The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Performance of degradable composite bone repair products made via three‐dimensional fabrication techniques
Abstract
This study analyzed the in vivo performance of composite degradable bone repair products fabricated using the TheriForm™ process, a solid freeform fabrication (SFF) technique, in a rabbit calvarial defect model at 8 weeks. Scaffolds were composed of polylactic‐co‐glycolic acid (PLGA) polymer with 20% w/w β‐tricalcium phosphate (β‐TCP) ceramic with engineered macroscopic channels, a controlled porosity gradient, and a controlled pore size for promotion of new bone ingrowth. Scaffolds with engineered macroscopic channels and a porosity gradient had higher percentages of new bone area compared to scaffolds without engineered channels. These scaffolds also had higher percentages of new bone area compared to unfilled control defects, suggesting that scaffold material and design combinations could be tailored to facilitate filling of bony defects. This proof‐of‐concept study demonstrated that channel size, porosity, and pore size can be controlled and used to influence new bone formation and calvarial defect healing. © 2003 Wiley Periodicals, Inc. J Biomed Mater Res 66A: 283–291, 2003
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Scaffolds in tissue engineering bone and cartilage
Hutmacher, D. W. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00121-6 · Cited by 4,994
Synthetic biodegradable polymers as orthopedic devices
Middleton, J. C., & Tipton, A. J. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00101-0 · Cited by 2,741
Hutmacher, D. W., Schantz, T., Zein, I., Ng, K. W., Teoh, S. H., & Tan, K. C. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200105)55:2<203::aid-jbm1007>3.0.co;2-7 · Cited by 1,409
Mooney, D. J., Baldwin, D. F., Suh, N. P., Vacanti, J. P., & Langer, R. (1996) · Biomaterials · doi:10.1016/0142-9612(96)87284-x · Cited by 1,085
Biodegradable polymeric scaffolds for musculoskeletal tissue engineering
Agrawal, C. M., & Ray, R. B. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200105)55:2<141::aid-jbm1000>3.0.co;2-j · Cited by 1,052
Effect of Pore Size and Void Fraction on Cellular Adhesion, Proliferation, and Matrix Deposition
Zeltinger, J., Sherwood, J. K., Graham, D. A., Müeller, R., & Griffith, L. G. (2001) · Tissue Engineering · doi:10.1089/107632701753213183 · Cited by 794
Pore Size of Porous Hydroxyapatite as the Cell-Substratum Controls BMP-Induced Osteogenesis
Tsuruga, E., Takita, H., Itoh, H., Wakisaka, Y., & Kuboki, Y. (1997) · Journal of Biochemistry · doi:10.1093/oxfordjournals.jbchem.a021589 · Cited by 706
The Critical Size Defect as an Experimental Model To Test Bone Repair Materials
Hollinger, J. O., & Kleinschmidt, J. C. (1990) · Journal of Craniofacial Surgery · doi:10.1097/00001665-199001000-00011 · Cited by 625
Mechanical and in vivo performance of hydroxyapatite implants with controlled architectures
Chu, T.-M. G., Orton, D. G., Hollister, S. J., Feinberg, S. E., & Halloran, J. W. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00243-5 · Cited by 554
Fabrication of biodegradable polymer scaffolds to engineer trabecular bone
Thomson, R. C., Yaszemski, M. J., Powers, J. M., & Mikos, A. G. (1996) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856295x00805 · Cited by 493
Orthopaedic applications for PLA‐PGA biodegradable polymers
Athanasiou, K., Agrawal, C., Barber, F., & Burkhart, S. (1998) · Arthroscopy · doi:10.1016/s0749-8063(98)70099-4 · Cited by 487
Kim, S. S., Utsunomiya, H., Koski, J. A., Wu, B. M., Cima, M. J., Sohn, J., Mukai, K., Griffith, L. G., & Vacanti, J. P. (1998) · Annals of Surgery · doi:10.1097/00000658-199807000-00002 · Cited by 451
Ma, P. X., Zhang, R., Xiao, G., & Franceschi, R. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200102)54:2<284::aid-jbm16>3.0.co;2-w · Cited by 429
Mechanical properties of dense polylactic acid structures fabricated by three dimensional printing
GIORDANO, R. A., Wu, B. M., Borland, S. W., Cima, L. G., Sachs, E. M., & Cima, M. J. (1997) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856297x00588 · Cited by 413
Engineering Bone Regeneration with Bioabsorbable Scaffolds with Novel Microarchitecture
Whang, K., Healy, K. E., Elenz, D. R., Nam, E. K., Tsai, D. C., Thomas, C. H., Nuber, G. W., Glorieux, F. H., Travers, R., & Sprague, S. M. (1999) · Tissue Engineering · doi:10.1089/ten.1999.5.35 · Cited by 405
Oral dosage forms fabricated by Three Dimensional Printing™
Katstra, W. E., Palazzolo, R. D., Rowe, C. W., Giritlioglu, B., Teung, P., & Cima, M. J. (2000) · Journal of Controlled Release · doi:10.1016/s0168-3659(99)00225-4 · Cited by 334
Park, A., Wu, B., & Griffith, L. G. (1998) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856298x00451 · Cited by 322
Multimechanism oral dosage forms fabricated by three dimensional printing™
Rowe, C. W., Katstra, W. E., Palazzolo, R. D., Giritlioglu, B., Teung, P., & Cima, M. J. (2000) · Journal of Controlled Release · doi:10.1016/s0168-3659(99)00224-2 · Cited by 255
In vitro degradation of a novel poly(lactide-co-glycolide) 75/25 foam
Holy, C. E., Dang, S. M., Davies, J. E., & Shoichet, M. S. (1999) · Biomaterials · doi:10.1016/s0142-9612(98)00256-7 · Cited by 241
Curodeau, A., Sachs, E., & Caldarise, S. (2000) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200009)53:5<525::aid-jbm12>3.0.co;2-1 · Cited by 173
Synthetic Biodegradable Polymers for Orthopaedic Applications
Behravesh, E., Yasko, A. W., Engel, P. S., & Mikos, A. G. (1999) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-199910001-00012 · Cited by 163
A convenient animal model for testing bone substitute materials.
