The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
Interfacial Residual Stress Relaxation in Perovskite Solar Cells with Improved Stability
Abstract
To improve the photovoltaic performance (both efficiency and stability) in hybrid organic–inorganic halide perovskite solar cells, perovskite lattice distortion is investigated with regards to residual stress (and strain) in the polycrystalline thin films. It is revealed that residual stress is concentrated at the surface of the as‐prepared film, and an efficient method is further developed to release this interfacial stress by A site cation alloying. This results in lattice reconstruction at the surface of polycrystalline thin films, which in turn results in low elastic modulus. Thus, a “bone‐joint” configuration is constructed within the interface between the absorber and the carrier transport layer, which improves device performance substantially. The resultant photovoltaic devices exhibit an efficiency of 21.48% with good humidity stability and improved resistance against thermal cycling.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
The emergence of perovskite solar cells
Green, M. A., Ho-Baillie, A., & Snaith, H. J. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.134 · Cited by 7,432
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Self-citationSurface passivation of perovskite film for efficient solar cells
Jiang, Q., Zhao, Y., Zhang, X., Yang, X., Chen, Y., Chu, Z., Ye, Q., Li, X., Yin, Z., & You, J. (2019) · Nature Photonics · doi:10.1038/s41566-019-0398-2 · Cited by 4,736
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Saliba, M., Matsui, T., Domanski, K., Seo, J.-Y., Ummadisingu, A., Zakeeruddin, S. M., Correa-Baena, J.-P., Tress, W. R., Abate, A., Hagfeldt, A., et al. (2016) · Science · doi:10.1126/science.aah5557 · Cited by 3,706
One-Year stable perovskite solar cells by 2D/3D interface engineering
Grancini, G., Roldán-Carmona, C., Zimmermann, I., Mosconi, E., Lee, X., Martineau, D., Narbey, S., Oswald, F., De Angelis, F., Graetzel, M., et al. (2017) · Nature Communications · doi:10.1038/ncomms15684 · Cited by 2,068
Imperfections and their passivation in halide perovskite solar cells
Chen, B., Rudd, P. N., Yang, S., Yuan, Y., & Huang, J. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00853a · Cited by 1,959
Understanding Degradation Mechanisms and Improving Stability of Perovskite Photovoltaics
Boyd, C. C., Cheacharoen, R., Leijtens, T., & McGehee, M. D. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00336 · Cited by 1,777
Kim, M., Kim, G.-H., Lee, T. K., Choi, I. W., Choi, H. W., Jo, Y., Yoon, Y. J., Kim, J. W., Lee, J., Huh, D., et al. (2019) · Joule · doi:10.1016/j.joule.2019.06.014 · Cited by 1,753
Enhanced photovoltage for inverted planar heterojunction perovskite solar cells
Luo, D., Yang, W., Wang, Z., Sadhanala, A., Hu, Q., Su, R., Shivanna, R., Trindade, G. F., Watts, J. F., Xu, Z., et al. (2018) · Science · doi:10.1126/science.aap9282 · Cited by 1,510
Self-citationLigand-Stabilized Reduced-Dimensionality Perovskites
Quan, L. N., Yuan, M., Comin, R., Voznyy, O., Beauregard, E. M., Hoogland, S., Buin, A., Kirmani, A. R., Zhao, K., Amassian, A., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b11740 · Cited by 1,436
Wang, Z., Lin, Q., Chmiel, F. P., Sakai, N., Herz, L. M., & Snaith, H. J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.135 · Cited by 1,409
