The DOI matches its Crossref record; 67 of the 67 references it cites were found in a registry or an index.
Ceramic Robocasting: Recent Achievements, Potential, and Future Developments
Abstract
Additive manufacturing (AM) of ceramic materials has attracted tremendous attention in recent years, due to its potential to fabricate suitable advanced ceramic structures for various engineering applications. Robocasting, a subset of ceramic AM, is an ideal technique for constructing fine and dense ceramic structures with geometrically complex morphology. With the freedom and convenience to deposit various materials within any 3D spatial position, ceramic robocasting opens up unlimited opportunities, which are otherwise hardly attainable from other AM techniques. Here, a summary of the recent progress on the fabrication of single and multi‐ceramic structures by robocasting is provided, as well as the prospects of achieving shapeable ceramic structures. The current challenges in ceramic robocasting and an outlook on its development, especially toward the fabrication of self‐shaping ceramic structures, are also discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Colloidal Processing of Ceramics
Lewis, J. A. (2000) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2000.tb01560.x · Cited by 1,371
3D Printing of Interdigitated Li‐Ion Microbattery Architectures
Sun, K., Wei, T., Ahn, B. Y., Seo, J. Y., Dillon, S. J., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201301036 · Cited by 1,341
Additive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities
Zocca, A., Colombo, P., Gomes, C. M., & Günster, J. (2015) · Journal of the American Ceramic Society · doi:10.1111/jace.13700 · Cited by 1,115
3D-printing technologies for electrochemical applications
Ambrosi, A., & Pumera, M. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00714c · Cited by 1,040
3D Printing of Shape Memory Polymers for Flexible Electronic Devices
Zarek, M., Layani, M., Cooperstein, I., Sachyani, E., Cohn, D., & Magdassi, S. (2016) · Advanced Materials · doi:10.1002/adma.201503132 · Cited by 903
Additive Manufacturing of Ceramic‐Based Materials
Travitzky, N., Bonet, A., Dermeik, B., Fey, T., Filbert‐Demut, I., Schlier, L., Schlordt, T., & Greil, P. (2014) · Advanced Engineering Materials · doi:10.1002/adem.201400097 · Cited by 878
Multimaterial magnetically assisted 3D printing of composite materials
Kokkinis, D., Schaffner, M., & Studart, A. R. (2015) · Nature Communications · doi:10.1038/ncomms9643 · Cited by 848
Direct Ink Writing of Three‐Dimensional Ceramic Structures
Lewis, J. A., Smay, J. E., Stuecker, J., & Cesarano, J. (2006) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2006.01382.x · Cited by 823
Active materials by four-dimension printing
Ge, Q., Qi, H. J., & Dunn, M. L. (2013) · Applied Physics Letters · doi:10.1063/1.4819837 · Cited by 785
Colloidal Inks for Directed Assembly of 3-D Periodic Structures
Smay, J. E., Cesarano, J., & Lewis, J. A. (2002) · Langmuir · doi:10.1021/la0257135 · Cited by 700
Direct 4D Printing Via Active Composite Materials
Ding, Z., Yuan, C., Peng, X., Wang, T., Qi, H. J., & Dunn, M. L. (2017) · Science Advances · doi:10.1126/sciadv.1602890 · Cited by 692
Ceramic Stereolithography: Additive Manufacturing for Ceramics by Photopolymerization
Halloran, J. W. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031841 · Cited by 544
Electromagnetic activation of shape memory polymer networks containing magnetic nanoparticles
Schmidt, A. M. (2006) · Macromolecular Rapid Communications · doi:10.1002/marc.200600225 · Cited by 518
Magnetically assisted slip casting of bioinspired heterogeneous composites
