Cited by 282Hydrogels: synthesis, properties, applications3D Printing in Biomedical ResearchCollagen: Extraction and Characterization

The DOI matches its Crossref record; 131 of the 137 references it cites were found in a registry or an index.

Gelatin Methacryloyl Hydrogel, from Standardization, Performance, to Biomedical Application

He, Jing, Sun, Yuan, Gao, Qing, He, Chanfan, Yao, Ke, Wang, Tongyao, Xie, Mingjun, Yu, Kang, Nie, Jing, Chen, Yuewei, He, Yong·2023·Advanced Healthcare Materials

DOI 10.1002/adhm.202300395

Open this paper in CoChat — free account

Abstract

Gelatin methacryloyl (GelMA), a photocurable hydrogel, is widely used in 3D culture, particularly in 3D bioprinting, due to its high biocompatibility, tunable physicochemical properties, and excellent formability. However, as the properties and performances of GelMA vary under different synthetic conditions, there is a lack of standardization, leading to conflicting results. In this study, a uniform standard is established to understand and enhance GelMA applications. First, the basic concept of GelMA and the density of the molecular network (DMN) are defined. Second, two properties, degrees of substitution and ratio of solid content, as the main measurable parameters determining the DMN are used. Third, the mechanisms and relationships between DMN and its performance in various applications in terms of porosity, viscosity, formability, mechanical strength, swelling, biodegradation, and cytocompatibility are theoretically explained. The main questions that are answered: what does performance mean, why is it important, how to optimize the basic parameters to improve the performance, and how to characterize it reasonably and accurately? Finally, it is hoped that this knowledge will eliminate the need for researchers to conduct tedious and repetitive pre-experiments, enable easy communication for achievements between groups under the same standard, and fully explore the potential of the GelMA hydrogel.

