The DOI matches its Crossref record; 88 of the 88 references it cites were found in a registry or an index.
Design Strategies to Enable the Efficient Use of Sodium Metal Anodes in High‐Energy Batteries
Open accessAbstract
Sodium‐based batteries have attracted considerable attention and are recognized as ideal candidates for large‐scale and low‐cost energy storage. Sodium (Na) metal anodes are considered as one of the most promising anodes for next‐generation, high‐energy, Na‐based batteries owing to their high theoretical specific capacity (1166 mA h g−1) and low standard electrode potential. Herein, an overview of the recent developments in Na metal anodes for high‐energy batteries is provided. The high reactivity and large volume expansion of Na metal anodes during charge and discharge make the electrode/electrolyte interphase unstable, leading to the formation of Na dendrites, short cycle life, and safety issues. Design strategies to enable the efficient use of Na metal anodes are elucidated, including liquid electrolyte engineering, electrode/electrolyte interface optimization, sophisticated electrode construction, and solid electrolyte engineering. Finally, the remaining challenges and future research directions are identified. It is hoped that this progress report will shape a consistent view of this field and provide inspiration for future research to improve Na metal anodes and enable the development of high‐energy sodium batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Research Development on Sodium-Ion Batteries
Yabuuchi, N., Kubota, K., Dahbi, M., & Komaba, S. (2014) · Chemical Reviews · doi:10.1021/cr500192f · Cited by 6,478
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
A solid future for battery development
Janek, J., & Zeier, W. G. (2016) · Nature Energy · doi:10.1038/nenergy.2016.141 · Cited by 3,979
Self-citation“Water-in-salt” electrolyte enables high-voltage aqueous lithium-ion chemistries
Suo, L., Borodin, O., Gao, T., Olguin, M., Ho, J., Fan, X., Luo, C., Wang, C., & Xu, K. (2015) · Science · doi:10.1126/science.aab1595 · Cited by 3,821
Self-citationNa-ion batteries, recent advances and present challenges to become low cost energy storage systems
Palomares, V., Serras, P., Villaluenga, I., Hueso, K. B., Carretero-González, J., & Rojo, T. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02781j · Cited by 3,564
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Winter, M., Barnett, B., & Xu, K. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00422 · Cited by 2,193
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
Lin, D., Liu, Y., Liang, Z., Lee, H.-W., Sun, J., Wang, H., Yan, K., Xie, J., & Cui, Y. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.32 · Cited by 1,798
Self-citationThe Impact of Elastic Deformation on Deposition Kinetics at Lithium/Polymer Interfaces
Monroe, C., & Newman, J. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1850854 · Cited by 1,701
Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries
Zhang, X., Cheng, X., Chen, X., Yan, C., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605989 · Cited by 1,699
The Mechanisms of Lithium and Sodium Insertion in Carbon Materials
Stevens, D. A., & Dahn, J. R. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1379565 · Cited by 1,499
Electrochemical aspects of the generation of ramified metallic electrodeposits
Chazalviel, J.-N. (1990) · Physical Review A · doi:10.1103/physreva.42.7355 · Cited by 1,402
Sodium and Sodium‐Ion Batteries: 50 Years of Research
Delmas, C. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703137 · Cited by 1,361
Advanced Model for Solid Electrolyte Interphase Electrodes in Liquid and Polymer Electrolytes
Peled, E., Golodnitsky, D., & Ardel, G. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837858 · Cited by 1,205
Superionic glass-ceramic electrolytes for room-temperature rechargeable sodium batteries
