Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite
The DOI matches its Crossref record; 194 of the 194 references it cites were found in a registry or an index.
Abstract
Additive manufacturing (AM) has brought about a revolution in the way we can manufacture complex products with customized features. AM has paved its way in the application areas ranging from aerospace, automotive, consumer to biomedical. AM of composites has attracted special attention due to its promise in improving, modifying, and diversifying the properties of generic materials through introducing reinforcements. This review provides a detailed landscape of fiber‐reinforced composites processed via AM techniques. Different AM processes, various material formulations, and strengths and drawbacks of AM methods are discussed. Emphasis is paid to AM techniques focusing on continuous fibers, as they hold the promise of becoming the next‐generation composite fabrication methodology. The article also tries to identify the potential of AM technology for fiber‐reinforced composites and delves into challenges facing the area.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
IOP Conference Series: Materials Science and Engineering
(2022) · IOP Conference Series: Materials Science and Engineering · doi:10.1088/1757-899x/1231/1/011001 · Cited by 10,357
Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: A review
Ma, P.-C., Siddiqui, N. A., Marom, G., & Kim, J.-K. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.07.003 · Cited by 3,414
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
Modification of the surface chemistry of activated carbons
Figueiredo, J. L., Pereira, M. F. R., Freitas, M. M. A., & Órfão, J. J. M. (1999) · Carbon · doi:10.1016/s0008-6223(98)00333-9 · Cited by 2,935
A Review of Additive Manufacturing
Wong, K. V., & Hernandez, A. (2012) · ISRN Mechanical Engineering · doi:10.5402/2012/208760 · Cited by 2,555
Ning, F., Cong, W., Qiu, J., Wei, J., & Wang, S. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.06.013 · Cited by 1,718
3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Highly oriented carbon fiber–polymer composites via additive manufacturing
Tekinalp, H. L., Kunc, V., Velez-Garcia, G. M., Duty, C. E., Love, L. J., Naskar, A. K., Blue, C. A., & Ozcan, S. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.10.009 · Cited by 1,514
A review of melt extrusion additive manufacturing processes: I. Process design and modeling
N. Turner, B., Strong, R., & A. Gold, S. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-01-2013-0012 · Cited by 1,450
Additive manufacturing methods and modelling approaches: a critical review
Bikas, H., Stavropoulos, P., & Chryssolouris, G. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7576-2 · Cited by 1,427
Zhao, Q., Qi, H. J., & Xie, T. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.04.001 · Cited by 1,409
3D Printing of Interdigitated Li‐Ion Microbattery Architectures
Sun, K., Wei, T., Ahn, B. Y., Seo, J. Y., Dillon, S. J., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201301036 · Cited by 1,341
Effect of processing conditions on the bonding quality of FDM polymer filaments
Sun, Q., Rizvi, G. M., Bellehumeur, C. T., & Gu, P. (2008) · Rapid Prototyping Journal · doi:10.1108/13552540810862028 · Cited by 1,277
A review on additive manufacturing of polymer-fiber composites
Parandoush, P., & Lin, D. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.08.088 · Cited by 1,270
Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes
Ahn, B. Y., Duoss, E. B., Motala, M. J., Guo, X., Park, S.-I., Xiong, Y., Yoon, J., Nuzzo, R. G., Rogers, J. A., & Lewis, J. A. (2009) · Science · doi:10.1126/science.1168375 · Cited by 1,191
Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites
Tian, X., Liu, T., Yang, C., Wang, Q., & Li, D. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.05.032 · Cited by 1,162
A 3D-printed, functionally graded soft robot powered by combustion
Bartlett, N. W., Tolley, M. T., Overvelde, J. T. B., Weaver, J. C., Mosadegh, B., Bertoldi, K., Whitesides, G. M., & Wood, R. J. (2015) · Science · doi:10.1126/science.aab0129 · Cited by 1,052
Dickson, A. N., Barry, J. N., McDonnell, K. A., & Dowling, D. P. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.06.004 · Cited by 792
Active materials by four-dimension printing
Ge, Q., Qi, H. J., & Dunn, M. L. (2013) · Applied Physics Letters · doi:10.1063/1.4819837 · Cited by 785
Turner, B. N., & Gold, S. A. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-02-2013-0017 · Cited by 770
Fused filament fabrication of fiber-reinforced polymers: A review
Brenken, B., Barocio, E., Favaloro, A., Kunc, V., & Pipes, R. B. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.01.002 · Cited by 737
Controlling the dispersion of multi-wall carbon nanotubes in aqueous surfactant solution
Yu, J., Grossiord, N., Koning, C. E., & Loos, J. (2007) · Carbon · doi:10.1016/j.carbon.2006.10.010 · Cited by 727
Short fiber reinforced composites for fused deposition modeling
Zhong, W., Li, F., Zhang, Z., Song, L., & Li, Z. (2001) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(00)01810-4 · Cited by 721
Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing
Li, N., Li, Y., & Liu, S. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.07.025 · Cited by 707
Composites Reinforced in Three Dimensions by Using Low Magnetic Fields
Erb, R. M., Libanori, R., Rothfuchs, N., & Studart, A. R. (2012) · Science · doi:10.1126/science.1210822 · Cited by 675
Goh, G. D., Dikshit, V., Nagalingam, A. P., Goh, G. L., Agarwala, S., Sing, S. L., Wei, J., & Yeong, W. Y. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.10.021 · Cited by 604
Self-citationMelenka, G. W., Cheung, B. K. O., Schofield, J. S., Dawson, M. R., & Carey, J. P. (2016) · Composite Structures · doi:10.1016/j.compstruct.2016.07.018 · Cited by 597
Development of new metal/polymer materials for rapid tooling using Fused deposition modelling
Masood, S. H., & Song, W. Q. (2004) · Materials & Design · doi:10.1016/j.matdes.2004.02.009 · Cited by 543
3D printing of wood fibre biocomposites: From mechanical to actuation functionality
Le Duigou, A., Castro, M., Bevan, R., & Martin, N. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.02.018 · Cited by 523
3D Printing of Continuous Carbon Fibre Reinforced Thermo-Plastic (CFRTP) Tensile Test Specimens
Der Klift, F. V., Koga, Y., Todoroki, A., Ueda, M., Hirano, Y., & Matsuzaki, R. (2016) · Open Journal of Composite Materials · doi:10.4236/ojcm.2016.61003 · Cited by 516
3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance
Yang, C., Tian, X., Liu, T., Cao, Y., & Li, D. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-08-2015-0098 · Cited by 515
Thermo-mechanical properties of a highly filled polymeric composites for Fused Deposition Modeling
Nikzad, M., Masood, S. H., & Sbarski, I. (2011) · Materials & Design · doi:10.1016/j.matdes.2011.01.056 · Cited by 503
The importance of carbon fiber to polymer additive manufacturing
Love, L. J., Kunc, V., Rios, O., Duty, C. E., Elliott, A. M., Post, B. K., Smith, R. J., & Blue, C. A. (2014) · Journal of Materials Research · doi:10.1557/jmr.2014.212 · Cited by 493
Fused deposition modelling with ABS–graphene nanocomposites
Dul, S., Fambri, L., & Pegoretti, A. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.03.013 · Cited by 491
Nanofiber‐reinforced polymers prepared by fused deposition modeling
Shofner, M. L., Lozano, K., Rodríguez‐Macías, F. J., & Barrera, E. V. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12496 · Cited by 484
3D Printable Graphene Composite
Wei, X., Li, D., Jiang, W., Gu, Z., Wang, X., Zhang, Z., & Sun, Z. (2015) · Scientific Reports · doi:10.1038/srep11181 · Cited by 481
Caminero, M. A., Chacón, J. M., García-Moreno, I., & Rodríguez, G. P. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.04.054 · Cited by 479
Characterization of 3D printed long fibre reinforced composites
Justo, J., Távara, L., García-Guzmán, L., & París, F. (2018) · Composite Structures · doi:10.1016/j.compstruct.2017.11.052 · Cited by 473
Composites by rapid prototyping technology
Kumar, S., & Kruth, J.-P. (2010) · Materials & Design · doi:10.1016/j.matdes.2009.07.045 · Cited by 463
Mohan, N., Senthil, P., Vinodh, S., & Jayanth, N. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1274490 · Cited by 457
Recycling and remanufacturing of 3D printed continuous carbon fiber reinforced PLA composites
Tian, X., Liu, T., Wang, Q., Dilmurat, A., Li, D., & Ziegmann, G. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.11.139 · Cited by 432
Caminero, M. A., Chacón, J. M., García-Moreno, I., & Reverte, J. M. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.04.038 · Cited by 421
Postiglione, G., Natale, G., Griffini, G., Levi, M., & Turri, S. (2015) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.05.014 · Cited by 399
Multi-shape active composites by 3D printing of digital shape memory polymers
Wu, J., Yuan, C., Ding, Z., Isakov, M., Mao, Y., Wang, T., Dunn, M. L., & Qi, H. J. (2016) · Scientific Reports · doi:10.1038/srep24224 · Cited by 399
Molecular mechanics of binding in carbon-nanotube–polymer composites
Lordi, V., & Yao, N. (2000) · Journal of Materials Research · doi:10.1557/jmr.2000.0396 · Cited by 377
3D Optical Printing of Piezoelectric Nanoparticle–Polymer Composite Materials
Kim, K., Zhu, W., Qu, X., Aaronson, C., McCall, W. R., Chen, S., & Sirbuly, D. J. (2014) · ACS Nano · doi:10.1021/nn503268f · Cited by 374
Interfacial characterization, control and modification of carbon fiber reinforced polymer composites
Liu, L., Jia, C., He, J., Zhao, F., Fan, D., Xing, L., Wang, M., Wang, F., Jiang, Z., & Huang, Y. (2015) · Composites Science and Technology · doi:10.1016/j.compscitech.2015.08.002 · Cited by 352
3D printed reversible shape changing components with stimuli responsive materials
Mao, Y., Ding, Z., Yuan, C., Ai, S., Isakov, M., Wu, J., Wang, T., Dunn, M. L., & Qi, H. J. (2016) · Scientific Reports · doi:10.1038/srep24761 · Cited by 348
4D printing of high performance shape memory polymer using stereolithography
Choong, Y. Y. C., Maleksaeedi, S., Eng, H., Wei, J., & Su, P.-C. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.04.049 · Cited by 328