Integrity signals

Registry

Crossref · 10.1002/adhm.202300395

Cites

131 of 131 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Matrix elasticity directs stem cell lineage specification
Engler, A. J., Sen, S., Sweeney, H. L., & Discher, D. E. (2006) · Cell · doi:10.1016/j.cell.2006.06.044 · Cited by 13,915
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. L. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,639
Neutrophil recruitment and function in health and inflammation
Kolaczkowska, E., & Kubes, P. (2013) · Nature Reviews Immunology · doi:10.1038/nri3399 · Cited by 5,472
Macrophage plasticity, polarization, and function in health and disease
Shapouri‐Moghaddam, A., Mohammadian, S., Vazini, H., Taghadosi, M., Esmaeili, S., Mardani, F., Seifi, B., Mohammadi, A., Afshari, J. T., & Sahebkar, A. (2018) · Journal of Cellular Physiology · doi:10.1002/jcp.26429 · Cited by 4,930
Statistical Mechanics of Cross-Linked Polymer Networks II. Swelling
Flory, P. J., & Rehner, J. (1943) · The Journal of Chemical Physics · doi:10.1063/1.1723792 · Cited by 3,972
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
Yue, K., Trujillo-de Santiago, G., Alvarez, M. M., Tamayol, A., Annabi, N., & Khademhosseini, A. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.045 · Cited by 3,146
Cell-laden microengineered gelatin methacrylate hydrogels
Nichol, J. W., Koshy, S. T., Bae, H., Hwang, C. M., Yamanlar, S., & Khademhosseini, A. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.03.064 · Cited by 2,377
Determination of free amino groups in proteins by trinitrobenzenesulfonic acid
Habeeb, A. F. S. A. (1966) · Analytical Biochemistry · doi:10.1016/0003-2697(66)90275-2 · Cited by 2,040
Extracellular-matrix tethering regulates stem-cell fate
Trappmann, B., Gautrot, J. E., Connelly, J. T., Strange, D. G. T., Li, Y., Oyen, M. L., Stuart, M. A. C., Boehm, H., Li, B., Viola Vogel, B., et al. (2012) · Nature Materials · doi:10.1038/nmat3339 · Cited by 1,570
Structural and Rheological Properties of Methacrylamide Modified Gelatin Hydrogels
Van Den Bulcke, A. I., Bogdanov, B., De Rooze, N., Schacht, E. H., Cornelissen, M., & Berghmans, H. (2000) · Biomacromolecules · doi:10.1021/bm990017d · Cited by 1,536
Photoinitiated polymerization of PEG-diacrylate with lithium phenyl-2,4,6-trimethylbenzoylphosphinate: polymerization rate and cytocompatibility
Fairbanks, B. D., Schwartz, M. P., Bowman, C. N., & Anseth, K. S. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.08.055 · Cited by 1,206
Statistical Mechanics of Swelling of Network Structures
Flory, P. J. (1950) · The Journal of Chemical Physics · doi:10.1063/1.1747424 · Cited by 1,143
Potential of ceramic materials as permanently implantable skeletal prostheses
Hulbert, S., Young, F. A., Mathews, R. S., Klawitter, J. J., Talbert, C. D., & Stelling, F. H. (1970) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820040309 · Cited by 1,017
Heterogeneous precipitation behavior and stacking-fault-mediated deformation in a CoCrNi-based medium-entropy alloy
Zhao, Y., Yang, T., Tong, Y., Wang, J., Luan, J., Jiao, Z., Chen, D., Yang, Y. G., Hu, A., Liu, C. T., et al. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.07.029 · Cited by 1,002
Carbon-Nanotube-Embedded Hydrogel Sheets for Engineering Cardiac Constructs and Bioactuators
Shin, S. R., Jung, S. M., Zalabany, M., Kim, K., Zorlutuna, P., Kim, S. B., Nikkhah, M., Khabiry, M., Azize, M., Kong, J., et al. (2013) · ACS Nano · doi:10.1021/nn305559j · Cited by 946
Interplay of matrix stiffness and protein tethering in stem cell differentiation
Wen, J. H., Vincent, L. G., Fuhrmann, A., Choi, Y. S., Hribar, K. C., Taylor‐Weiner, H., Chen, S., & Engler, A. J. (2014) · Nature Materials · doi:10.1038/nmat4051 · Cited by 939
Substrate stress relaxation regulates cell spreading
Chaudhuri, O., Gu, L., Darnell, M., Klumpers, D. D., Bencherif, S. A., Weaver, J. C., Huebsch, N., & Mooney, D. J. (2015) · Nature Communications · doi:10.1038/ncomms7365 · Cited by 903
Gelatin-Methacryloyl Hydrogels: Towards Biofabrication-Based Tissue Repair
Klotz, B. J., Gawlitta, D., Rosenberg, A. J. W. P., Malda, J., & Melchels, F. P. W. (2016) · Trends in biotechnology · doi:10.1016/j.tibtech.2016.01.002 · Cited by 880
Functionalization, preparation and use of cell-laden gelatin methacryloyl–based hydrogels as modular tissue culture platforms
Loessner, D., Meinert, C., Kaemmerer, E., Martine, L. C., Yue, K., Levett, P. A., Klein, T. J., Melchels, F. P. W., Khademhosseini, A., & Hutmacher, D. W. (2016) · Nature Protocols · doi:10.1038/nprot.2016.037 · Cited by 868
Carbon-Based Nanomaterials: Multifunctional Materials for Biomedical Engineering
Cha, C., Shin, S. R., Annabi, N., Dokmeci, M. R., & Khademhosseini, A. (2013) · ACS Nano · doi:10.1021/nn401196a · Cited by 833
The effect of matrix stiffness on the differentiation of mesenchymal stem cells in response to TGF-β
Park, J. S., Chu, J. S. F., Tsou, A. D., Diop, R., Tang, Z., Wang, A., & Li, S. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.02.019 · Cited by 737
The principles of directed cell migration
SenGupta, S., Parent, C. A., & Bear, J. E. (2021) · Nature Reviews Molecular Cell Biology · doi:10.1038/s41580-021-00366-6 · Cited by 683
Collective cell durotaxis emerges from long-range intercellular force transmission
Sunyer, R., Conte, V., Escribano, J. M. G., Elósegui-Artola, A., Labernadie, A., Valon, L., Navajas, D., García‐Aznar, J. M., Muñoz, J. J., Roca‐Cusachs, P., et al. (2016) · Science · doi:10.1126/science.aaf7119 · Cited by 632
3D Bioprinting of Low-Concentration Cell-Laden Gelatin Methacrylate (GelMA) Bioinks with a Two-Step Cross-linking Strategy
