The DOI matches its Crossref record; 129 of the 129 references it cites were found in a registry or an index.
A Review on Functionally Graded Materials and Structures via Additive Manufacturing: From Multi‐Scale Design to Versatile Functional Properties
Open accessAbstract
Functionally graded materials (FGMs) and functionally graded structures (FGSs) are special types of advanced composites with peculiar features and advantages. This article reviews the design criteria of functionally graded additive manufacturing (FGAM), which is capable of fabricating gradient components with versatile functional properties. Conventional geometrical‐based design concepts have limited potential for FGAM and multi‐scale design concepts (from geometrical patterning to microstructural design) are needed to develop gradient components with specific graded properties at different locations. FGMs and FGSs are of great interest to a larger range of industrial sectors and applications including aerospace, automotive, biomedical implants, optoelectronic devices, energy absorbing structures, geological models, and heat exchangers. This review presents an overview of various fabrication ideas and suggestions for future research in terms of design and creation of FGMs and FGSs, benefiting a wide variety of scientific fields.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fronts propagating with curvature-dependent speed: Algorithms based on Hamilton-Jacobi formulations
Osher, S., & Sethian, J. A. (1988) · Journal of Computational Physics · doi:10.1016/0021-9991(88)90002-2 · Cited by 14,062
Generating optimal topologies in structural design using a homogenization method
Bendsøe, M. P., & Kikuchi, N. (1988) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/0045-7825(88)90086-2 · Cited by 7,467
The method of moving asymptotes—a new method for structural optimization
Svanberg, K. (1987) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.1620240207 · Cited by 5,573
Bioinspired structural materials
Wegst, U. G. K., Bai, H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2015) · Nature Materials · doi:10.1038/nmat4089 · Cited by 4,721
Optimal shape design as a material distribution problem
Bendsøe, M. P. (1989) · Structural Optimization · doi:10.1007/bf01650949 · Cited by 4,521
A simple evolutionary procedure for structural optimization
Xie, Y. M., & Steven, G. P. (1993) · Computers & Structures · doi:10.1016/0045-7949(93)90035-c · Cited by 2,707
A 99 line topology optimization code written in Matlab
Sigmund, O. (2001) · Structural and Multidisciplinary Optimization · doi:10.1007/s001580050176 · Cited by 2,688
A review on fundamentals and applications of electrophoretic deposition (EPD)
BESRA, L., & LIU, M. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2006.07.001 · Cited by 2,258
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Tofail, S. A. M., Koumoulos, E. P., Bandyopadhyay, A., Bose, S., O’Donoghue, L., & Charitidis, C. (2018) · Materials Today · doi:10.1016/j.mattod.2017.07.001 · Cited by 2,136
Thijs, L., Kempen, K., Kruth, J.-P., & Van Humbeeck, J. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.11.052 · Cited by 1,917
Kok, Y., Tan, X. P., Wang, P., Nai, M. L. S., Loh, N. H., Liu, E., & Tor, S. B. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.11.021 · Cited by 1,447
Developments in construction-scale additive manufacturing processes
Lim, S., Buswell, R. A., Le, T. T., Austin, S. A., Gibb, A. G. F., & Thorpe, T. (2012) · Automation in Construction · doi:10.1016/j.autcon.2011.06.010 · Cited by 1,205
4D Printing: Multi‐Material Shape Change
Tibbits, S. (2014) · Architectural Design · doi:10.1002/ad.1710 · Cited by 1,188
Thompson, S. M., Bian, L., Shamsaei, N., & Yadollahi, A. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.07.001 · Cited by 1,179
Structural Biological Materials: Critical Mechanics-Materials Connections
Meyers, M. A., McKittrick, J., & Chen, P.-Y. (2013) · Science · doi:10.1126/science.1220854 · Cited by 1,171