Croft, K., Lessard, L., Pasini, D., Hojjati, M., Chen, J., & Yousefpour, A. (2011) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.01.007 · Cited by 327
Additive manufacturing of multi-directional preforms for composites: opportunities and challenges
Quan, Z., Wu, A., Keefe, M., Qin, X., Yu, J., Suhr, J., Byun, J.-H., Kim, B.-S., & Chou, T.-W. (2015) · Materials Today · doi:10.1016/j.mattod.2015.05.001 · Cited by 324
Frketic, J., Dickens, T., & Ramakrishnan, S. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.01.003 · Cited by 322
Hao, W., Liu, Y., Zhou, H., Chen, H., & Fang, D. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2017.11.004 · Cited by 319
Lewicki, J. P., Rodriguez, J. N., Zhu, C., Worsley, M. A., Wu, A. S., Kanarska, Y., Horn, J. D., Duoss, E. B., Ortega, J. M., Elmer, W., et al. (2017) · Scientific Reports · doi:10.1038/srep43401 · Cited by 318
Zhang, J., Zhao, S., Zhu, M., Zhu, Y., Zhang, Y., Liu, Z., & Zhang, C. (2014) · J. Mater. Chem. B · doi:10.1039/c4tb01063a · Cited by 317
Liao, G., Li, Z., Cheng, Y., Xu, D., Zhu, D., Jiang, S., Guo, J., Chen, X., Xu, G., & Zhu, Y. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.11.027 · Cited by 315
Evolution of 3D printed soft actuators
Zolfagharian, A., Kouzani, A. Z., Khoo, S. Y., Moghadam, A. A. A., Gibson, I., & Kaynak, A. (2016) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2016.09.028 · Cited by 314
A review of methods for improving the interfacial adhesion between carbon fiber and polymer matrix
Tang, L., & Kardos, J. L. (1997) · Polymer Composites · doi:10.1002/pc.10265 · Cited by 309
Recent developments in 3D printable composite materials
Kalsoom, U., Nesterenko, P. N., & Paull, B. (2016) · RSC Advances · doi:10.1039/c6ra11334f · Cited by 294
Chua, C. K., & Leong, K. F. (2017) · WORLD SCIENTIFIC eBooks · doi:10.1142/10200 · Cited by 294
3D-printed PEEK-carbon fiber (CF) composites: Structure and thermal properties
Stepashkin, А. А., Chukov, D. I., Senatov, F. S., Salimon, A. I., Korsunsky, A. M., & Kaloshkin, S. D. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.05.032 · Cited by 293
Lozano, K., Bonilla‐Rios, J., & Barrera, E. V. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.1200 · Cited by 292
Process-structure-property effects on ABS bond strength in fused filament fabrication
Abbott, A. C., Tandon, G. P., Bradford, R. L., Koerner, H., & Baur, J. W. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.11.002 · Cited by 291
Mechanical properties and interfacial characteristics of carbon-nanotube-reinforced epoxy thin films
Xu, X., Thwe, M. M., Shearwood, C., & Liao, K. (2002) · Applied Physics Letters · doi:10.1063/1.1511532 · Cited by 276
Structure-property relationship of nano enhanced stereolithography resin for desktop SLA 3D printer
Weng, Z., Zhou, Y., Lin, W., Senthil, T., & Wu, L. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.05.035 · Cited by 254
Chung, H., & Das, S. (2006) · Materials Science and Engineering: A · doi:10.1016/j.msea.2006.07.112 · Cited by 245
Fracture resistance measurement of fused deposition modeling 3D printed polymers
Aliheidari, N., Tripuraneni, R., Ameli, A., & Nadimpalli, S. (2017) · Polymer Testing · doi:10.1016/j.polymertesting.2017.03.016 · Cited by 244
Yan, C., Hao, L., Xu, L., & Shi, Y. (2011) · Composites Science and Technology · doi:10.1016/j.compscitech.2011.08.013 · Cited by 236
Processing of a Polyamide-12/carbon nanofibre composite by laser sintering
Goodridge, R. D., Shofner, M. L., Hague, R. J. M., McClelland, M., Schlea, M. R., Johnson, R. B., & Tuck, C. J. (2011) · Polymer Testing · doi:10.1016/j.polymertesting.2010.10.011 · Cited by 234
Microwave dielectric characterisation of 3D-printed BaTiO3/ABS polymer composites
Castles, F., Isakov, D., Lui, A., Lei, Q., Dancer, C. E. J., Wang, Y., Janurudin, J. M., Speller, S. C., Grovenor, C. R. M., & Grant, P. S. (2016) · Scientific Reports · doi:10.1038/srep22714 · Cited by 231
Improvement in mechanical properties of carbon fabric–epoxy composite using carbon nanofibers
Zhou, Y., Pervin, F., Jeelani, S., & Mallick, P. K. (2008) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2007.07.028 · Cited by 221
Fused Deposition Modelling of high temperature polymers: Exploring CNT PEEK composites
Berretta, S., Davies, R., Shyng, Y. T., Wang, Y., & Ghita, O. (2017) · Polymer Testing · doi:10.1016/j.polymertesting.2017.08.024 · Cited by 218
Ravi, A. K., Deshpande, A., & Hsu, K. H. (2016) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2016.08.007 · Cited by 217
Characterization of polyamide powders for determination of laser sintering processability
Verbelen, L., Dadbakhsh, S., Van den Eynde, M., Kruth, J.-P., Goderis, B., & Van Puyvelde, P. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.12.014 · Cited by 208
Kinetics of Nanotube and Microfiber Scission under Sonication
Lucas, A., Zakri, C., Maugey, M., Pasquali, M., van der Schoot, P., & Poulin, P. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp906296y · Cited by 207
Zhang, W., Cotton, C., Sun, J., Heider, D., Gu, B., Sun, B., & Chou, T.-W. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.11.018 · Cited by 203
Araya-Calvo, M., López-Gómez, I., Chamberlain-Simon, N., León-Salazar, J. L., Guillén-Girón, T., Corrales-Cordero, J. S., & Sánchez-Brenes, O. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.05.007 · Cited by 201
Van Hooreweder, B., Moens, D., Boonen, R., Kruth, J.-P., & Sas, P. (2013) · Polymer Testing · doi:10.1016/j.polymertesting.2013.04.014 · Cited by 190
Processing of 45S5 Bioglass® by lithography-based additive manufacturing
Tesavibul, P., Felzmann, R., Gruber, S., Liska, R., Thompson, I., Boccaccini, A. R., & Stampfl, J. (2012) · Materials Letters · doi:10.1016/j.matlet.2012.01.019 · Cited by 186
Effects of processing conditions on short TLCP fiber reinforced FDM parts
Gray, R. W., Baird, D. G., & Helge Bøhn, J. (1998) · Rapid Prototyping Journal · doi:10.1108/13552549810197514 · Cited by 183
Fiber reinforcement during 3D printing
Christ, S., Schnabel, M., Vorndran, E., Groll, J., & Gbureck, U. (2015) · Materials Letters · doi:10.1016/j.matlet.2014.10.065 · Cited by 183
Wang, S., Capoen, L., D’hooge, D. R., & Cardon, L. (2018) · Plastics, Rubber and Composites · doi:10.1080/14658011.2017.1397308 · Cited by 177
Shofner, M. L., Rodrı́guez-Macı́as, F. J., Vaidyanathan, R., & Barrera, E. V. (2003) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2003.07.002 · Cited by 176
Bone‐Inspired Materials by Design: Toughness Amplification Observed Using 3D Printing and Testing
Libonati, F., Gu, G. X., Qin, Z., Vergani, L., & Buehler, M. J. (2016) · Advanced Engineering Materials · doi:10.1002/adem.201600143 · Cited by 175
UV-Assisted 3D Printing of Glass and Carbon Fiber-Reinforced Dual-Cure Polymer Composites
Invernizzi, M., Natale, G., Levi, M., Turri, S., & Griffini, G. (2016) · Materials · doi:10.3390/ma9070583 · Cited by 174
Milosevic, M., Stoof, D., & Pickering, K. (2017) · Journal of Composites Science · doi:10.3390/jcs1010007 · Cited by 173
Mechanical characterization of 3D printed polymers for fiber reinforced polymers processing
Türk, D.-A., Brenni, F., Zogg, M., & Meboldt, M. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.01.050 · Cited by 168
3D printed anisotropic dielectric composite with meta-material features
Isakov, D. V., Lei, Q., Castles, F., Stevens, C. J., Grovenor, C. R. M., & Grant, P. S. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.12.176 · Cited by 167
Durability characterization of wet layup graphite/epoxy composites used in external strengthening
Abanilla, M. A., Li, Y., & Karbhari, V. M. (2005) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2005.05.016 · Cited by 162
Effect of Interface Structure on Mechanical Properties of Advanced Composite Materials
Gan, Y. X. (2009) · International Journal of Molecular Sciences · doi:10.3390/ijms10125115 · Cited by 156
Dieless Forming of Carbon Fibre Reinforced Plastic Parts Using 3D Printer
Mori, K., Maeno, T., & Nakagawa, Y. (2014) · Procedia Engineering · doi:10.1016/j.proeng.2014.10.196 · Cited by 155
Papargyris, D. A., Day, R., Nesbitt, A., et al. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.01.010 · Cited by 153
State-of-the-art of fiber-reinforced polymers in additive manufacturing technologies
Hofstätter, T., Pedersen, D. B., Tosello, G., & Hansen, H. N. (2017) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684417695648 · Cited by 152
3D printing of carbon fibre-reinforced plastic parts
Nakagawa, Y., Mori, K., & Maeno, T. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9891-7 · Cited by 150
3D-printable CFR polymer composites with dual-cure sequential IPNs
Griffini, G., Invernizzi, M., Levi, M., et al. (2016) · Polymer · doi:10.1016/j.polymer.2016.03.048 · Cited by 149
Three-Dimensional Printing of Highly Conductive Carbon Nanotube Microarchitectures with Fluid Ink
Kim, J.-H., Lee, S., Wajahat, M., Jeong, H., Chang, W. S., Jeong, H. J., Yang, J., Kim, J. T., & Seol, S. K. (2016) · ACS Nano · doi:10.1021/acsnano.6b04771 · Cited by 147
Ntim, S. A., Sae-Khow, O., Witzmann, F. A., & Mitra, S. (2010) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2010.12.052 · Cited by 142
Interfacial characteristics of composites fabricated by laminated object manufacturing
Klosterman, D., Chartoff, R. P., Graves, G., Osborne, N., & Priore, B. E. (1998) · Composites Part A Applied Science and Manufacturing · doi:10.1016/s1359-835x(98)00088-8 · Cited by 142
Djumas, L., Molotnikov, A., Simon, G. P., & Estrin, Y. (2016) · Scientific Reports · doi:10.1038/srep26706 · Cited by 138
Athreya, S. R., Kalaitzidou, K., & Das, S. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.12.028 · Cited by 135
Study of graphene oxide-based 3D printable composites: Effect of the in situ reduction
Chiappone, A., Roppolo, I., Naretto, E., Fantino, E., Calignano, F., Sangermano, M., & Pirri, C. F. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.05.049 · Cited by 129
Dimas, L. S., & Buehler, M. J. (2014) · Soft Matter · doi:10.1039/c3sm52890a · Cited by 128
Laser assisted additive manufacturing of continuous fiber reinforced thermoplastic composites
Parandoush, P., Tucker, L., Zhou, C., & Lin, D. L. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.06.013 · Cited by 128
Yuan, S., Bai, J., Chua, C., et al. (2016) · Polymers · doi:10.3390/polym8100370 · Cited by 126
Filgueira, D., Holmen, S., Melbø, J. K., Moldes, D., Echtermeyer, A. T., & Chinga‐Carrasco, G. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b02351 · Cited by 126
Wu, J., Hui, C., Wu, Q., et al. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.12.037 · Cited by 119
3-D printing of multifunctional carbon nanotube yarn reinforced components
Gardner, J. M., Sauti, G., Kim, J.-W., et al. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.06.008 · Cited by 116
Agarwal, K., Kuchipudi, S. C., Girard, B., & Houser, M. (2018) · Journal of Composite Materials · doi:10.1177/0021998318762297 · Cited by 113
Selective Laser Sintering of SiC/Polyamide Composites
Hon, K. K. B., & Gill, T. (2003) · CIRP Annals · doi:10.1016/s0007-8506(07)60558-7 · Cited by 110
State-of-the-art in empirical modelling of rapid prototyping processes
Garg, A., Tai, K., & Savalani, M. M. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-08-2012-0072 · Cited by 108
Yang, C., Wang, B., Li, D., & Tian, X. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1265992 · Cited by 108
Bai, J., Goodridge, R., Hague, R., et al. (2014) · Polymer Testing · doi:10.1016/j.polymertesting.2014.03.012 · Cited by 106
Modelling for randomly oriented multi material additive manufacturing component and its fabrication
Sugavaneswaran, M., & Arumaikkannu, G. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.08.102 · Cited by 106
Lu, L., Guo, P. Y., & Pan, Y. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4035964 · Cited by 105
Design and fabrication of low cost filament winding machine
Abdalla, F. H., Mutasher, S. A., Khalid, Y., et al. (2005) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2005.06.015 · Cited by 104
Wang, K., Wu, C., Qian, Z. Y., Zhang, C., Wang, B., & Vannan, M. A. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.06.006 · Cited by 99
Laser stereolithography and supercritical fluid processing for custom-designed implant fabrication
Popov, V. K., Evseev, A. V., Ivanov, A. L., et al. (2004) · Journal of Materials Science Materials in Medicine · doi:10.1023/b:jmsm.0000011812.08185.2a · Cited by 97
Zhu, W., Yan, C., Shi, Y., et al. (2016) · Scientific Reports · doi:10.1038/srep33780 · Cited by 97
Gray, R. W., Baird, D. G., & Bøhn, J. H. (1998) · Polymer Composites · doi:10.1002/pc.10112 · Cited by 94
Sandoval, J. H., Soto, K. F., Murr, L. E., et al. (2006) · Journal of Materials Science · doi:10.1007/s10853-006-1035-2 · Cited by 91
A Nanosilica/Nylon-12 Composite Powder for Selective Laser Sintering
Chunze, Y., Yusheng, S., Jinsong, Y., et al. (2008) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684408094062 · Cited by 91
Current achievements and future outlook for composites in 3D printing
Chapiro, M. (2016) · Reinforced Plastics · doi:10.1016/j.repl.2016.10.002 · Cited by 87
Shear induced alignment of short nanofibers in 3D printed polymer composites
Yunus, D. E., Shi, W., Sohrabi, S., et al. (2016) · Nanotechnology · doi:10.1088/0957-4484/27/49/495302 · Cited by 87
Printing Polymer Nanocomposites and Composites in Three Dimensions
Farahani, R. D., & Dubé, M. (2017) · Advanced Engineering Materials · doi:10.1002/adem.201700539 · Cited by 87
Saari, M., Cox, B., Richer, E., Krueger, P. S., & Cohen, A. L. (2015) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2015.0003 · Cited by 86
Abraham, D., Matthews, S., & McIlhagger, R. (1998) · Composites Part A Applied Science and Manufacturing · doi:10.1016/s1359-835x(98)00055-4 · Cited by 86
Mechanical properties of PLA-based composites for fused deposition modeling technology
Lebedev, S. M., Gefle, O. S., Amitov, E. T., Zhuravlev, D. V., Berchuk, D. Y., & Mikutskiy, E. A. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-1953-6 · Cited by 86
Salmoria, G. V., Ahrens, C. H., Beal, V. E., et al. (2008) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2008.05.016 · Cited by 85
Acoustic patterning for 3D embedded electrically conductive wire in stereolithography
Yunus, D. E., Sohrabi, S., He, R., et al. (2017) · Journal of Micromechanics and Microengineering · doi:10.1088/1361-6439/aa62b7 · Cited by 85
Gurr, M., Hofmann, D., Ehm, M., et al. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200800344 · Cited by 84
Composite rapid prototyping: overcoming the drawback of poor mechanical properties
Karalekas, D., & Antoniou, K. (2004) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2004.04.019 · Cited by 84
Dong, A., Yu, Y., Yuan, J., et al. (2014) · Applied Surface Science · doi:10.1016/j.apsusc.2014.02.092 · Cited by 84
Song, S. Y., Park, M. S., Lee, D. H., et al. (2018) · Nanomaterials · doi:10.3390/nano8020093 · Cited by 83
Abanilla, M. A., Karbhari, V. M., & Li, Y. (2006) · Composites Part B Engineering · doi:10.1016/j.compositesb.2006.02.023 · Cited by 80
Linear and Geometric Accuracies from Layer Manufacturing
Childs, T. H. C., & Juster, N. P. (1994) · CIRP Annals · doi:10.1016/s0007-8506(07)62187-8 · Cited by 80
A novel quasicrystal-resin composite for stereolithography
Sakly, A., Kenzari, S., Bonina, D., Corbel, S., & Fournée, V. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.11.025 · Cited by 79
Stichel, T., Frick, T., Laumer, T., et al. (2016) · Optics & Laser Technology · doi:10.1016/j.optlastec.2016.09.042 · Cited by 77
Extrusion Printing of Flexible Electrically Conducting Carbon Nanotube Networks
Pidcock, G. C., & Panhuis, M. I. H. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200724 · Cited by 76
Wang, K., Zhao, Y., Chang, Y.-H., Qian, Z. Y., Zhang, C., Wang, B., Vannan, M. A., & Wang, M. J. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.11.022 · Cited by 76
Material Extrusion of Continuous Fiber Reinforced Plastics Using Commingled Yarn
Vaneker, T. (2017) · Procedia CIRP · doi:10.1016/j.procir.2017.03.367 · Cited by 73
Sugavaneswaran, M., & Arumaikkannu, G. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.10.029 · Cited by 72
Fatigue crack growth of SLS polyamide 12: Effect of reinforcement and temperature
Salazar, A., Rico, A., Rodríguez, J., et al. (2013) · Composites Part B Engineering · doi:10.1016/j.compositesb.2013.12.017 · Cited by 68
Dual curing of carbon fiber reinforced photoresins for rapid prototyping
Gupta, A., & Ogale, A. A. (2002) · Polymer Composites · doi:10.1002/pc.10509 · Cited by 67
Zhang, Y. C., & Wang, X. (2005) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2005.02.038 · Cited by 67
Ultrasonic assembly of anisotropic short fibre reinforced composites
Scholz, M.-S., Drinkwater, B. W., & Trask, R. S. (2013) · Ultrasonics · doi:10.1016/j.ultras.2013.12.001 · Cited by 66
Dul, S., Pegoretti, A., & Fambri, L. (2018) · Nanomaterials · doi:10.3390/nano8090674 · Cited by 66
Gill, T., & Hon, K. K. B. (2004) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1243/0954405042323487 · Cited by 65
Lu, Z., Lu, F., Cao, J., et al. (2014) · Materials and Manufacturing Processes · doi:10.1080/10426914.2013.872269 · Cited by 62
Karalekas, D. (2003) · Materials & Design (1980-2015) · doi:10.1016/s0261-3069(03)00153-5 · Cited by 59
Mechanical characteristics of fiber‐filled photo‐polymer used in stereolithography
Cheah, C. M., Fuh, J. Y. H., Nee, A. Y. C., et al. (1999) · Rapid Prototyping Journal · doi:10.1108/13552549910278937 · Cited by 58
A magneto-rheological fluid mount featuring squeeze mode: analysis and testing
Chen, P., Bai, X.-X. ‘., Qian, L.-J., et al. (2016) · Smart Materials and Structures · doi:10.1088/0964-1726/25/5/055002 · Cited by 58
Enzymatic treatments of pulp using laccase and hydrophobic compounds
García-Ubasart, J., Esteban, A., Vila, C., et al. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.10.020 · Cited by 57
Mechanical properties of short‐fibre layered composites: prediction and experiment
Zak, G., Haberer, M., Park, C. B., et al. (2000) · Rapid Prototyping Journal · doi:10.1108/13552540010323583 · Cited by 54
On the mechanical response of randomly reinforced chopped-fibers composites: Data and model
Ioniţă, A., & Weitsman, Y. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.01.019 · Cited by 54
Holmes, L. R., & Riddick, J. C. (2013) · JOM · doi:10.1007/s11837-013-0828-4 · Cited by 50
The thermal conductivity of glass-fibre and carbon-fibre/epoxy composites from 2 to 80 k
Radcliffe, D. J., & Rosenberg, H. M. (1982) · Cryogenics · doi:10.1016/0011-2275(82)90122-9 · Cited by 50
Annual International Solid Freeform Fabrication Symposium
(2017) · doi:10.32656/sff · Cited by 49
Preparation and Mechanical Properties of Fiber Reinforced PLA for 3D Printing Materials
Li, X., Ni, Z., Bai, S., et al. (2018) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/322/2/022012 · Cited by 47
Post-cure shrinkage of photo-sensitive material used in laser lithography process
Fuh, J. Y. H., Choo, Y. S., Lü, L., et al. (1997) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(96)02744-6 · Cited by 46
Complex ceramic-polymer composite microparts made by microstereolithography
Provin, C., & Monneret, S. (2002) · IEEE Transactions on Electronics Packaging Manufacturing · doi:10.1109/tepm.2002.1000484 · Cited by 43
Arai, S., Tsunoda, S., Kawamura, R., et al. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.10.028 · Cited by 43
Layered-Manufacturing of Fiber-Reinforced Composites
Zak, G., Sela, M. N., Yevko, V., et al. (1999) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.2832702 · Cited by 42
Synthesis and preliminary studies on a ?-cyclodextrin-coupled chitosan as a novel adsorbent matrix
Sreenivasan, K. (1998) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19980808)69:6<1089::aid-app5>3.0.co;2-c · Cited by 40
Additive manufacturing of Continuous Wire Polymer Composites
Ibrahim, Y., Melenka, G. W., & Kempers, R. (2018) · Manufacturing Letters · doi:10.1016/j.mfglet.2018.04.001 · Cited by 40
Preparation of gelatin/Fe 3 O 4 composite scaffolds for enhanced and repeatable cancer cell ablation
Zhang, J., Li, J., Chen, S., et al. (2016) · Journal of Materials Chemistry B · doi:10.1039/c6tb01543c · Cited by 38
Energy and material flow modelling of additive manufacturing processes
Yosofi, M., Kerbrat, O., & Mognol, P. (2018) · Virtual and Physical Prototyping · doi:10.1080/17452759.2017.1418900 · Cited by 38
Chiu, S., Wicaksono, S. T., Chen, K.-T., et al. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2011-0124 · Cited by 37
Effect of Consolidation Method on the Mechanical Properties of Nonwoven Fabric Reinforced Composites
Wang, Y. (1999) · Applied Composite Materials · doi:10.1023/a:1008877110966 · Cited by 36
Chen, C., & Ma, C.-C. M. (1994) · Composites Science and Technology · doi:10.1016/0266-3538(94)90177-5 · Cited by 36
Nanostructural characterization of carbon nanotubes in laser-sintered polyamide 12 by 3D-TEM
Bai, J., Goodridge, R., Hague, R., Song, M., & Murakami, H. (2014) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2014.126 · Cited by 34
Mechanical Properties of Stitched Multiaxial Fabric Reinforced Composites From Mannual Layup Process
Wang, Y. (2002) · Applied Composite Materials · doi:10.1023/a:1013881422106 · Cited by 33
Preparation and Selective Laser Sintering of Nylon-12-Coated Aluminum Powders
Yan, C., Shi, Y., Yang, J.-S., et al. (2009) · Journal of Composite Materials · doi:10.1177/0021998309340932 · Cited by 33
(2007) · Choice Reviews Online · doi:10.5860/choice.44-5984 · Cited by 33
Weihong, Z., Li, F., Zhang, Z., et al. (2001) · Materials and Manufacturing Processes · doi:10.1081/amp-100103694 · Cited by 31
Insights into the development of a short-fiber reinforced polypropylene for laser sintering
Kleijnen, R. G., Sesseg, J. P. W., Schmid, M., et al. (2017) · AIP conference proceedings · doi:10.1063/1.5016791 · Cited by 31
Ma, C.-C. M., Lee, C.-T., & Wu, H. (1998) · Journal of Applied Polymer Science · Cited by 31
NAKAMOTO, T., & KOJIMA, S. (2012) · Journal of Advanced Mechanical Design Systems and Manufacturing · doi:10.1299/jamdsm.6.849 · Cited by 27
Viscosity analysis of photopolymer and glass‐fibre composites for rapid layered manufacturing
Zak, G., Chan, A. Y. F., Park, C. B., et al. (1996) · Rapid Prototyping Journal · doi:10.1108/13552549610129773 · Cited by 25
Luchoo, R., Harper, L. T., Bond, M. D., et al. (2010) · Plastics Rubber and Composites Macromolecular Engineering · doi:10.1179/174328910x12647080902493 · Cited by 24
Xie, J., Zhang, N. R., Guers, M. J., et al. (2002) · Smart Materials and Structures · doi:10.1088/0964-1726/11/4/313 · Cited by 24
Additive manufacturing of graded dielectrics
Roper, D. A., Good, B. L., McCauley, R., et al. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/4/045029 · Cited by 24
Effect of nanoparticles on tensile, impact and fatigue properties of fibre reinforced plastics
Nagalingam, R., Sundaram, S., Stanly, B., et al. (2010) · Bulletin of Materials Science · doi:10.1007/s12034-010-0080-2 · Cited by 23
Ni, X., Dong, A., Fan, X., Wang, Q., Yu, Y., & Cavaco-Paulo, A. M. (2015) · Fibers and Polymers · doi:10.1007/s12221-015-5475-7 · Cited by 23
CFPC material characteristics and SLS prototyping process
Floersheim, R., Hou, G., & Firestone, K. (2009) · Rapid Prototyping Journal · doi:10.1108/13552540910993860 · Cited by 22
Ni, X., Dong, A., Fan, X., et al. (2015) · Polymer Composites · doi:10.1002/pc.23699 · Cited by 19
Fiber Alignment in Directed Carbon Fiber Preforms - Mechanical Property Prediction
Harper, L. T., Turner, T. A., Martin, J. R. B., et al. (2009) · Journal of Composite Materials · doi:10.1177/0021998309347769 · Cited by 19
Design of a Slot-Coater-Based Layered-Composites Manufacturing System
Haberer, M., Zak, G., Park, C. B., et al. (2003) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.1581888 · Cited by 16
Whisker Alignment in Microparts Using Laser Stereolithography with Applied Electric Field
NAKAMOTO, T., Kanehisa, O., & SUGAWA, Y. (2013) · Journal of Advanced Mechanical Design Systems and Manufacturing · doi:10.1299/jamdsm.7.888 · Cited by 11
3D Printed Objects and Components Enabling Next Generation of True Soft Robotics
Fischer, A., Rommel, S., & Verl, A. W. (2015) · Soft Robotics · doi:10.1007/978-3-662-44506-8_17 · Cited by 9
31st Annual Technical Conference of the American Society for Composites 2016
Pernice, F., Carvalho, N. V. D., & Hallett, S. R. (2017) · Cited by 5
Fluid mechanics of slot-coating in photopolymer-based rapid composites manufacturing
Haberer, M., Zak, G., Park, C. B., et al. (2003) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1243/095440603762554622 · Cited by 4
Development of Unidirectional Fiber Reinforced Product
NAKAMOTO, T., & 松崎, 一. (2008) · International Journal of Automation Technology · doi:10.20965/ijat.2008.p0457 · Cited by 3
Study on selective laser sintering of glass fiber reinforced polystyrene
Yang, L., Wang, B., & Zhou, W. (2017) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/274/1/012118 · Cited by 3
Research works printed but not linked: 37
- Dirk H. J. A. L., 2012, Composites, Part B, 43, 997
- 10.1002/(SICI)1097-4628(19980808)69:6<1129::AID-APP10>3.0.CO;2-O · doi:10.1002/(sici)1097-4628(19980808)69:6<1129::aid-app10>3.0.co;2-o
- Ray T., 2016, 24th Int. Congress of Theoretical and Applied Mechanics
- Plymill A., 2016, Honors Thesis
- 10.1179/174328910X12647080902493 · DOI
- Namiki M., 2014, Proceedings of the Society of the Advancement of Material and Process Engineering
- Gardner J. M., 2016, SAMPE 2016
- Gervasi V. R., 1998, Solid Freeform Fabrication Symposium
- Ogale A. A., 1991, SAMPE Q., 23, 28
- Renault T., 1992, ANTEC 1992, 1, 745
- Greer C., 1996, Proc. Solid Freeform Fabrication Symp.
