The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Direct 3D Printing of High Strength Biohybrid Gradient Hydrogel Scaffolds for Efficient Repair of Osteochondral Defect
Abstract
The emerging 3D printing technique allows for tailoring hydrogel‐based soft structure tissue scaffolds for individualized therapy of osteochondral defects. However, the weak mechanical strength and uncontrollable swelling intrinsic to conventional hydrogels restrain their use as bioinks. Here, a high‐strength thermoresponsive supramolecular copolymer hydrogel is synthesized by one‐step copolymerization of dual hydrogen bonding monomers, N‐acryloyl glycinamide, and N‐[tris(hydroxymethyl)methyl] acrylamide. The obtained copolymer hydrogels demonstrate excellent mechanical properties—robust tensile strength (up to 0.41 MPa), large stretchability (up to 860%), and high compressive strength (up to 8.4 MPa). The rapid thermoreversible gel ⇔ sol transition behavior makes this copolymer hydrogel suitable for direct 3D printing. Successful preparation of 3D‐printed biohybrid gradient hydrogel scaffolds is demonstrated with controllable 3D architecture, owing to shear thinning property which allows continuous extrusion through a needle and also immediate gelation of fluid upon deposition on the cooled substrate. Furthermore, this biohybrid gradient hydrogel scaffold printed with transforming growth factor beta 1 and β‐tricalciumphosphate on distinct layers facilitates the attachment, spreading, and chondrogenic and osteogenic differentiation of human bone marrow stem cells (hBMSCs) in vitro. The in vivo experiments reveal that the 3D‐printed biohybrid gradient hydrogel scaffolds significantly accelerate simultaneous regeneration of cartilage and subchondral bone in a rat model.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hunziker, E. B. (2002) · Osteoarthritis and Cartilage · doi:10.1053/joca.2002.0801 · Cited by 1,975
Designing Cell-Compatible Hydrogels for Biomedical Applications
Seliktar, D. (2012) · Science · doi:10.1126/science.1214804 · Cited by 1,923
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Bone Tissue Engineering: State of the Art and Future Trends
Salgado, A. J., Coutinho, O. P., & Reis, R. L. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400026 · Cited by 1,681
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Review: tissue engineering for regeneration of articular cartilage
Temenoff, J. S., & Mikos, A. G. (2000) · Biomaterials · doi:10.1016/s0142-9612(99)00213-6 · Cited by 1,052
3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures
Hong, S., Sycks, D., Chan, H. F., Lin, S., Lopez, G. P., Guilak, F., Leong, K. W., & Zhao, X. (2015) · Advanced Materials · doi:10.1002/adma.201501099 · Cited by 873
Dai, X., Zhang, Y., Gao, L., Bai, T., Wang, W., Cui, Y., & Liu, W. (2015) · Advanced Materials · doi:10.1002/adma.201500534 · Cited by 848
Self-citationBio-ink properties and printability for extrusion printing living cells
Chung, J. H. Y., Naficy, S., Yue, Z., Kapsa, R., Quigley, A., Moulton, S. E., & Wallace, G. G. (2013) · Biomaterials Science · doi:10.1039/c3bm00012e · Cited by 610
3D Printing of Shear-Thinning Hyaluronic Acid Hydrogels with Secondary Cross-Linking
Ouyang, L., Highley, C. B., Rodell, C. B., Sun, W., & Burdick, J. A. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00158 · Cited by 607
Polymers with Upper Critical Solution Temperature in Aqueous Solution
Seuring, J., & Agarwal, S. (2012) · Macromolecular Rapid Communications · doi:10.1002/marc.201200433 · Cited by 570
