The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Copper(I) Thiocyanate (CuSCN) Hole‐Transport Layers Processed from Aqueous Precursor Solutions and Their Application in Thin‐Film Transistors and Highly Efficient Organic and Organometal Halide Perovskite Solar Cells
Open accessAbstract
This study reports the development of copper(I) thiocyanate (CuSCN) hole‐transport layers (HTLs) processed from aqueous ammonia as a novel alternative to conventional n‐alkyl sulfide solvents. Wide bandgap (3.4–3.9 eV) and ultrathin (3–5 nm) layers of CuSCN are formed when the aqueous CuSCN–ammine complex solution is spin‐cast in air and annealed at 100 °C. X‐ray photoelectron spectroscopy confirms the high compositional purity of the formed CuSCN layers, while the high‐resolution valence band spectra agree with first‐principles calculations. Study of the hole‐transport properties using field‐effect transistor measurements reveals that the aqueous‐processed CuSCN layers exhibit a fivefold higher hole mobility than films processed from diethyl sulfide solutions with the maximum values approaching 0.1 cm 2 V−1 s−1. A further interesting characteristic is the low surface roughness of the resulting CuSCN layers, which in the case of solar cells helps to planarize the indium tin oxide anode. Organic bulk heterojunction and planar organometal halide perovskite solar cells based on aqueous‐processed CuSCN HTLs yield power conversion efficiency of 10.7% and 17.5%, respectively. Importantly, aqueous‐processed CuSCN‐based cells consistently outperform devices based on poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate HTLs. This is the first report on CuSCN films and devices processed via an aqueous‐based synthetic route that is compatible with high‐throughput manufacturing and paves the way for further developments.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
QUANTUM ESPRESSO: a modular and open-source software project for quantum simulations of materials
Giannozzi, P., Baroni, S., Bonini, N., Calandra, M., Car, R., Cavazzoni, C., Ceresoli, D., Chiarotti, G. L., Cococcioni, M., Dabo, I., et al. (2009) · Journal of Physics: Condensed Matter · doi:10.1088/0953-8984/21/39/395502 · Cited by 29,281
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Atomic subshell photoionization cross sections and asymmetry parameters: 1 ⩽ Z ⩽ 103
Yeh, J. J., & Lindau, I. (1985) · Atomic Data and Nuclear Data Tables · doi:10.1016/0092-640x(85)90016-6 · Cited by 4,978
Metal-halide perovskites for photovoltaic and light-emitting devices
Stranks, S. D., & Snaith, H. J. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2015.90 · Cited by 3,392
X-ray photoelectron studies on some oxides and hydroxides of cobalt, nickel, and copper
McIntyre, N. S., & Cook, M. G. (1975) · Analytical Chemistry · doi:10.1021/ac60363a034 · Cited by 1,837
Bi, C., Wang, Q., Shao, Y., Yuan, Y., Xiao, Z., & Huang, J. (2015) · Nature Communications · doi:10.1038/ncomms8747 · Cited by 1,660
Irwin, M. D., Buchholz, D. B., Hains, A. W., Chang, R. P. H., & Marks, T. J. (2008) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0711990105 · Cited by 1,350
Very-high-efficiency double-heterostructure copper phthalocyanine/C60 photovoltaic cells
Peumans, P., & Forrest, S. R. (2001) · Applied Physics Letters · doi:10.1063/1.1384001 · Cited by 1,044
Inorganic hole conductor-based lead halide perovskite solar cells with 12.4% conversion efficiency
Qin, P., Tanaka, S., Ito, S., Tetreault, N., Manabe, K., Nishino, H., Nazeeruddin, M. K., & Grätzel, M. (2014) · Nature Communications · doi:10.1038/ncomms4834 · Cited by 894
Benefits of very thin PCBM and LiF layers for solution-processed p–i–n perovskite solar cells
Seo, J., Park, S., Chan Kim, Y., Jeon, N. J., Noh, J. H., Yoon, S. C., & Seok, S. I. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01216j · Cited by 677
Review on application of PEDOTs and PEDOT:PSS in energy conversion and storage devices
Sun, K., Zhang, S., Li, P., Xia, Y., Zhang, X., Du, D., Isikgor, F. H., & Ouyang, J. (2015) · Journal of Materials Science: Materials in Electronics · doi:10.1007/s10854-015-2895-5 · Cited by 648
CuSCN-Based Inverted Planar Perovskite Solar Cell with an Average PCE of 15.6%
Ye, S., Sun, W., Li, Y., Yan, W., Peng, H., Bian, Z., Liu, Z., & Huang, C. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00116 · Cited by 564
Park, J. H., Seo, J., Park, S., Shin, S. S., Kim, Y. C., Jeon, N. J., Shin, H., Ahn, T. K., Noh, J. H., Yoon, S. C., et al. (2015) · Advanced Materials · doi:10.1002/adma.201500523 · Cited by 550
Electrodeposited Nanocomposite n-p Heterojunctions for Solid-State Dye-Sensitized Photovoltaics
