Tuned mass dampers for structures with closely spaced natural frequencies
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Analytical results are developed for vibration control of structures with one or more Tuned Mass Dampers (TMDs). The input is a harmonic load with a range of possible frequencies. The control objective is to reduce the maximum amplitude of the structural response. Perturbation theory is used with three sets of small parameters: the ratio of TMD and structural modal masses, the damping of the system, and the differences between the structural and loading frequencies. It is shown analytically that for structures with widely spaced natural frequencies, the response can be approximated accurately by the response of the well‐known single‐mode structure/TMD system. For structures with p closely spaced natural frequencies, more general analytical results are developed to describe the coupling between the motions of the p modes of the structure and the multiple TMDs. The results show that at least p TMDs with properly placed attachments to the structure are necessary to control the response. If fewer TMDs are used, the maximum frequency response has a lower bound which is independent of the properties of the TMDs. The TMD placement is shown to be always important, regardless of the spacing of the structure's natural frequencies. The results are illustrated for both lumped‐mass and continuous structures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Dynamic characterization of multiple tuned mass dampers and some design formulas
Abé, M., & Fujino, Y. (1994) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.4290230802 · Cited by 329
Self-citationDynamic characteristics of multiple substructures with closely spaced frequencies
Xu, K., & Igusa, T. (1992) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.4290211203 · Cited by 326
Self-citationVibration Control Using Multiple Tuned Mass Dampers
Igusa, T., & Xu, K. (1994) · Journal of Sound and Vibration · doi:10.1006/jsvi.1994.1341 · Cited by 295
Self-citation
Cited by
Research developments in vibration control of structures using passive tuned mass dampers
Elias, S., & Matsagar, V. (2017) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2017.09.015 · Cited by 556
Vibration suppression of structures using tuned mass damper technology: A state-of-the-art review
Yang, F., Sedaghati, R., & Esmailzadeh, E. (2022) · Journal of Vibration and Control · doi:10.1177/1077546320984305 · Cited by 306
Li, C. (2002) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.128 · Cited by 189
Mass dampers and their optimal designs for building vibration control
Chang, C. C. (1999) · Engineering Structures · doi:10.1016/s0141-0296(97)00213-7 · Cited by 177
Moon, K. S. (2010) · The Structural Design of Tall and Special Buildings · doi:10.1002/tal.499 · Cited by 99
Parametric study on multiple tuned mass dampers for buffeting control of Yangpu Bridge
Gu, M., Chen, S. R., & Chang, C. C. (2001) · Journal of Wind Engineering and Industrial Aerodynamics · doi:10.1016/s0167-6105(01)00094-0 · Cited by 92
Hybrid active tuned mass dampers for structures under the ground acceleration
Li, C., & Cao, B. (2015) · Structural Control and Health Monitoring · doi:10.1002/stc.1716 · Cited by 49
Coupled vibration control with tuned mass damper for long-span bridges
Chen, S. R., & Cai, C. S. (2004) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2003.11.056 · Cited by 40
“As traditional control devices, the dynamic energy absorbers dissipate external energy through providing supplemental damping to the modes of concern [9–11].”
BackgroundUeng, J., Lin, C., & Wang, J. (2008) · The Structural Design of Tall and Special Buildings · doi:10.1002/tal.336 · Cited by 36
GROUND MOTION DOMINANT FREQUENCY EFFECT ON THE DESIGN OF MULTIPLE TUNED MASS DAMPERS
LI∗, C., & LIU†, Y. (2004) · Journal of Earthquake Engineering · doi:10.1080/13632460409350482 · Cited by 35
Ruiz, R. O., Taflanidis, A. A., & Lopez-Garcia, D. (2016) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2016.01.014 · Cited by 32
Optimum Tuned Mass Damper for Wind and Earthquake Response Control of High-Rise Building
Elias, S., & Matsagar, V. (2015) · Advances in Structural Engineering · doi:10.1007/978-81-322-2193-7_113 · Cited by 30
Metadata
- Authors
- Abé, M., & Igusa, T.
- Venue
- Earthquake Engineering & Structural Dynamics
- Publisher
- Wiley
- Published
- 1995-02
- Volume
- 24
- Issue
- 2
- Pages
- 247-261
- ISSN
- 0098-8847 (ISSN-L)
- 1096-9845
- OpenAlex
- W1964133737
- Cited by
- 122
- References
- 3
- FWCI
- 14.23
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.