The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
14.1% CsPbI3 Perovskite Quantum Dot Solar Cells via Cesium Cation Passivation
Abstract
Surface manipulation of quantum dots (QDs) has been extensively reported to be crucial to their performance when applied into optoelectronic devices, especially for photovoltaic devices. In this work, an efficient surface passivation method for emerging CsPbI 3 perovskite QDs using a variety of inorganic cesium salts (cesium acetate (CsAc), cesium idodide (CsI), cesium carbonate (Cs 2 CO 3), and cesium nitrate (CsNO 3)) is reported. The Cs‐salts post‐treatment can not only fill the vacancy at the CsPbI 3 perovskite surface but also improve electron coupling between CsPbI 3 QDs. As a result, the free carrier lifetime, diffusion length, and mobility of QD film are simultaneously improved, which are beneficial for fabricating high‐quality conductive QD films for efficient solar cell devices. After optimizing the post‐treatment process, the short‐circuit current density and fill factor are significantly enhanced, delivering an impressive efficiency of 14.10% for CsPbI 3 QD solar cells. In addition, the Cs‐salt‐treated CsPbI 3 QD devices exhibit improved stability against moisture due to the improved surface environment of these QDs. These findings will provide insight into the design of high‐performance and low‐trap‐states perovskite QD films with desirable optoelectronic properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Protesescu, L., Yakunin, S., Bodnarchuk, M. I., Krieg, F., Caputo, R., Hendon, C. H., Yang, R. X., Walsh, A., & Kovalenko, M. V. (2015) · Nano Letters · doi:10.1021/nl5048779 · Cited by 9,209
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells
Yang, W. S., Park, B.-W., Jung, E. H., Jeon, N. J., Kim, Y. C., Lee, D. U., Shin, S. S., Seo, J., Kim, E. K., Noh, J. H., et al. (2017) · Science · doi:10.1126/science.aan2301 · Cited by 5,445
Saliba, M., Matsui, T., Seo, J.-Y., Domanski, K., Correa-Baena, J.-P., Nazeeruddin, M. K., Zakeeruddin, S. M., Tress, W., Abate, A., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03874j · Cited by 5,440
Quantum dot–induced phase stabilization of α-CsPbI 3 perovskite for high-efficiency photovoltaics
Swarnkar, A., Marshall, A. R., Sanehira, E. M., Chernomordik, B. D., Moore, D. T., Christians, J. A., Chakrabarti, T., & Luther, J. M. (2016) · Science · doi:10.1126/science.aag2700 · Cited by 2,794
Self-citationProperties and potential optoelectronic applications of lead halide perovskite nanocrystals
Kovalenko, M. V., Protesescu, L., & Bodnarchuk, M. I. (2017) · Science · doi:10.1126/science.aam7093 · Cited by 2,652
Jeon, N. J., Na, H., Jung, E. H., Yang, T.-Y., Lee, Y. G., Kim, G., Shin, H.-W., Il Seok, S., Lee, J., & Seo, J. (2018) · Nature Energy · doi:10.1038/s41560-018-0200-6 · Cited by 2,089
Bi, D., Yi, C., Luo, J., Décoppet, J.-D., Zhang, F., Zakeeruddin, S. M., Li, X., Hagfeldt, A., & Grätzel, M. (2016) · Nature Energy · doi:10.1038/nenergy.2016.142 · Cited by 2,037
Inorganic caesium lead iodide perovskite solar cells
Eperon, G. E., Paternò, G. M., Sutton, R. J., Zampetti, A., Haghighirad, A. A., Cacialli, F., & Snaith, H. J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta06398a · Cited by 1,852
Improved performance and stability in quantum dot solar cells through band alignment engineering
Chuang, C.-H. M., Brown, P. R., Bulović, V., & Bawendi, M. G. (2014) · Nature Materials · doi:10.1038/nmat3984 · Cited by 1,795
Robel, I., Subramanian, V., Kuno, M., & Kamat, P. V. (2006) · Journal of the American Chemical Society · doi:10.1021/ja056494n · Cited by 1,762
PbSe Nanocrystal Solids for n- and p-Channel Thin Film Field-Effect Transistors
Talapin, D. V., & Murray, C. B. (2005) · Science · doi:10.1126/science.1116703 · Cited by 1,680
Defect migration in methylammonium lead iodide and its role in perovskite solar cell operation
Azpiroz, J. M., Mosconi, E., Bisquert, J., & De Angelis, F. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01265a · Cited by 1,644
Colloidal-quantum-dot photovoltaics using atomic-ligand passivation
Tang, J., Kemp, K. W., Hoogland, S., Jeong, K. S., Liu, H., Levina, L., Furukawa, M., Wang, X., Debnath, R., Cha, D., et al. (2011) · Nature Materials · doi:10.1038/nmat3118 · Cited by 1,569
