B., Zhang, J., Liu, H., & Wang, G. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta03877k · Cited by 122
Self-citationSynthesis of Carbon/Sulfur Nanolaminates by Electrochemical Extraction of Titanium from Ti 2 SC
Zhao, M., Sedran, M., Ling, Z., Lukatskaya, M. R., Mashtalir, O., Ghidiu, M., Dyatkin, B., Tallman, D. J., Djenizian, T., Barsoum, M. W., et al. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201500110 · Cited by 122
Bao, W., Zhang, Z., Zhou, C., Lai, Y., & Li, J. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.09.132 · Cited by 107
Self-citation
Cited by
Recent Advances in Layered Ti3C2Tx MXene for Electrochemical Energy Storage
Xiong, D., Li, X., Bai, Z., & Lu, S. (2018) · Small · doi:10.1002/smll.201703419 · Cited by 1,006
Hong Ng, V. M., Huang, H., Zhou, K., Lee, P. S., Que, W., Xu, J. Z., & Kong, L. B. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta06772g · Cited by 784
Bao, W., Liu, L., Wang, C., Choi, S., Wang, D., & Wang, G. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702485 · Cited by 745
Self-citationRevisiting the Role of Polysulfides in Lithium–Sulfur Batteries
Li, G., Wang, S., Zhang, Y., Li, M., Chen, Z., & Lu, J. (2018) · Advanced Materials · doi:10.1002/adma.201705590 · Cited by 711
Nanoengineering of 2D MXene‐Based Materials for Energy Storage Applications
Nan, J., Guo, X., Xiao, J., Li, X., Chen, W., Wu, W., Liu, H., Wang, Y., Wu, M., & Wang, G. (2021) · Small · doi:10.1002/smll.201902085 · Cited by 685
Self-citation
Metadata
- Authors
- Bao, W., Su, D., Zhang, W., Guo, X., & Wang, G.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2016-10-31
- Volume
- 26
- Issue
- 47
- Pages
- 8746-8756
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2542162402
- Cited by
- 255
- References
- 45
- FWCI
- 15.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.