Le Ferrand, H., Bouville, F., Niebel, T. P., & Studart, A. R. (2015) · Nature Materials · doi:10.1038/nmat4419 · Cited by 400
Jakus, A. E., Rutz, A. L., Jordan, S. W., Kannan, A., Mitchell, S. M., Yun, C., Koube, K. D., Yoo, S. C., Whiteley, H. E., Richter, C.-P., et al. (2016) · Science Translational Medicine · doi:10.1126/scitranslmed.aaf7704 · Cited by 396
3D printed functional nanomaterials for electrochemical energy storage
Zhu, C., Liu, T., Qian, F., Chen, W., Chandrasekaran, S., Yao, B., Song, Y., Duoss, E. B., Kuntz, J. D., Spadaccini, C. M., et al. (2017) · Nano Today · doi:10.1016/j.nantod.2017.06.007 · Cited by 394
Directed Colloidal Assembly of 3D Periodic Structures
Smay, J. E., Gratson, G. M., Shepherd, R. F., Cesarano, J., & Lewis, J. A. (2002) · Advanced Materials · doi:10.1002/1521-4095(20020916)14:18<1279::aid-adma1279>3.0.co;2-a · Cited by 388
Robocasting of structural ceramic parts with hydrogel inks
Feilden, E., Blanca, E. G.-T., Giuliani, F., Saiz, E., & Vandeperre, L. (2016) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2016.03.001 · Cited by 378
Fu, Q., Saiz, E., & Tomsia, A. P. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.06.030 · Cited by 366
Direct selective laser sintering and melting of ceramics: a review
Sing, S. L., Yeong, W. Y., Wiria, F. E., Tay, B. Y., Zhao, Z., Zhao, L., Tian, Z., & Yang, S. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2015-0178 · Cited by 359
4D printing of high performance shape memory polymer using stereolithography
Choong, Y. Y. C., Maleksaeedi, S., Eng, H., Wei, J., & Su, P.-C. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.04.049 · Cited by 328
Programming 2D/3D shape-shifting with hobbyist 3D printers
van Manen, T., Janbaz, S., & Zadpoor, A. A. (2017) · Materials Horizons · doi:10.1039/c7mh00269f · Cited by 321
Sintering and robocasting of β-tricalcium phosphate scaffolds for orthopaedic applications
Miranda, P., Saiz, E., Gryn, K., & Tomsia, A. P. (2006) · Acta Biomaterialia · doi:10.1016/j.actbio.2006.02.004 · Cited by 304
Direct‐Write Assembly of 3D Hydrogel Scaffolds for Guided Cell Growth
Barry, R. A., Shepherd, R. F., Hanson, J. N., Nuzzo, R. G., Wiltzius, P., & Lewis, J. A. (2009) · Advanced Materials · doi:10.1002/adma.200803702 · Cited by 295
Direct Inkjet Printing of Dental Prostheses Made of Zirconia
Ebert, J., Özkol, E., Zeichner, A., Uibel, K., Weiss, Ö., Koops, U., Telle, R., & Fischer, H. (2009) · Journal of Dental Research · doi:10.1177/0022034509339988 · Cited by 281
Nguyen, D. T., Meyers, C., Yee, T. D., Dudukovic, N. A., Destino, J. F., Zhu, C., Duoss, E. B., Baumann, T. F., Suratwala, T., Smay, J. E., et al. (2017) · Advanced Materials · doi:10.1002/adma.201701181 · Cited by 273
Concentrated hydroxyapatite inks for direct-write assembly of 3-D periodic scaffolds
Michna, S., Wu, W., & Lewis, J. A. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.040 · Cited by 266
3D printing of a mechanically durable superhydrophobic porous membrane for oil–water separation
Lv, J., Gong, Z., He, Z., Yang, J., Chen, Y., Tang, C., Liu, Y., Fan, M., & Lau, W.-M. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02202f · Cited by 257
Differentially photo-crosslinked polymers enable self-assembling microfluidics
Jamal, M., Zarafshar, A. M., & Gracias, D. H. (2011) · Nature Communications · doi:10.1038/ncomms1531 · Cited by 249
Gioffredi, E., Boffito, M., Calzone, S., Giannitelli, S. M., Rainer, A., Trombetta, M., Mozetic, P., & Chiono, V. (2016) · Procedia CIRP · doi:10.1016/j.procir.2015.11.001 · Cited by 248
Functional Polymers and Nanocomposites for 3D Printing of Smart Structures and Devices
