The DOI matches its Crossref record; 133 of the 133 references it cites were found in a registry or an index.
Recent Advances and Prospects of Cathode Materials for Sodium‐Ion Batteries
Abstract
Sodium‐ion batteries (SIBs) receive significant attention for electrochemical energy storage and conversion owing to their wide availability and the low cost of Na resources. However, SIBs face challenges of low specific energy, short cycling life, and insufficient specific power, owing to the heavy mass and large radius of Na+ ions. As an important component of SIBs, cathode materials have a significant effect on the SIB electrochemical performance. The most recent advances and prospects of inorganic and organic cathode materials are summarized here. Among current cathode materials, layered transition‐metal oxides achieve high specific energies around 600 mW h g−1 owing to their high specific capacities of 180–220 mA h g−1 and their moderate operating potentials of 2.7–3.2 V (vs Na+/Na). Porous Na 3 V 2(PO 4)3/C nanomaterials exhibit excellent cycling performance with almost 100% retention over 1000 cycles owing to their robust structural framework. Recent emerging cathode materials, such as amorphous NaFePO 4 and pteridine derivatives show interesting electrochemical properties and attractive prospects for application in SIBs. Future work should focus on strategies to enhance the overall performance of cathode materials in terms of specific energy, cycling life, and rate capability with cationic doping, anionic substitution, morphology fabrication, and electrolyte matching.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
Research Development on Sodium-Ion Batteries
Yabuuchi, N., Kubota, K., Dahbi, M., & Komaba, S. (2014) · Chemical Reviews · doi:10.1021/cr500192f · Cited by 6,478
Slater, M. D., Kim, D., Lee, E., & Johnson, C. S. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200691 · Cited by 4,518
Na-ion batteries, recent advances and present challenges to become low cost energy storage systems
Palomares, V., Serras, P., Villaluenga, I., Hueso, K. B., Carretero-González, J., & Rojo, T. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02781j · Cited by 3,564
Kim, S., Seo, D., Ma, X., Ceder, G., & Kang, K. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200026 · Cited by 3,370
Room-temperature stationary sodium-ion batteries for large-scale electric energy storage
Pan, H., Hu, Y.-S., & Chen, L. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40847g · Cited by 3,319
P2-type Nax[Fe1/2Mn1/2]O2 made from earth-abundant elements for rechargeable Na batteries
Yabuuchi, N., Kajiyama, M., Iwatate, J., Nishikawa, H., Hitomi, S., Okuyama, R., Usui, R., Yamada, Y., & Komaba, S. (2012) · Nature Materials · doi:10.1038/nmat3309 · Cited by 2,270
The Emerging Chemistry of Sodium Ion Batteries for Electrochemical Energy Storage
Kundu, D., Talaie, E., Duffort, V., & Nazar, L. F. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410376 · Cited by 2,068
Electrochemically Active Polymers for Rechargeable Batteries
Novák, P., Müller, K., Santhanam, K. S. V., & Haas, O. (1997) · Chemical Reviews · doi:10.1021/cr941181o · Cited by 1,618
Sodium and sodium-ion energy storage batteries
Ellis, B. L., & Nazar, L. F. (2012) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2012.04.002 · Cited by 1,460
Towards sustainable and versatile energy storage devices: an overview of organic electrode materials
