The DOI matches its Crossref record; 103 of the 103 references it cites were found in a registry or an index.
Additive Manufacturing of Metal Structures at the Micrometer Scale
Abstract
Currently, the focus of additive manufacturing (AM) is shifting from simple prototyping to actual production. One driving factor of this process is the ability of AM to build geometries that are not accessible by subtractive fabrication techniques. While these techniques often call for a geometry that is easiest to manufacture, AM enables the geometry required for best performance to be built by freeing the design process from restrictions imposed by traditional machining. At the micrometer scale, the design limitations of standard fabrication techniques are even more severe. Microscale AM thus holds great potential, as confirmed by the rapid success of commercial micro‐stereolithography tools as an enabling technology for a broad range of scientific applications. For metals, however, there is still no established AM solution at small scales. To tackle the limited resolution of standard metal AM methods (a few tens of micrometers at best), various new techniques aimed at the micrometer scale and below are presently under development. Here, we review these recent efforts. Specifically, we feature the techniques of direct ink writing, electrohydrodynamic printing, laser‐assisted electrophoretic deposition, laser‐induced forward transfer, local electroplating methods, laser‐induced photoreduction and focused electron or ion beam induced deposition. Although these methods have proven to facilitate the AM of metals with feature sizes in the range of 0.1–10 µm, they are still in a prototype stage and their potential is not fully explored yet. For instance, comprehensive studies of material availability and material properties are often lacking, yet compulsory for actual applications. We address these items while critically discussing and comparing the potential of current microscale metal AM techniques.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
A revolution in optical manipulation
Grier, D. G. (2003) · Nature · doi:10.1038/nature01935 · Cited by 5,123
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Materials Science of Thin Films
Ohring, M. (2002) · Elsevier eBooks · doi:10.1016/b978-0-12-524975-1.x5000-9 · Cited by 2,931
Recent Advances in the Liquid-Phase Syntheses of Inorganic Nanoparticles
Cushing, B. L., Kolesnichenko, V. L., & O'Connor, C. J. (2004) · Chemical Reviews · doi:10.1021/cr030027b · Cited by 2,913
Gold Helix Photonic Metamaterial as Broadband Circular Polarizer
Gansel, J. K., Thiel, M., Rill, M. S., Decker, M., Bade, K., Saile, V., von Freymann, G., Linden, S., & Wegener, M. (2009) · Science · doi:10.1126/science.1177031 · Cited by 2,694
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Fundamentals of Microfabrication
Madou, M. J. (2018) · CRC Press eBooks · doi:10.1201/9781482274004 · Cited by 2,020
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
Thompson, M. K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R. I., Gibson, I., Bernard, A., Schulz, J., Graf, P., Ahuja, B., et al. (2016) · CIRP Annals · doi:10.1016/j.cirp.2016.05.004 · Cited by 2,017
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Murr, L. E., Gaytan, S. M., Ramirez, D. A., Martinez, E., Hernandez, J., Amato, K. N., Shindo, P. W., Medina, F. R., & Wicker, R. B. (2012) · Journal of Materials Science & Technology · doi:10.1016/s1005-0302(12)60016-4 · Cited by 1,686
Barnes, H. A. (1997) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/s0377-0257(97)00004-9 · Cited by 1,535