Strain engineering in perovskite solar cells and its impacts on carrier dynamics
Zhu, C., Niu, X., Fu, Y., Li, N., Hu, C., Chen, Y., He, X., Na, G., Liu, P., Zai, H., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-08507-4 · Cited by 1,042
Self-citationZhao, J., Deng, Y., Wei, H., Zheng, X., Yu, Z., Shao, Y., Shield, J. E., & Huang, J. (2017) · Science Advances · doi:10.1126/sciadv.aao5616 · Cited by 974
In situ observation of heat-induced degradation of perovskite solar cells
Divitini, G., Cacovich, S., Matteocci, F., Cinà, L., Di Carlo, A., & Ducati, C. (2016) · Nature Energy · doi:10.1038/nenergy.2015.12 · Cited by 782
Light-induced lattice expansion leads to high-efficiency perovskite solar cells
Tsai, H., Asadpour, R., Blancon, J.-C., Stoumpos, C. C., Durand, O., Strzalka, J. W., Chen, B., Verduzco, R., Ajayan, P. M., Tretiak, S., et al. (2018) · Science · doi:10.1126/science.aap8671 · Cited by 770
2D perovskite stabilized phase-pure formamidinium perovskite solar cells
Lee, J.-W., Dai, Z., Han, T.-H., Choi, C., Chang, S.-Y., Lee, S.-J., De Marco, N., Zhao, H., Sun, P., Huang, Y., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-05454-4 · Cited by 746
Defect and Contact Passivation for Perovskite Solar Cells
Aydin, E., De Bastiani, M., & De Wolf, S. (2019) · Advanced Materials · doi:10.1002/adma.201900428 · Cited by 681
Whitfield, P. S., Herron, N., Guise, W. E., Page, K., Cheng, Y. Q., Milas, I., & Crawford, M. K. (2016) · Scientific Reports · doi:10.1038/srep35685 · Cited by 586
De Marco, N., Zhou, H., Chen, Q., Sun, P., Liu, Z., Meng, L., Yao, E.-P., Liu, Y., Schiffer, A., & Yang, Y. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04060 · Cited by 564
Self-citationEnhanced Thermal Stability in Perovskite Solar Cells by Assembling 2D/3D Stacking Structures
Lin, Y., Bai, Y., Fang, Y., Chen, Z., Yang, S., Zheng, X., Tang, S., Liu, Y., Zhao, J., & Huang, J. (2018) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b02679 · Cited by 554
Self-citationEngineering Stress in Perovskite Solar Cells to Improve Stability
Rolston, N., Bush, K. A., Printz, A. D., Gold‐Parker, A., Ding, Y., Toney, M. F., McGehee, M. D., & Dauskardt, R. H. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802139 · Cited by 516
Structural Study on Cubic–Tetragonal Transition of CH3NH3PbI3
Kawamura, Y., Mashiyama, H., & Hasebe, K. (2002) · Journal of the Physical Society of Japan · doi:10.1143/jpsj.71.1694 · Cited by 510
Lattice strain causes non-radiative losses in halide perovskites
Jones, T. W., Osherov, A., Alsari, M., Sponseller, M., Duck, B. C., Jung, Y.-K., Settens, C., Niroui, F., Brenes, R., Stan, C. V., et al. (2019) · Energy & Environmental Science · doi:10.1039/c8ee02751j · Cited by 508
Self-citationDesign and understanding of encapsulated perovskite solar cells to withstand temperature cycling
Cheacharoen, R., Rolston, N., Harwood, D., Bush, K. A., Dauskardt, R. H., & McGehee, M. D. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02564e · Cited by 457
Strain-engineered growth of two-dimensional materials
Ahn, G. H., Amani, M., Rasool, H., Lien, D.-H., Mastandrea, J. P., Ager III, J. W., Dubey, M., Chrzan, D. C., Minor, A. M., & Javey, A. (2017) · Nature Communications · doi:10.1038/s41467-017-00516-5 · Cited by 399
Chemical Reduction of Intrinsic Defects in Thicker Heterojunction Planar Perovskite Solar Cells
Liu, Z., Hu, J., Jiao, H., Li, L., Zheng, G., Chen, Y., Huang, Y., Zhang, Q., Shen, C., Chen, Q., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606774 · Cited by 383