Song, Z., & Zhou, H. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40709h · Cited by 1,443
A comprehensive review of sodium layered oxides: powerful cathodes for Na-ion batteries
Han, M. H., Gonzalo, E., Singh, G., & Rojo, T. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03192j · Cited by 1,380
Organic Electrode Materials for Rechargeable Lithium Batteries
Liang, Y., Tao, Z., & Chen, J. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100795 · Cited by 1,276
Self-citationElectrochemical investigation of the P2–NaxCoO2 phase diagram
Berthelot, R., Carlier, D., & Delmas, C. (2011) · Nature Materials · doi:10.1038/nmat2920 · Cited by 1,232
Prussian blue: a new framework of electrode materials for sodium batteries
Lu, Y., Wang, L., Cheng, J., & Goodenough, J. B. (2012) · Chemical Communications · doi:10.1039/c2cc31777j · Cited by 1,162
You, Y., Wu, X.-L., Yin, Y.-X., & Guo, Y.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee44004d · Cited by 1,101
Nickel Hexacyanoferrate Nanoparticle Electrodes For Aqueous Sodium and Potassium Ion Batteries
Wessells, C. D., Peddada, S. V., Huggins, R. A., & Cui, Y. (2011) · Nano Letters · doi:10.1021/nl203193q · Cited by 1,074
Conjugated dicarboxylate anodes for Li-ion batteries
Armand, M., Grugeon, S., Vezin, H., Laruelle, S., Ribière, P., Poizot, P., & Tarascon, J.-M. (2009) · Nature Materials · doi:10.1038/nmat2372 · Cited by 1,021
Copper hexacyanoferrate battery electrodes with long cycle life and high power
Wessells, C. D., Huggins, R. A., & Cui, Y. (2011) · Nature Communications · doi:10.1038/ncomms1563 · Cited by 1,001
Jian, Z., Han, W., Lu, X., Yang, H., Hu, Y., Zhou, J., Zhou, Z., Li, J., Chen, W., Chen, D., et al. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200558 · Cited by 970
In search of an optimized electrolyte for Na-ion batteries
Ponrouch, A., Marchante, E., Courty, M., Tarascon, J.-M., & Palacín, M. R. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22258b · Cited by 968
A 3.8-V earth-abundant sodium battery electrode
Barpanda, P., Oyama, G., Nishimura, S.-I., Chung, S.-C., & Yamada, A. (2014) · Nature Communications · doi:10.1038/ncomms5358 · Cited by 873
Nanostructured Mn-based oxides for electrochemical energy storage and conversion
Zhang, K., Han, X., Hu, Z., Zhang, X., Tao, Z., & Chen, J. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00218k · Cited by 859
Self-citationAn Amorphous Red Phosphorus/Carbon Composite as a Promising Anode Material for Sodium Ion Batteries
Kim, Y., Park, Y., Choi, A., Choi, N., Kim, J., Lee, J., Ryu, J. H., Oh, S. M., & Lee, K. T. (2013) · Advanced Materials · doi:10.1002/adma.201204877 · Cited by 854
Komaba, S., Yabuuchi, N., Nakayama, T., Ogata, A., Ishikawa, T., & Nakai, I. (2012) · Inorganic Chemistry · doi:10.1021/ic300357d · Cited by 822
Saravanan, K., Mason, C. W., Rudola, A., Wong, K. H., & Balaya, P. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200803 · Cited by 810
Carbon coated Na3V2(PO4)3 as novel electrode material for sodium ion batteries
Jian, Z., Zhao, L., Pan, H., Hu, Y.-S., Li, H., Chen, W., & Chen, L. (2012) · Electrochemistry Communications · doi:10.1016/j.elecom.2011.11.009 · Cited by 804
Poizot, P., & Dolhem, F. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00731e · Cited by 771
High Capacity and Rate Capability of Amorphous Phosphorus for Sodium Ion Batteries
Qian, J., Wu, X., Cao, Y., Ai, X., & Yang, H. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201209689 · Cited by 696
Electrochemical Properties of Monoclinic NaMnO2
Ma, X., Chen, H., & Ceder, G. (2011) · Journal of The Electrochemical Society · doi:10.1149/2.035112jes · Cited by 674
Negative electrodes for Na-ion batteries
Dahbi, M., Yabuuchi, N., Kubota, K., Tokiwa, K., & Komaba, S. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp00826j · Cited by 623
A high-rate and long cycle life aqueous electrolyte battery for grid-scale energy storage
Pasta, M., Wessells, C. D., Huggins, R. A., & Cui, Y. (2012) · Nature Communications · doi:10.1038/ncomms2139 · Cited by 611
High‐Capacity Anode Materials for Sodium‐Ion Batteries
Kim, Y., Ha, K., Oh, S. M., & Lee, K. T. (2014) · Chemistry – A European Journal · doi:10.1002/chem.201402511 · Cited by 595
Wang, Y., Xiao, R., Hu, Y.-S., Avdeev, M., & Chen, L. (2015) · Nature Communications · doi:10.1038/ncomms7954 · Cited by 592
Kim, H., Park, I., Seo, D.-H., Lee, S., Kim, S.-W., Kwon, W. J., Park, Y.-U., Kim, C. S., Jeon, S., & Kang, K. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3038646 · Cited by 592
Lee, H.-W., Wang, R. Y., Pasta, M., Woo Lee, S., Liu, N., & Cui, Y. (2014) · Nature Communications · doi:10.1038/ncomms6280 · Cited by 590
Electrochemical intercalation activity of layered NaCrO2 vs. LiCrO2
Komaba, S., Takei, C., Nakayama, T., Ogata, A., & Yabuuchi, N. (2010) · Electrochemistry Communications · doi:10.1016/j.elecom.2009.12.033 · Cited by 579
Zhao, L., Zhao, J., Hu, Y., Li, H., Zhou, Z., Armand, M., & Chen, L. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200166 · Cited by 568
Sathiya, M., Hemalatha, K., Ramesha, K., Tarascon, J.-M., & Prakash, A. S. (2012) · Chemistry of Materials · doi:10.1021/cm300466b · Cited by 564
Nano active materials for lithium-ion batteries
Wang, Y., Li, H., He, P., Hosono, E., & Zhou, H. (2010) · Nanoscale · doi:10.1039/c0nr00068j · Cited by 550
Li, S., Dong, Y., Xu, L., Xu, X., He, L., & Mai, L. (2014) · Advanced Materials · doi:10.1002/adma.201305522 · Cited by 526
Towards high energy density sodium ion batteries through electrolyte optimization
Ponrouch, A., Dedryvère, R., Monti, D., Demet, A. E., Ateba Mba, J. M., Croguennec, L., Masquelier, C., Johansson, P., & Palacín, M. R. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41379a · Cited by 520
Sodium Terephthalate as an Organic Anode Material for Sodium Ion Batteries
Park, Y., Shin, D., Woo, S. H., Choi, N. S., Shin, K. H., Oh, S. M., Lee, K. T., & Hong, S. Y. (2012) · Advanced Materials · doi:10.1002/adma.201201205 · Cited by 517
Structure and Stability of Sodium Intercalated Phases in Olivine FePO4
Moreau, P., Guyomard, D., Gaubicher, J., & Boucher, F. (2010) · Chemistry of Materials · doi:10.1021/cm101377h · Cited by 517
Nokami, T., Matsuo, T., Inatomi, Y., Hojo, N., Tsukagoshi, T., Yoshizawa, H., Shimizu, A., Kuramoto, H., Komae, K., Tsuyama, H., et al. (2012) · Journal of the American Chemical Society · doi:10.1021/ja306663g · Cited by 517
Zhu, C., Song, K., van Aken, P. A., Maier, J., & Yu, Y. (2014) · Nano Letters · doi:10.1021/nl500548a · Cited by 504
Na 0.67 Mn 1−x Mg x O 2 (0 ≤ x ≤ 0.2): a high capacity cathode for sodium-ion batteries
Billaud, J. M., Singh, G., Armstrong, A. R., Gonzalo, E. C., Владимирович, Р. В., Armand, M. B., Rojo, T., & Bruce, P. G. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00465e · Cited by 486
Towards High Power High Energy Aqueous Sodium‐Ion Batteries: The NaTi2(PO4)3/Na0.44MnO2 System
