The DOI matches its Crossref record; 64 of the 64 references it cites were found in a registry or an index.
FA0.88Cs0.12PbI3−x(PF6)x Interlayer Formed by Ion Exchange Reaction between Perovskite and Hole Transporting Layer for Improving Photovoltaic Performance and Stability
Abstract
Interface engineering to form an interlayer via ion exchange reaction is reported. A FA 0.88 Cs 0.12 PbI 3 formamidinium (FA) perovskite layer is first prepared, then FAPF 6 solution with different concentrations is spin‐coated on top of the perovskite film, which leads to a partial substitution of iodide by PF 6− ion. The second phase with nominal composition of FA 0.88 Cs 0.12 PbI 3−x(PF 6)x is grown at the grain boundary, which has island morphology and its size depends on the FAPF 6 solution concentration. The lattice is expanded and bandgap is reduced due to inclusion of larger PF 6− ions. The power conversion efficiency (PCE) is significantly enhanced from 17.8% to 19.3% as a consequence of improved fill factor and open‐circuit voltage (Voc). In addition, current–voltage hysteresis is reduced. Post‐treatment with FAPF 6 reduces defect density and enhances carrier lifetime, which is responsible for the improved photovoltaic performance and reduced hysteresis. The unencapsulated device with post‐treated perovskite film demonstrates better stability than the pristine perovskite, where the initial PCE retains over 80% after 528 h exposure under relative humidity of around 50–70% in the dark and 92% after 360 h under one sun illumination.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Self-citationHigh-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells
Yang, W. S., Park, B.-W., Jung, E. H., Jeon, N. J., Kim, Y. C., Lee, D. U., Shin, S. S., Seo, J., Kim, E. K., Noh, J. H., et al. (2017) · Science · doi:10.1126/science.aan2301 · Cited by 5,445
Saliba, M., Matsui, T., Seo, J.-Y., Domanski, K., Correa-Baena, J.-P., Nazeeruddin, M. K., Zakeeruddin, S. M., Tress, W., Abate, A., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03874j · Cited by 5,440
Noh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
Eperon, G. E., Stranks, S. D., Menelaou, C., Johnston, M. B., Herz, L. M., & Snaith, H. J. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43822h · Cited by 4,140
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Saliba, M., Matsui, T., Domanski, K., Seo, J.-Y., Ummadisingu, A., Zakeeruddin, S. M., Correa-Baena, J.-P., Tress, W. R., Abate, A., Hagfeldt, A., et al. (2016) · Science · doi:10.1126/science.aah5557 · Cited by 3,706
Ahn, N., Son, D.-Y., Jang, I.-H., Kang, S. M., Choi, M., & Park, N.-G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04930 · Cited by 2,312
Self-citationZheng, X., Chen, B., Dai, J., Fang, Y., Bai, Y., Lin, Y., Wei, H., Zeng, X. C., & Huang, J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.102 · Cited by 2,154
Bi, D., Yi, C., Luo, J., Décoppet, J.-D., Zhang, F., Zakeeruddin, S. M., Li, X., Hagfeldt, A., & Grätzel, M. (2016) · Nature Energy · doi:10.1038/nenergy.2016.142 · Cited by 2,037
A vacuum flash–assisted solution process for high-efficiency large-area perovskite solar cells
Li, X., Bi, D., Yi, C., Décoppet, J.-D., Luo, J., Zakeeruddin, S. M., Hagfeldt, A., & Grätzel, M. (2016) · Science · doi:10.1126/science.aaf8060 · Cited by 1,915
Yuan, Y., & Huang, J. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00420 · Cited by 1,865
Noel, N. K., Abate, A., Stranks, S. D., Parrott, E. S., Burlakov, V. M., Goriely, A., & Snaith, H. J. (2014) · ACS Nano · doi:10.1021/nn5036476 · Cited by 1,709
Formamidinium and Cesium Hybridization for Photo‐ and Moisture‐Stable Perovskite Solar Cell