Hayami, T., Pickarski, M., Wesolowski, G. A., Mclane, J., Bone, A., Destefano, J., Rodan, G. A., & Duong, L. T. (2004) · Arthritis & Rheumatism · doi:10.1002/art.20124 · Cited by 560
Das, S., Pati, F., Choi, Y.-J., Rijal, G., Shim, J.-H., Kim, S. W., Ray, A. R., Cho, D.-W., & Ghosh, S. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.023 · Cited by 553
Recent progress of in situ formed gels for biomedical applications
Ko, D. Y., Shinde, U. P., Yeon, B., & Jeong, B. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.08.002 · Cited by 416
3D Bioprinting of Spatially Heterogeneous Collagen Constructs for Cartilage Tissue Engineering
Rhee, S., Puetzer, J. L., Mason, B. N., Reinhart-King, C. A., & Bonassar, L. J. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00288 · Cited by 364
Du, Y., Liu, H., Yang, Q., Wang, S., Wang, J., Ma, J., Noh, I., Mikos, A. G., & Zhang, S. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.05.021 · Cited by 322
Jin, R., Moreira Teixeira, L. S., Dijkstra, P. J., van Blitterswijk, C. A., Karperien, M., & Feijen, J. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.01.013 · Cited by 298
Double‐Network Hydrogels Strongly Bondable to Bones by Spontaneous Osteogenesis Penetration
Nonoyama, T., Wada, S., Kiyama, R., Kitamura, N., Mredha, M. T. I., Zhang, X., Kurokawa, T., Nakajima, T., Takagi, Y., Yasuda, K., et al. (2016) · Advanced Materials · doi:10.1002/adma.201601030 · Cited by 295
Autonomous self-healing of poly(acrylic acid) hydrogels induced by the migration of ferric ions
Wei, Z., He, J., Liang, T., Oh, H., Athas, J., Tong, Z., Wang, C., & Nie, Z. (2013) · Polymer Chemistry · doi:10.1039/c3py00692a · Cited by 287
A clinical review of cartilage repair techniques
Smith, G. D., Knutsen, G., & Richardson, J. B. (2005) · The Journal of Bone and Joint Surgery. British volume · doi:10.1302/0301-620x.87b4.15971 · Cited by 286
Fabrication of viable tissue-engineered constructs with 3D cell-assembly technique
Yan, Y., Wang, X., Pan, Y., Liu, H., Cheng, J., Xiong, Z., Lin, F., Wu, R., Zhang, R., & Lu, Q. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.027 · Cited by 284
Liao, I., Moutos, F. T., Estes, B. T., Zhao, X., & Guilak, F. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201300483 · Cited by 276
Silk microfiber-reinforced silk hydrogel composites for functional cartilage tissue repair
Yodmuang, S., McNamara, S. L., Nover, A. B., Mandal, B. B., Agarwal, M., Kelly, T.-A. N., Chao, P.-H. G., Hung, C., Kaplan, D. L., & Vunjak-Novakovic, G. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.032 · Cited by 262
Zhai, X., Ma, Y., Hou, C., Gao, F., Zhang, Y., Ruan, C., Pan, H., Lu, W. W., & Liu, W. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00224 · Cited by 243
Self-citationDynamically Restructuring Hydrogel Networks Formed with Reversible Covalent Crosslinks
Roberts, M. C., Hanson, M. C., Massey, A. P., Karren, E. A., & Kiser, P. F. (2007) · Advanced Materials · doi:10.1002/adma.200602649 · Cited by 236
A Mineralized High Strength and Tough Hydrogel for Skull Bone Regeneration
Xu, B., Zheng, P., Gao, F., Wang, W., Zhang, H., Zhang, X., Feng, X., & Liu, W. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201604327 · Cited by 178
Self-citationSong, G., Zhao, Z., Peng, X., He, C., Weiss, R. A., & Wang, H. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b01448 · Cited by 154
Yang, F., Tadepalli, V. R., & Wiley, B. J. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00094 · Cited by 145
