The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
On the Fracture Toughness of Advanced Materials
Abstract
Few engineering materials are limited by their strength; rather they are limited by their resistance to fracture or fracture toughness. It is not by accident that most critical structures, such as bridges, ships, nuclear pressure vessels and so forth, are manufactured from materials that are comparatively low in strength but high in toughness. Indeed, in many classes of materials, strength and toughness are almost mutually exclusive. From a fracture‐mechanics perspective, the ability of a microstructure to develop toughening mechanisms acting either ahead or behind the crack tip can result in resistance‐curve (R‐curve) behavior where the fracture resistance actually increases with crack extension; the implication here is that toughness is often developed primarily during crack growth and not for crack initiation. Biological materials are perfect examples of this; moreover, they offer microstructural design strategies for the development of new materials for structural applications demanding combinations of both strength and toughness.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Liu, J., Rinzler, A. G., Dai, H., Hafner, J. H., Bradley, R. K., Boul, P. J., Lu, A., Iverson, T., Shelimov, K., Huffman, C. B., et al. (1998) · Science · doi:10.1126/science.280.5367.1253 · Cited by 2,903
Nature’s hierarchical materials
Fratzl, P., & Weinkamer, R. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2007.06.001 · Cited by 2,800
Biological materials: Structure and mechanical properties
Meyers, M. A., Chen, P.-Y., Lin, A. Y.-M., & Seki, Y. (2008) · Progress in Materials Science · doi:10.1016/j.pmatsci.2007.05.002 · Cited by 2,573
Freezing as a Path to Build Complex Composites
Deville, S., Saiz, E., Nalla, R. K., & Tomsia, A. P. (2006) · Science · doi:10.1126/science.1120937 · Cited by 1,900
Tough, Bio-Inspired Hybrid Materials
Munch, E., Launey, M. E., Alsem, D. H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2008) · Science · doi:10.1126/science.1164865 · Cited by 1,822
Self-citationFundamentals of Fracture Mechanics
(2002) · Mechanical Properties of Engineered Materials · doi:10.1201/9780203910399.ch11 · Cited by 1,735
Ultrastrong and Stiff Layered Polymer Nanocomposites
Podsiadlo, P., Kaushik, A. K., Arruda, E. M., Waas, A. M., Shim, B. S., Xu, J., Nandivada, H., Pumplin, B. G., Lahann, J., Ramamoorthy, A., et al. (2007) · Science · doi:10.1126/science.1143176 · Cited by 1,630
Perspective on the Development of High‐Toughness Ceramics
Evans, A. G. (1990) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1990.tb06493.x · Cited by 1,625
Nanostructured artificial nacre
Tang, Z., Kotov, N. A., Magonov, S., & Ozturk, B. (2003) · Nature Materials · doi:10.1038/nmat906 · Cited by 1,454
The mechanical design of nacre
Jackson, A. P., Vincent, J. F. V., & Turner, R. M. (1988) · Proceedings of the Royal Society of London. Series B. Biological Sciences · doi:10.1098/rspb.1988.0056 · Cited by 1,269
Cited by
The conflicts between strength and toughness
Ritchie, R. O. (2011) · Nature Materials · doi:10.1038/nmat3115 · Cited by 3,989
Self-citationMechanically-Induced Chemical Changes in Polymeric Materials
Caruso, M. M., Davis, D. A., Shen, Q., Odom, S. A., Sottos, N. R., White, S. R., & Moore, J. S. (2009) · Chemical Reviews · doi:10.1021/cr9001353 · Cited by 1,372
Liu, Z., Meyers, M. A., Zhang, Z., & Ritchie, R. O. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.04.013 · Cited by 895
Self-citationNanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi
