The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Metal–Organic Frameworks (MOFs)‐Derived Nitrogen‐Doped Porous Carbon Anchored on Graphene with Multifunctional Effects for Lithium–Sulfur Batteries
Abstract
Lithium–sulfur (Li–S) batteries are highly appealing for next‐generation electrochemical energy storage owing to their high theoretical energy density, environmental friendliness, and low cost. However, the insulating nature of sulfur and migration of dissolved polysulfide intermediates lead to low active material utilization and fast capacity decay, which pose a significant challenge to their practical applications. Here, this paper reports a multifunctional carbon hybrid with metal–organic frameworks (MOFs)‐derived nitrogen‐doped porous carbon anchored on graphene sheets (NPC/G) serving as a sulfur host. On the one hand, the high surface area and nitrogen‐doping of the carbon nanoparticles enable effective polysulfide immobilization through both physical confinement and chemical adsorption; on the other hand, the highly conductive graphene provides an interconnected conductive framework to facilitate fast electron transport, improving the sulfur utilization. As a result, the NPC/G‐based sulfur cathode exhibits a high specific capacity of 1372 mAh g−1 with good cycling stability over 300 cycles. This approach provides a promising approach for the design of MOFs‐derived carbon materials for high performance Li–S batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide
Stankovich, S., Dikin, D. A., Piner, R. D., Kohlhaas, K. A., Kleinhammes, A., Jia, Y., Wu, Y., Nguyen, S. T., & Ruoff, R. S. (2007) · Carbon · doi:10.1016/j.carbon.2007.02.034 · Cited by 13,878
Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2016) · Nature Energy · doi:10.1038/nenergy.2016.132 · Cited by 2,167
Nanostructured sulfur cathodes
Yang, Y., Zheng, G., & Cui, Y. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35256g · Cited by 1,947
More Reliable Lithium‐Sulfur Batteries: Status, Solutions and Prospects
Fang, R., Zhao, S., Sun, Z., Wang, D., Cheng, H., & Li, F. (2017) · Advanced Materials · doi:10.1002/adma.201606823 · Cited by 1,785
Self-citationReview on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Zheng, G., Yang, Y., Cha, J. J., Hong, S. S., & Cui, Y. (2011) · Nano Letters · doi:10.1021/nl2027684 · Cited by 1,295
Wu, H. B., & Lou, X. W. (. (2017) · Science Advances · doi:10.1126/sciadv.aap9252 · Cited by 1,103
Stabilizing lithium–sulphur cathodes using polysulphide reservoirs
Ji, X., Evers, S., Black, R., & Nazar, L. F. (2011) · Nature Communications · doi:10.1038/ncomms1293 · Cited by 864
Electrocatalytic Polysulfide Traps for Controlling Redox Shuttle Process of Li–S Batteries
Al Salem, H., Babu, G., V. Rao, C., & Arava, L. M. R. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04472 · Cited by 753
Li, Z., Wu, H. B., & (David) Lou, X. W. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02364a · Cited by 654
A novel synergistic composite with multi-functional effects for high-performance Li–S batteries
Li, Y.-J., Fan, J.-M., Zheng, M.-S., & Dong, Q.-F. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00104a · Cited by 600
Carbon materials for Li–S batteries: Functional evolution and performance improvement
Liang, J., Sun, Z.-H., Li, F., & Cheng, H.-M. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2015.09.007 · Cited by 593
Self-citationLi, Z., Jiang, Y., Yuan, L., Yi, Z., Wu, C., Liu, Y., Strasser, P., & Huang, Y. (2014) · ACS Nano · doi:10.1021/nn503220h · Cited by 590
Peng, H., Huang, J., Zhao, M., Zhang, Q., Cheng, X., Liu, X., Qian, W., & Wei, F. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201303296 · Cited by 552
Entrapment of Polysulfides by a Black‐Phosphorus‐Modified Separator for Lithium–Sulfur Batteries
Sun, J., Sun, Y., Pasta, M., Zhou, G., Li, Y., Liu, W., Xiong, F., & Cui, Y. (2016) · Advanced Materials · doi:10.1002/adma.201602172 · Cited by 516
Structural Design of Cathodes for Li‐S Batteries
Pope, M. A., & Aksay, I. A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500124 · Cited by 500
Li, Z., Li, C., Ge, X., Ma, J., Zhang, Z., Li, Q., Wang, C., & Yin, L. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.02.049 · Cited by 449
Investigations of lithium–sulfur batteries using electrochemical impedance spectroscopy
Cañas, N. A., Hirose, K., Pascucci, B., Wagner, N., Friedrich, K. A., & Hiesgen, R. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.02.101 · Cited by 415