O’Regan, B., Schwartz, D. T., Zakeeruddin, S. M., & Grätzel, M. (2000) · Advanced Materials · doi:10.1002/1521-4095(200009)12:17<1263::aid-adma1263>3.0.co;2-t · Cited by 417
Tremolet de Villers, B. J., O’Hara, K. A., Ostrowski, D. P., Biddle, P. H., Shaheen, S. E., Chabinyc, M. L., Olson, D. C., & Kopidakis, N. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04346 · Cited by 277
Photodetectors based on treated CdSe quantum-dot films
Oertel, D. C., Bawendi, M. G., Arango, A. C., & Bulović, V. (2005) · Applied Physics Letters · doi:10.1063/1.2136227 · Cited by 260
Jung, J. W., Chueh, C., & Jen, A. K. ‐. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500486 · Cited by 256
Pattanasattayavong, P., Yaacobi‐Gross, N., Zhao, K., Ndjawa, G. O. N., Li, J., Yan, F., O'Regan, B. C., Amassian, A., & Anthopoulos, T. D. (2013) · Advanced Materials · doi:10.1002/adma.201202758 · Cited by 222
Self-citationPattanasattayavong, P., Ndjawa, G. O. N., Zhao, K., Chou, K. W., Yaacobi-Gross, N., O'Regan, B. C., Amassian, A., & Anthopoulos, T. D. (2013) · Chem. Commun. · doi:10.1039/c2cc37065d · Cited by 192
Self-citationOrgano-metal halide perovskite-based solar cells with CuSCN as the inorganic hole selective contact
Chavhan, S. D., Miguel, O., Grande, H., Pedro, V. G., Sánchez, R. S., Barea, E. M., Mora‐Seró, I., & Tena‐Zaera, R. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta01310g · Cited by 190
Ye, S., Rao, H., Yan, W., Li, Y., Sun, W., Peng, H., Liu, Z., Bian, Z., Li, Y., & Huang, C. (2016) · Advanced Materials · doi:10.1002/adma.201603850 · Cited by 180
Yaacobi‐Gross, N., Treat, N. D., Pattanasattayavong, P., Faber, H., Perumal, A. K., Stingelin, N., Bradley, D. D. C., Stavrinou, P. N., Heeney, M., & Anthopoulos, T. D. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401529 · Cited by 172
Self-citationImprovement of Interfacial Contacts for New Small‐Molecule Bulk‐Heterojunction Organic Photovoltaics
García, A. A., Welch, G. C., Ratcliff, E. L., Ginley, D. S., Bazan, G. C., & Olson, D. C. (2012) · Advanced Materials · doi:10.1002/adma.201200963 · Cited by 145
Generation of XPS Auger lines by bremsstrahlung
Wagner, C. D., & Taylor, J. A. (1980) · Journal of Electron Spectroscopy and Related Phenomena · doi:10.1016/0368-2048(80)85008-0 · Cited by 131
Pattanasattayavong, P., Mottram, A. D., Yan, F., & Anthopoulos, T. D. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201502953 · Cited by 73
Self-citationTreat, N. D., Yaacobi‐Gross, N., Faber, H. A., Perumal, A. K., Bradley, D. D. C., Stingelin, N., & Anthopoulos, T. D. (2015) · Applied Physics Letters · doi:10.1063/1.4926408 · Cited by 63
Self-citationVicente, J., & Dı́az, M. (2003) · Environmental Science & Technology · doi:10.1021/es020103c · Cited by 37
Chaudhary, R., Chaudhary, R., Kesari, J. P., & Patra, A. (2017) · Optical Materials · doi:10.1016/j.optmat.2017.04.063 · Cited by 28
Fabrication of p-type CuSCN/n-type micro-structured ZnO heterojunction structures
Bacaksız, E., Aksu, S., Çankaya, G., Yılmaz, S., Polat, İ., Küçükömeroğlu, T., & Varilci, A. (2011) · Thin Solid Films · doi:10.1016/j.tsf.2011.01.254 · Cited by 23
Cited by
17% Efficient Organic Solar Cells Based on Liquid Exfoliated WS2 as a Replacement for PEDOT:PSS
Lin, Y., Adilbekova, B., Firdaus, Y., Yengel, E., Faber, H., Sajjad, M., Zheng, X., Yarali, E., Seitkhan, A., Bakr, O. M., et al. (2019) · Advanced Materials · doi:10.1002/adma.201902965 · Cited by 586
Self-citationYin, X., Song, Z., Li, Z., & Tang, W. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02337j · Cited by 388
Semitransparent organic photovoltaics for building-integrated photovoltaic applications
Li, Y., Huang, X., Sheriff, H. K. M., & Forrest, S. R. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00514-0 · Cited by 335
A Review of Inorganic Hole Transport Materials for Perovskite Solar Cells
Kung, P., Li, M., Lin, P., Chiang, Y., Chan, C., Guo, T., & Chen, P. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201800882 · Cited by 293
Unveiling the Role of tBP–LiTFSI Complexes in Perovskite Solar Cells
Wang, S., Huang, Z., Wang, X., Li, Y., Günther, M., Valenzuela, S., Parikh, P., Cabreros, A., Xiong, W., & Meng, Y. S. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b09809 · Cited by 292
Metadata
- Authors
- Wijeyasinghe, N., Regoutz, A., Eisner, F., Du, T., Tsetseris, L., Lin, Y., Faber, H., Pattanasattayavong, P., Li, J., Yan, F., McLachlan, M. A., Payne, D. J., Heeney, M., & Anthopoulos, T. D.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2017-07-28
- Volume
- 27
- Issue
- 35
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2742158115
- Cited by
- 261
- References
- 31
- FWCI
- 12.87
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.