Yin, J., Yan, M., Wang, Y., Fu, J., & Suo, H. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b16059 · Cited by 602
Reduced Graphene Oxide‐GelMA Hybrid Hydrogels as Scaffolds for Cardiac Tissue Engineering
Shin, S. R., Zihlmann, C., Akbari, M., Assawes, P., Cheung, L., Zhang, K., Manoharan, V., Zhang, Y. S., Yüksekkaya, M. E., Wan, K., et al. (2016) · Small · doi:10.1002/smll.201600178 · Cited by 500
Gelatin methacryloyl and its hydrogels with an exceptional degree of controllability and batch-to-batch consistency
Zhu, M., Wang, Y., Ferracci, G., Zheng, J., Cho, N., & Lee, B. H. (2019) · Scientific Reports · doi:10.1038/s41598-019-42186-x · Cited by 488
ECM and ECM-like materials — Biomaterials for applications in regenerative medicine and cancer therapy
Hinderer, S., Layland, S. L., & Schenke-Layland, K. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2015.11.019 · Cited by 469
Carbon Nanotube Reinforced Hybrid Microgels as Scaffold Materials for Cell Encapsulation
Shin, S. R., Bae, H., Cha, J. M., Mun, J. Y., Chen, Y., Tekin, H., Shin, H., Zarabi, S., Dokmeci, M. R., Tang, X. S., et al. (2011) · ACS Nano · doi:10.1021/nn203711s · Cited by 465
Self-citation
Multifunctional GelMA platforms with nanomaterials for advanced tissue therapeutics
Kurian, A. G., Singh, R. K., Patel, K. D., Lee, J., & Kim, H. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.06.027 · Cited by 462
Gold Nanoparticles Promote Osteogenic Differentiation of Mesenchymal Stem Cells through p38 MAPK Pathway
Yi, C., Liu, D., Fong, C., Zhang, J., & Yang, M. (2010) · ACS Nano · doi:10.1021/nn101373r · Cited by 440
Development of a UV crosslinked biodegradable hydrogel containing adipose derived stem cells to promote vascularization for skin wounds and tissue engineering
Eke, G., Mangır, N., Hasırcı, N., MacNeil, S., & Hasırcı, V. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.03.021 · Cited by 417
Gelatin-Methacryloyl (GelMA) Hydrogels with Defined Degree of Functionalization as a Versatile Toolkit for 3D Cell Culture and Extrusion Bioprinting
Pepelanova, I., Kruppa, K., Scheper, T. H., & Lavrentieva, A. V. (2018) · Bioengineering · doi:10.3390/bioengineering5030055 · Cited by 415
Vat polymerization-based bioprinting—process, materials, applications and regulatory challenges
Ng, W. L., Lee, J. M., Zhou, M., Chen, Y., Lee, A. K.-X., Yeong, W. Y., & Shen, Y. (2019) · Biofabrication · doi:10.1088/1758-5090/ab6034 · Cited by 414
Self-citation
Hydrogel scaffolds for differentiation of adipose-derived stem cells
Huang, Q., Zou, Y., Arno, M. C., Chen, S., Wang, T., Gao, J., Dove, A. P., & Du, J. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00052e · Cited by 402
Self-citation
A biomimetic extracellular matrix for cartilage tissue engineering centered on photocurable gelatin, hyaluronic acid and chondroitin sulfate
Levett, P. A., Melchels, F. P. W., Schrobback, K., Hutmacher, D. W., Malda, J., & Klein, T. J. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.005 · Cited by 379
Aqueous Two‐Phase Emulsion Bioink‐Enabled 3D Bioprinting of Porous Hydrogels
Ying, G., Jiang, N., Maharjan, S., Yin, Y., Chai, R., Cao, X., Yang, J., Miri, A. K., Hassan, S., & Zhang, Y. S. (2018) · Advanced Materials · doi:10.1002/adma.201805460 · Cited by 378
Gelatin Methacrylate (GelMA)-Based Hydrogels for Cell Transplantation: an Effective Strategy for Tissue Engineering
Xiao, S., Zhao, T., Wang, J., Wang, C., Du, J., Ying, L., Lin, J., Zhang, C., Hu, W., Wang, L., et al. (2019) · Stem Cell Reviews and Reports · doi:10.1007/s12015-019-09893-4 · Cited by 372
Improved properties of bone and cartilage tissue from 3D inkjet-bioprinted human mesenchymal stem cells by simultaneous deposition and photocrosslinking in PEG-GelMA
Gao, G., Schilling, A. F., Hubbell, K., Yonezawa, T., Truong, D. D., Hong, Y., Dai, G., & Cui, X. (2015) · Biotechnology Letters · doi:10.1007/s10529-015-1921-2 · Cited by 344
The bio in the ink: cartilage regeneration with bioprintable hydrogels and articular cartilage-derived progenitor cells
Levato, R., Webb, W. R., Otto, I. A., Mensinga, A., Zhang, Y., van Rijen, M. H. P., van Weeren, P. R., Khan, I. M., & Malda, J. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.08.005 · Cited by 339
Nanoparticles and innate immunity: new perspectives on host defence
Boraschi, D., Italiani, P., Palomba, R., Decuzzi, P., Duschl, A., Fadeel, B., & Moghimi, S. M. (2017) · Seminars in Immunology · doi:10.1016/j.smim.2017.08.013 · Cited by 338
Synthesis and characterization of photocrosslinkable gelatin and silk fibroin interpenetrating polymer network hydrogels
Xiao, W., He, J., Nichol, J. W., Wang, L., Hutson, C. B., Wang, B., Du, Y., Fan, H., & Khademhosseini, A. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.01.016 · Cited by 315
Self-citation
The rheology of direct and suspended extrusion bioprinting
Cooke, M. E., & Rosenzweig, D. H. (2021) · APL Bioengineering · doi:10.1063/5.0031475 · Cited by 311
miR‐23a‐3p‐abundant small extracellular vesicles released from Gelma/nanoclay hydrogel for cartilage regeneration
Hu, H., Dong, L., Bu, Z., Shen, Y., Luo, J., Zhang, H., Zhao, S., Lv, F., & Liu, Z. (2020) · Journal of Extracellular Vesicles · doi:10.1080/20013078.2020.1778883 · Cited by 310
In vitro and in vivo analysis of visible light crosslinkable gelatin methacryloyl (GelMA) hydrogels
Noshadi, I., Hong, S., Sullivan, K. E., Sani, E. S., Lara, R. P., Tamayol, A., Shin, S. R., Gao, A. E., Stoppel, W. L., Black, L. D., et al. (2017) · Biomaterials Science · doi:10.1039/c7bm00110j · Cited by 309
Directing Induced Pluripotent Stem Cell Derived Neural Stem Cell Fate with a Three-Dimensional Biomimetic Hydrogel for Spinal Cord Injury Repair