Hayashi, A., Noi, K., Sakuda, A., & Tatsumisago, M. (2012) · Nature Communications · doi:10.1038/ncomms1843 · Cited by 1,060
All solid-state polymer electrolytes for high-performance lithium ion batteries
Yue, L., Ma, J., Zhang, J., Zhao, J., Dong, S., Liu, Z., Cui, G., & Chen, L. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2016.07.003 · Cited by 1,020
Update on Na-based battery materials. A growing research path
Palomares, V., Casas-Cabanas, M., Castillo-Martínez, E., Han, M. H., & Rojo, T. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41031e · Cited by 992
A Highly Reversible Room-Temperature Sodium Metal Anode
Seh, Z. W., Sun, J., Sun, Y., & Cui, Y. (2015) · ACS Central Science · doi:10.1021/acscentsci.5b00328 · Cited by 979
Dendritic growth mechanisms in lithium/polymer cells
Brissot, C., Rosso, M., Chazalviel, J.-N., & Lascaud, S. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00242-0 · Cited by 945
Review—Superconcentrated Electrolytes for Lithium Batteries
Yamada, Y., & Yamada, A. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0041514jes · Cited by 821
A rechargeable room-temperature sodium superoxide (NaO2) battery
Hartmann, P., Bender, C. L., Vračar, M., Dürr, A. K., Garsuch, A., Janek, J., & Adelhelm, P. (2013) · Nature Materials · doi:10.1038/nmat3486 · Cited by 786
Self-citationHigh temperature sodium batteries: status, challenges and future trends
Hueso, K. B., Armand, M., & Rojo, T. (2013) · Energy & Environmental Science · doi:10.1039/c3ee24086j · Cited by 774
Intergranular Li metal propagation through polycrystalline Li6.25Al0.25La3Zr2O12 ceramic electrolyte
Cheng, E. J., Sharafi, A., & Sakamoto, J. S. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.12.018 · Cited by 708
Zhang, R., Cheng, X., Zhao, C., Peng, H., Shi, J., Huang, J., Wang, J., Wei, F., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201504117 · Cited by 686
Elastic Properties of the Solid Electrolyte Li7La3Zr2O12(LLZO)
Yu, S., Schmidt, R. D., Garcia-Mendez, R., Herbert, E., Dudney, N. J., Wolfenstine, J. B., Sakamoto, J., & Siegel, D. J. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b03854 · Cited by 662
Extremely Stable Sodium Metal Batteries Enabled by Localized High-Concentration Electrolytes
Zheng, J., Chen, S., Zhao, W., Song, J., Engelhard, M. H., & Zhang, J.-G. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01213 · Cited by 579
A room-temperature sodium–sulfur battery with high capacity and stable cycling performance
Xu, X., Zhou, D., Qin, X., Lin, K., Kang, F., Li, B., Shanmukaraj, D., Rojo, T., Armand, M., & Wang, G. (2018) · Nature Communications · doi:10.1038/s41467-018-06443-3 · Cited by 563
Self-citationTEMPO: A Mobile Catalyst for Rechargeable Li-O2 Batteries
Bergner, B. J., Schürmann, A., Peppler, K., Garsuch, A., & Janek, J. (2014) · Journal of the American Chemical Society · doi:10.1021/ja508400m · Cited by 551
Self-citationFast ion transport at solid–solid interfaces in hybrid battery anodes
Tu, Z., Choudhury, S., Zachman, M. J., Wei, S., Zhang, K., Kourkoutis, L. F., & Archer, L. A. (2018) · Nature Energy · doi:10.1038/s41560-018-0096-1 · Cited by 536
Recent developments and insights into the understanding of Na metal anodes for Na-metal batteries
Zhao, Y., Adair, K. R., & Sun, X. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01373j · Cited by 533
Rechargeable Sodium All-Solid-State Battery
Zhou, W., Li, Y., Xin, S., & Goodenough, J. B. (2017) · ACS Central Science · doi:10.1021/acscentsci.6b00321 · Cited by 453
Busche, M. R., Drossel, T., Leichtweiss, T., Weber, D. A., Falk, M., Schneider, M., Reich, M.-L., Sommer, H., Adelhelm, P., & Janek, J. (2016) · Nature Chemistry · doi:10.1038/nchem.2470 · Cited by 452
Self-citationStone, G. M., Mullin, S. A., Teran, A. A., Hallinan, D. T., Minor, A. M., Hexemer, A., & Balsara, N. P. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.030203jes · Cited by 438
Dendrite‐Free Sodium‐Metal Anodes for High‐Energy Sodium‐Metal Batteries