- Klosterman D., 1998, Solid Freeform Fabrication Symp. Proc.
- Wahab M. S., 2011, J. Mech. Eng. Automation, 1, 100
- Forderhase P., 1995, Proceedings of the Solid Freeform Fabrication Symposium
- Charan R., 1994, Fifth Int. Conf. Rapid Prototyping
- Yap Y. L., 2016, 2016 Annual International Solid Freeform Fabrication Symposium
- Tao W., 2016, 2016 Int. Symp. Flexible Automation (ISFA)
- Yap Y. L., 2014, Proc. 1st Int. Conf. Progress in Additive Manufacturing (Pro‐AM 2014)
- Dikshit V., 2016, Proc. 2nd Int. Conf. Progress in Additive Manufacturing (Pro‐AM 2016)
- Dikshit V., 2016, Proc. 2nd Int. Conf. Progress in Additive Manufacturing (Pro‐AM 2016)
- Yang D., 2017, J. Manuf. Mater. Process., 1, 10
- 10.1088/0957-4484/27/49/495302 · DOI
- Domm M., 2017, 21st Int. Conf. Composite Materials
- Mueller J., 2015, International Solid Freeform Fabrication Symp.
- Zhang M., 2016, ASME 2016 11th International Manufacturing Science and Engineering Conference
- 10.1016/j.mattod.2015.05.001 · DOI · Paper page
- Chuang K. C., 2015, CAMX Conf. Proc.
- Song X., 2016, Ph.D. Thesis
- Nelson J., 1993, Ph.D. Thesis
- Chung H., 2005, Ph.D. Thesis
- Zeng K., 2012, Proc. Solid Freeform Fabrication Symposium
- Flach L., 1998, Proc. Solid Freeform Fabrication Symposium
- Klosterman D., 2000, The 12nd Int. Conf. Composites (ICCM‐12)
- Flach L., 2000, Bridging the Centuries with SAMPE's Materials and Processes Technology: Long Beach Convention Center
- Brackett D., 2011, Proc. Solid Freeform Fabrication Symposium
- Tomlin M., 2011, Proc. 7th Altair CAE Technology Conf.
- Joven R., 2012, SAMPE Tech
Cited by
Fiber-Reinforced Polymer Composites: Manufacturing, Properties, and Applications
Rajak, D., Pagar, D., Menezes, P., & Linul, E. (2019) · Polymers · doi:10.3390/polym11101667 · Cited by 1,706
Wickramasinghe, S., Do, T., & Tran, P. (2020) · Polymers · doi:10.3390/polym12071529 · Cited by 1,052
Recent progress of reinforcement materials: a comprehensive overview of composite materials
Rajak, D. K., Pagar, D. D., Kumar, R., & Pruncu, C. I. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.09.068 · Cited by 883
Recent Progress on Polymer Materials for Additive Manufacturing
Tan, L. J., Zhu, W., & Zhou, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003062 · Cited by 740
Kabir, S. M. F., Mathur, K., & Seyam, A.-F. M. (2020) · Composite Structures · doi:10.1016/j.compstruct.2019.111476 · Cited by 678
Metadata
- Authors
- Goh, G. D., Yap, Y. L., Agarwala, S., & Yeong, W. Y.
- Affiliations
- Nanyang Technological University (SG)
- Corresponding author
- Yeong, Wai Yee
- Venue
- Advanced Materials Technologies
- Publisher
- Wiley
- Published
- 2018-10-08
- Volume
- 4
- Issue
- 1
- ISSN
- 2365-709X (ISSN-L)
- OpenAlex
- W2895467115
- Cited by
- 621
- References
- 194
- Citations by year
- 2026: 82 · 2025: 84 · 2024: 115 · 2023: 106 · 2022: 71 · 2021: 78 · 2020: 59 · 2019: 26
- FWCI
- 21.56
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Materials Technologies (publishedVersion)
- DR-NTU (Nanyang Technological University) (submittedVersion)
- Funders
- National Research Foundation Singapore
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Physical Sciences › Engineering › Mechanical Engineering › Fiber-reinforced polymer composites
- Physical Sciences › Engineering › Mechanical Engineering › Additive Manufacturing Materials and Processes
- Keywords
- additive manufacturing, fiber-reinforced polymer, continuous fibers, composite manufacturing, aerospace composites, automotive composites, biomedical composites
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.