The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Rechargeable Lithium Metal Batteries with an In‐Built Solid‐State Polymer Electrolyte and a High Voltage/Loading Ni‐Rich Layered Cathode
Abstract
Solid‐state batteries enabled by solid‐state polymer electrolytes (SPEs) are under active consideration for their promise as cost‐effective platforms that simultaneously support high‐energy and safe electrochemical energy storage. The limited oxidative stability and poor interfacial charge transport in conventional polymer electrolytes are well known, but difficult challenges must be addressed if high‐voltage intercalating cathodes are to be used in such batteries. Here, ether‐based electrolytes are in situ polymerized by a ring‐opening reaction in the presence of aluminum fluoride (AlF 3) to create SPEs inside LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM) || Li batteries that are able to overcome both challenges. AlF 3 plays a dual role as a Lewis acid catalyst and for the building of fluoridized cathode–electrolyte interphases, protecting both the electrolyte and aluminum current collector from degradation reactions. The solid‐state NCM || Li metal batteries exhibit enhanced specific capacity of 153 mAh g−1 under high areal capacity of 3.0 mAh cm−2. This work offers an important pathway toward solid‐state polymer electrolytes for high‐voltage solid‐state batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Promise and reality of post-lithium-ion batteries with high energy densities
Choi, J. W., & Aurbach, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.13 · Cited by 5,110
“Water-in-salt” electrolyte enables high-voltage aqueous lithium-ion chemistries
Suo, L., Borodin, O., Gao, T., Olguin, M., Ho, J., Fan, X., Luo, C., Wang, C., & Xu, K. (2015) · Science · doi:10.1126/science.aab1595 · Cited by 3,821
Bachman, J. C., Muy, S., Grimaud, A., Chang, H.-H., Pour, N., Lux, S. F., Paschos, O., Maglia, F., Lupart, S., Lamp, P., et al. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00563 · Cited by 2,537
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Fetters, L. J., Lohse, D. J., Richter, D., Witten, T. A., & Zirkel, A. (1994) · Macromolecules · doi:10.1021/ma00095a001 · Cited by 1,999
Advances and issues in developing salt-concentrated battery electrolytes
Yamada, Y., Wang, J., Ko, S., Watanabe, E., & Yamada, A. (2019) · Nature Energy · doi:10.1038/s41560-019-0336-z · Cited by 1,788
Design principles for electrolytes and interfaces for stable lithium-metal batteries
Tikekar, M. D., Choudhury, S., Tu, Z., & Archer, L. A. (2016) · Nature Energy · doi:10.1038/nenergy.2016.114 · Cited by 1,765
Self-citationStable lithium electrodeposition in liquid and nanoporous solid electrolytes
Lu, Y., Tu, Z., & Archer, L. A. (2014) · Nature Materials · doi:10.1038/nmat4041 · Cited by 1,592
Self-citationTransition of lithium growth mechanisms in liquid electrolytes
Bai, P., Li, J., Brushett, F. R., & Bazant, M. Z. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01674j · Cited by 1,591
Accurate Determination of Coulombic Efficiency for Lithium Metal Anodes and Lithium Metal Batteries
Adams, B. D., Zheng, J., Ren, X., Xu, W., & Zhang, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702097 · Cited by 1,499
Self-citationMyung, S.-T., Maglia, F., Park, K.-J., Yoon, C. S., Lamp, P., Kim, S.-J., & Sun, Y.-K. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00594 · Cited by 1,382
Reviving Lithium‐Metal Anodes for Next‐Generation High‐Energy Batteries
Guo, Y., Li, H., & Zhai, T. (2017) · Advanced Materials · doi:10.1002/adma.201700007 · Cited by 1,215
A review of rechargeable batteries for portable electronic devices
Liang, Y., Zhao, C., Yuan, H., Chen, Y., Zhang, W., Huang, J., Yu, D., Liu, Y., Titirici, M., Chueh, Y., et al. (2019) · InfoMat · doi:10.1002/inf2.12000 · Cited by 1,174
Self-citationWan, J., Xie, J., Kong, X., Liu, Z., Liu, K., Shi, F., Pei, A., Chen, H., Chen, W., Chen, J., et al. (2019) · Nature Nanotechnology · doi:10.1038/s41565-019-0465-3 · Cited by 1,171
Stable cycling of high-voltage lithium metal batteries in ether electrolytes
Jiao, S., Ren, X., Cao, R., Engelhard, M. H., Liu, Y., Hu, D., Mei, D., Zheng, J., Zhao, W., Li, Q., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0199-8 · Cited by 1,149
Self-citationUltimate Limits to Intercalation Reactions for Lithium Batteries
Whittingham, M. S. (2014) · Chemical Reviews · doi:10.1021/cr5003003 · Cited by 1,130
Zhao, Q., Liu, X., Stalin, S., Khan, K., & Archer, L. A. (2019) · Nature Energy · doi:10.1038/s41560-019-0349-7 · Cited by 1,124
Self-citationSuperconcentrated electrolytes for a high-voltage lithium-ion battery
Wang, J., Yamada, Y., Sodeyama, K., Chiang, C. H., Tateyama, Y., & Yamada, A. (2016) · Nature Communications · doi:10.1038/ncomms12032 · Cited by 1,059
Designing polymers for advanced battery chemistries
Lopez, J., Mackanic, D. G., Cui, Y., & Bao, Z. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0103-6 · Cited by 894
Yan, P., Zheng, J., Liu, J., Wang, B., Cheng, X., Zhang, Y., Sun, X., Wang, C., & Zhang, J.-G. (2018) · Nature Energy · doi:10.1038/s41560-018-0191-3 · Cited by 826
Self-citationLu, Q., He, Y., Yu, Q., Li, B., Kaneti, Y. V., Yao, Y., Kang, F., & Yang, Q. (2017) · Advanced Materials · doi:10.1002/adma.201604460 · Cited by 727
Solid Electrolyte: the Key for High‐Voltage Lithium Batteries
Li, J., Ma, C., Chi, M., Liang, C., & Dudney, N. J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401408 · Cited by 721
Aurbach, D., Markovsky, B., Salitra, G., Markevich, E., Talyossef, Y., Koltypin, M., Nazar, L., Ellis, B., & Kovacheva, D. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.10.025 · Cited by 706
Liu, W., Li, X., Xiong, D., Hao, Y., Li, J., Kou, H., Yan, B., Li, D., Lu, S., Koo, A., et al. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.11.010 · Cited by 677
Bae, J., Li, Y., Zhang, J., Zhou, X., Zhao, F., Shi, Y., Goodenough, J. B., & Yu, G. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201710841 · Cited by 656
Lin, D., Yuen, P. Y., Liu, Y., Liu, W., Liu, N., Dauskardt, R. H., & Cui, Y. (2018) · Advanced Materials · doi:10.1002/adma.201802661 · Cited by 589
Double‐Layer Polymer Electrolyte for High‐Voltage All‐Solid‐State Rechargeable Batteries
Zhou, W., Wang, Z., Pu, Y., Li, Y., Xin, S., Li, X., Chen, J., & Goodenough, J. B. (2019) · Advanced Materials · doi:10.1002/adma.201805574 · Cited by 491
Duan, H., Fan, M., Chen, W., Li, J., Wang, P., Wang, W., Shi, J., Yin, Y., Wan, L., & Guo, Y. (2019) · Advanced Materials · doi:10.1002/adma.201807789 · Cited by 466
Busche, M. R., Drossel, T., Leichtweiss, T., Weber, D. A., Falk, M., Schneider, M., Reich, M.-L., Sommer, H., Adelhelm, P., & Janek, J. (2016) · Nature Chemistry · doi:10.1038/nchem.2470 · Cited by 452
Ohzuku, T., Ueda, A., & Kouguchi, M. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2048458 · Cited by 445
Singer, A., Zhang, M., Hy, S., Cela, D., Fang, C., Wynn, T. A., Qiu, B., Xia, Y., Liu, Z., Ulvestad, A., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0184-2 · Cited by 423
Zhou, D., Liu, R., He, Y., Li, F., Liu, M., Li, B., Yang, Q., Cai, Q., & Kang, F. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502214 · Cited by 408