Fan, L., Liu, C., Chen, X., Zou, Y., Zhou, Z., Lin, C., Tan, G., Zhou, L., Ning, C., & Wang, Q. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b05293 · Cited by 276
A 3D-printed PRP-GelMA hydrogel promotes osteochondral regeneration through M2 macrophage polarization in a rabbit model
Jiang, G., Li, S., Yu, K., He, B., Hong, J., Xu, T., Meng, J., Ye, C., Chen, Y., Shi, Z., et al. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.04.010 · Cited by 263
Self-citation
Synthesis and Characterization of Types A and B Gelatin Methacryloyl for Bioink Applications
Lee, B., Lum, N., Seow, L., Lim, P., & Tan, L. P. (2016) · Materials · doi:10.3390/ma9100797 · Cited by 255
Extrusion bioprinting of soft materials: An emerging technique for biological model fabrication
Jiang, T., Munguia-López, J. G., Flores-Torres, S., Kort-Mascort, J., & Kinsella, J. M. (2019) · Applied Physics Reviews · doi:10.1063/1.5059393 · Cited by 251
3D printing of complex GelMA-based scaffolds with nanoclay
Gao, Q., Niu, X., Shao, L., Zhou, L., Lin, Z., Sun, A., Fu, J., Chen, Z., Hu, J. P., Liu, Y., et al. (2019) · Biofabrication · doi:10.1088/1758-5090/ab0cf6 · Cited by 250
Self-citation
Photopolymerization of cell-laden gelatin methacryloyl hydrogels using a dental curing light for regenerative dentistry
Monteiro, N., Thrivikraman, G., Athirasala, A., Tahayeri, A., França, C. M., Ferracane, J. L., & Bertassoni, L. E. (2017) · Dental Materials · doi:10.1016/j.dental.2017.11.020 · Cited by 228
Measuring dynamic cell–material interactions and remodeling during 3D human mesenchymal stem cell migration in hydrogels
Schultz, K. M., Kyburz, K. A., & Anseth, K. S. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1511304112 · Cited by 216
Tailoring the mechanical properties of gelatin methacryloyl hydrogels through manipulation of the photocrosslinking conditions
O’Connell, C. D., Zhang, B., Onofrillo, C., Duchi, S., Blanchard, R., Quigley, A. F., Bourke, J., Gambhir, S., Kapsa, R. M. I., Bella, C. D., et al. (2018) · Soft Matter · doi:10.1039/c7sm02187a · Cited by 200
Effects of Irgacure 2959 and lithium phenyl-2,4,6-trimethylbenzoylphosphinate on cell viability, physical properties, and microstructure in 3D bioprinting of vascular-like constructs
Xu, H., Casillas, J., Krishnamoorthy, S., & Xu, C. (2020) · Biomedical Materials · doi:10.1088/1748-605x/ab954e · Cited by 199
Directly coaxial 3D bioprinting of large-scale vascularized tissue constructs
Shao, L., Gao, Q., Xie, C., Fu, J., Xiang, M., & He, Y. (2020) · Biofabrication · doi:10.1088/1758-5090/ab7e76 · Cited by 195
Self-citation
DLP printing photocurable chitosan to build bio-constructs for tissue engineering
Shen, Y., Tang, H., Huang, X., Hang, R., Zhang, X., Wang, Y., & Yao, X. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.115970 · Cited by 194
Vessel‐on‐a‐chip with Hydrogel‐based Microfluidics
Nie, J., Gao, Q., Wang, Y., Zeng, J., Zhao, H., Sun, Y., Shen, J., Ramezani, H., Fu, Z., Liu, Z., et al. (2018) · Small · doi:10.1002/smll.201802368 · Cited by 188
Self-citation
Hybrid hydrogel-aligned carbon nanotube scaffolds to enhance cardiac differentiation of embryoid bodies
Ahadian, S., Yamada, S., Ramón‐Azcón, J., Estili, M., Liang, X., Nakajima, K., Shiku, H., Khademhosseini, A., & Matsue, T. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.11.047 · Cited by 180
Click‐Crosslinked Injectable Gelatin Hydrogels
Koshy, S. T., Desai, R. M., Joly, P., Li, J., Bagrodia, R. K., Lewin, S. A., Joshi, N. S., & Mooney, D. J. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500757 · Cited by 173
Efficient and controllable synthesis of highly substituted gelatin methacrylamide for mechanically stiff hydrogels
Lee, B. H., Shirahama, H., Cho, N., & Tan, L. P. (2015) · RSC Advances · doi:10.1039/c5ra22028a · Cited by 170
Decoupling the effects of stiffness and fiber density on cellular behaviors via an interpenetrating network of gelatin-methacrylate and collagen
Berger, A. J., Linsmeier, K. M., Kreeger, P. K., & Masters, K. S. B. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.06.039 · Cited by 169
Deep learning for fabrication and maturation of 3D bioprinted tissues and organs
Ng, W. L., Chan, A., Ong, Y.-S., & Chua, C. K. (2020) · Virtual and Physical Prototyping · doi:10.1080/17452759.2020.1771741 · Cited by 168
Rheological Properties of Coordinated Physical Gelation and Chemical Crosslinking in Gelatin Methacryloyl (GelMA) Hydrogels
Young, A. T., White, O. C., & Daniele, M. A.-A. (2020) · Macromolecular Bioscience · doi:10.1002/mabi.202000183 · Cited by 161
Controlling Droplet Impact Velocity and Droplet Volume: Key Factors to Achieving High Cell Viability in Sub-Nanoliter Droplet-based Bioprinting
Ng, W. L., Huang, X., Shkolnikov, V., Goh, G. L., Suntornnond, R., & Yeong, W. Y. (2021) · International Journal of Bioprinting · doi:10.18063/ijb.v8i1.424 · Cited by 160
Vascularized Bone-Mimetic Hydrogel Constructs by 3D Bioprinting to Promote Osteogenesis and Angiogenesis
Anada, T., Pan, C., Stahl, A. M., Mori, S., Fukuda, J., Suzuki, O., & Yang, Y. (2019) · International Journal of Molecular Sciences · doi:10.3390/ijms20051096 · Cited by 155
Nanoparticle-Based Hybrid Scaffolds for Deciphering the Role of Multimodal Cues in Cardiac Tissue Engineering
Lee, J., Manoharan, V., Cheung, L., Lee, S., Cha, B.-H., Newman, P. L. H., Farzad, R., Mehrotra, S., Zhang, K., Khan, F., et al. (2019) · ACS Nano · doi:10.1021/acsnano.9b03050 · Cited by 150
Monitoring Anomalies in 3D Bioprinting with Deep Neural Networks
Jin, Z., Zhang, Z., Shao, X., & Gu, G. X. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c01761 · Cited by 147
Stereolithography 3D Bioprinting Method for Fabrication of Human Corneal Stroma Equivalent
