The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Identifying rate limitation and a guide to design of fast‐charging Li‐ion battery
Open accessAbstract
Fast‐charging is highly demanded for applications requiring short charging time. However, fast‐charging triggers serious problems, leading to decline in charge acceptance and energy efficiency, accelerated capacity degradation, and safety risk. In this work, a three‐electrode coin cell with a Li metal reference electrode is designed to individually record the potential of two electrodes, and measure the impedance of each electrode by using a power‐optimized graphite‐LiNi 0.80 Co 0.15 Al 0.05 O 2 electrode couple. It is shown that regardless of the state‐of‐charge the Li‐ion cell's impedance is contributed predominantly by the cathode, and that the cathode's impedance is dominated by the charge‐transfer resistance. In consistence with the impedance results, polarization of the Li‐ion cell is dominated by the cathode. It is surprised to find that no Li plating occurs on the graphite anode even if the charging rate is increased to 10 C (1 C = 1.30 mA cm−2). The results of this work indicate that low overall impedance with a high cathode‐to‐anode impedance ratio is the key to enabling safe fast‐charging, and that fast‐charging Li‐ion batteries without Li plating on the graphite anode is possible if the cathode and graphite anode are optimistically engineered. image
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lithium-ion battery fast charging: A review
Tomaszewska, A., Chu, Z., Feng, X., O'Kane, S., Liu, X., Chen, J., Ji, C., Endler, E., Li, R., Liu, L., et al. (2019) · eTransportation · doi:10.1016/j.etran.2019.100011 · Cited by 1,592
Calendar Aging of Lithium-Ion Batteries: I. Impact of the Graphite Anode on Capacity Fade
Keil, P., Schuster, S. F., Wilhelm, J., Travi, J., Hauser, A., Karl, R. C., & Jossen, A. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0411609jes · Cited by 669
Kim, N., Chae, S., Ma, J., Ko, M., & Cho, J. (2017) · Nature Communications · doi:10.1038/s41467-017-00973-y · Cited by 434
Zheng, H., Sun, Q., Liu, G., Song, X., & Battaglia, V. S. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.01.122 · Cited by 433
Enabling fast charging – Vehicle considerations
Meintz, A., Zhang, J., Vijayagopal, R., Kreutzer, C., Ahmed, S., Bloom, I., Burnham, A., Carlson, R. B., Dias, F., Dufek, E. J., et al. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.07.093 · Cited by 190
Cited by
Lithium-ion batteries – Current state of the art and anticipated developments
Armand, M., Axmann, P., Bresser, D., Copley, M., Edström, K., Ekberg, C., Guyomard, D., Lestriez, B., Novák, P., Petranikova, M., et al. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228708 · Cited by 888
Feng, Q.-K., Zhong, S.-L., Pei, J.-Y., Zhao, Y., Zhang, D.-L., Liu, D.-F., Zhang, Y.-X., & Dang, Z.-M. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00793 · Cited by 744
Hard Carbon Anodes for Next‐Generation Li‐Ion Batteries: Review and Perspective
Xie, L., Tang, C., Bi, Z., Song, M., Fan, Y., Yan, C., Li, X., Su, F., Zhang, Q., & Chen, C. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202101650 · Cited by 617
The Boundary of Lithium Plating in Graphite Electrode for Safe Lithium‐Ion Batteries
Cai, W., Yan, C., Yao, Y., Xu, L., Chen, X., Huang, J., & Zhang, Q. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202102593 · Cited by 271
Metadata
- Authors
- Zhang, S. S.
- Venue
- InfoMat
- Publisher
- Wiley
- Published
- 2019-12-03
- Volume
- 2
- Issue
- 5
- Pages
- 942-949
- ISSN
- 2567-3165 (ISSN-L)
- OpenAlex
- W2993915872
- Cited by
- 159
- References
- 5
- FWCI
- 12.93
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.