The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Performance of degradable composite bone repair products made via three‐dimensional fabrication techniques
Abstract
This study analyzed the in vivo performance of composite degradable bone repair products fabricated using the TheriForm™ process, a solid freeform fabrication (SFF) technique, in a rabbit calvarial defect model at 8 weeks. Scaffolds were composed of polylactic‐co‐glycolic acid (PLGA) polymer with 20% w/w β‐tricalcium phosphate (β‐TCP) ceramic with engineered macroscopic channels, a controlled porosity gradient, and a controlled pore size for promotion of new bone ingrowth. Scaffolds with engineered macroscopic channels and a porosity gradient had higher percentages of new bone area compared to scaffolds without engineered channels. These scaffolds also had higher percentages of new bone area compared to unfilled control defects, suggesting that scaffold material and design combinations could be tailored to facilitate filling of bony defects. This proof‐of‐concept study demonstrated that channel size, porosity, and pore size can be controlled and used to influence new bone formation and calvarial defect healing. © 2003 Wiley Periodicals, Inc. J Biomed Mater Res 66A: 283–291, 2003
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Scaffolds in tissue engineering bone and cartilage
Hutmacher, D. W. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00121-6 · Cited by 4,994
Synthetic biodegradable polymers as orthopedic devices
Middleton, J. C., & Tipton, A. J. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00101-0 · Cited by 2,741
Hutmacher, D. W., Schantz, T., Zein, I., Ng, K. W., Teoh, S. H., & Tan, K. C. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200105)55:2<203::aid-jbm1007>3.0.co;2-7 · Cited by 1,409
Mooney, D. J., Baldwin, D. F., Suh, N. P., Vacanti, J. P., & Langer, R. (1996) · Biomaterials · doi:10.1016/0142-9612(96)87284-x · Cited by 1,085
Biodegradable polymeric scaffolds for musculoskeletal tissue engineering
Agrawal, C. M., & Ray, R. B. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200105)55:2<141::aid-jbm1000>3.0.co;2-j · Cited by 1,052
Effect of Pore Size and Void Fraction on Cellular Adhesion, Proliferation, and Matrix Deposition
Zeltinger, J., Sherwood, J. K., Graham, D. A., Müeller, R., & Griffith, L. G. (2001) · Tissue Engineering · doi:10.1089/107632701753213183 · Cited by 794
Pore Size of Porous Hydroxyapatite as the Cell-Substratum Controls BMP-Induced Osteogenesis
Tsuruga, E., Takita, H., Itoh, H., Wakisaka, Y., & Kuboki, Y. (1997) · Journal of Biochemistry · doi:10.1093/oxfordjournals.jbchem.a021589 · Cited by 706
The Critical Size Defect as an Experimental Model To Test Bone Repair Materials
Hollinger, J. O., & Kleinschmidt, J. C. (1990) · Journal of Craniofacial Surgery · doi:10.1097/00001665-199001000-00011 · Cited by 625
Mechanical and in vivo performance of hydroxyapatite implants with controlled architectures
Chu, T.-M. G., Orton, D. G., Hollister, S. J., Feinberg, S. E., & Halloran, J. W. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00243-5 · Cited by 554
Fabrication of biodegradable polymer scaffolds to engineer trabecular bone
Thomson, R. C., Yaszemski, M. J., Powers, J. M., & Mikos, A. G. (1996) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856295x00805 · Cited by 493
Cited by
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Porous scaffold design for tissue engineering
Hollister, S. J. (2005) · Nature Materials · doi:10.1038/nmat1421 · Cited by 3,969
Freezing as a Path to Build Complex Composites
Deville, S., Saiz, E., Nalla, R. K., & Tomsia, A. P. (2006) · Science · doi:10.1126/science.1120937 · Cited by 1,900
Controlling the Porosity and Microarchitecture of Hydrogels for Tissue Engineering
Annabi, N., Nichol, J. W., Zhong, X., Ji, C., Koshy, S., Khademhosseini, A., & Dehghani, F. (2010) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2009.0639 · Cited by 1,308