Sun, B., Li, P., Zhang, J., Wang, D., Munroe, P., Wang, C., Notten, P. H. L., & Wang, G. (2018) · Advanced Materials · doi:10.1002/adma.201801334 · Cited by 416
Self-citationDesigning solid-liquid interphases for sodium batteries
Choudhury, S., Wei, S., Ozhabes, Y., Gunceler, D., Zachman, M. J., Tu, Z., Shin, J. H., Nath, P., Agrawal, A., Kourkoutis, L. F., et al. (2017) · Nature Communications · doi:10.1038/s41467-017-00742-x · Cited by 410
Gu, S., Wu, S., Cao, L., Li, M., Qin, N., Zhu, J., Wang, Z., Li, Y., Li, Z., Chen, J., et al. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b03467 · Cited by 396
Aguesse, F., Manalastas, W. W., Buannic, L., del Amo, J. M. L., Singh, G., Llordés, A., & Kilner, J. A. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13925 · Cited by 386
Ultrathin Surface Coating Enables the Stable Sodium Metal Anode
Luo, W., Lin, C., Zhao, O., Noked, M., Zhang, Y., Rubloff, G. W., & Hu, L. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601526 · Cited by 380
Superior Stable and Long Life Sodium Metal Anodes Achieved by Atomic Layer Deposition
Zhao, Y., Goncharova, L. V., Lushington, A., Sun, Q., Yadegari, H., Wang, B., Xiao, W., Li, R., & Sun, X. (2017) · Advanced Materials · doi:10.1002/adma.201606663 · Cited by 366
Recent Advances in Sodium-Ion Battery Materials
Fang, Y., Xiao, L., Chen, Z., et al. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0008-x · Cited by 365
Effects of Some Organic Additives on Lithium Deposition in Propylene Carbonate
Mogi, R., Inaba, M., Jeong, S.-K., Iriyama, Y., Abe, T., & Ogumi, Z. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1516770 · Cited by 360
Porous Al Current Collector for Dendrite-Free Na Metal Anodes
Liu, S., Tang, S., Zhang, X., Wang, A., Yang, Q.-H., & Luo, J. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b03185 · Cited by 336
3D Flexible Carbon Felt Host for Highly Stable Sodium Metal Anodes
Chi, S., Qi, X., Hu, Y., & Fan, L. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702764 · Cited by 332
Wang, T., Su, D., Shanmukaraj, D., Rojo, T., Armand, M., & Wang, G. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0009-9 · Cited by 328
Self-citationZheng, X., Bommier, C., Luo, W., Jiang, L., Hao, Y., & Huang, Y. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.04.014 · Cited by 321
The critical role of phase-transfer catalysis in aprotic sodium oxygen batteries
Xia, C., Black, R., Fernandes, R., Adams, B., & Nazar, L. F. (2015) · Nature Chemistry · doi:10.1038/nchem.2260 · Cited by 298
Ion–Solvent Complexes Promote Gas Evolution from Electrolytes on a Sodium Metal Anode
Chen, X., Shen, X., Li, B., Peng, H., Cheng, X., Li, B., Zhang, X., Huang, J., & Zhang, Q. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201711552 · Cited by 287
Luo, W., Zhang, Y., Xu, S., Dai, J., Hitz, E., Li, Y., Yang, C., Chen, C., Liu, B., & Hu, L. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b01138 · Cited by 285
Inorganic–Organic Coating via Molecular Layer Deposition Enables Long Life Sodium Metal Anode
Zhao, Y., Goncharova, L. V., Zhang, Q., Kaghazchi, P., Sun, Q., Lushington, A., Wang, B., Li, R., & Sun, X. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b02464 · Cited by 284
Wenzel, S., Leichtweiss, T., Weber, D. A., Sann, J., Zeier, W. G., & Janek, J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10119 · Cited by 275
Self-citationLee, J., Lee, Y., Lee, J., Lee, S.-M., Choi, J.-H., Kim, H., Kwon, M.-S., Kang, K., Lee, K. T., & Choi, N.-S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b14878 · Cited by 273
Alkali Metal Anodes for Rechargeable Batteries
Wang, H., Yu, D., Kuang, C., Cheng, L., Li, W., Feng, X., Zhang, Z., Zhang, X., & Zhang, Y. (2019) · Chem · doi:10.1016/j.chempr.2018.11.005 · Cited by 266
3D Wettable Framework for Dendrite‐Free Alkali Metal Anodes
Zhang, Y., Wang, C., Pastel, G., Kuang, Y., Xie, H., Li, Y., Liu, B., Luo, W., Chen, C., & Hu, L. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800635 · Cited by 265
