The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
A New 3D Printing Strategy by Harnessing Deformation, Instability, and Fracture of Viscoelastic Inks
Abstract
Direct ink writing (DIW) has demonstrated great potential as a multimaterial multifunctional fabrication method in areas as diverse as electronics, structural materials, tissue engineering, and soft robotics. During DIW, viscoelastic inks are extruded out of a 3D printer's nozzle as printed fibers, which are deposited into patterns when the nozzle moves. Hence, the resolution of printed fibers is commonly limited by the nozzle's diameter, and the printed pattern is limited by the motion paths. These limits have severely hampered innovations and applications of DIW 3D printing. Here, a new strategy to exceed the limits of DIW 3D printing by harnessing deformation, instability, and fracture of viscoelastic inks is reported. It is shown that a single nozzle can print fibers with resolution much finer than the nozzle diameter by stretching the extruded ink, and print various thickened or curved patterns with straight nozzle motions by accumulating the ink. A quantitative phase diagram is constructed to rationally select parameters for the new strategy. Further, applications including structures with tunable stiffening, 3D structures with gradient and programmable swelling properties, all printed with a single nozzle are demonstrated. The current work demonstrates that the mechanics of inks plays a critical role in developing 3D printing technology.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Design, fabrication and control of soft robots
Rus, D., & Tolley, M. T. (2015) · Nature · doi:10.1038/nature14543 · Cited by 5,825
Materials and Mechanics for Stretchable Electronics
Rogers, J. A., Someya, T., & Huang, Y. (2010) · Science · doi:10.1126/science.1182383 · Cited by 5,042
Bioinspired structural materials
Wegst, U. G. K., Bai, H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2015) · Nature Materials · doi:10.1038/nmat4089 · Cited by 4,721
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
An integrated design and fabrication strategy for entirely soft, autonomous robots
Wehner, M., Truby, R. L., Fitzgerald, D. J., Mosadegh, B., Whitesides, G. M., Lewis, J. A., & Wood, R. J. (2016) · Nature · doi:10.1038/nature19100 · Cited by 2,127
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Printing soft matter in three dimensions
Truby, R. L., & Lewis, J. A. (2016) · Nature · doi:10.1038/nature21003 · Cited by 1,622
Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Muth, J. T., Vogt, D. M., Truby, R. L., Mengüç, Y., Kolesky, D. B., Wood, R. J., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201400334 · Cited by 1,611
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes
Ahn, B. Y., Duoss, E. B., Motala, M. J., Guo, X., Park, S.-I., Xiong, Y., Yoon, J., Nuzzo, R. G., Rogers, J. A., & Lewis, J. A. (2009) · Science · doi:10.1126/science.1168375 · Cited by 1,191
3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures
Hong, S., Sycks, D., Chan, H. F., Lin, S., Lopez, G. P., Guilak, F., Leong, K. W., & Zhao, X. (2015) · Advanced Materials · doi:10.1002/adma.201501099 · Cited by 873
Self-citationInstrumented cardiac microphysiological devices via multimaterial three-dimensional printing
Lind, J. U., Busbee, T. A., Valentine, A. D., Pasqualini, F. S., Yuan, H., Yadid, M., Park, S.-J., Kotikian, A., Nesmith, A. P., Campbell, P. H., et al. (2017) · Nature Materials · doi:10.1038/nmat4782 · Cited by 863
Soft network composite materials with deterministic and bio-inspired designs
Jang, K.-I., Chung, H. U., Xu, S., Lee, C. H., Luan, H., Jeong, J., Cheng, H., Kim, G.-T., Han, S. Y., Lee, J. W., et al. (2015) · Nature Communications · doi:10.1038/ncomms7566 · Cited by 533
3D Printing of Transparent and Conductive Heterogeneous Hydrogel–Elastomer Systems