Self-citationBai, Y., Xiao, S., Hu, C., Zhang, T., Meng, X., Lin, H., Yang, Y., & Yang, S. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701038 · Cited by 369
Self-citationSelective growth of layered perovskites for stable and efficient photovoltaics
Cho, K. T., Grancini, G., Lee, Y., Oveisi, E., Ryu, J., Almora, O., Tschumi, M., Schouwink, P. A., Seo, G., Heo, S., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03513f · Cited by 367
Hybrid Perovskite/Perovskite Heterojunction Solar Cells
Hu, Y., Schlipf, J., Wussler, M., Petrus, M. L., Jaegermann, W., Bein, T., Müller-Buschbaum, P., & Docampo, P. (2016) · ACS Nano · doi:10.1021/acsnano.6b01535 · Cited by 345
Spanopoulos, I., Hadar, I., Ke, W., Tu, Q., Chen, M., Tsai, H., He, Y., Shekhawat, G., Dravid, V. P., Wasielewski, M. R., et al. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b01327 · Cited by 284
Jacobsson, T. J., Schwan, L. J., Ottosson, M., Hagfeldt, A., & Edvinsson, T. (2015) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.5b01481 · Cited by 280
Manipulation of facet orientation in hybrid perovskite polycrystalline films by cation cascade
Zheng, G., Zhu, C., Ma, J., Zhang, X., Tang, G., Li, R., Chen, Y., Li, L., Hu, J., Hong, J., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-05076-w · Cited by 278
Self-citationHighly Efficient and Stable Solar Cells Based on Crystalline Oriented 2D/3D Hybrid Perovskite
Zhou, T., Lai, H., Liu, T., Lu, D., Wan, X., Zhang, X., Liu, Y., & Chen, Y. (2019) · Advanced Materials · doi:10.1002/adma.201901242 · Cited by 272
The merit of perovskite's dimensionality; can this replace the 3D halide perovskite?
Etgar, L. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03397d · Cited by 244
Organic and perovskite solar cells for space applications
Cardinaletti, I., Vangerven, T., Nagels, S., Cornelissen, R., Schreurs, D., Hruby, J., Vodnik, J., Devisscher, D., Kesters, J., D’Haen, J., et al. (2018) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2018.03.024 · Cited by 230
Enhancing moisture tolerance in efficient hybrid 3D/2D perovskite photovoltaics
Koh, T. M., Shanmugam, V., Guo, X., Lim, S. S., Filonik, O., Herzig, E. M., Müller-Buschbaum, P., Swamy, V., Chien, S. T., Mhaisalkar, S. G., et al. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta09657g · Cited by 226
Controlling Thin-Film Stress and Wrinkling during Perovskite Film Formation
Bush, K. A., Rolston, N., Gold-Parker, A., Manzoor, S., Hausele, J., Yu, Z. J., Raiford, J. A., Cheacharoen, R., Holman, Z. C., Toney, M. F., et al. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00544 · Cited by 225
Jung, M., Shin, T. J., Seo, J., Kim, G., & Seok, S. I. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00995c · Cited by 195
Effect of Cation Composition on the Mechanical Stability of Perovskite Solar Cells
Rolston, N., Printz, A. D., Tracy, J. M., Weerasinghe, H. C., Vak, D., Haur, L. J., Priyadarshi, A., Mathews, N., Slotcavage, D. J., McGehee, M. D., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702116 · Cited by 194
Two Dimensional Organometal Halide Perovskite Nanorods with Tunable Optical Properties
Aharon, S., & Etgar, L. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b00665 · Cited by 188
Park, M., Kim, H. J., Jeong, I., Lee, J., Lee, H., Son, H. J., Kim, D., & Ko, M. J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501406 · Cited by 170