A 3D-printed, functionally graded soft robot powered by combustion
Bartlett, N. W., Tolley, M. T., Overvelde, J. T. B., Weaver, J. C., Mosadegh, B., Bertoldi, K., Whitesides, G. M., & Wood, R. J. (2015) · Science · doi:10.1126/science.aab0129 · Cited by 1,052
Volumetric additive manufacturing via tomographic reconstruction
Kelly, B. E., Bhattacharya, I., Heidari, H., Shusteff, M., Spadaccini, C. M., & Taylor, H. K. (2019) · Science · doi:10.1126/science.aau7114 · Cited by 1,025
Functionally graded materials: A review of fabrication and properties
Naebe, M., & Shirvanimoghaddam, K. (2016) · Applied Materials Today · doi:10.1016/j.apmt.2016.10.001 · Cited by 986
Liu, Z., Meyers, M. A., Zhang, Z., & Ritchie, R. O. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.04.013 · Cited by 895
Structure and mechanics of interfaces in biological materials
Barthelat, F., Yin, Z., & Buehler, M. J. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.7 · Cited by 765
Three‐dimensional printing of porous ceramic scaffolds for bone tissue engineering
Seitz, H., Rieder, W., Irsen, S., Leukers, B., & Tille, C. (2005) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30291 · Cited by 742
Biomaterial systems for mechanosensing and actuation
Fratzl, P., & Barth, F. G. (2009) · Nature · doi:10.1038/nature08603 · Cited by 706
Maskery, I., Aboulkhair, N. T., Aremu, A. O., Tuck, C. J., Ashcroft, I. A., Wildman, R. D., & Hague, R. J. M. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.06.013 · Cited by 706
Carroll, B. E., Otis, R., Borgonia, J. P., Suh, J.-O., Dillon, R. P., Shapiro, A. A., Hofmann, D. C., Liu, Z., & Beese, A. M. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.019 · Cited by 657
Processing and properties of advanced porous ceramics: An application based review
Hammel, E. C., Ighodaro, O. L.-R., & Okoli, O. I. (2014) · Ceramics International · doi:10.1016/j.ceramint.2014.06.095 · Cited by 563
Structure and mechanical properties of selected biological materials
Chen, P.-Y., Lin, A. Y. M., Lin, Y.-S., Seki, Y., Stokes, A. G., Peyras, J., Olevsky, E. A., Meyers, M. A., & McKittrick, J. (2008) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2008.02.003 · Cited by 558
Evolution of solidification texture during additive manufacturing
Wei, H. L., Mazumder, J., & DebRoy, T. (2015) · Scientific Reports · doi:10.1038/srep16446 · Cited by 557
Vaezi, M., Chianrabutra, S., Mellor, B., & Yang, S. (2013) · Virtual and Physical Prototyping · doi:10.1080/17452759.2013.778175 · Cited by 548
Recent development in modeling and analysis of functionally graded materials and structures
Gupta, A., & Talha, M. (2015) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2015.07.001 · Cited by 531
Wang, T., Zhu, Y. Y., Zhang, S. Q., et al. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.01.256 · Cited by 530
Al-saedi, D. S. J., Masood, S. H., Faizan‐Ur‐Rab, M., Alomarah, A., & Ponnusamy, P. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.01.059 · Cited by 527
Designing bioinspired composite reinforcement architectures via 3D magnetic printing
Martin, J. J., Fiore, B. E., & Erb, R. M. (2015) · Nature Communications · doi:10.1038/ncomms9641 · Cited by 515
Panesar, A., Abdi, M., Hickman, D., & Ashcroft, I. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.11.008 · Cited by 489
Choy, S. Y., Sun, C.-N., Leong, K. F., & Wei, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.06.006 · Cited by 481
An overview of functionally graded additive manufacturing
Loh, G. H., Pei, E., Harrison, D., & Monzón, M. D. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.06.023 · Cited by 459
Materials design principles of ancient fish armour
Bruet, B. J. F., Song, J., Boyce, M. C., & Ortiz, C. (2008) · Nature Materials · doi:10.1038/nmat2231 · Cited by 447
Bobbio, L. D., Otis, R., Borgonia, J. P., Dillon, R. P., Shapiro, A. A., Liu, Z., & Beese, A. M. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.070 · Cited by 447
Ishimoto, T., Hagihara, K., Hisamoto, K., Sun, S., & Nakano, T. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.12.038 · Cited by 446
Yang, W., Chen, I. H., Gludovatz, B., Zimmermann, E. A., Ritchie, R. O., & Meyers, M. A. (2013) · Advanced Materials · doi:10.1002/adma.201202713 · Cited by 426
Applications of 3D printing in cardiovascular diseases
Giannopoulos, A. A., Mitsouras, D., Yoo, S.-J., Liu, P. P., Chatzizisis, Y. S., & Rybicki, F. J. (2016) · Nature Reviews Cardiology · doi:10.1038/nrcardio.2016.170 · Cited by 421
A review on functionally graded structures and materials for energy absorption
Xu, F., Zhang, X., & Zhang, H. (2018) · Engineering Structures · doi:10.1016/j.engstruct.2018.05.094 · Cited by 421
Self-citationInvestigation of functionally graded TPMS structures fabricated by additive manufacturing
Yu, S., Sun, J., & Bai, J. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108021 · Cited by 414
Shevchik, S. A., Kenel, C., Leinenbach, C., & Wasmer, K. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.11.012 · Cited by 403
Yang, L., Mertens, R., Ferrucci, M., Yan, C., Shi, Y., & Yang, S. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.12.007 · Cited by 400
Parthasarathy, J., Starly, B., & Raman, S. (2011) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2011.01.004 · Cited by 392
Simulation of metal additive manufacturing microstructures using kinetic Monte Carlo
Rodgers, T. M., Madison, J. D., & Tikare, V. (2017) · Computational Materials Science · doi:10.1016/j.commatsci.2017.03.053 · Cited by 369
Gandin, C. A., Desbiolles, J. L., Rappaz, M., & Thevoz, P. (1999) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-999-0226-2 · Cited by 360
Developing Gradient Metal Alloys through Radial Deposition Additive Manufacturing
Hofmann, D. C., Roberts, S., Otis, R., Kolodziejska, J., Dillon, R. P., Suh, J.-O., Shapiro, A. A., Liu, Z.-K., & Borgonia, J.-P. (2014) · Scientific Reports · doi:10.1038/srep05357 · Cited by 314
Cheng, L., Bai, J., & To, A. C. (2019) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2018.10.010 · Cited by 306
Li, D., Liao, W., Dai, N., Dong, G., Tang, Y., & Xie, Y. M. (2018) · Computer-Aided Design · doi:10.1016/j.cad.2018.06.003 · Cited by 303
Gas flow effects on selective laser melting (SLM) manufacturing performance
Ferrar, B., Mullen, L., Jones, E., Stamp, R., & Sutcliffe, C. J. (2012) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2011.09.020 · Cited by 302
Adaptive metamaterials by functionally graded 4D printing
Bodaghi, M., Damanpack, A. R., & Liao, W. H. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.08.069 · Cited by 302
Zhang, X.-Y., Fang, G., Leeflang, S., Zadpoor, A. A., & Zhou, J. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.12.013 · Cited by 277
Design of graded lattice structure with optimized mesostructures for additive manufacturing
Wang, Y., Zhang, L., Daynes, S., Zhang, H., Feih, S., & Wang, M. Y. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.01.011 · Cited by 276
Self-citationRapid, continuous additive manufacturing by volumetric polymerization inhibition patterning
de Beer, M. P., van der Laan, H. L., Cole, M. A., Whelan, R. J., Burns, M. A., & Scott, T. F. (2019) · Science Advances · doi:10.1126/sciadv.aau8723 · Cited by 261
Compositionally graded metals: A new frontier of additive manufacturing
Hofmann, D. C., Kolodziejska, J., Roberts, S., Otis, R., Dillon, R. P., Suh, J.-O., Liu, Z.-K., & Borgonia, J.-P. (2014) · Journal of Materials Research · doi:10.1557/jmr.2014.208 · Cited by 255
Biomedical applications of additive manufacturing: Present and future
Singh, S., & Ramakrishna, S. (2017) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2017.05.006 · Cited by 248
Zinoviev, A. V., Zinovieva, O., Ploshikhin, V., et al. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.125 · Cited by 246
Onuike, B., Heer, B., & Bandyopadhyay, A. K. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.02.007 · Cited by 232