Tian, K., Bae, J., Bakarich, S. E., Yang, C., Gately, R. D., Spinks, G. M., in het Panhuis, M., Suo, Z., & Vlassak, J. J. (2017) · Advanced Materials · doi:10.1002/adma.201604827 · Cited by 419
Stable propagation of mechanical signals in soft media using stored elastic energy
Raney, J. R., Nadkarni, N., Daraio, C., Kochmann, D. M., Lewis, J. A., & Bertoldi, K. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1604838113 · Cited by 397
Jakus, A. E., Rutz, A. L., Jordan, S. W., Kannan, A., Mitchell, S. M., Yun, C., Koube, K. D., Yoo, S. C., Whiteley, H. E., Richter, C.-P., et al. (2016) · Science Translational Medicine · doi:10.1126/scitranslmed.aaf7704 · Cited by 396
Three‐Dimensional Printing of Elastomeric, Cellular Architectures with Negative Stiffness
Duoss, E. B., Weisgraber, T. H., Hearon, K., Zhu, C., Small, W., Metz, T. R., Vericella, J. J., Barth, H. D., Kuntz, J. D., Maxwell, R. S., et al. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400451 · Cited by 316
Active mixing of complex fluids at the microscale
Ober, T. J., Foresti, D., & Lewis, J. A. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1509224112 · Cited by 306
Additive Manufacturing of Optically Transparent Glass
Klein, J., Stern, M., Franchin, G., Kayser, M., Inamura, C., Dave, S., Weaver, J. C., Houk, P., Colombo, P., Yang, M., et al. (2015) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2015.0021 · Cited by 289
Strain stiffening in collagen I networks
Motte, S., & Kaufman, L. J. (2013) · Biopolymers · doi:10.1002/bip.22133 · Cited by 181
Additive manufacturing of hydrogel-based materials for next-generation implantable medical devices
Chin, S. Y., Poh, Y. C., Kohler, A.-C., Compton, J. T., Hsu, L. L., Lau, K. M., Kim, S., Lee, B. W., Lee, F. Y., & Sia, S. K. (2017) · Science Robotics · doi:10.1126/scirobotics.aah6451 · Cited by 172
Modeling the Rheology of Polymer Melts and Solutions
Larson, R. G., & Desai, P. S. (2014) · Annual Review of Fluid Mechanics · doi:10.1146/annurev-fluid-010814-014612 · Cited by 163
Some conditions for rupture of polymer liquids in extension
Malkin, A. Y., & Petrie, C. J. S. (1997) · Journal of Rheology · doi:10.1122/1.550881 · Cited by 163
Microscopic Mechanisms of the Brittleness of Viscoelastic Fluids
Tabuteau, H., Mora, S., Porte, G., Abkarian, M., & Ligoure, C. (2009) · Physical Review Letters · doi:10.1103/physrevlett.102.155501 · Cited by 83
Meandering instability of a viscous thread
Morris, S. W., Dawes, J., Ribe, N. M., & Lister, J. R. (2008) · Physical Review E · doi:10.1103/physreve.77.066218 · Cited by 76
Multiple Cracks Propagate Simultaneously in Polymer Liquids in Tension
Huang, Q., Alvarez, N. J., Shabbir, A., & Hassager, O. (2016) · Physical Review Letters · doi:10.1103/physrevlett.117.087801 · Cited by 55
Instability‐Assisted Direct Writing of Microstructured Fibers Featuring Sacrificial Bonds
Passieux, R., Guthrie, L., Rad, S. H., Lévesque, M., Therriault, D., & Gosselin, F. P. (2015) · Advanced Materials · doi:10.1002/adma.201500603 · Cited by 52
Cited by
Yuk, H., Lu, B., & Zhao, X. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00595h · Cited by 2,108
Self-citationDry double-sided tape for adhesion of wet tissues and devices
Yuk, H., Varela, C. E., Nabzdyk, C. S., Mao, X., Padera, R. F., Roche, E. T., & Zhao, X. (2019) · Nature · doi:10.1038/s41586-019-1710-5 · Cited by 1,471
Self-citationPrintability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
3D printing of conducting polymers
Yuk, H., Lu, B., Lin, S., Qu, K., Xu, J., Luo, J., & Zhao, X. (2020) · Nature Communications · doi:10.1038/s41467-020-15316-7 · Cited by 1,001
Self-citation
Metadata
- Authors
- Yuk, H., & Zhao, X.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2017-12-14
- Volume
- 30
- Issue
- 6
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2771135651
- Cited by
- 381
- References
- 29
- FWCI
- 15.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.