Li, Z., Young, D., Xiang, K., Carter, W. C., & Chiang, Y. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200598 · Cited by 480
Study of the Insertion/Deinsertion Mechanism of Sodium into Na0.44MnO2
Sauvage, F., Laffont, L., Tarascon, J. ‐., & Baudrin, E. (2007) · Inorganic Chemistry · doi:10.1021/ic0700250 · Cited by 470
Recent developments in electrode materials for sodium-ion batteries
Wang, L. P., Yu, L., Wang, X., Srinivasan, M., & Xu, Z. J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06467d · Cited by 468
Enabling Sodium Batteries Using Lithium‐Substituted Sodium Layered Transition Metal Oxide Cathodes
Kim, D., Kang, S., Slater, M., Rood, S., Vaughey, J. T., Karan, N., Balasubramanian, M., & Johnson, C. S. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201000061 · Cited by 446
A New High-Energy Cathode for a Na-Ion Battery with Ultrahigh Stability
Park, Y.-U., Seo, D.-H., Kwon, H.-S., Kim, B., Kim, J., Kim, H., Kim, I., Yoo, H.-I., & Kang, K. (2013) · Journal of the American Chemical Society · doi:10.1021/ja406016j · Cited by 442
All Organic Sodium‐Ion Batteries with Na4C8H2O6
Wang, S., Wang, L., Zhu, Z., Hu, Z., Zhao, Q., & Chen, J. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201400032 · Cited by 440
Self-citationExtended π-Conjugated System for Fast-Charge and -Discharge Sodium-Ion Batteries
Wang, C., Xu, Y., Fang, Y., Zhou, M., Liang, L., Singh, S., Zhao, H., Schober, A., & Lei, Y. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b00336 · Cited by 438
Zhu, Z., Hong, M., Guo, D., Shi, J., Tao, Z., & Chen, J. (2014) · Journal of the American Chemical Society · doi:10.1021/ja507852t · Cited by 437
Self-citationReversible NaFePO4 electrode for sodium secondary batteries
Oh, S.-M., Myung, S., Hassoun, J., Scrosati, B., & Sun, Y. (2012) · Electrochemistry Communications · doi:10.1016/j.elecom.2012.06.014 · Cited by 425
β-NaMnO 2 : A High-Performance Cathode for Sodium-Ion Batteries
Billaud, J. M., Clément, R. J., Armstrong, A. R., Canales‐Vázquez, J., Rozier, P., Grey, C. P., & Bruce, P. G. (2014) · Journal of the American Chemical Society · doi:10.1021/ja509704t · Cited by 422
Atomic Structure and Kinetics of NASICON NaxV2(PO4)3 Cathode for Sodium‐Ion Batteries
Jian, Z., Yuan, C., Han, W., Lu, X., Gu, L., Xi, X., Hu, Y., Li, H., Chen, W., Chen, D., et al. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400173 · Cited by 417
Na 3 V 2 (PO 4 ) 3 @C core–shell nanocomposites for rechargeable sodium-ion batteries
Duan, W., Zhu, Z., Li, H., Hu, Z., Zhang, K., Cheng, F., & Chen, J. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta00106k · Cited by 411
Self-citationCrystal Structures and Electrode Performance of Alpha-NaFeO2 for Rechargeable Sodium Batteries
YABUUCHI, N., YOSHIDA, H., & KOMABA, S. (2012) · Electrochemistry · doi:10.5796/electrochemistry.80.716 · Cited by 411
Kim, H., Shakoor, R. A., Park, C., Lim, S. Y., Kim, J., Jo, Y. N., Cho, W., Miyasaka, K., Kahraman, R., Jung, Y., et al. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201201589 · Cited by 407
An Organic Pigment as a High‐Performance Cathode for Sodium‐Ion Batteries
Luo, W., Allen, M., Raju, V., & Ji, X. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400554 · Cited by 406
Kim, J., Seo, D.-H., Kim, H., Park, I., Yoo, J.-K., Jung, S.-K., Park, Y.-U., Goddard III, W. A., & Kang, K. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03215b · Cited by 398
Organic Li4C8H2O6 Nanosheets for Lithium-Ion Batteries
