The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Direct 3D Printing of High Strength Biohybrid Gradient Hydrogel Scaffolds for Efficient Repair of Osteochondral Defect
Abstract
The emerging 3D printing technique allows for tailoring hydrogel‐based soft structure tissue scaffolds for individualized therapy of osteochondral defects. However, the weak mechanical strength and uncontrollable swelling intrinsic to conventional hydrogels restrain their use as bioinks. Here, a high‐strength thermoresponsive supramolecular copolymer hydrogel is synthesized by one‐step copolymerization of dual hydrogen bonding monomers, N‐acryloyl glycinamide, and N‐[tris(hydroxymethyl)methyl] acrylamide. The obtained copolymer hydrogels demonstrate excellent mechanical properties—robust tensile strength (up to 0.41 MPa), large stretchability (up to 860%), and high compressive strength (up to 8.4 MPa). The rapid thermoreversible gel ⇔ sol transition behavior makes this copolymer hydrogel suitable for direct 3D printing. Successful preparation of 3D‐printed biohybrid gradient hydrogel scaffolds is demonstrated with controllable 3D architecture, owing to shear thinning property which allows continuous extrusion through a needle and also immediate gelation of fluid upon deposition on the cooled substrate. Furthermore, this biohybrid gradient hydrogel scaffold printed with transforming growth factor beta 1 and β‐tricalciumphosphate on distinct layers facilitates the attachment, spreading, and chondrogenic and osteogenic differentiation of human bone marrow stem cells (hBMSCs) in vitro. The in vivo experiments reveal that the 3D‐printed biohybrid gradient hydrogel scaffolds significantly accelerate simultaneous regeneration of cartilage and subchondral bone in a rat model.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hunziker, E. B. (2002) · Osteoarthritis and Cartilage · doi:10.1053/joca.2002.0801 · Cited by 1,975
Designing Cell-Compatible Hydrogels for Biomedical Applications
Seliktar, D. (2012) · Science · doi:10.1126/science.1214804 · Cited by 1,923
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Bone Tissue Engineering: State of the Art and Future Trends
Salgado, A. J., Coutinho, O. P., & Reis, R. L. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400026 · Cited by 1,681
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Review: tissue engineering for regeneration of articular cartilage
Temenoff, J. S., & Mikos, A. G. (2000) · Biomaterials · doi:10.1016/s0142-9612(99)00213-6 · Cited by 1,052
3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures
Hong, S., Sycks, D., Chan, H. F., Lin, S., Lopez, G. P., Guilak, F., Leong, K. W., & Zhao, X. (2015) · Advanced Materials · doi:10.1002/adma.201501099 · Cited by 873
Dai, X., Zhang, Y., Gao, L., Bai, T., Wang, W., Cui, Y., & Liu, W. (2015) · Advanced Materials · doi:10.1002/adma.201500534 · Cited by 848
Self-citationBio-ink properties and printability for extrusion printing living cells
Chung, J. H. Y., Naficy, S., Yue, Z., Kapsa, R., Quigley, A., Moulton, S. E., & Wallace, G. G. (2013) · Biomaterials Science · doi:10.1039/c3bm00012e · Cited by 610
Cited by
Materials design for bone-tissue engineering
Koons, G. L., Diba, M., & Mikos, A. G. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0204-2 · Cited by 1,699
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
3D printing of bone tissue engineering scaffolds
Wang, C., Huang, W., Zhou, Y., He, L., He, Z., Chen, Z., He, X., Tian, S., Liao, J., Lu, B., et al. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.01.004 · Cited by 661
“produced hydrogel scaffolds with gradient composition/structure and excellent mechanical strength through direct 3D printing [48].”
BackgroundDeng, Z., Hu, T., Lei, Q., He, J., Ma, P. X., & Guo, B. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b20178 · Cited by 486
Extrusion 3D Printing of Polymeric Materials with Advanced Properties
Jiang, Z., Diggle, B., Tan, M. L., Viktorova, J., Bennett, C. W., & Connal, L. A. (2020) · Advanced Science · doi:10.1002/advs.202001379 · Cited by 408
3D Printing of Multifunctional Hydrogels
Chen, Z., Zhao, D., Liu, B., Nian, G., Li, X., Yin, J., Qu, S., & Yang, W. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900971 · Cited by 398
Self-citationGao, F., Xu, Z., Liang, Q., Li, H., Peng, L., Wu, M., Zhao, X., Cui, X., Ruan, C., & Liu, W. (2019) · Advanced Science · doi:10.1002/advs.201900867 · Cited by 365
Self-citationTissue Engineering and Regenerative Medicine: Achievements, Future, and Sustainability in Asia
Han, F., Wang, J., Ding, L., Hu, Y., Li, W., Yuan, Z., Guo, Q., Zhu, C., Yu, L., Wang, H., et al. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.00083 · Cited by 357
Bioprinting: From Tissue and Organ Development to in Vitro Models
Mota, C., Camarero-Espinosa, S., Baker, M. B., Wieringa, P., & Moroni, L. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00789 · Cited by 345
Articular cartilage and osteochondral tissue engineering techniques: Recent advances and challenges
Wei, W., & Dai, H. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.05.011 · Cited by 327
Long, T., Li, Y., Fang, X., & Sun, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201804416 · Cited by 283
Bioinspired mineralized collagen scaffolds for bone tissue engineering
Li, Z., Du, T., Ruan, C., & Niu, X. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.11.004 · Cited by 272
Self-citationLiu, Y., Zhu, Z., Pei, X., Zhang, X., Cheng, X., Hu, S., Gao, X., Wang, J., Chen, J., & Wan, Q. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c12090 · Cited by 259
Recent advances in regenerative biomaterials
Cao, D., & Ding, J. (2022) · Regenerative Biomaterials · doi:10.1093/rb/rbac098 · Cited by 259
Li, Q., Xu, S., Feng, Q., Dai, Q., Yao, L., Zhang, Y., Gao, H., Dong, H., Chen, D., & Cao, X. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.03.013 · Cited by 231
Self-citationResearch Progress of Shape Memory Polymer and 4D Printing in Biomedical Application
Zhao, W., Yue, C., Liu, L., Liu, Y., & Leng, J. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202201975 · Cited by 183
Design, printing, and engineering of regenerative biomaterials for personalized bone healthcare
Jia, Z., Xu, X., Zhu, D., & Zheng, Y. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101072 · Cited by 176
The tissue origin effect of extracellular vesicles on cartilage and bone regeneration
Li, Q., Yu, H., Sun, M., Yang, P., Hu, X., Ao, Y., & Cheng, J. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.02.039 · Cited by 172
Metadata
- Authors
- Gao, F., Xu, Z., Liang, Q., Liu, B., Li, H., Wu, Y., Zhang, Y., Lin, Z., Wu, M., Ruan, C., & Liu, W.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2018-01-17
- Volume
- 28
- Issue
- 13
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2791490000
- Cited by
- 330
- References
- 42
- FWCI
- 14.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.