The DOI matches its Crossref record; 110 of the 110 references it cites were found in a registry or an index.
3D Printing of Multilayered and Multimaterial Electronics: A Review
Abstract
3D printing, also known as additive manufacturing, is a manufacturing process in which the materials are deposited layer by layer in an additive manner. With the advancement in materials and manufacturing technology, 3D printing has found its applications in the field of electronics manufacturing. Initially, 3D printing is used for the fabrication of electronic components with single material designs such as resistors, inductors, circuits, antennas, strain gauges, etc. Recently, there are many works involving the use of 3D printing fabrication techniques for advanced electronic components and devices such as parallel plate capacitors, inductors, organic light‐emitting diodes, photovoltaics, transistors, displays, etc. which involve multilayer multimaterial printing. Despite these many works, there has been no review on the design and fabrication consideration for the 3D printing of multilayered and multimaterial (MLMM) electronics. As such, this review aims to summarize the current landscape of 3D printing of MLMM electronics and provide some insights on the design consideration, fabrication strategies, and challenges of 3D printing of MLMM electronics. In particular, the focus will be placed on discussing the interface conditions between different materials such as surface wettability, surface roughness, material compatibility, and the considerations for postprocessing treatments.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
ASME International Mechanical Engineering Congress and Exposition
(2001) · The Journal of the Acoustical Society of America · doi:10.1121/1.4776777 · Cited by 2,619
Derby, B. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104502 · Cited by 1,984
Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review
Khan, S., Lorenzelli, L., & Dahiya, R. S. (2015) · IEEE Sensors Journal · doi:10.1109/jsen.2014.2375203 · Cited by 1,225
Inkjet-Printed Graphene Electronics
Torrisi, F., Hasan, T., Wu, W., Sun, Z., Lombardo, A., Kulmala, T. S., Hsieh, G.-W., Jung, S., Bonaccorso, F., Paul, P. J., et al. (2012) · ACS Nano · doi:10.1021/nn2044609 · Cited by 1,195
Inkjet-Printed Line Morphologies and Temperature Control of the Coffee Ring Effect
Soltman, D., & Subramanian, V. (2008) · Langmuir · doi:10.1021/la7026847 · Cited by 1,152
A New Frontier of Printed Electronics: Flexible Hybrid Electronics
Khan, Y., Thielens, A., Muin, S., Ting, J., Baumbauer, C., & Arias, A. C. (2020) · Advanced Materials · doi:10.1002/adma.201905279 · Cited by 891
Ko, S. H., Pan, H., Grigoropoulos, C. P., Luscombe, C. K., Fréchet, J. M. J., & Poulikakos, D. (2007) · Nanotechnology · doi:10.1088/0957-4484/18/34/345202 · Cited by 770
Graphene Oxide‐Based Electrode Inks for 3D‐Printed Lithium‐Ion Batteries
Fu, K., Wang, Y., Yan, C., Yao, Y., Chen, Y., Dai, J., Lacey, S., Wang, Y., Wan, J., Li, T., et al. (2016) · Advanced Materials · doi:10.1002/adma.201505391 · Cited by 758
Influence of Fluid Physical Properties on Ink-Jet Printability
Jang, D., Kim, D., & Moon, J. (2009) · Langmuir · doi:10.1021/la900059m · Cited by 745
Hybrid 3D Printing of Soft Electronics
Valentine, A. D., Busbee, T. A., Boley, J. W., Raney, J. R., Chortos, A., Kotikian, A., Berrigan, J. D., Durstock, M. F., & Lewis, J. A. (2017) · Advanced Materials · doi:10.1002/adma.201703817 · Cited by 688
Krebs, F. C., Fyenbo, J., & Jørgensen, M. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm01178a · Cited by 635
Conformal Printing of Electrically Small Antennas on Three‐Dimensional Surfaces
Adams, J. J., Duoss, E. B., Malkowski, T. F., Motala, M. J., Ahn, B. Y., Nuzzo, R. G., Bernhard, J. T., & Lewis, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201003734 · Cited by 630
3D Printing multifunctionality: structures with electronics
Espalin, D., Muse, D. W., MacDonald, E., & Wicker, R. B. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-5717-7 · Cited by 614
A wireless body area sensor network based on stretchable passive tags
Niu, S., Matsuhisa, N., Beker, L., Li, J., Wang, S., Wang, J., Jiang, Y., Yan, X., Yun, Y., Burnett, W., et al. (2019) · Nature Electronics · doi:10.1038/s41928-019-0286-2 · Cited by 601
Functional inks and printing of two-dimensional materials
Hu, G., Kang, J., Ng, L. W. T., Zhu, X., Howe, R. C. T., Jones, C. G., Hersam, M. C., & Hasan, T. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00084k · Cited by 569
Inorganic nanomaterials for printed electronics: a review
Wu, W. (2017) · Nanoscale · doi:10.1039/c7nr01604b · Cited by 522
Progress Toward Development of All-Printed RFID Tags: Materials, Processes, and Devices
Subramanian, V., Frechet, J. M. J., Chang, P. C., Huang, D. C., Lee, J. B., Molesa, S. E., Murphy, A. R., Redinger, D. R., & Volkman, S. K. (2005) · Proceedings of the IEEE · doi:10.1109/jproc.2005.850305 · Cited by 507
Learning from “Coffee Rings”: Ordered Structures Enabled by Controlled Evaporative Self‐Assembly
Han, W., & Lin, Z. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201104454 · Cited by 475
3D Printing of Freestanding MXene Architectures for Current‐Collector‐Free Supercapacitors
Yang, W., Yang, J., Byun, J. J., Moissinac, F. P., Xu, J., Haigh, S. J., Domingos, M., Bissett, M. A., Dryfe, R. A. W., & Barg, S. (2019) · Advanced Materials · doi:10.1002/adma.201902725 · Cited by 460
Use of nanocellulose in printed electronics: a review
Hoeng, F., Denneulin, A., & Bras, J. (2016) · Nanoscale · doi:10.1039/c6nr03054h · Cited by 459
Advanced Materials for Printed Wearable Electrochemical Devices: A Review
Kim, J., Kumar, R., Bandodkar, A. J., & Wang, J. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201600260 · Cited by 452
3D Printed Stretchable Tactile Sensors
Guo, S., Qiu, K., Meng, F., Park, S. H., & McAlpine, M. C. (2017) · Advanced Materials · doi:10.1002/adma.201701218 · Cited by 445
Orangi, J., Hamade, F., Davis, V. A., & Beidaghi, M. (2020) · ACS Nano · doi:10.1021/acsnano.9b07325 · Cited by 443
Carey, T., Cacovich, S., Divitini, G., Ren, J., Mansouri, A., Kim, J. M., Wang, C., Ducati, C., Sordan, R., & Torrisi, F. (2017) · Nature Communications · doi:10.1038/s41467-017-01210-2 · Cited by 433
3D Printed Quantum Dot Light-Emitting Diodes
Kong, Y. L., Tamargo, I. A., Kim, H., Johnson, B. N., Gupta, M. K., Koh, T.-W., Chin, H.-A., Steingart, D. A., Rand, B. P., & McAlpine, M. C. (2014) · Nano Letters · doi:10.1021/nl5033292 · Cited by 432
Metal-based Inkjet Inks for Printed Electronics
Kamyshny, A. (2011) · The Open Applied Physics Journal · doi:10.2174/1874183501104010019 · Cited by 424
Reese, C., Roberts, M., Ling, M.-M., & Bao, Z. (2004) · Materials Today · doi:10.1016/s1369-7021(04)00398-0 · Cited by 413
Joe Lopes, A., MacDonald, E., & Wicker, R. B. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211212113 · Cited by 399
Gravure Printing of Graphene for Large‐area Flexible Electronics
Secor, E. B., Lim, S., Zhang, H., Frisbie, C. D., Francis, L. F., & Hersam, M. C. (2014) · Advanced Materials · doi:10.1002/adma.201401052 · Cited by 358
Self-citationLe Harzic, R., Huot, N., Audouard, E., Jonin, C., Laporte, P., Valette, S., Fraczkiewicz, A., & Fortunier, R. (2002) · Applied Physics Letters · doi:10.1063/1.1481195 · Cited by 345
Screen-Printing of a Highly Conductive Graphene Ink for Flexible Printed Electronics
He, P., Cao, J., Ding, H., Liu, C., Neilson, J., Li, Z., Kinloch, I. A., & Derby, B. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b04589 · Cited by 340
Direct Ink Writing Based 4D Printing of Materials and Their Applications
Wan, X., Luo, L., Liu, Y., & Leng, J. (2020) · Advanced Science · doi:10.1002/advs.202001000 · Cited by 337
Scalable Fabrication and Integration of Graphene Microsupercapacitors through Full Inkjet Printing
Li, J., Sollami Delekta, S., Zhang, P., Yang, S., Lohe, M. R., Zhuang, X., Feng, X., & Östling, M. (2017) · ACS Nano · doi:10.1021/acsnano.7b03354 · Cited by 334
3D printing electronic components and circuits with conductive thermoplastic filament
Flowers, P. F., Reyes, C., Ye, S., Kim, M. J., & Wiley, B. J. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.10.002 · Cited by 333
Resonant-enhanced full-color emission of quantum-dot-based micro LED display technology
Han, H.-V., Lin, H.-Y., Lin, C.-C., Chong, W.-C., Li, J.-R., Chen, K.-J., Yu, P., Chen, T.-M., Chen, H.-M., Lau, K.-M., et al. (2015) · Optics Express · doi:10.1364/oe.23.032504 · Cited by 330
Thermal degradation mechanisms of PEDOT:PSS
VITORATOS, E., SAKKOPOULOS, S., DALAS, E., PALIATSAS, N., KARAGEORGOPOULOS, D., PETRAKI, F., KENNOU, S., & CHOULIS, S. (2009) · Organic Electronics · doi:10.1016/j.orgel.2008.10.008 · Cited by 321
Fukuda, K., & Someya, T. (2017) · Advanced Materials · doi:10.1002/adma.201602736 · Cited by 317
Sekitani, T., Takamiya, M., Noguchi, Y., Nakano, S., Kato, Y., Sakurai, T., & Someya, T. (2007) · Nature Materials · doi:10.1038/nmat1903 · Cited by 306
Luo, S., Hoang, P. T., & Liu, T. (2016) · Carbon · doi:10.1016/j.carbon.2015.09.076 · Cited by 295
3D printing for electroanalysis: From multiuse electrochemical cells to sensors
Cardoso, R. M., Mendonça, D. M. H., Silva, W. P., Silva, M. N. T., Nossol, E., da Silva, R. A. B., Richter, E. M., & Muñoz, R. A. A. (2018) · Analytica Chimica Acta · doi:10.1016/j.aca.2018.06.021 · Cited by 294
Three-dimensional monolithic integration in flexible printed organic transistors
Kwon, J., Takeda, Y., Shiwaku, R., Tokito, S., Cho, K., & Jung, S. (2018) · Nature Communications · doi:10.1038/s41467-018-07904-5 · Cited by 285
Inkjet Printing of Silver Nanowire Networks
Finn, D. J., Lotya, M., & Coleman, J. N. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01875 · Cited by 279
3D Printed Sensors for Biomedical Applications: A Review
Han, T., Kundu, S., Nag, A., & Xu, Y. (2019) · Sensors · doi:10.3390/s19071706 · Cited by 266
Nanomaterial Patterning in 3D Printing
Elder, B., Neupane, R., Tokita, E., Ghosh, U., Hales, S., & Kong, Y. L. (2020) · Advanced Materials · doi:10.1002/adma.201907142 · Cited by 265
Chua, C. K., & Leong, K. F. (2014) · WORLD SCIENTIFIC eBooks · doi:10.1142/9008 · Cited by 261
Three-dimensional printed electronics
Lewis, J. A., & Ahn, B. Y. (2015) · Nature · doi:10.1038/518042a · Cited by 249
Recent Advances in Controlling the Depositing Morphologies of Inkjet Droplets
Sun, J., Bao, B., He, M., Zhou, H., & Song, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b07006 · Cited by 249
Assembly and applications of 3D conformal electronics on curvilinear surfaces
Huang, Y., Wu, H., Xiao, L., Duan, Y., Zhu, H., Bian, J., Ye, D., & Yin, Z. (2019) · Materials Horizons · doi:10.1039/c8mh01450g · Cited by 230
Cao, X., Lau, C., Liu, Y., Wu, F., Gui, H., Liu, Q., Ma, Y., Wan, H., Amer, M. R., & Zhou, C. (2016) · ACS Nano · doi:10.1021/acsnano.6b05368 · Cited by 228
Grau, G., Cen, J., Kang, H., Kitsomboonloha, R., Scheideler, W. J., & Subramanian, V. (2016) · Flexible and Printed Electronics · doi:10.1088/2058-8585/1/2/023002 · Cited by 226
Large Area Electronics Using Printing Methods
Parashkov, R., Becker, E., Riedl, T., Johannes, H.-H., & Kowalsky, W. (2005) · Proceedings of the IEEE · doi:10.1109/jproc.2005.850304 · Cited by 224
Chen, P., Fu, Y., Aminirad, R., Wang, C., Zhang, J., Wang, K., Galatsis, K., & Zhou, C. (2011) · Nano Letters · doi:10.1021/nl202765b · Cited by 197
A review: additive manufacturing for active electronic components
Saengchairat, N., Tran, T. A., & Chua, C. K. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1253181 · Cited by 195
Agarwala, S., Goh, G. L., Dinh Le, T.-S., An, J., Peh, Z. K., Yeong, W. Y., & Kim, Y.-J. (2019) · ACS Sensors · doi:10.1021/acssensors.8b01293 · Cited by 186
Self-citationMousavi, S., Howard, D., Zhang, F., Leng, J., & Wang, C. H. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b21816 · Cited by 184
A review of printed passive electronic components through fully additive manufacturing methods
Tan, H., Tran, T. A., & Chua, C. K. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1217586 · Cited by 175
Recent Progress of Direct Ink Writing of Electronic Components for Advanced Wearable Devices
Zhang, Y., Shi, G., Qin, J., Lowe, S. E., Zhang, S., Zhao, H., & Zhong, Y. L. (2019) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.9b00428 · Cited by 175
Shi, G., Lowe, S. E., Teo, A. J. T., Dinh, T. K., Tan, S. H., Qin, J., Zhang, Y., Zhong, Y. L., & Zhao, H. (2019) · Applied Materials Today · doi:10.1016/j.apmt.2019.06.016 · Cited by 170
A flexible high potential printed battery for powering printed electronics
Gaikwad, A. M., Steingart, D. A., Nga Ng, T., Schwartz, D. E., & Whiting, G. L. (2013) · Applied Physics Letters · doi:10.1063/1.4810974 · Cited by 167
Capacitive-type humidity sensors fabricated using the offset lithographic printing process
Harrey, P. M., Ramsey, B. J., Evans, P. S. A., & Harrison, D. J. (2002) · Sensors and Actuators B Chemical · doi:10.1016/s0925-4005(02)00240-x · Cited by 166
Jayanth, N., Senthil, P., & Prakash, C. (2018) · Virtual and Physical Prototyping · doi:10.1080/17452759.2018.1449565 · Cited by 158
Directed and On‐Demand Alignment of Carbon Nanotube: A Review toward 3D Printing of Electronics
Goh, G. L., Agarwala, S., & Yeong, W. Y. (2019) · Advanced Materials Interfaces · doi:10.1002/admi.201801318 · Cited by 155
Self-citationPrinting Technologies on Flexible Substrates for Printed Electronics
Cruz, S. M., Rocha, L. A., & Viana, J. C. (2018) · InTech eBooks · doi:10.5772/intechopen.76161 · Cited by 153
Wettability of Photoresponsive Titanium Dioxide Surfaces
Stevens, N., Priest, C., Sedev, R. V., et al. (2003) · Langmuir · doi:10.1021/la020660c · Cited by 151
Graphene for energy harvesting/storage devices and printed electronics
Grande, L., Chundi, V. T., Wei, D., Bower, C., Andrew, P., & Ryhänen, T. (2012) · Particuology · doi:10.1016/j.partic.2011.12.001 · Cited by 149
Direct Ink Writing of Materials for Electronics-Related Applications: A Mini Review
Hou, Z., Lu, H., Li, Y., Yang, L., & Gao, Y. (2021) · Frontiers in Materials · doi:10.3389/fmats.2021.647229 · Cited by 148
Patterning of micro-scale conductive networks using reel-to-reel flexographic printing
Deganello, D., Cherry, J. A., Gethin, D. T., & Claypole, T. C. (2010) · Thin Solid Films · doi:10.1016/j.tsf.2010.05.125 · Cited by 140
Design and characterization of a low thermal drift capacitive humidity sensor by inkjet-printing
Rivadeneyra, A., Fernández-Salmerón, J., Agudo, M., López-Villanueva, J. A., Capitan-Vallvey, L. F., & Palma, A. J. (2014) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2013.12.117 · Cited by 137
Polylactic acid as a biodegradable material for all-solution-processed organic electronic devices
Mattana, G., Briand, D., Marette, A., Quintero, A. V., & de Rooij, N. F. (2014) · Organic Electronics · doi:10.1016/j.orgel.2014.11.010 · Cited by 137
Kim, S. H., Hong, K., Lee, K. H., & Frisbie, C. D. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am401200y · Cited by 137
Inkjet Printed, High Mobility Inorganic-Oxide Field Effect Transistors Processed at Room Temperature
Dasgupta, S., Kruk, R., Mechau, N., & Hahn, H. (2011) · ACS Nano · doi:10.1021/nn202992v · Cited by 131
Etching polyimide with a nonequilibrium atmospheric-pressure plasma jet
Jeong, J., Babayan, S. E., Schütze, A., Tu, V. J., Park, J., Henins, I., Selwyn, G. S., & Hicks, R. F. (1999) · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · doi:10.1116/1.581999 · Cited by 125
Screen printed passive components for flexible power electronics
Ostfeld, A. E., Deckman, I., Gaikwad, A. M., Lochner, C. M., & Arias, A. C. (2015) · Scientific Reports · doi:10.1038/srep15959 · Cited by 119
Li, C., & Liao, Y. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b02844 · Cited by 118
Agarwala, S., Lim, Z. H., Nicholson, E., & Ho, G. W. (2011) · Nanoscale · doi:10.1039/c1nr10856e · Cited by 116
Predictive Modeling of Droplet Formation Processes in Inkjet-Based Bioprinting
Wu, D., & Xu, C. (2018) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4040619 · Cited by 101
Metal−Organic Decomposition Ink for Printed Electronics
Choi, Y., Seong, K., & Piao, Y. (2019) · Advanced Materials Interfaces · doi:10.1002/admi.201901002 · Cited by 101
Goh, G. L., Agarwala, S., Tan, Y. J., & Yeong, W. Y. (2017) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2017.12.127 · Cited by 97
Self-citationDirect, Mask‐ and Solvent‐Free Printing of Molecular Organic Semiconductors
Shtein, M., Peumans, P., Benziger, J. B., & Forrest, S. R. (2004) · Advanced Materials · doi:10.1002/adma.200400260 · Cited by 94
3D Printed Electronics of Non-contact Ink Writing Techniques: Status and Promise
Zhang, H., Moon, S. K., & Ngo, T. H. (2019) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-019-00139-9 · Cited by 94
Self-citationJang, Y., Joo, S.-J., Chu, J.-H., Uhm, H.-J., Park, J.-W., Ryu, C.-H., Yu, M.-H., & Kim, H.-S. (2020) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-020-00193-8 · Cited by 94
Complementary Ring Oscillator Exclusively Prepared by Means of Gravure and Flexographic Printing
Kempa, H., Hambsch, M., Reuter, K., Stanel, M., Schmidt, G. C., Meier, B., & Hübler, A. C. (2011) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2011.2153856 · Cited by 87