Nadgorny, M., & Ameli, A. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b01786 · Cited by 244
Three‐dimensional Printing for Catalytic Applications: Current Status and Perspectives
Zhou, X., & Liu, C. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201701134 · Cited by 231
Fabrication of barium titanate by binder jetting additive manufacturing technology
Gaytan, S. M., Cadena, M. A., Karim, H., Delfin, D., Lin, Y., Espalin, D., MacDonald, E., & Wicker, R. B. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.01.108 · Cited by 221
4D Printing: History and Recent Progress
Wu, J.-J., Huang, L.-M., Zhao, Q., & Xie, T. (2018) · Chinese Journal of Polymer Science · doi:10.1007/s10118-018-2089-8 · Cited by 219
3D printing of a heterogeneous copper-based catalyst
Tubío, C. R., Azuaje, J., Escalante, L., Coelho, A., Guitián, F., Sotelo, E., & Gil, A. (2016) · Journal of Catalysis · doi:10.1016/j.jcat.2015.11.019 · Cited by 214
Metallic Architectures from 3D‐Printed Powder‐Based Liquid Inks
Jakus, A. E., Taylor, S. L., Geisendorfer, N. R., Dunand, D. C., & Shah, R. N. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201503921 · Cited by 209
3D Printing Bioinspired Ceramic Composites
Feilden, E., Ferraro, C., Zhang, Q., García-Tuñón, E., D’Elia, E., Giuliani, F., Vandeperre, L., & Saiz, E. (2017) · Scientific Reports · doi:10.1038/s41598-017-14236-9 · Cited by 208
Lithography‐Based Additive Manufacturing of Cellular Ceramic Structures
Felzmann, R., Gruber, S., Mitteramskogler, G., Tesavibul, P., Boccaccini, A. R., Liska, R., & Stampfl, J. (2012) · Advanced Engineering Materials · doi:10.1002/adem.201200010 · Cited by 203
Influence of Resin Composition on the Defect Formation in Alumina Manufactured by Stereolithography
Johansson, E., Lidström, O., Johansson, J., Lyckfeldt, O., & Adolfsson, E. (2017) · Materials · doi:10.3390/ma10020138 · Cited by 197
Rocha, V. G., García-Tuñón, E., Botas, C., Markoulidis, F., Feilden, E., D’Elia, E., Ni, N., Shaffer, M., & Saiz, E. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b10285 · Cited by 191
Costakis, W. J., Rueschhoff, L. M., Diaz-Cano, A. I., Youngblood, J. P., & Trice, R. W. (2016) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2016.06.002 · Cited by 187
Review of 4D printing materials and their properties
Shin, D.-G., Kim, T.-H., & Kim, D.-E. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0040-z · Cited by 183
Ahn, B. Y., Shoji, D., Hansen, C. J., Hong, E., Dunand, D. C., & Lewis, J. A. (2010) · Advanced Materials · doi:10.1002/adma.200904232 · Cited by 176
Colloidal processing: enabling complex shaped ceramics with unique multiscale structures
Franks, G. V., Tallon, C., Studart, A. R., Sesso, M. L., & Leo, S. (2017) · Journal of the American Ceramic Society · doi:10.1111/jace.14705 · Cited by 167
Scheithauer, U., Schwarzer, E., Moritz, T., & Michaelis, A. (2018) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-017-2843-z · Cited by 158
3D gel-printing—An additive manufacturing method for producing complex shape parts
Ren, X., Shao, H., Lin, T., & Zheng, H. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.03.152 · Cited by 149
Intelligent materials: a review of applications in 4D printing
Li, X., Shang, J., & Wang, Z. (2017) · Assembly Automation · doi:10.1108/aa-11-2015-093 · Cited by 148
Reversible shape-shifting in polymeric materials
Zhou, J., & Sheiko, S. S. (2016) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.24014 · Cited by 144
Solid Freeform Fabrication Symposium Proceedings
Marcus, H. L., Beeman, J. J., Barlow, J. W., Bourell, D. L., & Crawford, R. (1993) · NASA STI/Recon Technical Report N · Cited by 140
Extrusion-based 3D Printing of Ceramic Components