Wang, S., Wang, L., Zhang, K., Zhu, Z., Tao, Z., & Chen, J. (2013) · Nano Letters · doi:10.1021/nl402239p · Cited by 398
Self-citationTin Phosphide as a Promising Anode Material for Na‐Ion Batteries
Kim, Y., Kim, Y., Choi, A., Woo, S., Mok, D., Choi, N., Jung, Y. S., Ryu, J. H., Oh, S. M., & Lee, K. T. (2014) · Advanced Materials · doi:10.1002/adma.201305638 · Cited by 393
Na2FeP2O7: A Safe Cathode for Rechargeable Sodium-ion Batteries
Barpanda, P., Liu, G., Ling, C. D., Tamaru, M., Avdeev, M., Chung, S., Yamada, Y., & Yamada, A. (2013) · Chemistry of Materials · doi:10.1021/cm401657c · Cited by 384
A Sodium-Ion Cell Based on the Fluorophosphate Compound NaVPO[sub 4]F
Barker, J., Saidi, M. Y., & Swoyer, J. L. (2003) · Electrochemical and Solid-State Letters · doi:10.1149/1.1523691 · Cited by 370
Aromatic porous-honeycomb electrodes for a sodium-organic energy storage device
Sakaushi, K., Hosono, E., Nickerl, G., Gemming, T., Zhou, H., Kaskel, S., & Eckert, J. (2013) · Nature Communications · doi:10.1038/ncomms2481 · Cited by 366
A combined first principles and experimental study on Na3V2(PO4)2F3 for rechargeable Na batteries
Shakoor, R. A., Seo, D.-H., Kim, H., Park, Y.-U., Kim, J., Kim, S.-W., Gwon, H., Lee, S., & Kang, K. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm33862a · Cited by 365
Sodium iron pyrophosphate: A novel 3.0 V iron-based cathode for sodium-ion batteries
Barpanda, P., Ye, T., Nishimura, S.-I., Chung, S.-C., Yamada, Y., Okubo, M., Zhou, H., & Yamada, A. (2012) · Electrochemistry Communications · doi:10.1016/j.elecom.2012.08.028 · Cited by 362
Park, Y., Seo, D., Kim, H., Kim, J., Lee, S., Kim, B., & Kang, K. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400561 · Cited by 351
Ellis, B. L., Makahnouk, W. R. M., Rowan-Weetaluktuk, W. N., Ryan, D. H., & Nazar, L. F. (2010) · Chemistry of Materials · doi:10.1021/cm902023h · Cited by 341
Huang, W., Zhu, Z., Wang, L., Wang, S., Li, H. M., Tao, Z., Shi, J., Guan, L., & Chen, J. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201302586 · Cited by 330
Self-citationYuan, D., Wang, Y. X., Cao, Y., Ai, X. P., & Yang, H. X. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00594 · Cited by 330
Electrochemical Properties of Monoclinic NaNiO2
Vassilaras, P., Ma, X., Li, X., & Ceder, G. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.023302jes · Cited by 316
Oh, S.-M., Myung, S.-T., Yoon, C. S., Lu, J., Hassoun, J., Scrosati, B., Amine, K., & Sun, Y.-K. (2014) · Nano Letters · doi:10.1021/nl500077v · Cited by 314
Biologically inspired pteridine redox centres for rechargeable batteries
Hong, J., Lee, M., Lee, B., Seo, D.-H., Park, C. B., & Kang, K. (2014) · Nature Communications · doi:10.1038/ncomms6335 · Cited by 307
Hwang, J., Oh, S.-M., Myung, S., Chung, K. Y., Belharouak, I., & Sun, Y. (2015) · Nature Communications · doi:10.1038/ncomms7865 · Cited by 306
Electrospun Na3V2(PO4)3/C nanofibers as stable cathode materials for sodium-ion batteries
Liu, J., Tang, K., Song, K., van Aken, P. A., Yu, Y., & Maier, J. (2014) · Nanoscale · doi:10.1039/c3nr05329f · Cited by 296
Mesoporous Prussian Blue Analogues: Template‐Free Synthesis and Sodium‐Ion Battery Applications
Yue, Y., Binder, A. J., Guo, B., Zhang, Z., Qiao, Z., Tian, C., & Dai, S. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201310679 · Cited by 296
A Honeycomb‐Layered Na3Ni2SbO6: A High‐Rate and Cycle‐Stable Cathode for Sodium‐Ion Batteries
Yuan, D., Liang, X., Wu, L., Cao, Y., Ai, X., Feng, J., & Yang, H. (2014) · Advanced Materials · doi:10.1002/adma.201401946 · Cited by 295