Correia, V. M. G., Mitra, K. Y., de Castro, H. S. C., Rocha, J. G., Sowade, E., Baumann, R. R., & Lanceros-Méndez, S. (2017) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2017.11.016 · Cited by 87
Zhao, F., Li, D., & Jin, Z. M. (2018) · Materials · doi:10.3390/ma11020288 · Cited by 86
Mikkonen, R., Puistola, P., Jönkkäri, I., & Mäntysalo, M. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b19632 · Cited by 86
3D Inkjet Printing of Electronics Using UV Conversion
Saleh, E., Zhang, F., He, Y., Vaithilingam, J., Fernandez, J. L., Wildman, R. D., Ashcroft, I., Hague, R., Dickens, P., & Tuck, C. J. (2017) · Advanced Materials Technologies · doi:10.1002/admt.201700134 · Cited by 85
Giannakou, P., Masteghin, M. G., Slade, R. C. T., Hinder, S. J., & Shkunov, M. N. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta07878a · Cited by 85
Crystallinity dynamics of gold nanoparticles during sintering or coalescence
Goudeli, E., & Pratsinis, S. E. (2015) · AIChE Journal · doi:10.1002/aic.15125 · Cited by 79
Zanini, S., Barni, R., Pergola, R. D., & ̃Riccardi, C. (2014) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/47/32/325202 · Cited by 78
Printed Capacitive Based Humidity Sensors on Flexible Substrates
Reddy, A. S. G., Narakathu, B. B., Atashbar, M. Z., Rebros, M., Rebrosova, E., Bazuin, B. J., Joyce, M., Fleming, P. D., & Pekarovičová, A. (2011) · Sensor Letters · doi:10.1166/sl.2011.1633 · Cited by 78
Conformal additive manufacturing using a direct-print process
Alkadi, F., Lee, K.-C., Bashiri, A. H., & Choi, J. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100975 · Cited by 77
Roach, D. J., Roberts, C. C., Wong, J., Kuang, X., Kovitz, J. M., Zhang, Q., Spence, T. G., & Qi, H. J. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101544 · Cited by 77
Delekta, S. S., Adolfsson, K. H., Erdal, N. B., Hakkarainen, M., Östling, M., & Li, J. (2019) · Nanoscale · doi:10.1039/c9nr01427f · Cited by 71
Inkjet printed System-in-Package design and manufacturing
Miettinen, J., Pekkanen, V., Kaija, K., Mansikkamäki, P., Mäntysalo, J., Mäntysalo, M., Niittynen, J., Pekkanen, J., Saviauk, T., & Rönkkä, R. (2008) · Microelectronics Journal · doi:10.1016/j.mejo.2008.02.014 · Cited by 69
The properties of copper films deposited on polyimide by nitrogen and oxygen plasma pre-treatment
Yang, C.-H., Lee, S.-C., Wu, J., et al. (2005) · Applied Surface Science · doi:10.1016/j.apsusc.2005.03.182 · Cited by 66
Surface analysis of polymeric substrates used for inkjet printing technology
Pietriková, A., Lukács, P., Jakubéczyová, D., Ballóková, B., Potencki, J., Tomaszewski, G., Pekárek, J., Přikrylová, K., & Fides, M. (2016) · Circuit World · doi:10.1108/cw-10-2015-0047 · Cited by 66
Elimination of the Coffee-Ring Effect by Promoting Particle Adsorption and Long-Range Interaction
Crivoi, A., & Duan, F. (2013) · Langmuir · doi:10.1021/la402544x · Cited by 62
Atreya, M., Dikshit, K. V., Marinick, G., Nielson, J., Bruns, C. J., & Whiting, G. L. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c05196 · Cited by 58
Zimmermann, J., Schlisske, S., Held, M., Tisserant, J., Porcarelli, L., Sanchez‐Sanchez, A., Mecerreyes, D., & Hernandez‐Sosa, G. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800641 · Cited by 57
Sol-gel based TiO2 paste applied in screen-printed dye-sensitized solar cells and modules