Mahdavi, S. S., Abdekhodaie, M. J., Kumar, H., Mashayekhan, S., Baradaran‐Rafii, A., & Kim, K. (2020) · Annals of Biomedical Engineering · doi:10.1007/s10439-020-02537-6 · Cited by 146
A skeleton muscle model using GelMA-based cell-aligned bioink processed with an electric-field assisted 3D/4D bioprinting
Yang, G. H., Kim, W.-J., Kim, J., & Kim, G. (2020) · Theranostics · doi:10.7150/thno.50794 · Cited by 146
Trends in predictive biodegradation for sustainable mitigation of environmental pollutants: Recent progress and future outlook
Singh, A. K., Bilal, M., Iqbal, H. M. N., & Raj, A. (2021) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2020.144561 · Cited by 146
Cross-Linkable Gelatins with Superior Mechanical Properties Through Carboxylic Acid Modification: Increasing the Two-Photon Polymerization Potential
Hoorick, J. V., Gruber, P., Marković, M., Tromayer, M., Erps, J. V., Hugo Thienpont, A., Liska, R., Ovsianikov, A., Dubruel, P., & Vlierberghe, S. V. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00905 · Cited by 142
Permeability mapping of gelatin methacryloyl hydrogels
Miri, A. K., Hosseinabadi, H. G., Çeçen, B., Hassan, S., & Zhang, Y. S. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.07.006 · Cited by 135
Interpenetrating network gelatin methacryloyl (GelMA) and pectin-g-PCL hydrogels with tunable properties for tissue engineering
Fares, M. M., Sani, E. S., Lara, R. P., Oliveira, R. B., Khademhosseini, A., & Annabi, N. (2018) · Biomaterials Science · doi:10.1039/c8bm00474a · Cited by 127
3D culture of HepaRG cells in GelMa and its application to bioprinting of a multicellular hepatic model
Cuvellier, M., Ezan, F., Oliveira, H., Rose, S., Fricain, J.-C., Langouët, S., Legagneux, V., & Baffet, G. (2021) · Biomaterials · doi:10.1016/j.biomaterials.2020.120611 · Cited by 126
Late-Onset Inflammatory Adverse Reactions Related to Soft Tissue Filler Injections
Alijotas‐Reig, J., Fernández‐Figueras, M. T., & Puig, L. (2013) · Clinical Reviews in Allergy & Immunology · doi:10.1007/s12016-012-8348-5 · Cited by 125
A guideline for 3D printing terminology in biomedical research utilizing ISO/ASTM standards
Alexander, A. E., Wake, N., Chepelev, L. L., Brantner, P., Ryan, J. R., & Wang, K. C. (2021) · 3D Printing in Medicine · doi:10.1186/s41205-021-00098-5 · Cited by 124
Fabrication of Gelatin Methacrylate (GelMA) Scaffolds with Nano- and Micro-Topographical and Morphological Features
Aldana, A. A., Malatto, L., Rehman, M. A. U., Boccaccini, A. R., & Abraham, G. A. (2019) · Nanomaterials · doi:10.3390/nano9010120 · Cited by 123
Hydrogel composite scaffolds achieve recruitment and chondrogenesis in cartilage tissue engineering applications
Huang, B., Li, P., Chen, M., Peng, L., Luo, X., Tian, G., Wang, H., Wu, L., Tian, Q., Li, H., et al. (2022) · Journal of Nanobiotechnology · doi:10.1186/s12951-021-01230-7 · Cited by 119
Combinations of photoinitiator and UV absorber for cell-based digital light processing (DLP) bioprinting
Huh, J., Moon, Y.-W., Park, J., Atala, A., Yoo, J. J., & Lee, S. J. (2021) · Biofabrication · doi:10.1088/1758-5090/abfd7a · Cited by 117
The influence of the stiffness of GelMA substrate on the outgrowth of PC12 cells
Wu, Y., Xiang, Y., Fang, J., Li, X., Lin, Z., Dai, G., Yin, J., Wei, P., & Zhang, D. (2019) · Bioscience Reports · doi:10.1042/bsr20181748 · Cited by 112
Gelatin- and starch-based hydrogels. Part A: Hydrogel development, characterization and coating
Nieuwenhove, I. V., Salamon, A., Peters, K., Graulus, G., Martins, J. C., Frankel, D. J., Kersemans, K., Vos, F. D., Vlierberghe, S. V., & Dubruel, P. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.06.098 · Cited by 111
Hybrid Printing Using Cellulose Nanocrystals Reinforced GelMA/HAMA Hydrogels for Improved Structural Integration
Fan, Y., Yue, Z., Lucarelli, E., & Wallace, G. G. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.202001410 · Cited by 108
Bio-printing of aligned GelMa-based cell-laden structure for muscle tissue regeneration
Hwangbo, H., Lee, H., Jin, E., Lee, J., Jo, Y., Ryu, D., & Kim, G. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.06.031 · Cited by 108
Sequentially-crosslinked biomimetic bioactive glass/gelatin methacryloyl composites hydrogels for bone regeneration
Zheng, J., Zhao, F., Zhang, W., Mo, Y., Zeng, L., Li, X., & Chen, X. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.03.029 · Cited by 102
Modeling the printability of photocuring and strength adjustable hydrogel bioink during projection-based 3D bioprinting
Sun, Y., Yu, K., Nie, J., Sun, M., Fu, J., Wang, H., & He, Y. (2020) · Biofabrication · doi:10.1088/1758-5090/aba413 · Cited by 101
Self-citation
Process-induced cell damage: pneumatic versus screw-driven bioprinting
Ning, L., Yang, B., Mohabatpour, F., Betancourt, N., Sarker, M. D., Papagerakis, P., & Chen, D. (2019) · Biofabrication · doi:10.1088/1758-5090/ab5f53 · Cited by 98
Direct-write 3D printing and characterization of a GelMA-based biomaterial for intracorporeal tissue engineering
Adib, A. A., Sheikhi, A., Shahhosseini, M., Simeunović, A., Wu, S., Castro, C. E., Zhao, R. R., Khademhosseini, A., & Hoelzle, D. J. (2020) · Biofabrication · doi:10.1088/1758-5090/ab97a1 · Cited by 98
Photocrosslinkable and elastomeric hydrogels for bone regeneration
Thakur, T., Xavier, J. R., Cross, L., Jaiswal, M. K., Mondragón, E., Kaunas, R. R., & Gaharwar, A. K. (2015) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35621 · Cited by 97
Printability during projection-based 3D bioprinting
Yu, K., Zhang, X., Sun, Y., Gao, Q., Fu, J., Cai, X., & He, Y. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.09.021 · Cited by 94
Self-citation
Shear Thinning of Noncolloidal Suspensions
