The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Diffusion Limitation of Lithium Metal and Li–Mg Alloy Anodes on LLZO Type Solid Electrolytes as a Function of Temperature and Pressure
Open accessAbstract
The morphological instability of the lithium metal anode is the key factor restricting the rate capability of lithium metal solid state batteries. During lithium stripping, pore formation takes place at the interface due to the slow diffusion kinetics of vacancies in the lithium metal. The resulting current focusing increases the internal cell resistance and promotes fast lithium penetration. In this work, galvanostatic electrochemical impedance spectroscopy is used to investigate operando the morphological changes at the interface by analysis of the interface capacitances. Therewith, the effect of temperature, stack pressure, and chemical modification is investigated. The work demonstrates that introducing 10 at% Mg into the lithium metal anode can effectively prevent contact loss. Nevertheless, a fundamental kinetic limitation is also observed for the Li‐rich alloy, namely the diffusion controlled decrease of the lithium metal concentration at the interface. An analytical diffusion model is used to describe the temperature‐dependent delithiation kinetics of Li–Mg alloys. Overall, it is shown that different electrode design concepts should be considered. Mg alloying can increase lithium utilization, when no external pressure is applied while pure lithium metal is superior for setups that allow stack pressures in the MPa range.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
A solid future for battery development
Janek, J., & Zeier, W. G. (2016) · Nature Energy · doi:10.1038/nenergy.2016.141 · Cited by 3,979
Self-citationShewmon, P. (2016) · Springer eBooks · doi:10.1007/978-3-319-48206-4 · Cited by 3,228
Alloy Negative Electrodes for Li-Ion Batteries
Obrovac, M. N., & Chevrier, V. L. (2014) · Chemical Reviews · doi:10.1021/cr500207g · Cited by 2,175
Unit-cell refinement from powder diffraction scans
Pawley, G. S. (1981) · Journal of Applied Crystallography · doi:10.1107/s0021889881009618 · Cited by 1,965
Albertus, P., Babinec, S., Litzelman, S., & Newman, A. (2017) · Nature Energy · doi:10.1038/s41560-017-0047-2 · Cited by 1,888
The Impact of Elastic Deformation on Deposition Kinetics at Lithium/Polymer Interfaces
Monroe, C., & Newman, J. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1850854 · Cited by 1,701
Placke, T., Kloepsch, R., Dühnen, S., & Winter, M. (2017) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-017-3610-7 · Cited by 1,117
Mechanism of Lithium Metal Penetration through Inorganic Solid Electrolytes
Porz, L., Swamy, T., Sheldon, B. W., Rettenwander, D., Frömling, T., Thaman, H. L., Berendts, S., Uecker, R., Carter, W. C., & Chiang, Y. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701003 · Cited by 1,117
Kasemchainan, J., Zekoll, S., Spencer-Jolly, D., Ning, Z., Hartley, G. O., Marrow, T. J., & Bruce, P. G. (2019) · Nature Materials · doi:10.1038/s41563-019-0438-9 · Cited by 1,038
Recent Advances in Energy Chemistry between Solid-State Electrolyte and Safe Lithium-Metal Anodes
Cheng, X.-B., Zhao, C.-Z., Yao, Y.-X., Liu, H., & Zhang, Q. (2019) · Chem · doi:10.1016/j.chempr.2018.12.002 · Cited by 874
Sharafi, A., Kazyak, E., Davis, A. L., Yu, S., Thompson, T., Siegel, D. J., Dasgupta, N. P., & Sakamoto, J. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b03002 · Cited by 844
Fu, K. (., Gong, Y., Liu, B., Zhu, Y., Xu, S., Yao, Y., Luo, W., Wang, C., Lacey, S. D., Dai, J., et al. (2017) · Science Advances · doi:10.1126/sciadv.1601659 · Cited by 842
Electrochemical in situ investigations of SEI and dendrite formation on the lithium metal anode
Bieker, G., Winter, M., & Bieker, P. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp05865h · Cited by 777
Review—Practical Challenges Hindering the Development of Solid State Li Ion Batteries
Kerman, K., Luntz, A., Viswanathan, V., Chiang, Y.-M., & Chen, Z. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1571707jes · Cited by 712
Intergranular Li metal propagation through polycrystalline Li6.25Al0.25La3Zr2O12 ceramic electrolyte
Cheng, E. J., Sharafi, A., & Sakamoto, J. S. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.12.018 · Cited by 708
Structure and dynamics of the fast lithium ion conductor “Li7La3Zr2O12”
Buschmann, H., Dölle, J., Berendts, S., Kuhn, A., Bottke, P., Wilkening, M., Heitjans, P., Senyshyn, A., Ehrenberg, H., Lotnyk, A., et al. (2011) · Physical Chemistry Chemical Physics · doi:10.1039/c1cp22108f · Cited by 695
Self-citationTransition from Superlithiophobicity to Superlithiophilicity of Garnet Solid-State Electrolyte
Luo, W., Gong, Y., Zhu, Y., Fu, K. K., Dai, J., Lacey, S. D., Wang, C., Liu, B., Han, X., Mo, Y., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b06777 · Cited by 671