Zhang, Z., Mao, M. M., Wang, J., Gludovatz, B., Zhang, Z., Mao, S. X., George, E. P., Yu, Q., & Ritchie, R. O. (2015) · Nature Communications · doi:10.1038/ncomms10143 · Cited by 845
Self-citationZhao, Q., Sun, Q., Xin, S., Chen, Y., Wu, C., Wang, H., Xu, J., Wan, M., Zeng, W., & Zhao, Y. (2022) · Materials Science and Engineering: A · doi:10.1016/j.msea.2022.143260 · Cited by 785
Tan, J. C., & Cheetham, A. K. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00163e · Cited by 762
On the Mechanistic Origins of Toughness in Bone
Launey, M. E., Buehler, M. J., & Ritchie, R. O. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104427 · Cited by 741
Self-citationTitanium metal matrix composites: An overview
Hayat, M. D., Singh, H., He, Z., & Cao, P. (2019) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.04.005 · Cited by 711
Demetriou, M. D., Launey, M. E., Garrett, G., Schramm, J. P., Hofmann, D. C., Johnson, W. L., & Ritchie, R. O. (2011) · Nature Materials · doi:10.1038/nmat2930 · Cited by 676
Self-citationCalcium phosphate cements for bone substitution: Chemistry, handling and mechanical properties
Zhang, J., Liu, W., Schnitzler, V., Tancret, F., & Bouler, J.-M. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.11.001 · Cited by 667
Multiscale Toughening Mechanisms in Biological Materials and Bioinspired Designs
Huang, W., Restrepo, D., Jung, J., Su, F. Y., Liu, Z., Ritchie, R. O., McKittrick, J., Zavattieri, P., & Kisailus, D. (2019) · Advanced Materials · doi:10.1002/adma.201901561 · Cited by 662
Self-citationChatterjee, S., Nafezarefi, F., Tai, N. H., Schlagenhauf, L., Nüesch, F. A., & Chu, B. T. T. (2012) · Carbon · doi:10.1016/j.carbon.2012.07.021 · Cited by 659
Layered Machinable and Electrically Conductive Ti2AlC and Ti3AlC2 Ceramics: a Review
Wang, X. H., & Zhou, Y. C. (2010) · Journal of Materials Science & Technology · doi:10.1016/s1005-0302(10)60064-3 · Cited by 655
An overview of tailoring strain delocalization for strength-ductility synergy
Wu, H., & Fan, G. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100675 · Cited by 536
Qian, L., & Zhang, H. (2011) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.2495 · Cited by 509
Surface and Interface Engineering for Nanocellulosic Advanced Materials
Yang, X., Biswas, S. K., Han, J., Tanpichai, S., Li, M., Chen, C., Zhu, S., Das, A. K., & Yano, H. (2021) · Advanced Materials · doi:10.1002/adma.202002264 · Cited by 497
Defect engineering in thermoelectric materials: what have we learned?
Zheng, Y., Slade, T. J., Hu, L., Tan, X. Y., Luo, Y., Luo, Z.-Z., Xu, J., Yan, Q., & Kanatzidis, M. G. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00347j · Cited by 482
Nanocellulose: Recent Fundamental Advances and Emerging Biological and Biomimicking Applications
Heise, K., Kontturi, E., Allahverdiyeva, Y., Tammelin, T., Linder, M. B., Nonappa, & Ikkala, O. (2021) · Advanced Materials · doi:10.1002/adma.202004349 · Cited by 425
Anomalous scaling law of strength and toughness of cellulose nanopaper
Zhu, H., Zhu, S., Jia, Z., Parvinian, S., Li, Y., Vaaland, O., Hu, L., & Li, T. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1502870112 · Cited by 424
Tablet-level origin of toughening in abalone shells and translation to synthetic composite materials
Espinosa, H. D., Juster, A. L., Latourte, F. J., Loh, O. Y., Gregoire, D., & Zavattieri, P. D. (2011) · Nature Communications · doi:10.1038/ncomms1172 · Cited by 411
Cracks, microcracks and fracture in polymer structures: Formation, detection, autonomic repair
Awaja, F., Zhang, S., Tripathi, M., Nikiforov, A., & Pugno, N. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2016.07.007 · Cited by 402
Transition-metal coordinate bonds for bioinspired macromolecules with tunable mechanical properties