Vázquez-Quesada, A., Tanner, R. I., & Ellero, M. (2016) · Physical Review Letters · doi:10.1103/physrevlett.117.108001 · Cited by 93
Improving piezoelectric cell printing accuracy and reliability through neutral buoyancy of suspensions
Chahal, D., Ahmadi, A., & Cheung, K. C. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24562 · Cited by 90
Bone Mesenchymal Stem Cell-Derived Exosome-Loaded Injectable Hydrogel for Minimally Invasive Treatment of Spinal Cord Injury
Cheng, J., Chen, Z., Liu, C., Zhong, M., Wang, S., Sun, Y., Wen, H., & Shu, T. (2021) · Nanomedicine · doi:10.2217/nnm-2021-0025 · Cited by 88
Self-citation
Gelatin nanofibers: Analysis of triple helix dissociation temperature and cold-water-solubility
Steyaert, I., Rahier, H., Vlierberghe, S. V., Olijve, J., & Clerck, K. D. (2016) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2016.01.016 · Cited by 80
Micropore‐Forming Gelatin Methacryloyl (GelMA) Bioink Toolbox 2.0: Designable Tunability and Adaptability for 3D Bioprinting Applications
Yi, S., Liu, Q., Luo, Z., He, J. J., Ma, H., Li, W., Wang, D., Zhou, C., Garciamendez‐Mijares, C. E., Hou, L., et al. (2022) · Small · doi:10.1002/smll.202106357 · Cited by 79
Self-citation
Hydroxyapatite‐Incorporated Composite Gels Improve Mechanical Properties and Bioactivity of Bone Scaffolds
Suvarnapathaki, S., Wu, X., Lantigua, D., Nguyen, M. A., & Camci‐Unal, G. (2020) · Macromolecular Bioscience · doi:10.1002/mabi.202000176 · Cited by 77
Biocompatibility evaluation of a 3D-bioprinted alginate-GelMA-bacteria nanocellulose (BNC) scaffold laden with oriented-growth RSC96 cells
Wu, Z., Xie, S., Kang, Y., Shan, X., Li, Q., & Cai, Z. (2021) · Materials Science and Engineering C · doi:10.1016/j.msec.2021.112393 · Cited by 76
Bioprinting of Cell‐Laden Microfiber: Can It Become a Standard Product?
Shao, L., Gao, Q., Xie, C., Fu, J., Xiang, M., & He, Y. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201900014 · Cited by 74
Self-citation
Why choose 3D bioprinting? Part II: methods and bioprinters
He, Y., Gu, Z., Xie, M., Fu, J., & Lin, H. M. (2020) · Bio-Design and Manufacturing · doi:10.1007/s42242-020-00064-w · Cited by 71
Self-citation
Modular Cross-Linking of Gelatin-Based Thiol–Norbornene Hydrogels for in Vitro 3D Culture of Hepatocellular Carcinoma Cells
Greene, T., & Lin, C. (2015) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5b00436 · Cited by 70
Stiffness of photocrosslinkable gelatin hydrogel influences nucleus pulposus cell properties in vitro
Xu, P., Guan, J., Chen, Y., Xiao, H., Yang, T., Sun, H., Wu, N., Zhang, C., & Mao, Y. (2020) · Journal of Cellular and Molecular Medicine · doi:10.1111/jcmm.16141 · Cited by 69
Self-citation
RGD-Modified Alginate–GelMA Hydrogel Sheet Containing Gingival Mesenchymal Stem Cells: A Unique Platform for Wound Healing and Soft Tissue Regeneration
Ansari, S., Pouraghaei, S., Chen, C., Sarrión, P., & Moshaverinia, A. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c01571 · Cited by 68
FLASH: Fluorescently LAbelled Sensitive Hydrogel to monitor bioscaffolds degradation during neocartilage generation
Onofrillo, C., Duchi, S., Francis, S. L., O’Connell, C. D., Aguilar, L. M. C., Doyle, S. E., Yue, Z., Wallace, G. G., Choong, P., & Bella, C. D. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2020.120383 · Cited by 66
Compensating the cell-induced light scattering effect in light-based bioprinting using deep learning
Guan, J., You, S., Xiang, Y., Schimelman, J. B., Alido, J., Ma, X., Tang, M., & Chen, S. (2021) · Biofabrication · doi:10.1088/1758-5090/ac3b92 · Cited by 65
Biocompatibility in Regenerative Nanomedicine
Zor, F., Selek, F. N., Orlando, G., & Williams, D. F. (2019) · Nanomedicine · doi:10.2217/nnm-2019-0140 · Cited by 57
Submerged and non-submerged 3D bioprinting approaches for the fabrication of complex structures with the hydrogel pair GelMA and alginate/methylcellulose
Li, H., Tan, Y. J., Kiran, R., Tor, S. B., & Zhou, K. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101640 · Cited by 54
3D “honeycomb” cell/carbon nanofiber/gelatin methacryloyl (GelMA) modified screen-printed electrode for electrochemical assessment of the combined toxicity of deoxynivalenol family mycotoxins
Wei, K., Sun, J., Gao, Q., Yang, X., Ye, Y., Ji, J., & Sun, X. (2021) · Bioelectrochemistry · doi:10.1016/j.bioelechem.2021.107743 · Cited by 52
Self-citation
Indirect additive manufacturing as an elegant tool for the production of self-supporting low density gelatin scaffolds
Hoorick, J. V., Declercq, H., Muynck, A. D., Houben, A., Hoorebeke, L. V., Cornelissen, R., Erps, J. V., Hugo Thienpont, A., Dubruel, P., & Vlierberghe, S. V. (2015) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-015-5566-4 · Cited by 51
Biomimetic Methacrylated Gelatin Hydrogel Loaded With Bone Marrow Mesenchymal Stem Cells for Bone Tissue Regeneration
Li, J., Wang, W., Li, M., Song, P., Lei, H., Gui, X., Zhou, C., & Liu, L. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.770049 · Cited by 50
Encapsulation of Human Natural and Induced Regulatory T‐Cells in IL‐2 and CCL1 Supplemented Alginate‐GelMA Hydrogel for 3D Bioprinting
Kim, J., Hope, C. M., Gantumur, N., Perkins, G. B., Stead, S. O., Yue, Z., Liu, X., Urigoitia-Asua, A., Kette, F. D., Penko, D., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000544 · Cited by 48
3D Bioprinted GelMA‐Nanoclay Hydrogels Induce Colorectal Cancer Stem Cells Through Activating Wnt/β‐Catenin Signaling
Zhang, Y., Wang, Z., Hu, Q., Luo, H., Lu, B., Gao, Y., Qiao, Z., Zhou, Y., Fang, Y., Gu, J., et al. (2022) · Small · doi:10.1002/smll.202200364 · Cited by 46
Bioinspired Hydrogel Anchoring 3DP GelMA/HAp Scaffolds Accelerates Bone Reconstruction