Sand, H. J. S. (1901) · The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science · doi:10.1080/14786440109462590 · Cited by 665
Luo, W., Gong, Y., Zhu, Y., Li, Y., Yao, Y., Zhang, Y., Fu, K. (., Pastel, G., Lin, C., Mo, Y., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606042 · Cited by 651
Wang, X., Zeng, W., Hong, L., Xu, W., Yang, H., Wang, F., Duan, H., Tang, M., & Jiang, H. (2018) · Nature Energy · doi:10.1038/s41560-018-0104-5 · Cited by 499
Lithium-Metal Growth Kinetics on LLZO Garnet-Type Solid Electrolytes
Krauskopf, T., Dippel, R., Hartmann, H., Peppler, K., Mogwitz, B., Richter, F. H., Zeier, W. G., & Janek, J. (2019) · Joule · doi:10.1016/j.joule.2019.06.013 · Cited by 463
Self-citationThe Effect of Interfacial Deformation on Electrodeposition Kinetics
Monroe, C., & Newman, J. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1710893 · Cited by 394
Lithium garnets: Synthesis, structure, Li + conductivity, Li + dynamics and applications
Ramakumar, S., Deviannapoorani, C., Dhivya, L., et al. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.04.007 · Cited by 383
Shen, F., Dixit, M. B., Xiao, X., & Hatzell, K. B. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00249 · Cited by 374
Lithium Mechanics: Roles of Strain Rate and Temperature and Implications for Lithium Metal Batteries
LePage, W. S., Chen, Y., Kazyak, E., Chen, K.-H., Sanchez, A. J., Poli, A., Arruda, E. M., Thouless, M. D., & Dasgupta, N. P. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0221902jes · Cited by 334
Dopant‐Dependent Stability of Garnet Solid Electrolyte Interfaces with Lithium Metal
Zhu, Y., Connell, J. G., Tepavcevic, S., Zapol, P., Garcia‐Mendez, R., Taylor, N. J., Sakamoto, J., Ingram, B. J., Curtiss, L. A., Freeland, J. W., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803440 · Cited by 323
Yang, C., Xie, H., Ping, W., Fu, K., Liu, B., Rao, J., Dai, J., Wang, C., Pastel, G., & Hu, L. (2019) · Advanced Materials · doi:10.1002/adma.201804815 · Cited by 317
Unlocking the Energy Capabilities of Lithium Metal Electrode with Solid-State Electrolytes
Shen, Y., Zhang, Y., Han, S., Wang, J., Peng, Z., & Chen, L. (2018) · Joule · doi:10.1016/j.joule.2018.06.021 · Cited by 293
Transient Behavior of the Metal Interface in Lithium Metal–Garnet Batteries
Fu, K. (., Gong, Y., Fu, Z., Xie, H., Yao, Y., Liu, B., Carter, M., Wachsman, E., & Hu, L. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201708637 · Cited by 290
Sharafi, A., Haslam, C. G., Kerns, R. D., Wolfenstine, J., & Sakamoto, J. (2017) · J. Mater. Chem. A · doi:10.1039/c7ta06790a · Cited by 272
He, M., Cui, Z., Chen, C., Li, Y., & Guo, X. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta02276c · Cited by 243
Swamy, T., Park, R., Sheldon, B. W., Rettenwander, D., Porz, L., Berendts, S., Uecker, R., Carter, W. C., & Chiang, Y.-M. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.1391814jes · Cited by 227
Regulating Key Variables and Visualizing Lithium Dendrite Growth: An Operando X-ray Study
Yu, S., Huang, X. M., Brock, J. D., & Abruña, H. D. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.8b13297 · Cited by 129
Zhang, X., Chen, X., Xu, R. X., Cheng, X., Peng, H., Zhang, R., Huang, J., & Zhang, Q. (2017) · Angewandte Chemie · doi:10.1002/ange.201707093 · Cited by 62
Koshikawa, H., Matsuda, S., Kamiya, K., Miyayama, M., Kubo, Y., Uosaki, K., Hashimoto, K., & Nakanishi, S. (2019) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2019.01.025 · Cited by 46
Cited by
Tian, Y., Zeng, G., Rutt, A., Shi, T., Kim, H., Wang, J., Koettgen, J., Sun, Y., Ouyang, B., Chen, T., et al. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00767 · Cited by 1,614
Physicochemical Concepts of the Lithium Metal Anode in Solid-State Batteries
Krauskopf, T., Richter, F. H., Zeier, W. G., & Janek, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00431 · Cited by 892
Self-citationLu, Y., Zhao, C., Yuan, H., Cheng, X., Huang, J., & Zhang, Q. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009925 · Cited by 562
Designing electrolytes and interphases for high-energy lithium batteries
Wan, H., Xu, J., & Wang, C. (2023) · Nature Reviews Chemistry · doi:10.1038/s41570-023-00557-z · Cited by 472
Zheng, J., Kim, M. S., Tu, Z., Choudhury, S., Tang, T., & Archer, L. A. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00883g · Cited by 466
Metadata
- Authors
- Krauskopf, T., Mogwitz, B., Rosenbach, C., Zeier, W. G., & Janek, J.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2019-10-08
- Volume
- 9
- Issue
- 44
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2979450776
- Cited by
- 438
- References
- 36
- FWCI
- 13.48
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.