Frame, J. W. (1980) · PubMed · Cited by 136
Calvarial Bone Repair with Porous D,L‐Polylactide
SCHWARTZ, I., ROBINSON, B., HOLLINGER, J., Szachowicz, E. H., & Brekke, J. H. (1995) · Otolaryngology · doi:10.1016/s0194-5998(95)70180-x · Cited by 136
Evaluation of hydroxylapatite/poly(l-lactide) composites: physico-chemical properties
Verheyen, C. C. P. M., Klein, C. P. A. T., Hogervorst, J. M. A., Wolke, J. G. C., van Blitterswijk, C., & de Groot, K. (1993) · Journal of Materials Science Materials in Medicine · doi:10.1007/bf00122979 · Cited by 86
Gel casting of resorbable polymers
Coombes, A. G. A., & Heckman, J. D. (1992) · Biomaterials · doi:10.1016/0142-9612(92)90187-s · Cited by 75
Gel casting of resorbable polymers
Coombes, A. G. A., & Heckman, J. D. (1992) · Biomaterials · doi:10.1016/0142-9612(92)90053-q · Cited by 72
The Merit of Sintered PDLLA/TCP Composites in Management of Bone Fracture Internal Fixation
Lin, F., Chen, T., Lin, C., & Lee, C. (1999) · Artificial Organs · doi:10.1046/j.1525-1594.1999.06164.x · Cited by 60
New Developments in Cranial Suture Research
Warren, S. M., Greenwald, J. A., Spector, J. A., Bouletreau, P. J., Mehrara, B. J., & Longaker, M. T. (2001) · Plastic & Reconstructive Surgery · doi:10.1097/00006534-200102000-00034 · Cited by 58
The Future of Biodegradable Osteosyntheses
Cordewener, F. W., & Schmitz, J. P. (2000) · Tissue Engineering · doi:10.1089/107632700418119 · Cited by 48
A New Ti-5Ag Alloy for Customized Prostheses by Three-dimensional Printing (3DP™)
Hong, S.-B., Eliaz, N., Leisk, G. G., Sachs, E. M., Latanision, R. M., & Allen, S. M. (2001) · Journal of Dental Research · doi:10.1177/00220345010800030301 · Cited by 44
Cited by
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Porous scaffold design for tissue engineering
Hollister, S. J. (2005) · Nature Materials · doi:10.1038/nmat1421 · Cited by 3,969
Freezing as a Path to Build Complex Composites
Deville, S., Saiz, E., Nalla, R. K., & Tomsia, A. P. (2006) · Science · doi:10.1126/science.1120937 · Cited by 1,900
Controlling the Porosity and Microarchitecture of Hydrogels for Tissue Engineering
Annabi, N., Nichol, J. W., Zhong, X., Ji, C., Koshy, S., Khademhosseini, A., & Dehghani, F. (2010) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2009.0639 · Cited by 1,308
Freeze casting of hydroxyapatite scaffolds for bone tissue engineering
Deville, S., Saiz, E., & Tomsia, A. P. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.06.028 · Cited by 873
Metadata
- Authors
- Roy, T. D., Simon, J. L., Ricci, J. L., Rekow, E. D., Thompson, V. P., & Parsons, J. R.
- Venue
- Journal of Biomedical Materials Research Part A
- Publisher
- Wiley
- Published
- 2003-07-08
- Volume
- 66A
- Issue
- 2
- Pages
- 283-291
- ISSN
- 1549-3296 (ISSN-L)
- 1552-4965
- OpenAlex
- W2020594734
- Cited by
- 262
- References
- 30
- FWCI
- 4.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.