Pu, X., Tong, L., Wang, X., Liu, Q., Chen, M., Li, X., Lu, G., Lan, W., Li, Q., Liang, J., et al. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c25015 · Cited by 44
Self-citation
Effect of Freezing Process on the Microstructure of Gelatin Methacryloyl Hydrogels
Liu, T., Zhang, Y., Sun, M., Jin, M., Xia, W., Yang, H., & Wang, T. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.810155 · Cited by 43
Self-citation
Immunocompatibility evaluation of hydrogel‐coated polyimide implants for applications in regenerative medicine
Šírová, M., Vlierberghe, S. V., Matyášová, V., Rossmann, P., Schacht, E. H., Dubruel, P., & Řı́hová, B. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34873 · Cited by 42
Hydrogel films and coatings by swelling-induced gelation
Moreau, D., Chauvet, C., Étienne, F., Rannou, F., & Corté, L. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1609603113 · Cited by 42
3D Stem Cell Culture
Ylöstalo, J. (2020) · Cells · doi:10.3390/cells9102178 · Cited by 41
Effects of mechanical properties of gelatin methacryloyl hydrogels on encapsulated stem cell spheroids for 3D tissue engineering
Kim, E. M., Lee, G. M., Lee, S., Kim, S., Lee, D., Yoon, D. S., Joo, J., Kong, H., Park, H. H., & Shin, H. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.11.145 · Cited by 40
Engineering pericyte-supported microvascular capillaries in cell-laden hydrogels using stem cells from the bone marrow, dental pulp and dental apical papilla
Parthiban, S. P., He, W., Monteiro, N., Athirasala, A., França, C. M., & Bertassoni, L. E. (2020) · Scientific Reports · doi:10.1038/s41598-020-78176-7 · Cited by 38
Integrated design and fabrication strategies for biomechanically and biologically functional PLA/β-TCP nanofiber reinforced GelMA scaffold for tissue engineering applications
Joshi, M. K., Lee, S., Tiwari, A. P., Maharjan, B., Poudel, S. B., Park, C. H., & Kim, C. S. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.07.179 · Cited by 34
Porous scaffolds with the structure of an interpenetrating polymer network made by gelatin methacrylated nanoparticle-stabilized high internal phase emulsion polymerization targeted for tissue engineering
Safaei-Yaraziz, A., Akbari‐Birgani, S., & Nikfarjam, N. (2021) · RSC Advances · doi:10.1039/d1ra03333f · Cited by 33
Biofabrication of a shape-stable auricular structure for the reconstruction of ear deformities
Otto, I. A., Capendale, P. E., Garcia, J. P., de Ruijter, M., van Doremalen, R. F. M., Castilho, M. D., Lawson, T. B., Grinstaff, M. W., Breugem, C. C., Kon, M., et al. (2021) · Materials Today Bio · doi:10.1016/j.mtbio.2021.100094 · Cited by 32
Investigating Glioblastoma Angiogenesis Using A 3D in Vitro GelMA Microwell Platform
Nguyen, D. T., Fan, Y., Akay, Y. M., & Akay, M. (2016) · IEEE Transactions on NanoBioscience · doi:10.1109/tnb.2016.2528170 · Cited by 30
Facile 3D cell culture protocol based on photocurable hydrogels
Xie, M., Zheng, Y., Gao, Q., & He, Y. (2020) · Bio-Design and Manufacturing · doi:10.1007/s42242-020-00096-2 · Cited by 27
Self-citation
Nanoceria-GO-intercalated multicellular spheroids revascularize and salvage critical ischemic limbs through anti-apoptotic and pro-angiogenic functions
Bayaraa, O., Dashnyam, K., Singh, R. K., Mandakhbayar, N., Lee, J. H., Park, J., Lee, J., & Kim, H. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2022.121914 · Cited by 27
Coaxial Hydro-Nanofibrils for Self-Assembly of Cell Sheets Producing Skin Bilayers
Mao, W., Kang, M. K., Shin, J. U., Son, Y. J., Kim, H. S., & Yoo, H. S. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b17740 · Cited by 26
Cell-modified bioprinted microspheres for vascular regeneration
Shen, J., Ji, Y., Xie, M., Zhao, H., Xuan, W., Li, Y., Yu, X., Xu, F., Su, S., Nie, J., et al. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.110896 · Cited by 26
Self-citation
Effect of Curdlan on the Rheological Properties of Hydroxypropyl Methylcellulose
Zhang, L., Yue, L.-N., Qian, J.-Y., & Ding, X. (2020) · Foods · doi:10.3390/foods10010034 · Cited by 26
Photobiomodulation combined with adipose-derived stem cells encapsulated in methacrylated gelatin hydrogels enhances in vivo bone regeneration
Çalış, M., Irmak, G., Demirtaş, T. T., Kara, M., Üstün, G. G., Gümüşderelı́oğlu, M., Türkkanı, A., Çakar, A. N., & Özgür, F. (2021) · Lasers in Medical Science · doi:10.1007/s10103-021-03308-y · Cited by 24
Photo-curable carboxymethylcellulose composite hydrogel as a promising biomaterial for biomedical applications
Barakat, A., Kamoun, E. A., EL-Moslamy, S. H., Ghazy, M. B., & Fahmy, A. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.03.201 · Cited by 24
Efficacy of Large Groove Texture on Rat Sciatic Nerve Regeneration In Vivo Using Polyacrylonitrile Nerve Conduits
Wang, Z., Wu, Y., Xiang, Y., Kruth, M. B., Wei, P., Dai, G., Xu, K., Yin, J., & Huang, Y. H. (2020) · Annals of Biomedical Engineering · doi:10.1007/s10439-020-02560-7 · Cited by 23
3D Bioprinting of Reinforced Vessels by Dual-Cross-linked Biocompatible Hydrogels
Peng, K., Liu, X., Zhao, H., Lü, H., Lv, F., Liu, L., Huang, Y., Wang, S., & Gu, Q. (2021) · ACS Applied Bio Materials · doi:10.1021/acsabm.1c00283 · Cited by 23
Design, synthesis, and characterization of a novel dual cross-linked gelatin-based bioadhesive for hard and soft tissues adhesion capability
Pirmoradian, M., Hooshmand, T., Najafi, F., Nazarpak, M. H., & Davaie, S. (2022) · Biomedical Materials · doi:10.1088/1748-605x/ac9268 · Cited by 14
Surface Creasing-Induced Micropatterned GelMA Using Heating-Hydration Fabrication for Effective Vascularization
Kasetsiriku, S., Ketpun, D., Chuah, Y. J., Sriphutkiat, Y., Wang, D., & Zhou, Y. (2021) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-021-00345-0 · Cited by 6