Sun, W., Starly, B., Darling, A., & Gomez, C. (2004) · Biotechnology and Applied Biochemistry · doi:10.1042/ba20030109 · Cited by 223
DePond, P. J., Guss, G., Ly, S., Calta, N. P., Deane, D., Khairallah, S., & Matthews, M. J. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.05.050 · Cited by 222
Yu, K., Ritchie, A., Mao, Y., Dunn, M. L., & Qi, H. J. (2015) · Procedia IUTAM · doi:10.1016/j.piutam.2014.12.021 · Cited by 220
Rai, A., Markl, M., & Körner, C. (2016) · Computational Materials Science · doi:10.1016/j.commatsci.2016.07.005 · Cited by 217
A Spider's Fang: How to Design an Injection Needle Using Chitin‐Based Composite Material
Politi, Y., Priewasser, M., Pippel, E., Zaslansky, P., Hartmann, J., Siegel, S., Li, C., Barth, F. G., & Fratzl, P. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200063 · Cited by 213
3D Printing of Materials with Tunable Failure via Bioinspired Mechanical Gradients
Kokkinis, D., Bouville, F., & Studart, A. R. (2018) · Advanced Materials · doi:10.1002/adma.201705808 · Cited by 212
Ripley, B., Kelil, T., Cheezum, M. K., Goncalves, A., Di Carli, M. F., Rybicki, F. J., Steigner, M., Mitsouras, D., & Blankstein, R. (2016) · Journal of Cardiovascular Computed Tomography · doi:10.1016/j.jcct.2015.12.004 · Cited by 205
CT image segmentation methods for bone used in medical additive manufacturing
van Eijnatten, M., van Dijk, R., Dobbe, J., Streekstra, G., Koivisto, J., & Wolff, J. (2018) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2017.10.008 · Cited by 195
Three-Dimensional Printing Fiber Reinforced Hydrogel Composites
Bakarich, S. E., Gorkin, R., in het Panhuis, M., & Spinks, G. M. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am503878d · Cited by 192
Additively manufactured functionally graded biodegradable porous iron
Li, Y., Jahr, H., Pavanram, P., Bobbert, F. S. L., Puggi, U., Zhang, X.-Y., Pouran, B., Leeflang, M. A., Weinans, H., Zhou, J., et al. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.07.013 · Cited by 189
Self-citationMiao, S., Zhu, W., Castro, N. J., Leng, J., & Zhang, L. G. (2016) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2015.0542 · Cited by 187
Additive manufacturing high performance graphene-based composites: A review
Li, Y., Feng, Z., Huang, L., Essa, K., Bilotti, E., Zhang, H., Peijs, T., & Hao, L. (2019) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.105483 · Cited by 185
Self-citationStructure, composition, and mechanical properties of shark teeth
Enax, J., Prymak, O., Raabe, D., & Epple, M. (2012) · Journal of Structural Biology · doi:10.1016/j.jsb.2012.03.012 · Cited by 182
Effect of microstructure on the mechanical properties of Haversian cortical bone
Hoc, T., Henry, L., Verdier, M., Aubry, D., Sedel, L., & Meunier, A. (2006) · Bone · doi:10.1016/j.bone.2005.09.017 · Cited by 173
Weißmann, V., Bader, R., Hansmann, H., & Laufer, N. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.095 · Cited by 170
Shanmugam, G., & Wang, Y. (2015) · Journal of Palaeogeography · doi:10.3724/sp.j.1261.2015.00071 · Cited by 168
Self-citationKumar, S. S., Reddy, K. V. V. S. M., Kumar, A., & Devi, G. R. (2012) · Aerospace Science and Technology · doi:10.1016/j.ast.2012.04.002 · Cited by 167
Biologically Inspired Dynamic Material Systems
Studart, A. R. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410139 · Cited by 167
Zhang, X.-Y., Fang, G., Xing, L.-L., Liu, W., & Zhou, J. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.07.064 · Cited by 162
Tan, C., Li, S., Essa, K., Jamshidi, P., Zhou, K., Ma, W., & Attallah, M. M. (2019) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2019.04.002 · Cited by 162
Self-citationHeterogeneous object modeling: A review
Kou, X. Y., & Tan, S. T. (2007) · Computer-Aided Design · doi:10.1016/j.cad.2006.12.007 · Cited by 159
Strategies for Zonal Cartilage Repair using Hydrogels
Klein, T. J., Rizzi, S. C., Reichert, J. C., Georgi, N., Malda, J., Schuurman, W., Crawford, R., & Hutmacher, D. W. (2009) · Macromolecular Bioscience · doi:10.1002/mabi.200900176 · Cited by 154
A topological derivative method for topology optimization
Norato, J. A., Bendsøe, M. P., Haber, R. B., & Tortorelli, D. A. (2007) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-007-0094-6 · Cited by 147
Minnema, J., van Eijnatten, M. A. J. M., Kouw, W. M., Diblen, F., Mendrik, A. M., & Wolff, J. (2018) · Computers in Biology and Medicine · doi:10.1016/j.compbiomed.2018.10.012 · Cited by 145
Mahbod, M., & Asgari, M. (2019) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2019.02.041 · Cited by 139
CT Angiography: Current Technology and Clinical Use
Kumamaru, K. K., Hoppel, B. E., Mather, R. T., & Rybicki, F. J. (2010) · Radiologic Clinics of North America · doi:10.1016/j.rcl.2010.02.006 · Cited by 137
The design of additively manufactured lattices to increase the functionality of medical implants
Burton, H. E., Eisenstein, N., Lawless, B. M., Jamshidi, P., Aristizabal, M., Addison, O., Shepherd, D. E. T., Attallah, M. M., Grover, L. M., & Cox, S. C. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.10.052 · Cited by 136
Functionally Graded Alloys Obtained by Additive Manufacturing
Niendorf, T., Leuders, S., Riemer, A., Brenne, F., Tröster, T., Richard, H. A., & Schwarze, D. (2014) · Advanced Engineering Materials · doi:10.1002/adem.201300579 · Cited by 135
Bobbio, L. D., Bocklund, B. J., Otis, R., Borgonia, J. P., Dillon, R. P., Shapiro, A. A., McEnerney, B. W., Liu, Z., & Beese, A. M. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.01.156 · Cited by 135
Zuback, J. S., Palmer, T. A., & DebRoy, T. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.08.197 · Cited by 135
Popova, E., Rodgers, T. M., Gong, X., Cecen, A., Madison, J. D., & Kalidindi, S. R. (2017) · Integrating materials and manufacturing innovation · doi:10.1007/s40192-017-0088-1 · Cited by 134
Tan, X., Kok, Y., Tan, Y. J., Vastola, G., Pei, Q., Zhang, G., Zhang, Y., Tor, S. B., Leong, K. F., & Chua, C. K. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.05.178 · Cited by 133
Implicit slicing for functionally tailored additive manufacturing
Steuben, J. C., Iliopoulos, A., & Michopoulos, J. G. (2016) · Computer-Aided Design · doi:10.1016/j.cad.2016.04.003 · Cited by 123
Design for 4D printing: A voxel-based modeling and simulation of smart materials
Sossou, G., Demoly, F., Belkebir, H., Qi, H. J., Gomes, S., & Montavon, G. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107798 · Cited by 123
Mosanenzadeh, S. G., Naguib, H. E., Park, C. B., & Atalla, N. (2014) · Journal of Materials Science · doi:10.1007/s10853-014-8681-6 · Cited by 115
3D‐Printing of Functionally Graded Porous Materials Using On‐Demand Reconfigurable Microfluidics
Costantini, M., Jaroszewicz, J., Kozoń, Ł., Szlązak, K., Święszkowski, W., Garstecki, P., Stubenrauch, C., Barbetta, A., & Guzowski, J. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201900530 · Cited by 111
Digital design and nonlinear simulation for additive manufacturing of soft lattice structures
Weeger, O., Boddeti, N., Yeung, S.-K., Kaijima, S., & Dunn, M. L. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.11.003 · Cited by 106
Scheithauer, U., Weingarten, S., Johne, R., Schwarzer, E., Abel, J., Richter, H., Moritz, T., & Michaelis, A. (2017) · Materials · doi:10.3390/ma10121368 · Cited by 100
Yin, L., Doyhamboure--Fouquet, J., Tian, X., & Li, D. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.09.003 · Cited by 98
Multiscale structural gradients enhance the biomechanical functionality of the spider fang
Bar‐On, B., Barth, F. G., Fratzl, P., & Politi, Y. (2014) · Nature Communications · doi:10.1038/ncomms4894 · Cited by 96
3D printing of tough hydrogel composites with spatially varying materials properties
Bakarich, S. E., Gorkin, R. A., III, Gately, R. D., Naficy, S., Panhuis, M. I. H., & Spinks, G. M. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.12.003 · Cited by 96
4D printing – revolution or fad?
Pei, E. (2014) · Assembly Automation · doi:10.1108/aa-02-2014-014 · Cited by 89
Mogas‐Soldevila, L., Duro‐Royo, J., & Oxman, N. (2014) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2014.0014 · Cited by 83
Essa, K., Hassanin, H. S., Attallah, M. M., Adkins, N. J. E., Musker, A. J., Roberts, G. T., Tenev, N., & Smith, M. L. (2017) · Applied Catalysis A General · doi:10.1016/j.apcata.2017.05.019 · Cited by 80
Self-citationLaser additive processing of a functionally graded internal fracture fixation plate
de Lima, D. D., Mantri, S. A., Mikler, C. V., Contieri, R. J., Yannetta, C. J., Campo, K. N., Lopes, É. S. N., Styles, M. J., Borkar, T., Caram, R., et al. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.05.034 · Cited by 78
Maruyama, M., Nabeshima, A., Pan, C., Behn, A. W., Thio, T., Lin, T., Pajarinen, J., Kawai, T., Takagi, M., Goodman, S. B., et al. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.09.030 · Cited by 77
An integrated CAD system for design of heterogeneous objects
Bhashyam, S., Shin, K.-H., & Dutta, D. (2000) · Rapid Prototyping Journal · doi:10.1108/13552540010323547 · Cited by 76
Singh, G., & Pandey, P. M. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.138035 · Cited by 76
Microstructure of TA2/TA15 graded structural material by laser additive manufacturing process
Ting-ting, Q. I. A. N., Liu, D., Tian, X., Chang-meng, L. I. U., & Wang, H. (2014) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(14)63404-x · Cited by 74
Kawai, T., Shanjani, Y., Fazeli, S., Behn, A. W., Okuzu, Y., Goodman, S. B., & Yang, Y. (2017) · Journal of Orthopaedic Research® · doi:10.1002/jor.23673 · Cited by 67
3D printing of materials with spatially non-linearly varying properties
Ren, L., Song, Z., Liu, H., Han, Q., Zhao, C., Derby, B., Liu, Q., & Ren, L. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.07.012 · Cited by 66
Recent trends in shape forming from colloidal processing: A review
Tallón, C., & Franks, G. V. (2011) · Journal of the Ceramic Society of Japan · doi:10.2109/jcersj2.119.147 · Cited by 65
Vastola, G., Zhang, G., Pei, Q., et al. (2016) · JOM · doi:10.1007/s11837-016-1890-5 · Cited by 61
A study of 4D printing and functionally graded additive manufacturing
Pei, E., Loh, G. H., Harrison, D. J., Almeida, H. A., Monzón, M., & Paz, R. (2017) · Assembly Automation · doi:10.1108/aa-01-2017-012 · Cited by 60
Hazlehurst, K. B., Wang, C., & Stanford, M. (2014) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2014.02.008 · Cited by 59
Multiple material objects: from CAD representation to data format for rapid prototyping
Chiu, W. K., & Tan, S. T. (2000) · Computer-Aided Design · doi:10.1016/s0010-4485(00)00046-4 · Cited by 58
Takezawa, A., Koizumi, Y., & Kobashi, M. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.10.004 · Cited by 56
Jiao, D., Liu, Z., Qu, R. T., & Zhang, Z. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.11.003 · Cited by 55
Feng, Z., Li, Y., Xin, C., Tang, D., Xiong, W., & Zhang, H. (2019) · C – Journal of Carbon Research · doi:10.3390/c5020025 · Cited by 51
Self-citationJansen, M., & Piérard, O. (2020) · Computers & Structures · doi:10.1016/j.compstruc.2020.106205 · Cited by 48
Dual gradient direct ink writing for formation of kaolinite ceramic functionally graded materials
Tang, D., Hao, L., Li, Y., Li, Z., & Dadbakhsh, S. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.152275 · Cited by 47
Self-citationFunctionally graded materials from topology optimisation and stereolithography
Liu, T., Guessasma, S., Zhu, J., Zhang, W., & Belhabib, S. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.08.038 · Cited by 46
3D Printed Functionally Graded Plasmonic Constructs
Haring, A. P., Khan, A. U., Liu, G., & Johnson, B. N. (2017) · Advanced Optical Materials · doi:10.1002/adom.201700367 · Cited by 43
Yang, N., Hu, S., Ma, D., Lu, T., & Li, B. (2015) · Scientific Reports · doi:10.1038/srep14878 · Cited by 41
Moustafa, A. R., Durga, A., Lindwall, G., & Cordero, Z. C. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.101008 · Cited by 29
Additive manufacturing of graded dielectrics
Roper, D. A., Good, B. L., McCauley, R., et al. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/4/045029 · Cited by 24
Functional Gradients in Biological Composites
Studart, A. R., Libanori, R., & Erb, R. M. (2014) · Wiley eBooks · doi:10.1002/9783527675821.ch13 · Cited by 23
Kenel, C., Schloth, P., Petegem, S. V., et al. (2016) · JOM · doi:10.1007/s11837-015-1774-0 · Cited by 23
Zhang, Y., Kong, D., & Liu, S. (2018) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2018.08.004 · Cited by 22
Yang, N., Hu, S., Ma, D., et al. (2014) · arXiv (Cornell University) · doi:10.48550/arxiv.1409.2236 · Cited by 16
Cited by
Metal additive manufacturing in aerospace: A review
Blakey-Milner, B., Gradl, P., Snedden, G., Brooks, M., Pitot, J., Lopez, E., Leary, M., Berto, F., & du Plessis, A. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.110008 · Cited by 2,263
Polymer 3D Printing Review: Materials, Process, and Design Strategies for Medical Applications
Arefin, A. M. E., Khatri, N. R., Kulkarni, N., & Egan, P. F. (2021) · Polymers · doi:10.3390/polym13091499 · Cited by 361
Wei, C., & Li, L. (2021) · Virtual and Physical Prototyping · doi:10.1080/17452759.2021.1928520 · Cited by 316
A review of various materials for additive manufacturing: Recent trends and processing issues
Srivastava, M., Rathee, S., Patel, V., Kumar, A., & Koppad, P. G. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.10.015 · Cited by 311
Chen, S.-G., Gao, H.-J., Zhang, Y.-D., Wu, Q., Gao, Z.-H., & Zhou, X. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.02.054 · Cited by 274
Metadata
- Authors
- Li, Y., Feng, Z., Hao, L., Huang, L., Xin, C., Wang, Y., Bilotti, E., Essa, K., Zhang, H., Li, Z., Yan, F., & Peijs, T.
- Venue
- Advanced Materials Technologies
- Publisher
- Wiley
- Published
- 2020-04-29
- Volume
- 5
- Issue
- 6
- ISSN
- 2365-709X (ISSN-L)
- OpenAlex
- W3023525367
- Cited by
- 614
- References
- 129
- FWCI
- 20.38
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.