Building devices from colloidal quantum dots
Kagan, C. R., Lifshitz, E., Sargent, E. H., & Talapin, D. V. (2016) · Science · doi:10.1126/science.aac5523 · Cited by 1,404
Stability of Metal Halide Perovskite Solar Cells
Leijtens, T., Eperon, G. E., Noel, N. K., Habisreutinger, S. N., Petrozza, A., & Snaith, H. J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500963 · Cited by 1,308
Prospects of Nanoscience with Nanocrystals
Kovalenko, M. V., Manna, L., Cabot, A., Hens, Z., Talapin, D. V., Kagan, C. R., Klimov, V. I., Rogach, A. L., Reiss, P., Milliron, D. J., et al. (2015) · ACS Nano · doi:10.1021/nn506223h · Cited by 1,226
Enhanced mobility CsPbI 3 quantum dot arrays for record-efficiency, high-voltage photovoltaic cells
Sanehira, E. M., Marshall, A. R., Christians, J. A., Harvey, S. P., Ciesielski, P. N., Wheeler, L. M., Schulz, P., Lin, L. Y., Beard, M. C., & Luther, J. M. (2017) · Science Advances · doi:10.1126/sciadv.aao4204 · Cited by 977
Self-citationSchottky Solar Cells Based on Colloidal Nanocrystal Films
Luther, J. M., Law, M., Beard, M. C., Song, Q., Reese, M. O., Ellingson, R. J., & Nozik, A. J. (2008) · Nano Letters · doi:10.1021/nl802476m · Cited by 928
Self-citationHybrid organic–inorganic inks flatten the energy landscape in colloidal quantum dot solids
Liu, M., Voznyy, O., Sabatini, R., García de Arquer, F. P., Munir, R., Balawi, A. H., Lan, X., Fan, F., Walters, G., Kirmani, A. R., et al. (2017) · Nature Materials · doi:10.1038/nmat4800 · Cited by 773
Strongly emissive perovskite nanocrystal inks for high-voltage solar cells
Akkerman, Q. A., Gandini, M., Di Stasio, F., Rastogi, P., Palazon, F., Bertoni, G., Ball, J. M., Prato, M., Petrozza, A., & Manna, L. (2016) · Nature Energy · doi:10.1038/nenergy.2016.194 · Cited by 721
Bifunctional Stabilization of All-Inorganic α-CsPbI3 Perovskite for 17% Efficiency Photovoltaics
Wang, Y., Zhang, T., Kan, M., & Zhao, Y. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b07927 · Cited by 690
Zhang, T., Dar, M. I., Li, G., Xu, F., Guo, N., Grätzel, M., & Zhao, Y. (2017) · Science Advances · doi:10.1126/sciadv.1700841 · Cited by 647
Wang, P., Zhang, X., Zhou, Y., Jiang, Q., Ye, Q., Chu, Z., Li, X., Yang, X., Yin, Z., & You, J. (2018) · Nature Communications · doi:10.1038/s41467-018-04636-4 · Cited by 637
Self-citationYella, A., Heiniger, L.-P., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2014) · Nano Letters · doi:10.1021/nl500399m · Cited by 430
Wheeler, L. M., Sanehira, E. M., Marshall, A. R., Schulz, P., Suri, M., Anderson, N. C., Christians, J. A., Nordlund, D., Sokaras, D., Kroll, T., et al. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b04984 · Cited by 412
Self-citationBai, D., Zhang, J., Jin, Z., Bian, H., Wang, K., Wang, H., Liang, L., Wang, Q., & Liu, S. F. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00270 · Cited by 410
The role of surface passivation for efficient and photostable PbS quantum dot solar cells
Cao, Y., Stavrinadis, A., Lasanta, T., So, D., & Konstantatos, G. (2016) · Nature Energy · doi:10.1038/nenergy.2016.35 · Cited by 383
Graded Bandgap CsPbI2+Br1− Perovskite Solar Cells with a Stabilized Efficiency of 14.4%
Bian, H., Bai, D., Jin, Z., Wang, K., Liang, L., Wang, H., Zhang, J., Wang, Q., & Liu, S. (. (2018) · Joule · doi:10.1016/j.joule.2018.04.012 · Cited by 366
Passivation Using Molecular Halides Increases Quantum Dot Solar Cell Performance
Lan, X., Voznyy, O., Kiani, A., García de Arquer, F. P., Abbas, A. S., Kim, G., Liu, M., Yang, Z., Walters, G., Xu, J., et al. (2016) · Advanced Materials · doi:10.1002/adma.201503657 · Cited by 350
Efficient α-CsPbI3 Photovoltaics with Surface Terminated Organic Cations
Wang, Y., Zhang, T., Kan, M., Li, Y., Wang, T., & Zhao, Y. (2018) · Joule · doi:10.1016/j.joule.2018.06.013 · Cited by 348
10.6% Certified Colloidal Quantum Dot Solar Cells via Solvent-Polarity-Engineered Halide Passivation
Lan, X., Voznyy, O., García de Arquer, F. P., Liu, M., Xu, J., Proppe, A. H., Walters, G., Fan, F., Tan, H., Liu, M., et al. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b01957 · Cited by 338
Zhang, J., Bai, D., Jin, Z., Bian, H., Wang, K., Sun, J., Wang, Q., & Liu, S. (. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703246 · Cited by 338
