The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Development of a novel alginate‐polyvinyl alcohol‐hydroxyapatite hydrogel for 3D bioprinting bone tissue engineered scaffolds
Abstract
Three‐dimensional printed biomaterials used as personalized tissue substitutes have the ability to promote and enhance regeneration in areas of defected tissue. The challenge with 3D printing for bone tissue engineering remains the selection of a material with optimal rheological properties for printing in addition to biocompatibility and capacity for uniform cell incorporation. Hydrogel biomaterials may provide sufficient printability to allow cell encapsulation and bioprinting of scaffolds with uniform cell distribution. In this study, a novel alginate‐polyvinyl alcohol (PVA)‐hydroxyapatite (HA) hydrogel formulation with optimal rheological properties for 3D bioprinting of mouse calvaria 3T3‐E1 (MC3T3) cells into scaffolds of high shape fidelity has been developed. A systematic investigation was conducted to determine the effect of varying concentrations of alginate, phosphate, calcium, and the PVA‐HA suspension in the formulation on the resulting viscosity and thus printability of the hydrogel. HA, the main mineral component in natural bone, was incorporated into the hydrogel formulation to create a favorable bone‐forming environment due to its excellent osteoconductivity. Degradation studies in α‐MEM cell culture media showed that the 3D printed alginate‐PVA‐HA scaffolds remained in‐tact for 14 days. MC3T3 cells were well distributed and encapsulated throughout the optimal hydrogel formulation and expressed high viability through the completion of the 3D printing process. Thus, the development of this novel, osteoconductive, biodegradable, alginate‐PVA‐HA formulation and its ability to 3D bioprint tissue engineered scaffolds make it a promising candidate for treating personalized bone defects. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 1457–1468, 2017.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Biological interactions between polysaccharides and divalent cations: The egg‐box model
Grant, G. T., Morris, E. R., Rees, D. A., Smith, P. J. C., & Thom, D. (1973) · FEBS Letters · doi:10.1016/0014-5793(73)80770-7 · Cited by 2,889
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Bone tissue engineering using 3D printing
Bose, S., Vahabzadeh, S., & Bandyopadhyay, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.017 · Cited by 1,866
Alginate Hydrogels as Biomaterials
Augst, A. D., Kong, H. J., & Mooney, D. J. (2006) · Macromolecular Bioscience · doi:10.1002/mabi.200600069 · Cited by 1,839
3D bioprinting for engineering complex tissues
Mandrycky, C., Wang, Z., Kim, K., & Kim, D.-H. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2015.12.011 · Cited by 1,754
Biopolymer-Based Hydrogels As Scaffolds for Tissue Engineering Applications: A Review
Van Vlierberghe, S., Dubruel, P., & Schacht, E. (2011) · Biomacromolecules · doi:10.1021/bm200083n · Cited by 1,716
Scaffolding in tissue engineering: general approaches and tissue-specific considerations
Chan, B. P., & Leong, K. W. (2008) · European Spine Journal · doi:10.1007/s00586-008-0745-3 · Cited by 1,708
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
3D Printing of Scaffolds for Tissue Regeneration Applications
Do, A., Khorsand, B., Geary, S. M., & Salem, A. K. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500168 · Cited by 949
3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration
Inzana, J. A., Olvera, D., Fuller, S. M., Kelly, J. P., Graeve, O. A., Schwarz, E. M., Kates, S. L., & Awad, H. A. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.01.064 · Cited by 840
Bio-ink properties and printability for extrusion printing living cells
Chung, J. H. Y., Naficy, S., Yue, Z., Kapsa, R., Quigley, A., Moulton, S. E., & Wallace, G. G. (2013) · Biomaterials Science · doi:10.1039/c3bm00012e · Cited by 610
Skin tissue generation by laser cell printing
Koch, L., Deiwick, A., Schlie, S., Michael, S., Gruene, M., Coger, V., Zychlinski, D., Schambach, A., Reimers, K., Vogt, P. M., et al. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24455 · Cited by 609
Xu, T., Zhao, W., Zhu, J.-M., Albanna, M. Z., Yoo, J. J., & Atala, A. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2012.09.035 · Cited by 607
A Multimaterial Bioink Method for 3D Printing Tunable, Cell‐Compatible Hydrogels
Rutz, A. L., Hyland, K. E., Jakus, A. E., Burghardt, W. R., & Shah, R. N. (2015) · Advanced Materials · doi:10.1002/adma.201405076 · Cited by 572
Engineering alginate as bioink for bioprinting
Jia, J., Richards, D. J., Pollard, S., Tan, Y., Rodriguez, J., Visconti, R. P., Trusk, T. C., Yost, M. J., Yao, H., Markwald, R. R., et al. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.06.034 · Cited by 549
Mechanical properties and shape memory effect of 3D-printed PLA-based porous scaffolds
Senatov, F. S., Niaza, K. V., Zadorozhnyy, M. Y., Maksimkin, A. V., Kaloshkin, S. D., & Estrin, Y. Z. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.11.036 · Cited by 547
Ariga, K., Li, M., Richards, G. J., & Hill, J. P. (2011) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2011.3839 · Cited by 444
Compressive and shear properties of alginate gel: Effects of sodium ions and alginate concentration
LeRoux, M. A., