The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Structure–process–yield interrelations in nanocrystalline cellulose extraction
Abstract
In order to improve the extraction of nanocrystalline cellulose (NCC) from sulfuric acid hydrolysis of chemical pulps, we have studied the effect of hydrolysis conditions on the degree of polymerization (DP), the extent of sulfation, morphological, and solid‐state characteristics of the extracted materials vis‐à‐vis yield. Our results demonstrate that sulfation plays a significant role in (i) determining the yield of, and (ii) imparting the unique solid‐state characteristics to, the extracted, H 2 O‐insoluble cellulose nanomaterial from sulfuric acid hydrolysis. The hydrolysis process is itself proven to be highly reproducible, and NCC with high crystallinity (>80%) and a yield between 21% and 38% could be extracted from a fully bleached, commercial softwood kraft pulp using 64 wt.% sulfuric acid at 45–65°C after freeze drying. The NCC aggregates, with iridescent patterns typical of chiral nematic materials, are parallelepiped rod‐like structures which possess cross‐sections in the nanometer range and lengths orders of magnitude larger, resulting in high aspect ratios. The Ruland–Rietveld analysis was employed to precisely resolve X‐ray diffraction patterns and obtain information on crystallite size, crystalline and amorphous areas, and crystallinity of the extracted materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A profile refinement method for nuclear and magnetic structures
Rietveld, H. M. (1969) · Journal of Applied Crystallography · doi:10.1107/s0021889869006558 · Cited by 17,524
Segal, L., Creely, J. J., Martin, A. E., & Conrad, C. M. (1959) · Textile Research Journal · doi:10.1177/004051755902901003 · Cited by 8,613
Beck-Candanedo, S., Roman, M., & Gray, D. G. (2005) · Biomacromolecules · doi:10.1021/bm049300p · Cited by 1,588
Roman, M., & Winter, W. T. (2004) · Biomacromolecules · doi:10.1021/bm034519+ · Cited by 1,272
Helicoidal self-ordering of cellulose microfibrils in aqueous suspension
Revol, J.-F., Bradford, H., Giasson, J., Marchessault, R. H., & Gray, D. G. (1992) · International Journal of Biological Macromolecules · doi:10.1016/s0141-8130(05)80008-x · Cited by 1,250
Rotatory power and other optical properties of certain liquid crystals
de Vries, H. (1951) · Acta Crystallographica · doi:10.1107/s0365110x51000751 · Cited by 1,207
Polymer nanocomposites reinforced by cellulose whiskers
Favier, V., Chanzy, H., & Cavaille, J. Y. (1995) · Macromolecules · doi:10.1021/ma00122a053 · Cited by 1,149
Effect of microcrystallite preparation conditions on the formation of colloid crystals of cellulose
DONG, X. M., REVOL, J.-F., & GRAY, D. G. (1998) · Cellulose · doi:10.1023/a:1009260511939 · Cited by 1,032
Experimental determination of the elastic modulus of crystalline regions in oriented polymers
Sakurada, I., Nukushina, Y., & Ito, T. (1962) · Journal of Polymer Science · doi:10.1002/pol.1962.1205716551 · Cited by 883
Araki, J., Wada, M., Kuga, S., & Okano, T. (1998) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(98)00404-x · Cited by 769
Cited by
Wood-Derived Materials for Green Electronics, Biological Devices, and Energy Applications
Zhu, H., Luo, W., Ciesielski, P. N., Fang, Z., Zhu, J. Y., Henriksson, G., Himmel, M. E., & Hu, L. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00225 · Cited by 1,532
Production of nanocrystalline cellulose from lignocellulosic biomass: Technology and applications
Brinchi, L., Cotana, F., Fortunati, E., & Kenny, J. M. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.01.033 · Cited by 1,121