Self-citationRecent progress in rational design of anode materials for high-performance Na-ion batteries
Cui, J., Yao, S., & Kim, J.-K. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.12.005 · Cited by 261
Su, D., Kretschmer, K., & Wang, G. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501785 · Cited by 258
Self-citationRecent advances in effective protection of sodium metal anode
Fan, L., & Li, X. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.09.017 · Cited by 255
Quasi–solid state rechargeable Na-CO 2 batteries with reduced graphene oxide Na anodes
Hu, X., Li, Z., Zhao, Y., Sun, J., Zhao, Q., Wang, J., Tao, Z., & Chen, J. (2017) · Science Advances · doi:10.1126/sciadv.1602396 · Cited by 233
Wang, H., Wang, C., Matios, E., & Li, W. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b03071 · Cited by 230
Self-citationProcessable and Moldable Sodium‐Metal Anodes
Wang, A., Hu, X., Tang, H., Zhang, C., Liu, S., Yang, Y., Yang, Q., & Luo, J. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201703937 · Cited by 221
Tian, H., Seh, Z. W., Yan, K., Fu, Z., Tang, P., Lu, Y., Zhang, R., Legut, D., Cui, Y., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602528 · Cited by 217
Self-citationRoom-Temperature Solid-State Sodium∕Sulfur Battery
Park, C.-W., Ahn, J.-H., Ryu, H.-S., Kim, K.-W., & Ahn, H.-J. (2006) · Electrochemical and Solid-State Letters · doi:10.1149/1.2164607 · Cited by 214
Na Reactivity toward Carbonate-Based Electrolytes: The Effect of FEC as Additive
Dugas, R., Ponrouch, A., Gachot, G., David, R., Palacin, M. R., & Tarascon, J. M. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0981610jes · Cited by 208
Wang, H., Wang, C., Matios, E., & Li, W. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201801818 · Cited by 205
Self-citationEthers Illume Sodium‐Based Battery Chemistry: Uniqueness, Surprise, and Challenges
Zhang, J., Wang, D., Lv, W., Qin, L., Niu, S., Zhang, S., Cao, T., Kang, F., & Yang, Q. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801361 · Cited by 205
High‐Performance Sodium Metal Anodes Enabled by a Bifunctional Potassium Salt
Shi, Q., Zhong, Y., Wu, M., Wang, H., & Wang, H. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201803049 · Cited by 185
Toward a Stable Sodium Metal Anode in Carbonate Electrolyte: A Compact, Inorganic Alloy Interface
Zheng, X., Fu, H., Hu, C., Xu, H., Huang, Y., Wen, J., Sun, H., Luo, W., & Huang, Y. (2019) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.8b03536 · Cited by 185
A highly stable sodium solid-state electrolyte based on a dodeca/deca-borate equimolar mixture
Duchêne, L., Kühnel, R.-S., Rentsch, D., Remhof, A., Hagemann, H., & Battaglia, C. (2017) · Chemical Communications · doi:10.1039/c7cc00794a · Cited by 177
Lee, Y., Lee, J., Lee, J., Kim, K., Cha, A., Kang, S., Wi, T., Kang, S. J., Lee, H.-W., & Choi, N.-S. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b02446 · Cited by 170
Seo, D. M., Borodin, O., Balogh, D., O'Connell, M., Ly, Q., Han, S.-D., Passerini, S., & Henderson, W. A. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.018308jes · Cited by 161
Nanocrevasse-Rich Carbon Fibers for Stable Lithium and Sodium Metal Anodes
Go, W., Kim, M.-H., Park, J., Lim, C. H., Joo, S. H., Kim, Y., & Lee, H.-W. (2019) · Nano Letters · doi:10.1021/acs.nanolett.8b04106 · Cited by 159
Dendrite-free Na metal plating/stripping onto 3D porous Cu hosts
Wang, T.-S., Liu, Y., Lu, Y.-X., Hu, Y.-S., & Fan, L.-Z. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.05.016 · Cited by 158
Protecting lithium/sodium metal anode with metal-organic framework based compact and robust shield
Qian, J., Li, Y., Zhang, M., Luo, R., Wang, F., Ye, Y., Xing, Y., Li, W., Qu, W., Wang, L., et al. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.04.030 · Cited by 152
Mechanical properties of the solid Li-ion conducting electrolyte: Li0.33La0.57TiO3
Cho, Y., Wolfenstine, J., Rangasamy, E., Kim, H., Choe, H., & Sakamoto, J. S. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6500-5 · Cited by 143
