The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Additive Manufacturing: Applications and Directions in Photonics and Optoelectronics
Open accessAbstract
The combination of materials with targeted optical properties and of complex, 3D architectures, which can be nowadays obtained by additive manufacturing, opens unprecedented opportunities for developing new integrated systems in photonics and optoelectronics. The recent progress in additive technologies for processing optical materials is here presented, with emphasis on accessible geometries, achievable spatial resolution, and requirements for printable optical materials. Relevant examples of photonic and optoelectronic devices fabricated by 3D printing are shown, which include light‐emitting diodes, lasers, waveguides, optical sensors, photonic crystals and metamaterials, and micro‐optical components. The potential of additive manufacturing applied to photonics and optoelectronics is enormous, and the field is still in its infancy. Future directions for research include the development of fully printable optical and architected materials, of effective and versatile platforms for multimaterial processing, and of high‐throughput 3D printing technologies that can concomitantly reach high resolution and large working volumes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Negative Refraction Makes a Perfect Lens
Pendry, J. B. (2000) · Physical Review Letters · doi:10.1103/physrevlett.85.3966 · Cited by 12,159
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Finer features for functional microdevices
Kawata, S., Sun, H.-B., Tanaka, T., & Takada, K. (2001) · Nature · doi:10.1038/35089130 · Cited by 2,871
Three-dimensional microfabrication with two-photon-absorbed photopolymerization
Maruo, S., Nakamura, O., & Kawata, S. (1997) · Optics Letters · doi:10.1364/ol.22.000132 · Cited by 1,952
3D printed microfluidic devices: enablers and barriers
Waheed, S., Cabot, J. M., Macdonald, N. P., Lewis, T., Guijt, R. M., Paull, B., & Breadmore, M. C. (2016) · Lab on a Chip · doi:10.1039/c6lc00284f · Cited by 1,039
Wearable smart sensor systems integrated on soft contact lenses for wireless ocular diagnostics
Kim, J., Kim, M., Lee, M.-S., Kim, K., Ji, S., Kim, Y.-T., Park, J., Na, K., Bae, K.-H., Kyun Kim, H., et al. (2017) · Nature Communications · doi:10.1038/ncomms14997 · Cited by 951
Active materials by four-dimension printing
Ge, Q., Qi, H. J., & Dunn, M. L. (2013) · Applied Physics Letters · doi:10.1063/1.4819837 · Cited by 785
Integrated multimode interferometers with arbitrary designs for photonic boson sampling
Crespi, A., Osellame, R., Ramponi, R., Brod, D. J., Galvão, E. F., Spagnolo, N., Vitelli, C., Maiorino, E., Mataloni, P., & Sciarrino, F. (2013) · Nature Photonics · doi:10.1038/nphoton.2013.112 · Cited by 662
Kim, R.-H., Kim, D.-H., Xiao, J., Kim, B. H., Park, S.-I., Panilaitis, B., Ghaffari, R., Yao, J., Li, M., Liu, Z., et al. (2010) · Nature Materials · doi:10.1038/nmat2879 · Cited by 637
An elasto-mechanical unfeelability cloak made of pentamode metamaterials
Bückmann, T., Thiel, M., Kadic, M., Schittny, R., & Wegener, M. (2014) · Nature Communications · doi:10.1038/ncomms5130 · Cited by 623
Cited by
Material-structure-performance integrated laser-metal additive manufacturing
Gu, D., Shi, X., Poprawe, R., Bourell, D. L., Setchi, R., & Zhu, J. (2021) · Science · doi:10.1126/science.abg1487 · Cited by 1,703
Additive manufacturing of metamaterials: A review
Askari, M., Hutchins, D. A., Thomas, P. J., Astolfi, L., Watson, R. L., Abdi, M., Ricci, M., Laureti, S., Nie, L., Freear, S., et al. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101562 · Cited by 470
Wang, H., Zhang, W., Ladika, D., Yu, H., Gailevičius, D., Wang, H., Pan, C., Nair, P. N. S., Ke, Y., Mori, T., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202214211 · Cited by 401
Self-citationPrintable Smart Materials and Devices: Strategies and Applications
Su, M., & Song, Y. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00303 · Cited by 312
3D-printed silica with nanoscale resolution
Wen, X., Zhang, B., Wang, W., Ye, F., Yue, S., Guo, H., Gao, G., Zhao, Y., Fang, Q., Nguyen, C., et al. (2021) · Nature Materials · doi:10.1038/s41563-021-01111-2 · Cited by 259
Metadata
- Authors
- Camposeo, A., Persano, L., Farsari, M., & Pisignano, D.
- Venue
- Advanced Optical Materials
- Publisher
- Wiley
- Published
- 2018-09-16
- Volume
- 7
- Issue
- 1
- Pages
- 1800419-1800419
- ISSN
- 2195-1071 (ISSN-L)
- OpenAlex
- W2889830791
- Cited by
- 227
- References
- 10
- FWCI
- 9.72
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Additive Manufacturing: Applications and Directions in Photonics and Optoelectronics. https://app.cochat.ai/papers/10.1002/adom.201800419
- The paper
- Camposeo, A., Persano, L., Farsari, M., & Pisignano, D. (2019). Additive Manufacturing: Applications and Directions in Photonics and Optoelectronics. Advanced Optical Materials. https://doi.org/10.1002/adom.201800419
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.