Flagged first, then by citations

6 of the 137 references couldn’t be matched to a known paper.

Research works printed but not linked: 7

10.1016/j.addr.2015.11.019 · DOI · Paper page
10.1016/j.biomaterials.2015.08.045 · DOI · Paper page
10.3390/nano9010120 · DOI
10.1007/s42242-020-00096-2 · DOI
10.1002/mabi.202000183 · DOI
10.1016/j.carbpol.2016.06.098 · DOI
10.1021/acsami.7b16059 · DOI

Sorted by citations

Dandelion-derived vesicles-laden hydrogel dressings capable of neutralizing Staphylococcus aureus exotoxins for the care of invasive wounds
Tan, S., Liu, Z., Cong, M., Zhong, X., Mao, Y., Fan, M., Jiao, F., & Qiao, H. (2024) · Journal of Controlled Release · doi:10.1016/j.jconrel.2024.02.045 · Cited by 122
4D bioprinting of programmed dynamic tissues
Lai, J., Liu, Y., Lü, G., Yung, P. S., Wang, X., Tuan, R. S., & Li, Z. A. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2024.03.033 · Cited by 118
Gelatin-Based Metamaterial Hydrogel Films with High Conformality for Ultra-Soft Tissue Monitoring
Chen, Y., Zhou, Y., Hu, Z., Lu, W., Li, Z., Gao, N., Liu, N., Li, Y., He, J., Gao, Q., et al. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01225-z · Cited by 81
Self-citation
Incorporating copper-based nanosheets into an injectable self-healing hydrogel enables superb repair of infected diabetic wound
Xie, D., Hu, C., Jiang, C., Xia, J., Ye, L., Jin, Y., Jiang, S., Ji, Y., Zhang, Z., Song, H., et al. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.146788 · Cited by 73
Enhancing bone regeneration and immunomodulation via gelatin methacryloyl hydrogel-encapsulated exosomes from osteogenic pre-differentiated mesenchymal stem cells.
Li, X., Si, Y., Liang, J., Li, M., Wang, Z., Qin, Y., & Sun, L. (2024) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2024.05.209 · Cited by 72

See all 282

Authors: He, J., Sun, Y., Gao, Q., He, C., Yao, K., Wang, T., Xie, M., Yu, K., Nie, J., Chen, Y., & He, Y.
Affiliations: State Key Laboratory Fluid Power and Mechatronic Systems (CN)
Dalian Institute of Chemical Physics (CN)
Zhejiang Provincial People's Hospital (CN)
State Key Laboratory of Fluid Power and Mechatronic Systems School of Mechanical Engineering Zhejiang University Hangzhou 310027 China
Corresponding author: He, Yong
ORCID: He, Jing
Gao, Qing
Yao, Ke
Wang, Tongyao
Xie, Mingjun
Chen, Yuewei
He, Yong
Venue: Advanced Healthcare Materials
Publisher: Wiley
Published: 2023-05-15
Volume: 12
Issue: 23
Pages: e2300395-e2300395
ISSN: 2192-2640 (ISSN-L)
2192-2659
DOI: 10.1002/adhm.202300395
OpenAlex: W4367310714
Cited by: 275
References: 137
Citations by year: 2026: 90 · 2025: 95 · 2024: 74 · 2023: 16
FWCI: 23.83
Type: journal article
Language: en
Open access: closed
Licence: onlinelibrary.wiley.com/termsAndConditions#vor (vor)
Locations: Advanced Healthcare Materials (publishedVersion)
PubMed (publishedVersion)
Funders: National Key Research and Development Program of China (2018YFA0703000)
National Natural Science Foundation of China (52235007, U1909218)
Topics: Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
Physical Sciences › Materials Science › Biomaterials › Collagen: Extraction and Characterization
Keywords: gelatin methacryloyl, photocurable hydrogel, degree of substitution, porosity, viscosity, formability, mechanical strength, swelling, biodegradation, cytocompatibility, 3D bioprinting, 3D cell culture
MeSH terms: Gelatin, Methacrylates, Reference Standards, Hydrogels, Tissue Engineering

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Gelatin Methacryloyl Hydrogel, from Standardization, Performance, to Biomedical Application

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks