The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.
Innervated, Self‐Sensing Liquid Crystal Elastomer Actuators with Closed Loop Control
Abstract
The programmable assembly of innervated LCE actuators (iLCEs) with prescribed contractile actuation, self‐sensing, and closed loop control via core–shell 3D printing is reported. This extrusion‐based direct ink writing method enables coaxial filamentary features composed of pure LM core surrounded by an LCE shell, whose director is aligned along the print path. Specifically, the thermal response of the iLCE fiber‐type actuators is programmed, measured, and modeled during Joule heating, including quantifying the concomitant changes in fiber length and resistance that arise during simultaneous heating and self‐sensing. Due to their reversible, high‐energy actuation and their resistive feedback, it is also demonstrated that iLCEs can be regulated with closed loop control even when perturbed with large bias loads. Finally, iLCE architectures capable of programmed, self‐sensing 3D shape change with closed loop control are fabricated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Design, fabrication and control of soft robots
Rus, D., & Tolley, M. T. (2015) · Nature · doi:10.1038/nature14543 · Cited by 5,825
(1999) · Cryogenic Heat Transfer · doi:10.1201/b15230-9 · Cited by 3,534
Directed bending of a polymer film by light
Yu, Y., Nakano, M., & Ikeda, T. (2003) · Nature · doi:10.1038/425145a · Cited by 2,169
An integrated design and fabrication strategy for entirely soft, autonomous robots
Wehner, M., Truby, R. L., Fitzgerald, D. J., Mosadegh, B., Whitesides, G. M., Lewis, J. A., & Wood, R. J. (2016) · Nature · doi:10.1038/nature19100 · Cited by 2,127
Self-citationFlexible mechanical metamaterials
Bertoldi, K., Vitelli, V., Christensen, J., & van Hecke, M. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.66 · Cited by 1,867
Programmable and adaptive mechanics with liquid crystal polymer networks and elastomers
White, T. J., & Broer, D. J. (2015) · Nature Materials · doi:10.1038/nmat4433 · Cited by 1,744
Dickey, M. D., Chiechi, R. C., Larsen, R. J., Weiss, E. A., Weitz, D. A., & Whitesides, G. M. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200701216 · Cited by 1,468
Bejan, A. (2013) · Wiley eBooks · doi:10.1002/9781118671627 · Cited by 1,433
Soft Actuators for Small-Scale Robotics
Hines, L., Petersen, K., Lum, G. Z., & Sitti, M. (2017) · Advanced Materials · doi:10.1002/adma.201603483 · Cited by 1,337
Liquid crystalline elastomers as actuators and sensors
Ohm, C., Brehmer, M., & Zentel, R. (2010) · Advanced Materials · doi:10.1002/adma.200904059 · Cited by 1,169
Voxelated liquid crystal elastomers
Ware, T. H., McConney, M. E., Wie, J. J., Tondiglia, V. P., & White, T. J. (2015) · Science · doi:10.1126/science.1261019 · Cited by 1,157
Advances in 4D Printing: Materials and Applications
Kuang, X., Roach, D. J., Wu, J., Hamel, C. M., Ding, Z., Wang, T., Dunn, M. L., & Qi, H. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805290 · Cited by 1,095
Markvicka, E. J., Bartlett, M. D., Huang, X., & Majidi, C. (2018) · Nature Materials · doi:10.1038/s41563-018-0084-7 · Cited by 1,067
Making waves in a photoactive polymer film
Gelebart, A. H., Jan Mulder, D., Varga, M., Konya, A., Vantomme, G., Meijer, E. W., Selinger, R. L. B., & Broer, D. J. (2017) · Nature · doi:10.1038/nature22987 · Cited by 1,065
Nematic liquid single crystal elastomers
Küpfer, J., & Finkelmann, H. (1991) · Die Makromolekulare Chemie, Rapid Communications · doi:10.1002/marc.1991.030121211 · Cited by 977
Palagi, S., Mark, A. G., Reigh, S. Y., Melde, K., Qiu, T., Zeng, H., Parmeggiani, C., Martella, D., Sanchez-Castillo, A., Kapernaum, N., et al. (2016) · Nature Materials · doi:10.1038/nmat4569 · Cited by 977
3D printing of soft robotic systems
Wallin, T. J., Pikul, J., & Shepherd, R. F. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0002-2 · Cited by 942
3D printing of liquid crystal elastomeric actuators with spatially programed nematic order
Kotikian, A., Truby, R. L., Boley, J. W., White, T. J., & Lewis, J. A. (2018) · Advanced Materials · doi:10.1002/adma.201706164 · Cited by 768
Self-citationHigh thermal conductivity in soft elastomers with elongated liquid metal inclusions
Bartlett, M. D., Kazem, N., Powell-Palm, M. J., Huang, X., Sun, W., Malen, J. A., & Majidi, C. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1616377114 · Cited by 682
Tailorable and programmable liquid-crystalline elastomers using a two-stage thiol–acrylate reaction
Yakacki, C. M., Saed, M., Nair, D. P., Gong, T., Reed, S. M., & Bowman, C. N. (2015) · RSC Advances · doi:10.1039/c5ra01039j · Cited by 570
He, Q., Wang, Z., Wang, Y., Minori, A., Tolley, M. T., & Cai, S. (2019) · Science Advances · doi:10.1126/sciadv.aax5746 · Cited by 564
Four-dimensional printing of liquid crystal elastomers
Ambulo, C. P., Burroughs, J. J., Boothby, J. M., Kim, H., Shankar, M. R., & Ware, T. H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11851 · Cited by 508
Untethered soft robotic matter with passive control of shape morphing and propulsion
Kotikian, A., McMahan, C., Davidson, E. C., Muhammad, J. M., Weeks, R. D., Daraio, C., & Lewis, J. A. (2019) · Science Robotics · doi:10.1126/scirobotics.aax7044 · Cited by 476
Self-citationSoft Ultrathin Electronics Innervated Adaptive Fully Soft Robots
Wang, C., Sim, K., Chen, J., Kim, H., Rao, Z., Li, Y., Chen, W., Song, J., Verduzco, R., & Yu, C. (2018) · Advanced Materials · doi:10.1002/adma.201706695 · Cited by 436
Shape-shifting structured lattices via multimaterial 4D printing
Boley, J. W., van Rees, W. M., Lissandrello, C., Horenstein, M. N., Truby, R. L., Kotikian, A., Lewis, J. A., & Mahadevan, L. (2019) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1908806116 · Cited by 420
Self-citationMolecularly-engineered, 4D-printed liquid crystal elastomer actuators
Saed, M. O., Ambulo, C. P., Kim, H., De, R., Raval, V., Searles, K., Siddiqui, D. A., Cue, J. M. O., Stefan, M. C., Shankar, M. R., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806412 · Cited by 383
A multifunctional shape-morphing elastomer with liquid metal inclusions
Ford, M. J., Ambulo, C. P., Kent, T. A., Markvicka, E. J., Pan, C., Malen, J., Ware, T. H., & Majidi, C. (2019) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1911021116 · Cited by 337
McCracken, J. M., Donovan, B. R., & White, T. J. (2020) · Advanced Materials · doi:10.1002/adma.201906564 · Cited by 333
Liquid Metal Direct Write and 3D Printing: A Review
Neumann, T. V., & Dickey, M. D. (2020) · Advanced Materials Technologies · doi:10.1002/admt.202000070 · Cited by 332
Universal inverse design of surfaces with thin nematic elastomer sheets
Aharoni, H., Xia, Y., Zhang, X., Kamien, R. D., & Yang, S. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1804702115 · Cited by 326
Liquid crystal elastomers: an introduction and review of emerging technologies
Ula, S. W., Traugutt, N. A., Volpe, R. H., Patel, R. R., Yu, K., & Yakacki, C. M. (2018) · Liquid Crystals Reviews · doi:10.1080/21680396.2018.1530155 · Cited by 316
Biomimetic Locomotion of Electrically Powered “Janus” Soft Robots Using a Liquid Crystal Polymer
Xiao, Y., Jiang, Z., Tong, X., & Zhao, Y. (2019) · Advanced Materials · doi:10.1002/adma.201903452 · Cited by 302
3D printed reversible shape changing soft actuators assisted by liquid crystal elastomers
Yuan, C., Roach, D. J., Dunn, C. K., Mu, Q., Kuang, X., Yakacki, C. M., Wang, T. J., Yu, K., & Qi, H. J. (2017) · Soft Matter · doi:10.1039/c7sm00759k · Cited by 300
Liu, S., Yuen, M. C., White, E. L., Boley, J. W., Deng, B., Cheng, G. J., & Kramer-Bottiglio, R. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b08722 · Cited by 283
Self-citationNovel ink for ambient condition printing of liquid crystal elastomers for 4D printing
Roach, D. J., Kuang, X., Yuan, C., Chen, K., & Qi, H. J. (2018) · Smart Materials and Structures · doi:10.1088/1361-665x/aae96f · Cited by 208
4D-Printable Liquid Metal–Liquid Crystal Elastomer Composites
Ambulo, C. P., Ford, M. J., Searles, K., Majidi, C., & Ware, T. H. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c19051 · Cited by 176
Saed, M. O., Torbati, A. H., Starr, C. A., Visvanathan, R., Clark, N. A., & Yakacki, C. M. (2017) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.24249 · Cited by 166
(1980) · Analytical Proceedings · doi:10.1039/ap9801700395 · Cited by 160
Liu, J., Gao, Y., Wang, H., Poling‐Skutvik, R., Osuji, C. O., & Yang, S. M. (2020) · Advanced Intelligent Systems · doi:10.1002/aisy.201900163 · Cited by 151
Shape changes in chemoresponsive liquid crystal elastomers
Boothby, J. M., Kim, H., & Ware, T. H. (2016) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2016.09.004 · Cited by 118
Liquid crystal elastomer–nanoparticle systems for actuation
Chambers, M., Finkelmann, H., Remškar, M., Sánchez‐Ferrer, A., Zalar, B., & ŽUMER, S. (2008) · Journal of Materials Chemistry · doi:10.1039/b812423j · Cited by 110
Magnetic Printing of Liquid Metal for Perceptive Soft Actuators with Embodied Intelligence
Ma, B., Xu, C., Cui, L., Chao, Z., & Liu, H. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c20418 · Cited by 102
Highly Stretchable, Weavable, and Washable Piezoresistive Microfiber Sensors
Yu, L., Yeo, J. C., Soon, R. H., Yeo, T., Lee, H. H., & Lim, C. T. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b19823 · Cited by 101
Soft actuators using liquid crystal elastomers with encapsulated liquid metal joule heaters
Kent, T. A., Ford, M. J., Markvicka, E. J., & Majidi, C. (2020) · Multifunctional Materials · doi:10.1088/2399-7532/ab835c · Cited by 90
Reconfiguring Nanocomposite Liquid Crystal Polymer Films with Visible Light
Hauser, A. W., Liu, D., Bryson, K. C., Hayward, R. C., & Broer, D. J. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b00165 · Cited by 64
An Untethered Soft Robot Based on Liquid Crystal Elastomers
Boothby, J. M., Gagnon, J. C., McDowell, E. G., Volkenburg, T. V., Currano, L. J., & Xia, Z. (2021) · Soft Robotics · doi:10.1089/soro.2020.0135 · Cited by 60
Physical Properties of Anisotropically Swelling Hydrogen-Bonded Liquid Crystal Polymer Actuators
Harris, K. D., Bastiaansen, C. W. M., & Broer, D. J. (2007) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2006.886033 · Cited by 59
Electrothermally driven structural colour based on liquid crystal elastomers
Jiang, Y. X., Xu, D., Li, X., Lin, C., Li, W., An, Q., Tao, C.-A., Tang, H., & Li, G. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm30176h · Cited by 56
On-Demand Multi-Resolution Liquid Alloy Printing Based on Viscoelastic Flow Squeezing
Wu, K., Zhang, P., Li, F., Guo, C. F., & Wu, Z. (2018) · Polymers · doi:10.3390/polym10030330 · Cited by 11
Cited by
Control Strategies for Soft Robot Systems
Wang, J., & Chortos, A. (2022) · Advanced Intelligent Systems · doi:10.1002/aisy.202100165 · Cited by 254
A dynamically reprogrammable surface with self-evolving shape morphing
Bai, Y., Wang, H., Xue, Y., Pan, Y., Kim, J.-T., Ni, X., Liu, T.-L., Yang, Y., Han, M., Huang, Y., et al. (2022) · Nature · doi:10.1038/s41586-022-05061-w · Cited by 168
Metadata
- Authors
- Kotikian, A., Morales, J. M., Lu, A., Mueller, J., Davidson, Z. S., Boley, J. W., & Lewis, J. A.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2021-05-31
- Volume
- 33
- Issue
- 27
- Pages
- e2101814-e2101814
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3164740901
- Cited by
- 305
- References
- 49
- FWCI
- 18.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.