Khare, E., Holten-Andersen, N., & Buehler, M. J. (2021) · Nature Reviews Materials · doi:10.1038/s41578-020-00270-z · Cited by 353
Shape Memory and Superelastic Ceramics at Small Scales
Lai, A., Du, Z., Gan, C. L., & Schuh, C. A. (2013) · Science · doi:10.1126/science.1239745 · Cited by 342
Discontinuous crack-bridging model for fracture toughness analysis of nacre
Shao, Y., Zhao, H.-P., Feng, X.-Q., & Gao, H. (2012) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2012.04.011 · Cited by 335
Designing highly toughened hybrid composites through nature-inspired hierarchical complexity
Launey, M. E., Munch, E., Alsem, D. H., Barth, H. B., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2009) · Acta Materialia · doi:10.1016/j.actamat.2009.03.003 · Cited by 333
Self-citationWang, J., Cheng, Q., Lin, L., & Jiang, L. (2014) · ACS Nano · doi:10.1021/nn406428n · Cited by 325
Du, X., & Qiao, S. Z. (2015) · Small · doi:10.1002/smll.201401201 · Cited by 302
Development of advanced high heat flux and plasma-facing materials
Linsmeier, C., Rieth, M., Aktaa, J., Chikada, T., Hoffmann, A., Hoffmann, J., Houben, A., Kurishita, H., Jin, X., Li, M., et al. (2017) · Nuclear Fusion · doi:10.1088/1741-4326/aa6f71 · Cited by 300
A novel biomimetic approach to the design of high-performance ceramic–metal composites
Launey, M. E., Munch, E., Alsem, D. H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2010) · Journal of The Royal Society Interface · doi:10.1098/rsif.2009.0331 · Cited by 294
Self-citationHigh‐Strength and High‐Ductility Nanostructured and Amorphous Metallic Materials
Kou, H., Lu, J., & Li, Y. (2014) · Advanced Materials · doi:10.1002/adma.201401595 · Cited by 283
Fang, M., Zhang, Z., Li, J., Zhang, H., Lu, H., & Yang, Y. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm01620a · Cited by 275
Functional Adhesive Surfaces with “Gecko” Effect: The Concept of Contact Splitting
Kamperman, M., Kroner, E., del Campo, A., McMeeking, R. M., & Arzt, E. (2010) · Advanced Engineering Materials · doi:10.1002/adem.201000104 · Cited by 274
Zhang, M., Zhao, N., Yu, Q., Liu, Z., Qu, R., Zhang, J., Li, S., Ren, D., Berto, F., Zhang, Z., et al. (2022) · Nature Communications · doi:10.1038/s41467-022-30873-9 · Cited by 267
Self-citationThe hidden structure of human enamel
Beniash, E., Stifler, C. A., Sun, C.-Y., Jung, G. S., Qin, Z., Buehler, M. J., & Gilbert, P. U. P. A. (2019) · Nature Communications · doi:10.1038/s41467-019-12185-7 · Cited by 265
Toughness amplification in natural composites
Barthelat, F., & Rabiei, R. (2011) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2011.01.001 · Cited by 265
Dole, N. S., Mazur, C. M., Acevedo, C., Lopez, J. P., Monteiro, D. A., Fowler, T. W., Gludovatz, B., Walsh, F., Regan, J. N., Messina, S., et al. (2017) · Cell Reports · doi:10.1016/j.celrep.2017.10.115 · Cited by 173
Self-citationZimmermann, E. A., Gludovatz, B., Schaible, E., Busse, B., & Ritchie, R. O. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.03.066 · Cited by 163
Self-citationMussel-inspired functionalization of carbon nanotubes for hydroxyapatite mineralization
Lee, M., Ku, S. H., Ryu, J., & Park, C. B. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm01339k · Cited by 93
Gruber, M., Konetschnik, R., Popov, M., Spitaler, J., Supancic, P., Kiener, D., & Bermejo, R. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.03.020 · Cited by 31
Metadata
- Authors
- Launey, M. E., & Ritchie, R. O.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2009-05-21
- Volume
- 21
- Issue
- 20
- Pages
- 2103-2110
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2107613574
- Cited by
- 967
- References
- 37
- FWCI
- 35.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.