Thermo-mechanical behavior of organic-inorganic halide perovskites for solar cells
Ramírez, C., Yadavalli, S. K., Garcés, H. F., Zhou, Y., & Padture, N. P. (2018) · Scripta Materialia · doi:10.1016/j.scriptamat.2018.02.022 · Cited by 151
Liang, L., Cai, Y., Li, X., et al. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.07.049 · Cited by 121
Yu, J., Wang, M., & Lin, S. (2016) · ACS Nano · doi:10.1021/acsnano.6b05913 · Cited by 110
Out-of-Plane Mechanical Properties of 2D Hybrid Organic–Inorganic Perovskites by Nanoindentation
Tu, Q., Spanopoulos, I., Hao, S., et al. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b05138 · Cited by 101
Time‐Dependent Mechanical Response of APbX3 (A = Cs, CH3NH3; X = I, Br) Single Crystals
Reyes‐Martinez, M. A., Abdelhady, A. L., Saidaminov, M. I., Chung, D. Y., Bakr, O. M., Kanatzidis, M. G., Soboyejo, W. O., & Loo, Y. (2017) · Advanced Materials · doi:10.1002/adma.201606556 · Cited by 91
Stretching and Breaking of Ultrathin 2D Hybrid Organic–Inorganic Perovskites
Tu, Q., Spanopoulos, I., Yasaei, P., et al. (2018) · ACS Nano · doi:10.1021/acsnano.8b05623 · Cited by 85
Stasyuk, O. A., Szatyłowicz, H., Krygowski, T. M., & Guerra, C. F. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c5cp07483e · Cited by 79
Li, Z., Jiang, K., Khan, F., Goswami, A., Liu, J., Passian, A., & Thundat, T. G. (2019) · Science Advances · doi:10.1126/sciadv.aav2820 · Cited by 76
Murali, B., Yengel, E., Peng, W., Chen, Z., Alias, M. S., Alarousu, E., Ooi, B. S., Burlakov, V. M., Goriely, A., Eddaoudi, M., et al. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b02684 · Cited by 49
Updating the road map to metal-halide perovskites for photovoltaics
Matthews, P. D., Lewis, D. J., & O’Brien, P. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta04544a · Cited by 36
Cited by
Impact of strain relaxation on performance of α-formamidinium lead iodide perovskite solar cells
Kim, G., Min, H., Lee, K. S., Lee, D. Y., Yoon, S. M., & Seok, S. I. (2020) · Science · doi:10.1126/science.abc4417 · Cited by 1,346
Buried interface molecular hybrid for inverted perovskite solar cells
Liu, S., Li, J., Xiao, W., Chen, R., Sun, Z., Zhang, Y., Lei, X., Hu, S., Kober-Czerny, M., Wang, J., et al. (2024) · Nature · doi:10.1038/s41586-024-07723-3 · Cited by 1,090
Stabilizing black-phase formamidinium perovskite formation at room temperature and high humidity
Hui, W., Chao, L., Lu, H., Xia, F., Wei, Q., Su, Z., Niu, T., Tao, L., Du, B., Li, D., et al. (2021) · Science · doi:10.1126/science.abf7652 · Cited by 806
Towards commercialization: the operational stability of perovskite solar cells
Li, N., Niu, X., Chen, Q., & Zhou, H. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00573h · Cited by 633
Self-citationHighly efficient p-i-n perovskite solar cells that endure temperature variations
Li, G., Su, Z., Canil, L., Hughes, D., Aldamasy, M. H., Dagar, J., Trofimov, S., Wang, L., Zuo, W., Jerónimo-Rendon, J. J., et al. (2023) · Science · doi:10.1126/science.add7331 · Cited by 572
Metadata
- Authors
- Wang, H., Zhu, C., Liu, L., Ma, S., Liu, P., Wu, J., Shi, C., Du, Q., Hao, Y., Xiang, S., Chen, H., Chen, P., Bai, Y., Zhou, H., Li, Y., & Chen, Q.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-10-16
- Volume
- 31
- Issue
- 48
- Pages
- e1904408-e1904408
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2980994352
- Cited by
- 499
- References
- 52
- FWCI
- 14.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.