High-resolution electrohydrodynamic jet printing
Park, J.-U., Hardy, M., Kang, S. J., Barton, K., Adair, K., Mukhopadhyay, D. K., Lee, C. Y., Strano, M. S., Alleyne, A. G., Georgiadis, J. G., et al. (2007) · Nature Materials · doi:10.1038/nmat1974 · Cited by 1,492
Electrical Resistivity of Composites
McLachlan, D. S., Blaszkiewicz, M., & Newnham, R. E. (1990) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1990.tb07576.x · Cited by 1,447
A review on 3D micro-additive manufacturing technologies
Vaezi, M., Seitz, H., & Yang, S. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4605-2 · Cited by 1,293
Bos, F., Wolfs, R., Ahmed, Z., & Salet, T. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1209867 · Cited by 1,257
Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes
Ahn, B. Y., Duoss, E. B., Motala, M. J., Guo, X., Park, S.-I., Xiong, Y., Yoon, J., Nuzzo, R. G., Rogers, J. A., & Lewis, J. A. (2009) · Science · doi:10.1126/science.1168375 · Cited by 1,191
Additive manufacturing of metallic components by selective electron beam melting — a review
Körner, C. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1176289 · Cited by 1,106
Optical trapping and manipulation of nanostructures
Maragò, O. M., Jones, P. H., Gucciardi, P. G., Volpe, G., & Ferrari, A. C. (2013) · Nature Nanotechnology · doi:10.1038/nnano.2013.208 · Cited by 1,043
Gas-assisted focused electron beam and ion beam processing and fabrication
Utke, I., Hoffmann, P., & Melngailis, J. (2008) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.2955728 · Cited by 1,026
Multiprocess 3D printing for increasing component functionality
MacDonald, E., & Wicker, R. (2016) · Science · doi:10.1126/science.aaf2093 · Cited by 961
Laser Processing and Chemistry
Bäuerle, D. (2011) · Springer eBooks · doi:10.1007/978-3-642-17613-5 · Cited by 843
Direct Ink Writing of Three‐Dimensional Ceramic Structures
Lewis, J. A., Smay, J. E., Stuecker, J., & Cesarano, J. (2006) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2006.01382.x · Cited by 823
Electrodeposition from Ionic Liquids
(2008) · Wiley eBooks · doi:10.1002/9783527622917 · Cited by 804
Modern Electrochemistry 1: Ionics
Bockris, J. O., & Reddy, A. K. N. (1998) · Springer eBooks · doi:10.1007/b114546 · Cited by 734
Three‐dimensional optical laser lithography beyond the diffraction limit
Fischer, J., & Wegener, M. (2013) · Laser & Photonics Reviews · doi:10.1002/lpor.201100046 · Cited by 709
Approaching theoretical strength in glassy carbon nanolattices
Bauer, J., Schroer, A., Schwaiger, R., & Kraft, O. (2016) · Nature Materials · doi:10.1038/nmat4561 · Cited by 689
Metal deposition from a supported metal film using an excimer laser
Bohandy, J., Kim, B. F., & Adrian, F. J. (1986) · Journal of Applied Physics · doi:10.1063/1.337287 · Cited by 686
3D Printing multifunctionality: structures with electronics
Espalin, D., Muse, D. W., MacDonald, E., & Wicker, R. B. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-5717-7 · Cited by 614
Mechanisms, Capabilities, and Applications of High‐Resolution Electrohydrodynamic Jet Printing
Onses, M. S., Sutanto, E., Ferreira, P. M., Alleyne, A. G., & Rogers, J. A. (2015) · Small · doi:10.1002/smll.201500593 · Cited by 603
CLASSIFICATION OF THE MODES OF EHD SPRAYING
Jaworek, A., & Krupa, A. (1999) · Journal of Aerosol Science · doi:10.1016/s0021-8502(98)00787-3 · Cited by 569
Femtosecond laser three-dimensional micro- and nanofabrication
Sugioka, K., & Cheng, Y. (2014) · Applied Physics Reviews · doi:10.1063/1.4904320 · Cited by 490
Meister, A., Gabi, M., Behr, P., Studer, P., Vörös, J., Niedermann, P., Bitterli, J., Polesel-Maris, J., Liley, M., Heinzelmann, H., et al. (2009) · Nano Letters · doi:10.1021/nl901384x · Cited by 459
Self-citationDong, H., Chen, Y.-C., & Feldmann, C. (2015) · Green Chemistry · doi:10.1039/c5gc00943j · Cited by 455
Optical Properties of Small Gold Particles
Doremus, R. H. (1964) · The Journal of Chemical Physics · doi:10.1063/1.1725519 · Cited by 439
CLASSIFICATION OF THE MODES OF EHD SPRAYING
Jaworek, A., & Krupa, A. (1999) · Journal of Aerosol Science · doi:10.1016/s0021-8502(98)00058-5 · Cited by 416
Additive manufacturing of biologically-inspired materials
Studart, A. R. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00836k · Cited by 415
Light as a construction tool of metal nanoparticles: Synthesis and mechanism
Sakamoto, M., Fujistuka, M., & Majima, T. (2009) · Journal of Photochemistry and Photobiology C: Photochemistry Reviews · doi:10.1016/j.jphotochemrev.2008.11.002 · Cited by 411
He, Y. Q., Liu, S. P., Kong, L., & Liu, Z. F. (2004) · Spectrochimica Acta Part A Molecular and Biomolecular Spectroscopy · doi:10.1016/j.saa.2004.10.035 · Cited by 337
Laser-assisted direct ink writing of planar and 3D metal architectures
Skylar-Scott, M. A., Gunasekaran, S., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1525131113 · Cited by 318
An, B. W., Kim, K., Lee, H., Kim, S., Shim, Y., Lee, D., Song, J. Y., & Park, J. (2015) · Advanced Materials · doi:10.1002/adma.201502092 · Cited by 306
Toward 3D Printing of Pure Metals by Laser‐Induced Forward Transfer
Visser, C. W., Pohl, R., Sun, C., Römer, G., Huis in ‘t Veld, B., & Lohse, D. (2015) · Advanced Materials · doi:10.1002/adma.201501058 · Cited by 282
Nanoscale 3D Chiral Plasmonic Helices with Circular Dichroism at Visible Frequencies
Esposito, M., Tasco, V., Cuscunà, M., Todisco, F., Benedetti, A., Tarantini, I., Giorgi, M. D., Sanvitto, D., & Passaseo, A. (2015) · ACS Photonics · doi:10.1021/ph500318p · Cited by 274
Tanaka, T., Ishikawa, A., & Kawata, S. (2006) · Applied Physics Letters · doi:10.1063/1.2177636 · Cited by 263
3D Metallic Nanostructure Fabrication by Surfactant‐Assisted Multiphoton‐Induced Reduction
Cao, Y., Takeyasu, N., Tanaka, T., Duan, X., & Kawata, S. (2009) · Small · doi:10.1002/smll.200801179 · Cited by 257
Electrochemical Nanoprobes for Single-Cell Analysis
Actis, P., Tokar, S., Clausmeyer, J., Babakinejad, B., Mikhaleva, S., Cornut, R., Takahashi, Y., López Córdoba, A., Novak, P., Shevchuck, A. I., et al. (2014) · ACS Nano · doi:10.1021/nn405612q · Cited by 252
Laser Rapid Prototyping of Photonic Band-Gap Microstructures
Wanke, M. C., Lehmann, O., Müller, K., Wen, Q., & Stuke, M. (1997) · Science · doi:10.1126/science.275.5304.1284 · Cited by 251
Metallic Architectures from 3D‐Printed Powder‐Based Liquid Inks
Jakus, A. E., Taylor, S. L., Geisendorfer, N. R., Dunand, D. C., & Shah, R. N. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201503921 · Cited by 209
Laser and Electron-Beam Induced Growth of Nanoparticles for 2D and 3D Metal Patterning
Stellacci, F., Bauer, C. A., Meyer-Friedrichsen, T., Wenseleers, W., Alain, V., Kuebler, S. M., Pond, S. J. K., Zhang, Y., Marder, S. R., & Perry, J. W. (2002) · Advanced Materials · doi:10.1002/1521-4095(20020205)14:3<194::aid-adma194>3.0.co;2-w · Cited by 204
Invisible metal-grid transparent electrode prepared by electrohydrodynamic (EHD) jet printing
Jang, Y., Kim, J., & Byun, D. (2013) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/46/15/155103 · Cited by 197
Handbook of Silicon Based MEMS Materials and Technologies
(2010) · Elsevier eBooks · doi:10.1016/c2009-0-19030-x · Cited by 194
Ultra-strong architected Cu meso-lattices
Wendy Gu, X., & Greer, J. R. (2015) · Extreme Mechanics Letters · doi:10.1016/j.eml.2015.01.006 · Cited by 182
On three-dimensional dilational elastic metamaterials
Bückmann, T., Schittny, R., Thiel, M., Kadic, M., Milton, G. W., & Wegener, M. (2014) · New Journal of Physics · doi:10.1088/1367-2630/16/3/033032 · Cited by 182
Fabrication of Conductive 3D Gold‐Containing Microstructures via Direct Laser Writing
Blasco, E., Müller, J., Müller, P., Trouillet, V., Schön, M., Scherer, T., Barner‐Kowollik, C., & Wegener, M. (2016) · Advanced Materials · doi:10.1002/adma.201506126 · Cited by 182
Micro/nanoscale electrohydrodynamic printing: from 2D to 3D
Zhang, B., He, J., Li, X., Xu, F., & Li, D. (2016) · Nanoscale · doi:10.1039/c6nr04106j · Cited by 172
Three‐Dimensional μ‐Printing: An Enabling Technology
Hohmann, J. K., Renner, M., Waller, E. H., & von Freymann, G. (2015) · Advanced Optical Materials · doi:10.1002/adom.201500328 · Cited by 165
Hybrid Helical Magnetic Microrobots Obtained by 3D Template‐Assisted Electrodeposition
Zeeshan, M. A., Grisch, R., Pellicer, E., Sivaraman, K. M., Peyer, K. E., Sort, J., Özkale, B., Sakar, M. S., Nelson, B. J., & Pané, S. (2014) · Small · doi:10.1002/smll.201302856 · Cited by 165
Three-dimensional printing of freeform helical microstructures: a review
Farahani, R. D., Chizari, K., & Therriault, D. (2014) · Nanoscale · doi:10.1039/c4nr02041c · Cited by 160
Seol, S. K., Kim, D., Lee, S., Kim, J., Chang, W. S., & Kim, J. T. (2015) · Small · doi:10.1002/smll.201500177 · Cited by 157
Microfabrication, Microstructures and Microsystems
Qin, D., Younan Xia, A., Rogers, J. A., Jackman, R. J., Zhao, X., & Whitesides, G. M. (1998) · Topics in current chemistry · doi:10.1007/3-540-69544-3_1 · Cited by 156
Xu, B.-B., Xia, H., Niu, L., et al. (2010) · Small · doi:10.1002/smll.201000511 · Cited by 139
Wedge Waveguides and Resonators for Quantum Plasmonics
Kress, S. J. P., Antolinez, F. V., Richner, P., Jayanti, S. V., Kim, D. K., Prins, F., Riedinger, A., Fischer, M. P. C., Meyer, S., McPeak, K. M., et al. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b03051 · Cited by 133
Additive nanomanufacturing – A review
Engstrøm, D. S., Porter, B. F., Pacios, M., & Bhaskaran, H. (2014) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2014.159 · Cited by 131
The Power of the Pen: Development of Massively Parallel Dip-Pen Nanolithography
Mirkin, C. A. (2007) · ACS Nano · doi:10.1021/nn700228m · Cited by 129
Tong, L., Righini, M., González, M. U., Quidant, R., & Käll, M. (2008) · Lab on a Chip · doi:10.1039/b813204f · Cited by 129
Kent, A. D., Shaw, T. M., von Molnár, S., & Awschalom, D. D. (1993) · Science · doi:10.1126/science.262.5137.1249 · Cited by 128
Maruo, S., & Saeki, T. (2008) · Optics Express · doi:10.1364/oe.16.001174 · Cited by 123
Piqué, A., Auyeung, R. C. Y., Kim, H., Charipar, N. A., & Mathews, S. A. (2016) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/49/22/223001 · Cited by 123
Improvement in the reduction of silver ions in aqueous solution using two-photon sensitive dye
Ishikawa, A., Tanaka, T., & Kawata, S. (2006) · Applied Physics Letters · doi:10.1063/1.2345601 · Cited by 120
Options for additive rapid prototyping methods (3D printing) in MEMS technology
Lifton, V. A., Lifton, G., & Simon, S. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2013-0038 · Cited by 120
Directing Matter: Toward Atomic-Scale 3D Nanofabrication
Jesse, S., Borisevich, A. Y., Fowlkes, J. D., Lupini, A. R., Rack, P. D., Unocic, R. R., Sumpter, B. G., Kalinin, S. V., Belianinov, A., & Ovchinnikova, O. S. (2016) · ACS Nano · doi:10.1021/acsnano.6b02489 · Cited by 118
On three-dimensional dilational elastic metamaterials
Bückmann, T., Schittny, R., Thiel, M., et al. (2014) · Repository KITopen (Karlsruhe Institute of Technology) · doi:10.5445/ir/1000042057 · Cited by 117
Laser jetting of femto-liter metal droplets for high resolution 3D printed structures
Zenou, M., Sa'ar, A., & Kotler, Z. (2015) · Scientific Reports · doi:10.1038/srep17265 · Cited by 112
Laser fabrication of 2D and 3D metal nanoparticle structures and arrays
Kuznetsov, A. I., Kiyan, R. V., & Chichkov, B. N. (2010) · Optics Express · doi:10.1364/oe.18.021198 · Cited by 110
Laser Transfer of Metals and Metal Alloys for Digital Microfabrication of 3D Objects
Zenou, M., Sa'ar, A., & Kotler, Z. (2015) · Small · doi:10.1002/smll.201500612 · Cited by 84
Optical and Infrared Helical Metamaterials
Kaschke, J., & Wegener, M. (2016) · Nanophotonics · doi:10.1515/nanoph-2016-0005 · Cited by 84
Near-Field Light Design with Colloidal Quantum Dots for Photonics and Plasmonics
Kress, S. J. P., Richner, P., Jayanti, S. V., Galliker, P., Kim, D. K., Dimos Poulikakos, A., & Norris, D. J. (2014) · Nano Letters · doi:10.1021/nl5026997 · Cited by 81
McKelvey, K., O’Connell, M. A., & Unwin, P. R. (2013) · Chemical Communications · doi:10.1039/c3cc00104k · Cited by 80
Peinado, P., Sangiao, S., & Teresa, J. M. D. (2015) · ACS Nano · doi:10.1021/acsnano.5b01383 · Cited by 80
Lu, W., Zhang, Y., Zheng, M., Jia, Y., Liu, J., Dong, X., Zhao, Z., Li, C., Xia, Y., Ye, T., et al. (2013) · Optical Materials Express · doi:10.1364/ome.3.001660 · Cited by 75
Micro additive manufacturing using ultra short laser pulses
Veld, B. H. I. ‘., Overmeyer, L., Schmidt, M., Wegener, K., Malshe, A. P., & Bártolo, P. (2015) · CIRP Annals · doi:10.1016/j.cirp.2015.05.007 · Cited by 73
Fabrication methods of 3D periodic metallic nano/microstructures for photonics applications
Hossain, M. M., & Gu, M. (2013) · Laser & Photonics Review · doi:10.1002/lpor.201300052 · Cited by 69
One-step direct-laser metal writing of sub-100 nm 3D silver nanostructures in a gelatin matrix
Kang, S., Vora, K., & Mazur, E. (2015) · Nanotechnology · doi:10.1088/0957-4484/26/12/121001 · Cited by 63
Additive Manufacturing of Hybrid Circuits
Sarobol, P., Cook, A., Clem, P. G., Keicher, D. M., Hirschfeld, D. A., Hall, A. C., & Bell, N. S. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031632 · Cited by 62
The influence of beam defocus on volume growth rates for electron beam induced platinum deposition
Plank, H., Gspan, C., Dienstleder, M., Kothleitner, G., & Hofer, F. (2008) · Nanotechnology · doi:10.1088/0957-4484/19/48/485302 · Cited by 61
Takai, T., Nakao, H., & Iwata, F. (2014) · Optics Express · doi:10.1364/oe.22.028109 · Cited by 57
Local surface modification via confined electrochemical deposition with FluidFM
Hirt, L., Grüter, R. R., Berthelot, T., Cornut, R., Vörös, J., & Zambelli, T. (2015) · RSC Advances · doi:10.1039/c5ra07239e · Cited by 55
Self-citationLassner, E., & Schubert, W. (1999) · Springer eBooks · doi:10.1007/978-1-4615-4907-9_1 · Cited by 54
Post-growth purification of Co nanostructures prepared by focused electron beam induced deposition
Begun, E., Dobrovolskiy, O. V., Kompaniiets, M., Sachser, R., Gspan, C., Plank, H., & Huth, M. (2015) · Nanotechnology · doi:10.1088/0957-4484/26/7/075301 · Cited by 52
Photoreduction of Metal Ions by Visible Light1
Oster, G. K., & Oster, G. (1959) · Journal of the American Chemical Society · doi:10.1021/ja01530a007 · Cited by 49