Faes, M. G. R., Valkenaers, H., Vogeler, F., Vleugels, J., & Ferraris, E. (2015) · Procedia CIRP · doi:10.1016/j.procir.2015.04.028 · Cited by 128
3D gel-printing of zirconia ceramic parts
Shao, H., Zhao, D., Lin, T., He, J., & Wu, J. W. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.07.124 · Cited by 128
Díaz-Marta, A. S., Tubio, C. R., Carbajales, C., Fernández, C., Escalante, L., Sotelo, E., Guitián, F., Barrio, V. L., Gil, Á., & Coelho, A. (2017) · ACS Catalysis · doi:10.1021/acscatal.7b02592 · Cited by 117
Morissette, S. L., Lewis, J. A., Clem, P. G., et al. (2001) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2001.tb01036.x · Cited by 114
Influence of Residual Monomer on Cracking in Ceramics Fabricated by Stereolithography
Bae, C., & Halloran, J. W. (2010) · International Journal of Applied Ceramic Technology · doi:10.1111/j.1744-7402.2010.02578.x · Cited by 112
Bio-inspired self-shaping ceramics
Bargardi, F. L., Ferrand, H. L., Libanori, R., & Studart, A. R. (2016) · Nature Communications · doi:10.1038/ncomms13912 · Cited by 107
Iron and Nickel Cellular Structures by Sintering of 3D‐Printed Oxide or Metallic Particle Inks
Taylor, S. L., Jakus, A. E., Shah, R. N., & Dunand, D. C. (2016) · Advanced Engineering Materials · doi:10.1002/adem.201600365 · Cited by 102
Control of the viscous behavior of highly concentrated mullite suspensions for robocasting
Stuecker, J. N., Cesarano, J., & Hirschfeld, D. A. (2003) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(03)00586-7 · Cited by 89
Direct ink writing of zirconia three-dimensional structures
Liao, J., Chen, H., Luo, H., Wang, X., Zhou, K., & Zhang, D. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc01545c · Cited by 73
Self-citationDirected Colloidal Assembly of Linear and Annular Lead Zirconate Titanate Arrays
Smay, J. E., Cesarano, J., Tuttle, B. A., et al. (2004) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2004.00293.x · Cited by 61
Additive manufacturing of periodic ceramic substrates for automotive catalyst supports
Santoliquido, O., Bianchi, G., Eggenschwiler, P. D., & Ortona, A. (2017) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.12745 · Cited by 57
Solvent-cast based metal 3D printing and secondary metallic infiltration
Xu, C., Bouchemit, A., L’Éspérance, G., Lebel, L. L., & Therriault, D. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc02884a · Cited by 51
Wei, X., Sugumaran, P. J., Peng, E., Liu, X. L., & Ding, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b10549 · Cited by 36
Self-citation3D printing of Al 2 O 3 photonic crystals for terahertz frequencies
Tubio, C. R., López, J. A. N., Martin, J. M., Guitián, F., Salgueiro, J. R., & Gil, Á. (2015) · RSC Advances · doi:10.1039/c5ra22737b · Cited by 26
Wei, X., Peng, E., Xie, Y., et al. (2017) · Journal of Materials Chemistry C · doi:10.1039/c6tc05393a · Cited by 22
Self-citation
Cited by
Rheological characterisation of ceramic inks for 3D direct ink writing: A review
del-Mazo-Barbara, L., & Ginebra, M.-P. (2021) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2021.08.031 · Cited by 444
Zhou, S., Liu, G., Wang, C., Zhang, Y., Yan, C., & Shi, Y. (2024) · Materials & Design · doi:10.1016/j.matdes.2024.112632 · Cited by 150
Rahman, M. H., Hayes, A., Muralidharan, K., Loy, D. A., & Shafae, M. (2023) · doi:10.2139/ssrn.4354354 · Cited by 1
Metadata
- Authors
- Peng, E., Zhang, D., & Ding, J.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-10-10
- Volume
- 30
- Issue
- 47
- Pages
- e1802404-e1802404
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2897850543
- Cited by
- 347
- References
- 67
- FWCI
- 13.53
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.