Li, H., Yu, X., Bai, Y., Wu, F., Wu, C., Liu, L.-Y., & Yang, X.-Q. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00277j · Cited by 291
Bianchini, M., Fauth, F., Brisset, N., Weill, F., Suard, E., Masquelier, C., & Croguennec, L. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00361 · Cited by 291
Na-ion mobility in layered Na2FePO4F and olivine Na[Fe,Mn]PO4
Tripathi, R., Wood, S. M., Islam, M. S., & Nazar, L. F. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40914g · Cited by 282
Graphene-supported Na3V2(PO4)3 as a high rate cathode material for sodium-ion batteries
Jung, Y. H., Lim, C. H., & Kim, D. K. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta12116j · Cited by 279
Sodium insertion in carboxylate based materials and their application in 3.6 V full sodium cells
Abouimrane, A., Weng, W., Eltayeb, H., Cui, Y., Niklas, J., Poluektov, O., & Amine, K. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22864e · Cited by 273
Performance of NASICON Symmetric Cell with Ionic Liquid Electrolyte
Plashnitsa, L. S., Kobayashi, E., Noguchi, Y., Okada, S., & Yamaki, J.-I. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3298903 · Cited by 272
A zero-strain insertion cathode material of nickel ferricyanide for sodium-ion batteries
You, Y., Wu, X.-L., Yin, Y.-X., & Guo, Y.-G. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta13223d · Cited by 265
Suga, T., Sugita, S., Ohshiro, H., Oyaizu, K., & Nishide, H. (2011) · Advanced Materials · doi:10.1002/adma.201003525 · Cited by 259
Na3V2(PO4)2F3 Revisited: A High-Resolution Diffraction Study
Bianchini, M., Brisset, N., Fauth, F., Weill, F., Elkaim, E., Suard, E., Masquelier, C., & Croguennec, L. (2014) · Chemistry of Materials · doi:10.1021/cm501644g · Cited by 240
Uptake of CO2 in Layered P2-Na0.67Mn0.5Fe0.5O2: Insertion of Carbonate Anions
Duffort, V., Talaie, E., Black, R., & Nazar, L. F. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00097 · Cited by 234
Yabuuchi, N., Yano, M., Yoshida, H., Kuze, S., & Komaba, S. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.018305jes · Cited by 230
Crystal chemistry of Na insertion/deinsertion in FePO4–NaFePO4
Casas-Cabanas, M., Roddatis, V. V., Saurel, D., Kubiak, P., Carretero-González, J., Palomares, V., Serras, P., & Rojo, T. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm33639a · Cited by 229
Xia, X., & Dahn, J. R. (2011) · Electrochemical and Solid-State Letters · doi:10.1149/2.002201esl · Cited by 221
New Insight into Structural Evolution in Layered NaCrO2 during Electrochemical Sodium Extraction
Kubota, K., Ikeuchi, I., Nakayama, T., Takei, C., Yabuuchi, N., Shiiba, H., Nakayama, M., & Komaba, S. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp5105888 · Cited by 214
Cathode properties of Na3M2(PO4)2F3 [M = Ti, Fe, V] for sodium-ion batteries
Chihara, K., Kitajou, A., Gocheva, I. D., Okada, S., & Yamaki, J.-I. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.034 · Cited by 203
High rate performance of a Na3V2(PO4)3/C cathode prepared by pyro-synthesis for sodium-ion batteries
Kang, J., Baek, S., Mathew, V., Gim, J., Song, J., Park, H., Chae, E., Rai, A. K., & Kim, J. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm34451c · Cited by 200
Song, W., Ji, X., Wu, Z., Yang, Y., Zhou, Z., Li, F., Chen, Q., & Banks, C. E. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.025 · Cited by 198