Yin, L.-C., Liang, J., Zhou, G.-M., Li, F., Saito, R., & Cheng, H.-M. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.04.053 · Cited by 412
Self-citationA Graphene-like Oxygenated Carbon Nitride Material for Improved Cycle-Life Lithium/Sulfur Batteries
Liu, J., Li, W., Duan, L., Li, X., Ji, L., Geng, Z., Huang, K., Lu, L., Zhou, L., Liu, Z., et al. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01919 · Cited by 401
Tang, C., Li, B., Zhang, Q., Zhu, L., Wang, H., Shi, J., & Wei, F. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201503726 · Cited by 388
Embedding Sulfur in MOF‐Derived Microporous Carbon Polyhedrons for Lithium–Sulfur Batteries
Wu, H. B., Wei, S., Zhang, L., Xu, R., Hng, H. H., & Lou, X. W. (. (2013) · Chemistry – A European Journal · doi:10.1002/chem.201301689 · Cited by 386
Yu, M., Ma, J., Song, H., Wang, A., Tian, F., Wang, Y., Qiu, H., & Wang, R. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03902a · Cited by 345
Highly Reversible Lithium/Dissolved Polysulfide Batteries with Carbon Nanotube Electrodes
Fu, Y., Su, Y., & Manthiram, A. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201301250 · Cited by 334
A Compact Nanoconfined Sulfur Cathode for High-Performance Lithium-Sulfur Batteries
Li, Z., Guan, B. Y., Zhang, J., & Lou, X. W. (. (2017) · Joule · doi:10.1016/j.joule.2017.06.003 · Cited by 295
Cathode materials for lithium–sulfur batteries: a practical perspective
Eftekhari, A., & Kim, D.-W. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00799j · Cited by 285
A Toolbox for Lithium–Sulfur Battery Research: Methods and Protocols
Zhang, G., Zhang, Z., Peng, H., Huang, J., & Zhang, Q. (2017) · Small Methods · doi:10.1002/smtd.201700134 · Cited by 260
Yuan, H., Zhang, W., Wang, J.-G., Zhou, G., Zhuang, Z., Luo, J., Huang, H., Gan, Y., Liang, C., Xia, Y., et al. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.07.015 · Cited by 245
Chen, T., Cheng, B., Zhu, G., Chen, R., Hu, Y., Ma, L., Lv, H., Wang, Y., Liang, J., Tie, Z., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04433 · Cited by 237
Graphene–Li2S–Carbon Nanocomposite for Lithium–Sulfur Batteries
Wu, F., Lee, J. T., Zhao, E., Zhang, B., & Yushin, G. (2016) · ACS Nano · doi:10.1021/acsnano.5b06716 · Cited by 167
Rational Design of Cathode Structure for High Rate Performance Lithium–Sulfur Batteries
Chen, H., Wang, C., Dai, Y., Qiu, S., Yang, J., Lu, W., & Chen, L. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01837 · Cited by 159
Zhang, M., Yu, C., Zhao, C., Song, X., Han, X., Liu, S., Hao, C., & Qiu, J. (2016) · Energy storage materials · doi:10.1016/j.ensm.2016.04.002 · Cited by 156
Leaf‐Like Graphene‐Oxide‐Wrapped Sulfur for High‐Performance Lithium–Sulfur Battery
Yuan, S., Guo, Z., Wang, L., Hu, S., Wang, Y., & Xia, Y. (2015) · Advanced Science · doi:10.1002/advs.201500071 · Cited by 120
Functionalized Graphene‐Based Cathode for Highly Reversible Lithium–Sulfur Batteries
Kim, J. W., Ocon, J. D., Park, D., & Lee, J. (2014) · ChemSusChem · doi:10.1002/cssc.201300782 · Cited by 57
Tan, Y., Jia, Z., Lou, P., Cui, Z., & Guo, X. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.11.114 · Cited by 48
Biomass-derived Activated Carbon for Rechargeable Lithium-Sulfur Batteries
Liu, M., Chen, Y., Chen, K., Zhang, N., Zhao, X., Zhao, F., Dou, Z., He, X., & Wang, L. (2014) · BioResources · doi:10.15376/biores.10.1.155-168 · Cited by 45
Self-citation
Cited by
Metal-Organic Frameworks for Batteries
Zhao, R., Liang, Z., Zou, R., & Xu, Q. (2018) · Joule · doi:10.1016/j.joule.2018.09.019 · Cited by 670
Current Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
Metal-organic framework-derived materials for electrochemical energy applications
Liang, Z., Zhao, R., Qiu, T., Zou, R., & Xu, Q. (2019) · EnergyChem · doi:10.1016/j.enchem.2019.100001 · Cited by 549
Host Materials Anchoring Polysulfides in Li–S Batteries Reviewed
Zhou, L., Danilov, D. L., Eichel, R., & Notten, P. H. L. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202001304 · Cited by 516
Metal–Organic Frameworks (MOFs) and MOF-Derived Materials for Energy Storage and Conversion
Zhang, X., Chen, A., Zhong, M., Zhang, Z., Zhang, X., Zhou, Z., & Bu, X.-H. (2019) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0024-x · Cited by 481
Metadata
- Authors
- Chen, K., Sun, Z., Fang, R., Shi, Y., Cheng, H., & Li, F.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2018-02-22
- Volume
- 28
- Issue
- 38
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2791823481
- Cited by
- 339
- References
- 37
- FWCI
- 22.30
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.