Benchmarking Cellulose Nanocrystals: From the Laboratory to Industrial Production
Reid, M. S., Villalobos, M., & Cranston, E. D. (2017) · Langmuir · doi:10.1021/acs.langmuir.6b03765 · Cited by 518
The Self‐Assembly of Cellulose Nanocrystals: Hierarchical Design of Visual Appearance
Parker, R. M., Guidetti, G., Williams, C. A., Zhao, T., Narkevicius, A., Vignolini, S., & Frka‐Petesic, B. (2018) · Advanced Materials · doi:10.1002/adma.201704477 · Cited by 516
Chen, L., Zhu, J. Y., Baez, C., Kitin, P., & Elder, T. (2016) · Green Chemistry · doi:10.1039/c6gc00687f · Cited by 514
Understanding Nanocellulose–Water Interactions: Turning a Detriment into an Asset
Solhi, L., Guccini, V., Heise, K., Solala, I., Niinivaara, E., Xu, W., Mihhels, K., Kröger, M., Meng, Z., Wohlert, J., et al. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00611 · Cited by 506
A review on commercial-scale high-value products that can be produced alongside cellulosic ethanol
Rosales-Calderon, O., & Arantes, V. (2019) · Biotechnology for Biofuels · doi:10.1186/s13068-019-1529-1 · Cited by 503
Cellulose Nanoparticles: Structure–Morphology–Rheology Relationships
Li, M.-C., Wu, Q., Song, K., Lee, S., Qing, Y., & Wu, Y. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00144 · Cited by 487
Production routes to tailor the performance of cellulose nanocrystals
Vanderfleet, O. M., & Cranston, E. D. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-00239-y · Cited by 456
Chen, L., Wang, Q., Hirth, K., Baez, C., Agarwal, U. P., & Zhu, J. Y. (2015) · Cellulose · doi:10.1007/s10570-015-0615-1 · Cited by 408
Functional Materials from Cellulose‐Derived Liquid‐Crystal Templates
Giese, M., Blusch, L. K., Khan, M. K., & MacLachlan, M. J. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201407141 · Cited by 393
Cellulose Nanoparticles as Modifiers for Rheology and Fluid Loss in Bentonite Water-based Fluids
Li, M.-C., Wu, Q., Song, K., Qing, Y., & Wu, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00498 · Cited by 373
An improved X-ray diffraction method for cellulose crystallinity measurement
Ju, X., Bowden, M., Brown, E. E., & Zhang, X. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.12.071 · Cited by 372
Rheology of Nanocrystalline Cellulose Aqueous Suspensions
Shafiei-Sabet, S., Hamad, W. Y., & Hatzikiriakos, S. G. (2012) · Langmuir · doi:10.1021/la303380v · Cited by 361
Self-citationResponsive Photonic Hydrogels Based on Nanocrystalline Cellulose
Kelly, J. A., Shukaliak, A. M., Cheung, C. C. Y., Shopsowitz, K. E., Hamad, W. Y., & MacLachlan, M. J. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201302687 · Cited by 354
Self-citationTang, Y., Yang, S., Zhang, N., & Zhang, J. (2014) · Cellulose · doi:10.1007/s10570-013-0158-2 · Cited by 289
Flexible Photonic Cellulose Nanocrystal Films
Guidetti, G., Atifi, S., Vignolini, S., & Hamad, W. Y. (2016) · Advanced Materials · doi:10.1002/adma.201603386 · Cited by 263
Self-citationNanocellulose for Sustainable Water Purification
Das, R., Lindström, T., Sharma, P. R., Chi, K., & Hsiao, B. S. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00683 · Cited by 261
Miao, C., & Hamad, W. Y. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.08.012 · Cited by 112
Self-citation
Metadata
- Authors
- Hamad, W. Y., & Hu, T. Q.
- Venue
- The Canadian Journal of Chemical Engineering
- Publisher
- Wiley
- Published
- 2010-05-05
- Volume
- 88
- Issue
- 3
- Pages
- 392-402
- ISSN
- 0008-4034 (ISSN-L)
- 1939-019X
- OpenAlex
- W2010328845
- Cited by
- 362
- References
- 44
- FWCI
- 4.39
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.