In situ atomic force microscopy study of nano–micro sodium deposition in ester-based electrolytes
Han, M., Zhu, C., Ma, T., Pan, Z., Tao, Z., & Chen, J. (2018) · Chemical Communications · doi:10.1039/c7cc09751d · Cited by 142
Wang, C., Wang, H., Matios, E., Hu, X., & Li, W. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201802282 · Cited by 141
Self-citationZhang, Q., Lu, Y., Miao, L., Zhao, Q. X., Xia, K., Liang, J., Chou, S., & Chen, J. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201808592 · Cited by 135
High Capacity, Dendrite‐Free Growth, and Minimum Volume Change Na Metal Anode
Zhao, Y., Yang, X., Kuo, L., Kaghazchi, P., Sun, Q., Liang, J., Wang, B., Lushington, A., Li, R., Zhang, H., et al. (2018) · Small · doi:10.1002/smll.201703717 · Cited by 133
Ultra-stable sodium metal-iodine batteries enabled by an in-situ solid electrolyte interphase
Tian, H., Shao, H., Chen, Y. W., Fang, X., Xiong, P., Sun, B., Notten, P. H. L., & Wang, G. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.12.084 · Cited by 118
Self-citationConcentrated Electrolyte for the Sodium–Oxygen Battery: Solvation Structure and Improved Cycle Life
He, M., Lau, K. C., Ren, X., Xiao, N., McCulloch, W. D., Curtiss, L. A., & Wu, Y. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201608607 · Cited by 117
Dendrite-free and long-life Na metal anode achieved by 3D porous Cu
Sun, J., Guo, C., Cai, Y., Li, J., Sun, X., Shi, W., Ai, S., Chen, C., & Jiang, F. (2019) · Electrochimica Acta · doi:10.1016/j.electacta.2019.04.002 · Cited by 72
Origins of Dendrite Formation in Sodium–Oxygen Batteries and Possible Countermeasures
Medenbach, L., Bender, C. L., Haas, R., Mogwitz, B., Pompe, C., Adelhelm, P., Schröder, D., & Janek, J. (2017) · Energy Technology · doi:10.1002/ente.201700326 · Cited by 66
Self-citationPiersma, B. J., Ryan, D. M., Schumacher, E. R., & Riechel, T. L. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836557 · Cited by 55
Wang, G., Xiong, X., Xie, D., Fu, X., Lin, Z., Yang, C., Zhang, K., & Liu, M. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b18101 · Cited by 53
Self-citationHigh Performance Na–CuCl 2 Rechargeable Battery toward Room Temperature ZEBRA‐Type Battery
Kim, B., Jeong, G., Kim, A., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600862 · Cited by 39
Publisher Correction: Advances and issues in developing salt-concentrated battery electrolytes
Yamada, Y., Wang, J., Ko, S., Watanabe, E., & Yamada, A. (2019) · Nature Energy · doi:10.1038/s41560-019-0375-5 · Cited by 37
Haas, R., Pompe, C., Osenberg, M., Hilger, A., Manke, I., Mogwitz, B., Maitra, U., Langsdorf, D., & Schröder, D. (2019) · Energy Technology · doi:10.1002/ente.201801146 · Cited by 22
Self-citation
Cited by
Anode‐Free Full Cells: A Pathway to High‐Energy Density Lithium‐Metal Batteries
Nanda, S., Gupta, A., & Manthiram, A. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000804 · Cited by 537
Revitalising sodium–sulfur batteries for non-high-temperature operation: a crucial review
Wang, Y., Zhou, D., Palomares, V., Shanmukaraj, D., Sun, B., Tang, X., Wang, C., Armand, M., Rojo, T., & Wang, G. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02203a · Cited by 327
Self-citationHuang, J., Wu, K., Xu, G., Wu, M., Dou, S., & Wu, C. (2023) · Chemical Society Reviews · doi:10.1039/d2cs01029a · Cited by 304
Lu, X., Zhao, H., Qin, Y., Matios, E., Luo, J., Chen, R., Nan, H., Wen, B., Zhang, Y., Li, Y., et al. (2023) · ACS Nano · doi:10.1021/acsnano.3c01759 · Cited by 53
Metadata
- Authors
- Sun, B., Xiong, P., Maitra, U., Langsdorf, D., Yan, K., Wang, C., Janek, J., Schröder, D., & Wang, G.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-10-10
- Volume
- 32
- Issue
- 18
- Pages
- e1903891-e1903891
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2980196518
- Cited by
- 355
- References
- 88
- FWCI
- 11.01
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.