Sauvage, F., Quarez, E., Tarascon, J.-M., & Baudrin, E. (2006) · Solid State Sciences · doi:10.1016/j.solidstatesciences.2006.05.009 · Cited by 197
A new polymorph of Na2MnP2O7 as a 3.6 V cathode material for sodium-ion batteries
Barpanda, P., Ye, T., Avdeev, M., Chung, S.-C., & Yamada, A. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta10210f · Cited by 196
Park, C. S., Kim, H., Shakoor, R. A., Yang, E., Lim, S. Y., Kahraman, R., Jung, Y., & Choi, J. W. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312044k · Cited by 194
A sodium manganese ferrocyanide thin film for Na-ion batteries
Matsuda, T., Takachi, M., & Moritomo, Y. (2013) · Chemical Communications · doi:10.1039/c3cc38839e · Cited by 192
Genorio, B., Pirnat, K., Cerc-Korošec, R., Dominko, R., & Gaberšček, M. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201001539 · Cited by 178
A Composite Gel–Polymer/Glass–Fiber Electrolyte for Sodium‐Ion Batteries
Gao, H., Guo, B., Song, J., Park, K., & Goodenough, J. B. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402235 · Cited by 178
α-Na3M2(PO4)3 (M = Ti, Fe): Absolute Cationic Ordering in NASICON-Type Phases
Kabbour, H., Coillot, D., Colmont, M., Masquelier, C., & Mentré, O. (2011) · Journal of the American Chemical Society · doi:10.1021/ja204321y · Cited by 175
Dong, Y., Li, S., Zhao, K., Han, C., Chen, W., Wang, B., Wang, L., Xu, B., Wei, Q., Zhang, L., et al. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00036j · Cited by 173
Aragón, M. J., Lavela, P., Ortiz, G. F., & Tirado, J. L. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0151502jes · Cited by 170
Ding, J. J., Zhou, Y. N., Sun, Q., Yu, X. Q., Yang, X. Q., & Fu, Z. W. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2012.09.058 · Cited by 163
A new low-voltage plateau of Na3V2(PO4)3as an anode for Na-ion batteries
Jian, Z., Sun, Y., & Ji, X. (2015) · Chemical Communications · doi:10.1039/c5cc00944h · Cited by 161
Pang, W. K., Kalluri, S., Peterson, V. K., Sharma, N., Kimpton, J. A., Johannessen, B., Liu, H., Dou, S. X., & Guo, Z. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00943 · Cited by 160
Kalluri, S., Seng, K. H., Pang, W. K., Guo, Z., Chen, Z., Liu, H., & Dou, S. X. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502343s · Cited by 150
Zhang, S., Huang, W., Hu, P., Huang, C., Shang, C., Zhang, C., Yang, R., & Cui, G. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta06058j · Cited by 148
Cathode properties of Na2C6O6 for sodium-ion batteries
Chihara, K., Chujo, N., Kitajou, A., & Okada, S. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.04.100 · Cited by 142
The preparation of NaV1−xCrxPO4F cathode materials for sodium-ion battery
Zhuo, H., Wang, X., Tang, A., Liu, Z., Gamboa, S. A., & Sebastian, P. J. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.12.079 · Cited by 142
Song, W., Cao, X., Wu, Z., Chen, J., Zhu, Y., Hou, H., Lan, Q., & Ji, X. (2014) · Langmuir · doi:10.1021/la5025444 · Cited by 134
Self-citationSong, W., Cao, X., Wu, Z., Chen, J., Huangfu, K., Wang, X., Huang, Y., & Ji, X. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp01821d · Cited by 130
Self-citationWang, Q., Zhao, B., Zhang, S., Gao, X., & Deng, C. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00765h · Cited by 129
Shen, W., Wang, C., Liu, H., & Yang, W. (2013) · Chemistry - A European Journal · doi:10.1002/chem.201300005 · Cited by 121
Guo, S., Yu, H., Jian, Z., Liu, P., Zhu, Y., Guo, X., Chen, M. W., Ishida, M., & Zhou, H. S. (2014) · ChemSusChem · doi:10.1002/cssc.201402138 · Cited by 115