Lee, J., Kim, D., Kim, H., Seo, S., Cho, S. M., & Park, N. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501310 · Cited by 1,663
Self-citationMixed‐Organic‐Cation Perovskite Photovoltaics for Enhanced Solar‐Light Harvesting
Pellet, N., Gao, P., Gregori, G., Yang, T., Nazeeruddin, M. K., Maier, J., & Grätzel, M. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201309361 · Cited by 1,306
Yi, C., Luo, J., Meloni, S., Boziki, A., Ashari-Astani, N., Grätzel, C., Zakeeruddin, S. M., Röthlisberger, U., & Grätzel, M. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03255e · Cited by 1,281
Grain boundary dominated ion migration in polycrystalline organic–inorganic halide perovskite films
Shao, Y., Fang, Y., Li, T., Wang, Q., Dong, Q., Deng, Y., Yuan, Y., Wei, H., Wang, M., Gruverman, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00413j · Cited by 1,231
Noncoordinating Anions—Fact or Fiction? A Survey of Likely Candidates
Krossing, I., & Raabe, I. (2004) · Angewandte Chemie International Edition · doi:10.1002/anie.200300620 · Cited by 1,139
Kim, H.-S., & Park, N.-G. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501392m · Cited by 1,065
Self-citationSurface optimization to eliminate hysteresis for record efficiency planar perovskite solar cells
Yang, D., Zhou, X., Yang, R., Yang, Z., Yu, W., Wang, X., Li, C., Liu, S. (., & Chang, R. P. H. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02139e · Cited by 1,057
Self-formed grain boundary healing layer for highly efficient CH3NH3PbI3 perovskite solar cells
Son, D.-Y., Lee, J.-W., Choi, Y. J., Jang, I.-H., Lee, S., Yoo, P. J., Shin, H., Ahn, N., Choi, M., Kim, D., et al. (2016) · Nature Energy · doi:10.1038/nenergy.2016.81 · Cited by 1,053
Self-citationHigh‐Efficiency Perovskite Solar Cells Based on the Black Polymorph of HC(NH2)2PbI3
Lee, J., Seol, D., Cho, A., & Park, N. (2014) · Advanced Materials · doi:10.1002/adma.201401137 · Cited by 951
Self-citationLin, H., Huang, C. P., Li, W., Ni, C., Shah, S. I., & Tseng, Y.-H. (2006) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2006.07.018 · Cited by 913
Universal Approach toward Hysteresis-Free Perovskite Solar Cell via Defect Engineering
Son, D.-Y., Kim, S.-G., Seo, J.-Y., Lee, S.-H., Shin, H., Lee, D., & Park, N.-G. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b10430 · Cited by 891
Self-citationWang, Q., Chen, B., Liu, Y., Deng, Y., Bai, Y., Dong, Q., & Huang, J. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02941h · Cited by 886
Lee, S. J., Shin, S. S., Kim, Y. C., Kim, D., Ahn, T. K., Noh, J. H., Seo, J., & Seok, S. I. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b00142 · Cited by 817
Supramolecular Halogen Bond Passivation of Organic–Inorganic Halide Perovskite Solar Cells
Abate, A., Saliba, M., Hollman, D. J., Stranks, S. D., Wojciechowski, K., Avolio, R., Grancini, G., Petrozza, A., & Snaith, H. J. (2014) · Nano Letters · doi:10.1021/nl500627x · Cited by 774
Polymer-modified halide perovskite films for efficient and stable planar heterojunction solar cells
Zuo, L., Guo, H., deQuilettes, D. W., Jariwala, S., De Marco, N., Dong, S., DeBlock, R., Ginger, D. S., Dunn, B., Wang, M., et al. (2017) · Science Advances · doi:10.1126/sciadv.1700106 · Cited by 749
Zuo, L., Gu, Z., Ye, T., Fu, W., Wu, G., Li, H., & Chen, H. (2015) · Journal of the American Chemical Society · doi:10.1021/ja512518r · Cited by 676
Ran, C., Xu, J., Gao, W., Huang, C., & Dou, S. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00868f · Cited by 634
Li, W., Zhang, W., Van Reenen, S., Sutton, R. J., Fan, J., Haghighirad, A. A., Johnston, M. B., Wang, L., & Snaith, H. J. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03522h · Cited by 615