Hočevar, M., Krašovec, U. O., Bokalič, M., Topič, M., Veurman, W., Brandt, H., & Hinsch, A. (2013) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2012.12.046 · Cited by 41
Making fully printed perovskite solar cells stable outdoor with inorganic superhydrophobic coating
Luo, J., Yang, H., Zhuang, M., Liu, S., Wang, L., & Liu, B. (2020) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2020.03.082 · Cited by 38
Fully printed flexible carbon nanotube photodetectors
Zhang, S., Cai, L., Wang, T., Miao, J., Sepúlveda, N., & Wang, C. (2017) · Applied Physics Letters · doi:10.1063/1.4978935 · Cited by 36
Dynamics of Liquid Transfer from Nanoporous Stamps in High-Resolution Flexographic Printing
Mariappan, D. D., Kim, S., Boutilier, M. S. H., Zhao, J., Zhao, H., Beroz, J., Muecke, U. P., Sojoudi, H., Gleason, K. K., Brun, P. ‐., et al. (2019) · Langmuir · doi:10.1021/acs.langmuir.9b00460 · Cited by 26
Kondo, T., Watanabe, R., Shimoyama, Y., Shinohe, K., Kulinich, S. A., & Iwamori, S. (2017) · Surface and Interface Analysis · doi:10.1002/sia.6279 · Cited by 25
Gokhale, P., Mitra, D., Sowade, E., Mitra, K. Y., Gomes, H. L., Ramón, E., Al‐Hamry, A., Kanoun, O., & Baumann, R. R. (2017) · Nanotechnology · doi:10.1088/1361-6528/aa9238 · Cited by 25
Printed Piezoelectric Energy Harvesting Device
Ali, M., Prakash, D., Zillger, T., Singh, P. K., & Hübler, A. C. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201300427 · Cited by 20
All-printed multilayer high voltage capacitors with integrated processing feedback
Hardin, J. O., Grabowski, C. A., Lucas, M. S., Durstock, M. F., & Berrigan, J. D. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.02.011 · Cited by 20
Coelho, J., Kremer, M. P., Pinilla, S., & Nicolosi, V. (2020) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2019.12.004 · Cited by 19
Direct printing of performance tunable strain sensor via nanoparticle laser patterning process
Song, J., Kim, H., Kim, M., Min, S., Wang, Y., & Ahn, S. (2020) · Virtual and Physical Prototyping · doi:10.1080/17452759.2020.1733431 · Cited by 17
Kwak, J. H., Chun, S. J., Shon, C.-H., & Jung, S. (2018) · Applied Physics Letters · doi:10.1063/1.5022847 · Cited by 13
Cited by
Nazir, A., Gokcekaya, O., Md Masum Billah, K., Ertugrul, O., Jiang, J., Sun, J., & Hussain, S. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.111661 · Cited by 773
Wang, H., Zhang, W., Ladika, D., Yu, H., Gailevičius, D., Wang, H., Pan, C., Nair, P. N. S., Ke, Y., Mori, T., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202214211 · Cited by 401
3D printed electronics: Processes, materials and future trends
Tan, H. W., Choong, Y. Y. C., Kuo, C. N., Low, H. Y., & Chua, C. K. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100945 · Cited by 327
Extrusion-based additive manufacturing technologies: State of the art and future perspectives
Altıparmak, S. C., Yardley, V. A., Shi, Z., & Lin, J. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.09.032 · Cited by 320
Post-Production Finishing Processes Utilized in 3D Printing Technologies
Kantaros, A., Ganetsos, T., Petrescu, F., Ungureanu, L., & Munteanu, I. (2024) · Processes · doi:10.3390/pr12030595 · Cited by 80
Metadata
- Authors
- Goh, G. L., Zhang, H., Chong, T. H., & Yeong, W. Y.
- Venue
- Advanced Electronic Materials
- Publisher
- Wiley
- Published
- 2021-07-16
- Volume
- 7
- Issue
- 10
- ISSN
- 2199-160X (ISSN-L)
- OpenAlex
- W3184677434
- Cited by
- 319
- References
- 110
- FWCI
- 14.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.