Gao, F., Zhang, Y., Li, Y., Xu, B., Cao, Z., & Liu, W. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00912 · Cited by 131
Self-citation3D printing of an extremely tough hydrogel
Wei, J., Wang, J., Su, S., Wang, S., Qiu, J., Zhang, Z., Christopher, G. F., Ning, F., & Cong, W. (2015) · RSC Advances · doi:10.1039/c5ra16362e · Cited by 120
pH-Tunable rheological properties of a telechelic cationic polyelectrolyte reversible hydrogel
Bossard, F., Aubry, T., Gotzamanis, G., & Tsitsilianis, C. (2006) · Soft Matter · doi:10.1039/b601435f · Cited by 112
Filardo, G., Vannini, F., Marcacci, M., Andriolo, L., Ferruzzi, A., Giannini, S., & Kon, E. (2012) · The American Journal of Sports Medicine · doi:10.1177/0363546512463675 · Cited by 112
Wang, W., Sun, L. T., Zhang, P., Song, J., & Liu, W. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.08.022 · Cited by 99
Self-citationLam, J., Clark, E. C., Fong, E. L. S., Lee, E. J., Lu, S. Z., Tabata, Y., & Mikos, A. G. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.020 · Cited by 92
A High Strength Self-Healable Antibacterial and Anti-Inflammatory Supramolecular Polymer Hydrogel
Wang, H., Zhu, H. J., Fu, W., Zhang, Y., Xu, B., Gao, F., Cao, Z., & Liu, W. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201600695 · Cited by 81
Self-citationA thermoresponsive supramolecular copolymer hydrogel for the embolization of kidney arteries
Shi, X., Gao, H., Dai, F., Feng, X., & Liu, W. (2016) · Biomaterials Science · doi:10.1039/c6bm00597g · Cited by 47
Self-citation3D-Printed Ultratough Hydrogel Structures with Titin-like Domains
Zhu, F., Cheng, L., Wang, Z. J., Hong, W., Wu, Z. L., Yin, J., Qian, J. W., & Zheng, Q. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b02007 · Cited by 47
Synthesis and Hydrophilicity of Multifunctionally Hydroxylated Poly(acrylamides)
Saito, N., Sugawara, T., & Matsuda, T. (1996) · Macromolecules · doi:10.1021/ma950419n · Cited by 42
Rheology of Poly(N-isopropylacrylamide)–Clay Nanocomposite Hydrogels
Xu, D. E., Bhatnagar, D., Gersappe, D., Sokolov, J. C., Rafailovich, M. H., & Lombardi, J. (2015) · Macromolecules · doi:10.1021/ma502111p · Cited by 40
Yang, J. H., Zhang, X., Ma, M., & Xu, F. (2015) · ACS Macro Letters · doi:10.1021/acsmacrolett.5b00422 · Cited by 40
Zhang, X., Xu, B., Gao, F., Zheng, P., & Liu, W. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb01279a · Cited by 27
Self-citation
Cited by
Materials design for bone-tissue engineering
Koons, G. L., Diba, M., & Mikos, A. G. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0204-2 · Cited by 1,699
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
3D printing of bone tissue engineering scaffolds
Wang, C., Huang, W., Zhou, Y., He, L., He, Z., Chen, Z., He, X., Tian, S., Liao, J., Lu, B., et al. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.01.004 · Cited by 661
Deng, Z., Hu, T., Lei, Q., He, J., Ma, P. X., & Guo, B. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b20178 · Cited by 486
Extrusion 3D Printing of Polymeric Materials with Advanced Properties
Jiang, Z., Diggle, B., Tan, M. L., Viktorova, J., Bennett, C. W., & Connal, L. A. (2020) · Advanced Science · doi:10.1002/advs.202001379 · Cited by 408
Metadata
- Authors
- Gao, F., Xu, Z., Liang, Q., Liu, B., Li, H., Wu, Y., Zhang, Y., Lin, Z., Wu, M., Ruan, C., & Liu, W.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2018-01-17
- Volume
- 28
- Issue
- 13
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2791490000
- Cited by
- 330
- References
- 42
- FWCI
- 14.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.