Biochemistry-Enabled 3D Foams for Ultrafast Battery Cathodes
Zhou, Y., Rui, X., Sun, W., Xu, Z. J., Zhou, Y. C., Ng, W. J., Yan, Q., & Fong, E. W. M. (2015) · ACS Nano · doi:10.1021/acsnano.5b00932 · Cited by 111
Yang, J., Han, D., Jo, M. R., Song, K., Kim, Y., Chou, S., Liu, H., & Kang, Y. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta06001f · Cited by 107
Chen, C.-Y., Matsumoto, K., Nohira, T., Hagiwara, R., Fukunaga, A., Sakai, S., Nitta, K., & Inazawa, S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.006 · Cited by 104
Zhu, Z., Li, H., Liang, J., Tao, Z., & Chen, J. (2014) · Chemical Communications · doi:10.1039/c4cc08220f · Cited by 103
Self-citationJang, J. Y., Kim, H., Lee, Y., Lee, K. T., Kang, K., & Choi, N. (2014) · Electrochemistry Communications · doi:10.1016/j.elecom.2014.05.003 · Cited by 93
Ruan, Y., Wang, K., Song, S., Han, X., & Cheng, B. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.01.186 · Cited by 91
Kawabe, Y., Yabuuchi, N., Kajiyama, M., Fukuhara, N., Inamasu, T., Okuyama, R., Nakai, I., & Komaba, S. (2012) · Electrochemistry · doi:10.5796/electrochemistry.80.80 · Cited by 87
Synthesis, characterization, and electrochemical studies of chemically synthesized NaFePO4
Sun, A., Beck, F. R., Haynes, D. J., Poston, J., Narayanan, S. R., Kumta, P. N., & Manivannan, A. (2012) · Materials Science and Engineering B · doi:10.1016/j.mseb.2012.08.004 · Cited by 78
Kataoka, R., Mukai, T., Yoshizawa, A., & Sakai, T. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.125306jes · Cited by 63
Zhan, P., Wang, S., Yuan, Y. P., Jiao, K., & Jiao, S. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0891506jes · Cited by 57
α-NaFeO2: ionic conductivity and sodium extraction
Blesa, M. C., Morán, E., Leon, C., Santamaria, J., Tornero, J. D., & Menéndez, N. (1999) · Solid State Ionics · doi:10.1016/s0167-2738(99)00145-9 · Cited by 42
Su, J., Pei, Y., Yang, Z., & Wang, X. (2014) · Computational Materials Science · doi:10.1016/j.commatsci.2014.11.021 · Cited by 42
Micro-nano structure Na2MnPO4F/C as cathode material with excellent sodium storage properties
Zhong, Y., Wu, Z., Tang, Y., Xiang, W., Guo, X., & Zhong, B. (2015) · Materials Letters · doi:10.1016/j.matlet.2015.01.110 · Cited by 39
Cited by
Sodium-ion batteries: present and future
Hwang, J.-Y., Myung, S.-T., & Sun, Y.-K. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00776g · Cited by 5,305
From Lithium‐Ion to Sodium‐Ion Batteries: Advantages, Challenges, and Surprises
Nayak, P. K., Yang, L., Brehm, W., & Adelhelm, P. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201703772 · Cited by 2,674
Tian, Y., Zeng, G., Rutt, A., Shi, T., Kim, H., Wang, J., Koettgen, J., Sun, Y., Ouyang, B., Chen, T., et al. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00767 · Cited by 1,614
Chen, H., Ling, M., Hencz, L., Ling, H. Y., Li, G., Lin, Z., Liu, G., & Zhang, S. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00241 · Cited by 958
Hu, Z., Liu, Q., Chou, S., & Dou, S. (2017) · Advanced Materials · doi:10.1002/adma.201700606 · Cited by 911
Metadata
- Authors
- Xiang, X., Zhang, K., & Chen, J.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2015-08-14
- Volume
- 27
- Issue
- 36
- Pages
- 5343-5364
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W1819431993
- Cited by
- 1,160
- References
- 133
- FWCI
- 63.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.