Hybrid Electrolytes with Controlled Network Structures for Lithium Metal Batteries
Pan, Q., Smith, D. M., Qi, H., Wang, S., & Li, C. Y. (2015) · Advanced Materials · doi:10.1002/adma.201502059 · Cited by 345
Dual‐Phase Single‐Ion Pathway Interfaces for Robust Lithium Metal in Working Batteries
Xu, R., Xiao, Y., Zhang, R., Cheng, X., Zhao, C., Zhang, X., Yan, C., Zhang, Q., & Huang, J. (2019) · Advanced Materials · doi:10.1002/adma.201808392 · Cited by 338
Self-citationHuang, W., Zhu, Z., Wang, L., Wang, S., Li, H. M., Tao, Z., Shi, J., Guan, L., & Chen, J. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201302586 · Cited by 330
Fan, W., Li, N., Zhang, X., Zhao, S., Cao, R., Yin, Y., Xing, Y., Wang, J., Guo, Y., & Li, C. (2018) · Advanced Science · doi:10.1002/advs.201800559 · Cited by 300
Wang, H., Lin, D., Liu, Y., Li, Y., & Cui, Y. (2017) · Science Advances · doi:10.1126/sciadv.1701301 · Cited by 244
Liang, J.-Y., Zeng, X.-X., Zhang, X.-D., Wang, P.-F., Ma, J.-Y., Yin, Y.-X., Wu, X.-W., Guo, Y.-G., & Wan, L.-J. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b03319 · Cited by 244
Krämer, E., Schedlbauer, T., Hoffmann, B., Terborg, L., Nowak, S., Gores, H. J., Passerini, S., & Winter, M. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.081302jes · Cited by 172
Liang, L., Sun, X., Wu, C., Hou, L., Sun, J., Zhang, X., & Yuan, C. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b15808 · Cited by 162
A High‐Performance Li–B–H Electrolyte for All‐Solid‐State Li Batteries
Lu, F., Pang, Y., Zhu, M., Han, F., Yang, J., Fang, F., Sun, D., Zheng, S., & Wang, C. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201809219 · Cited by 133
Kinetic Study of Parasitic Reactions in Lithium-Ion Batteries: A Case Study on LiNi0.6Mn0.2Co0.2O2
Zeng, X., Xu, G., Li, Y., Luo, X., Maglia, F., Bauer, C., Lux, S. F., Paschos, O., Kim, S., Lamp, P., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b11800 · Cited by 111
Neudeck, S., Walther, F., Bergfeldt, T., Suchomski, C., Rohnke, M., Hartmann, P., Janek, J., & Brezesinski, T. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b04405 · Cited by 86
Mindemark, J., Imholt, L., Montero, J., & Brandell, D. (2016) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.28080 · Cited by 76
Cited by
Jiang, M., Danilov, D. L., Eichel, R., & Notten, P. H. L. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202103005 · Cited by 720
Interface Issues and Challenges in All‐Solid‐State Batteries: Lithium, Sodium, and Beyond
Lou, S., Zhang, F., Fu, C., Chen, M., Ma, Y., Yin, G., & Wang, J. (2021) · Advanced Materials · doi:10.1002/adma.202000721 · Cited by 548
Electrolytes and Interphases in Potassium Ion Batteries
Zhou, M., Bai, P., Ji, X., Yang, J., Wang, C., & Xu, Y. (2021) · Advanced Materials · doi:10.1002/adma.202003741 · Cited by 379
Progress in Solid Polymer Electrolytes for Lithium‐Ion Batteries and Beyond
An, Y., Han, X., Liu, Y., Azhar, A., Na, J., Nanjundan, A. K., Wang, S., Yu, J., & Yamauchi, Y. (2022) · Small · doi:10.1002/smll.202103617 · Cited by 363
Li, Z., Yu, R., Weng, S., Zhang, Q., Wang, X., & Guo, X. (2023) · Nature Communications · doi:10.1038/s41467-023-35857-x · Cited by 341
Self-citation
Metadata
- Authors
- Zhao, C., Zhao, Q., Liu, X., Zheng, J., Stalin, S., Zhang, Q., & Archer, L. A.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2020-02-13
- Volume
- 32
- Issue
- 12
- Pages
- e1905629-e1905629
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3006014650
- Cited by
- 261
- References
- 46
- FWCI
- 12.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.