Yuan, J., Ling, X., Yang, D., Li, F., Zhou, S., Shi, J., Qian, Y., Hu, J., Sun, Y., Yang, Y., et al. (2018) · Joule · doi:10.1016/j.joule.2018.08.011 · Cited by 333
Self-citation2D matrix engineering for homogeneous quantum dot coupling in photovoltaic solids
Xu, J., Voznyy, O., Liu, M., Kirmani, A. R., Walters, G., Munir, R., Abdelsamie, M., Proppe, A. H., Sarkar, A., García de Arquer, F. P., et al. (2018) · Nature Nanotechnology · doi:10.1038/s41565-018-0117-z · Cited by 316
Zhang, J., Gao, J., Miller, E. M., Luther, J. M., & Beard, M. C. (2014) · ACS Nano · doi:10.1021/nn405236k · Cited by 307
Self-citationLuo, J., Xia, J., Yang, H., Chen, L., Wan, Z., Han, F., Malik, H. A., Zhu, X., & Jia, C. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00036k · Cited by 271
ten Brinck, S., & Infante, I. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00595 · Cited by 250
Wang, Q., Jin, Z., Chen, D., Bai, D., Bian, H., Sun, J., Zhu, G., Wang, G., & Liu, S. (. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800007 · Cited by 219
Bai, D., Bian, H., Jin, Z., Wang, H., Meng, L., Wang, Q., & (Frank) Liu, S. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.08.012 · Cited by 208
Lu, K., Wang, Y., Liu, Z., Han, L., Shi, G., Fang, H., Chen, J., Ye, X., Chen, S., Yang, F., et al. (2018) · Advanced Materials · doi:10.1002/adma.201707572 · Cited by 187
Self-citationIn Situ Passivation for Efficient PbS Quantum Dot Solar Cells by Precursor Engineering
Wang, Y., Lu, K., Han, L., Liu, Z., Shi, G., Fang, H., Chen, S., Wu, T., Yang, F., Gu, M., et al. (2018) · Advanced Materials · doi:10.1002/adma.201704871 · Cited by 177
Self-citationLi, F., Yuan, J., Ling, X., Zhang, Y., Yang, Y., Cheung, S. H., Ho, C. H. Y., Gao, X., & Ma, W. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706377 · Cited by 162
Self-citationZhang, J., Jin, Z., Liang, L., Wang, H., Bai, D., Bian, H., Wang, K., Wang, Q., Yuan, N., Ding, J., et al. (2018) · Advanced Science · doi:10.1002/advs.201801123 · Cited by 107
Yang, F., Xu, Y., Gu, M., Zhou, S., Wang, Y., Lu, K., Liu, Z., Ling, X., Zhu, Z., Chen, J., et al. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta05946b · Cited by 85
Self-citationCrisp, R. W., Pach, G. F., Kurley, J. M., France, R. M., Reese, M. O., Nanayakkara, S. U., MacLeod, B. A., Talapin, D. V., Beard, M. C., & Luther, J. M. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04423 · Cited by 81
Self-citationShi, G., Wang, Y., Liu, Z., Han, L., Liu, J., Wang, Y., Lu, K., Chen, S., Ling, X., Li, Y., et al. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602667 · Cited by 79
Self-citationZhang, M., Zheng, Z., Fu, Q., Guo, P., Zhang, S., Chen, C., Chen, H., Wang, M., Luo, W., & Tian, Y. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b01532 · Cited by 68
Cited by
Surface Chemistry Engineering of Perovskite Quantum Dots: Strategies, Applications, and Perspectives
Bai, Y., Hao, M., Ding, S., Chen, P., & Wang, L. (2022) · Advanced Materials · doi:10.1002/adma.202105958 · Cited by 394
Xiang, W., Liu, S. (., & Tress, W. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00157d · Cited by 386
Flexible and efficient perovskite quantum dot solar cells via hybrid interfacial architecture
Hu, L., Zhao, Q., Huang, S., Zheng, J., Guan, X., Patterson, R., Kim, J., Shi, L., Lin, C.-H., Lei, Q., et al. (2021) · Nature Communications · doi:10.1038/s41467-020-20749-1 · Cited by 368
Self-citationArtificial Chemist: An Autonomous Quantum Dot Synthesis Bot
Epps, R. W., Bowen, M. S., Volk, A. A., Abdel‐Latif, K., Han, S., Reyes, K. G., Amassian, A., & Abolhasani, M. (2020) · Advanced Materials · doi:10.1002/adma.202001626 · Cited by 323
Zhao, Q., Hazarika, A., Schelhas, L. T., Liu, J., Gaulding, E. A., Li, G., Zhang, M., Toney, M. F., Sercel, P. C., & Luther, J. M. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.9b02395 · Cited by 308
Self-citation
Metadata
- Authors
- Ling, X., Zhou, S., Yuan, J., Shi, J., Qian, Y., Larson, B. W., Zhao, Q., Qin, C., Li, F., Shi, G., Stewart, C., Hu, J., Zhang, X., Luther, J. M., Duhm, S., & Ma, W.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2019-06-23
- Volume
- 9
- Issue
- 28
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2954555689
- Cited by
- 343
- References
- 52
- FWCI
- 18.50
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.