Synthesis, structure and mechanical properties of ice-templated tungsten foams
Röthlisberger, A., Häberli, S., Spolenak, R., & Dunand, D. C. (2016) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2016.62 · Cited by 44
Self-citationTailoring chiro-optical effects by helical nanowire arrangement
Esposito, M., Tasco, V., Todisco, F., Benedetti, A., Tarantini, I., Cuscunà, M., Dominici, L., Giorgi, M. D., & Passaseo, A. (2015) · Nanoscale · doi:10.1039/c5nr04674b · Cited by 43
A Review on Electromechanical Devices Fabricated by Additive Manufacturing
O’Donnell, J., Kim, M., & Yoon, H. (2016) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4033758 · Cited by 43
Drop-on-Demand Direct Printing of Colloidal Copper Nanoparticles by Electrohydrodynamic Atomization
Kim, D. S., Khan, A., Rahman, K., Khan, S., Kim, H. C., & Choi, K. H. (2011) · Materials and Manufacturing Processes · doi:10.1080/10426914.2011.551956 · Cited by 41
Electrochemical printing: software reconfigurable electrochemical microfabrication
Whitaker, J. D., Nelson, J. B., & Schwartz, D. T. (2005) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/15/8/017 · Cited by 40
Panagiotakopoulou, M., Bergert, M., Taubenberger, A. V., Guck, J. R., Dimos Poulikakos, A., & Ferrari, A. (2016) · ACS Nano · doi:10.1021/acsnano.5b07406 · Cited by 40
Why use Ionic Liquids for Electrodeposition?
Abbott, A. P., Dalrymple, I. M., Endres, F., & MacFarlane, D. R. (2008) · Wiley eBooks · doi:10.1002/9783527622917.ch1 · Cited by 29
A Novel 3 D Integrated Platform for the High‐ R esolution Study of Cell Migration Plasticity
Schneider, J., Bachmann, T., Franco, D., Richner, P., Galliker, P., Tiwari, M. K., Ferrari, A., & Dimos Poulikakos, A. (2013) · Macromolecular Bioscience · doi:10.1002/mabi.201200416 · Cited by 27
Winter, S., Zenou, M., & Kotler, Z. (2016) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/49/16/165310 · Cited by 27
Focşan, M., Craciun, A.-M., Aştilean, S., & Baldeck, P. L. (2016) · Optical Materials Express · doi:10.1364/ome.6.001587 · Cited by 26
Fan, G., Han, Y., Luo, S., Li, Y., Qu, S., Wang, Q., Gao, R., Chen, M., & Han, M. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c5cp04382d · Cited by 15
Cited by
Additive manufacturing of 3D nano-architected metals
Vyatskikh, A., Delalande, S., Kudo, A., Zhang, X., Portela, C. M., & Greer, J. R. (2018) · Nature Communications · doi:10.1038/s41467-018-03071-9 · Cited by 593
Huang, Q., & Zhu, Y. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800546 · Cited by 482
A review of additive manufacturing of metamaterials and developing trends
Fan, J., Zhang, L., Wei, S., Zhang, Z., Choi, S.-K., Song, B., & Shi, Y. (2021) · Materials Today · doi:10.1016/j.mattod.2021.04.019 · Cited by 440
Research status of laser additive manufacturing for metal: a review
Gong, G., Ye, J., Chi, Y., Zhao, Z., Wang, Z., Xia, G., Du, X., Tian, H., Yu, H., & Chen, C. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.08.050 · Cited by 318
3D printed porous ceramic scaffolds for bone tissue engineering: a review
Wen, Y., Xun, S., Haoye, M., Baichuan, S., Peng, C., Xuejian, L., Kaihong, Z., Xuan, Y., Jiang, P., & Shibi, L. (2017) · Biomaterials Science · doi:10.1039/c7bm00315c · Cited by 302
Metadata
- Authors
- Hirt, L., Reiser, A., Spolenak, R., & Zambelli, T.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2017-01-04
- Volume
- 29
- Issue
- 17
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2568662989
- Cited by
- 400
- References
- 103
- FWCI
- 32.28
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.