Trapped charge-driven degradation of perovskite solar cells
Ahn, N., Kwak, K., Jang, M. S., Yoon, H., Lee, B. Y., Lee, J.-K., Pikhitsa, P. V., Byun, J., & Choi, M. (2016) · Nature Communications · doi:10.1038/ncomms13422 · Cited by 606
Efficient and stable perovskite solar cells prepared in ambient air irrespective of the humidity
Tai, Q., You, P., Sang, H., Liu, Z., Hu, C., Chan, H. L. W., & Yan, F. (2016) · Nature Communications · doi:10.1038/ncomms11105 · Cited by 590
Yang, M., Zhang, T., Schulz, P., Li, Z., Li, G., Kim, D. H., Guo, N., Berry, J. J., Zhu, K., & Zhao, Y. (2016) · Nature Communications · doi:10.1038/ncomms12305 · Cited by 540
Cho, K. T., Paek, S., Grancini, G., Roldán‐Carmona, C., Gao, P., Lee, Y., & Nazeeruddin, M. K. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03182j · Cited by 532
Bu, T., Liu, X., Zhou, Y., Yi, J., Huang, X., Luo, L., Xiao, J., Ku, Z., Peng, Y., Huang, F., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee02634j · Cited by 516
Almora, O., Zarazua, I., Mas-Marza, E., Mora-Sero, I., Bisquert, J., & Garcia-Belmonte, G. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00480 · Cited by 503
Xie, F., Chen, C., Wu, Y., Li, X., Cai, M., Liu, X., Yang, X., & Han, L. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01675a · Cited by 499
Control of I–V Hysteresis in CH3NH3PbI3 Perovskite Solar Cell
Kim, H.-S., Jang, I.-H., Ahn, N., Choi, M., Guerrero, A., Bisquert, J., & Park, N.-G. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b02273 · Cited by 478
Self-citationFully Printable Mesoscopic Perovskite Solar Cells with Organic Silane Self-Assembled Monolayer
Liu, L., Mei, A., Liu, T., Jiang, P., Sheng, Y., Zhang, L., & Han, H. (2015) · Journal of the American Chemical Society · doi:10.1021/ja5125594 · Cited by 460
Li, J., Dong, Q., Li, N., & Wang, L. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602922 · Cited by 422
Chemical Reduction of Intrinsic Defects in Thicker Heterojunction Planar Perovskite Solar Cells
Liu, Z., Hu, J., Jiao, H., Li, L., Zheng, G., Chen, Y., Huang, Y., Zhang, Q., Shen, C., Chen, Q., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606774 · Cited by 383
Correa-Baena, J.-P., Tress, W., Domanski, K., Anaraki, E. H., Turren-Cruz, S.-H., Roose, B., Boix, P. P., Grätzel, M., Saliba, M., Abate, A., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00421d · Cited by 338
The role of grain boundaries in perovskite solar cells
Lee, J.-W., Bae, S.-H., De Marco, N., Hsieh, Y.-T., Dai, Z., & Yang, Y. (2018) · Materials Today Energy · doi:10.1016/j.mtener.2017.07.014 · Cited by 292
High-efficiency humidity-stable planar perovskite solar cells based on atomic layer architecture
Koushik, D., Verhees, W. J. H., Kuang, Y., Veenstra, S., Zhang, D., Verheijen, M. A., Creatore, M., & Schropp, R. E. I. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02687g · Cited by 285
Cha, M., Da, P., Wang, J., Wang, W., Chen, Z., Xiu, F., Zheng, G., & Wang, Z.-S. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b04519 · Cited by 282
Effect of Selective Contacts on the Thermal Stability of Perovskite Solar Cells
Zhao, X., Kim, H.-S., Seo, J.-Y., & Park, N.-G. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b15673 · Cited by 265
Self-citationBisquert, J., Bertoluzzi, L., Mora-Sero, I., & Garcia-Belmonte, G. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp5062144 · Cited by 219
Li, W., Dong, H., Guo, X., Li, N., Li, J., Niu, G., & Wang, L. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta05196c · Cited by 216