Freeze casting of hydroxyapatite scaffolds for bone tissue engineering
Deville, S., Saiz, E., & Tomsia, A. P. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.06.028 · Cited by 873
Three-dimensional (3D) printed scaffold and material selection for bone repair
Zhang, L., Yang, G., Johnson, B. N., & Jia, X. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.11.039 · Cited by 865
Three‐dimensional printing of porous ceramic scaffolds for bone tissue engineering
Seitz, H., Rieder, W., Irsen, S., Leukers, B., & Tille, C. (2005) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30291 · Cited by 742
Cell proliferation and migration in silk fibroin 3D scaffolds
Mandal, B. B., & Kundu, S. C. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.02.006 · Cited by 583
A review of process development steps for new material systems in three dimensional printing (3DP)
Utela, B., Storti, D., Anderson, R., & Ganter, M. (2008) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2009.03.002 · Cited by 548
Poly (lactic acid)-based biomaterials for orthopaedic regenerative engineering
Narayanan, G., Vernekar, V. N., Kuyinu, E. L., & Laurencin, C. T. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.015 · Cited by 484
Karande, T. S., Ong, J. L., & Agrawal, C. M. (2004) · Annals of Biomedical Engineering · doi:10.1007/s10439-004-7825-2 · Cited by 457
Cox, S. C., Thornby, J. A., Gibbons, G. J., Williams, M. A., & Mallick, K. K. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.11.024 · Cited by 452
Kasten, P., Beyen, I., Niemeyer, P., Luginbühl, R., Bohner, M., & Richter, W. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.05.017 · Cited by 336
Functionally graded materials for orthopedic applications – an update on design and manufacturing
Sola, A., Bellucci, D., & Cannillo, V. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2015.12.013 · Cited by 314
Vascularized Bone Tissue Engineering: Approaches for Potential Improvement
Nguyen, L. H., Annabi, N., Nikkhah, M., Bae, H., Binan, L., Park, S., Kang, Y., Yang, Y., & Khademhosseini, A. (2012) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2012.0012 · Cited by 313
Stem cell- and scaffold-based tissue engineering approaches to osteochondral regenerative medicine
Sundelacruz, S., & Kaplan, D. L. (2009) · Seminars in Cell & Developmental Biology · doi:10.1016/j.semcdb.2009.03.017 · Cited by 306
Binder jetting of ceramics: Powders, binders, printing parameters, equipment, and post-treatment
Lv, X., Ye, F., Cheng, L., Fan, S., & Liu, Y. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.04.012 · Cited by 302
Nanostructured Biomaterials for Regeneration
Wei, G., & Ma, P. X. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200800662 · Cited by 298
Design of artificial extracellular matrices for tissue engineering
Kim, B.-S., Park, I.-K., Hoshiba, T., Jiang, H.-L., Choi, Y.-J., Akaike, T., & Cho, C.-S. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.10.001 · Cited by 296
Fabrication aspects of PLA-CaP/PLGA-CaP composites for orthopedic applications: A review
Zhou, H., Lawrence, J. G., & Bhaduri, S. B. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.01.031 · Cited by 267
Department of Anatomy, R. C. O. S. I. I., Gleeson, J., Plunkett, N., & O’Brien, F. (2010) · European Cells and Materials · doi:10.22203/ecm.v020a18 · Cited by 257
Yedekçi, B., Tezcaner, A., Yılmaz, B., Demir, T., & Evis, Z. (2022) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2021.104941 · Cited by 35
Metadata
- Authors
- Roy, T. D., Simon, J. L., Ricci, J. L., Rekow, E. D., Thompson, V. P., & Parsons, J. R.
- Venue
- Journal of Biomedical Materials Research Part A
- Publisher
- Wiley
- Published
- 2003-07-08
- Volume
- 66A
- Issue
- 2
- Pages
- 283-291
- ISSN
- 1549-3296 (ISSN-L)
- 1552-4965
- OpenAlex
- W2020594734
- Cited by
- 262
- References
- 30
- FWCI
- 4.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.