Jiang, Y., Leyden, M. R., Qiu, L., Wang, S., Ono, L. K., Wu, Z., Juarez‐Perez, E. J., & Qi, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201703835 · Cited by 209
Yang, Z., Chueh, C.-C., Liang, P.-W., Crump, M., Lin, F., Zhu, Z., & Jen, A. K.-Y. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.02.033 · Cited by 201
The Institute of Chemistry of Great Britain and Ireland. Journal and Proceedings. Part II: 1935
(1935) · Journal and Proceedings of the Institute of Chemistry of Great Britain and Ireland · doi:10.1039/jg9355900101 · Cited by 195
Chen, J., Rong, Y., Mei, A., Xiong, Y., Liu, T., Sheng, Y., Jiang, P., Hong, L., Guan, Y., Zhu, X., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502009 · Cited by 185
Self-citationEfficient and reproducible CH3NH3PbI3−x(SCN)x perovskite based planar solar cells
Chen, Y., Li, B., Huang, W., Gao, D., & Liang, Z. (2015) · Chemical Communications · doi:10.1039/c5cc03615a · Cited by 166
The Progress of Interface Design in Perovskite‐Based Solar Cells
Fan, R., Huang, Y., Wang, L., Li, L., Zheng, G., & Zhou, H. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600460 · Cited by 164
Cation exchange for thin film lead iodide perovskite interconversion
Eperon, G. E., Beck, C. E., & Snaith, H. J. (2016) · Materials Horizons · doi:10.1039/c5mh00170f · Cited by 160
Cai, F., Yang, L., Yu, Y., et al. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02317k · Cited by 137
Advancements in all-solid-state hybrid solar cells based on organometal halide perovskites
Shi, S., Li, Y., Li, X., & Wang, H. (2015) · Materials Horizons · doi:10.1039/c4mh00236a · Cited by 124
Starr, D. E., Sadoughi, G., Handick, E., Wilks, R. G., Alsmeier, J. H., Köhler, L., Gorgoi, M., Snaith, H. J., & Bär, M. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00403a · Cited by 105
Ion-Induced Rectification of Nanoparticle Quantized Capacitance Charging in Aqueous Solutions
Chen, S. W., & Pei, R. (2001) · Journal of the American Chemical Society · doi:10.1021/ja011394c · Cited by 90
Lee, H., & Lee, C. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201702197 · Cited by 85
Decreasing Charge Losses in Perovskite Solar Cells Through mp-TiO2/MAPI Interface Engineering
Marín‐Beloqui, J. M., Lanzetta, L., & Palomares, E. J. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b03902 · Cited by 84
Брус, В. В., Kyaw, A. K. K., Maryanchuk, P. D., & Zhang, J. (2015) · Progress in Photovoltaics Research and Applications · doi:10.1002/pip.2586 · Cited by 49
Cited by
Bu, T., Li, J., Li, H., Tian, C., Su, J., Tong, G., Ono, L. K., Wang, C., Lin, Z., Chai, N., et al. (2021) · Science · doi:10.1126/science.abh1035 · Cited by 731
Surface Passivation Using 2D Perovskites toward Efficient and Stable Perovskite Solar Cells
Wu, G., Liang, R., Ge, M., Sun, G., Zhang, Y., & Xing, G. (2022) · Advanced Materials · doi:10.1002/adma.202105635 · Cited by 531
Chen, J., Zhao, X., Kim, S., & Park, N. (2019) · Advanced Materials · doi:10.1002/adma.201902902 · Cited by 527
Self-citationMaterials and Methods for Interface Engineering toward Stable and Efficient Perovskite Solar Cells
Chen, J., & Park, N.-G. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01240 · Cited by 521
Self-citationKang, D., & Park, N. (2019) · Advanced Materials · doi:10.1002/adma.201805214 · Cited by 498
Self-citation
Metadata
- Authors
- Chen, J., Kim, S., & Park, N.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-08-23
- Volume
- 30
- Issue
- 40
- Pages
- e1801948-e1801948
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2888762634
- Cited by
- 254
- References
- 64
- FWCI
- 11.67
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.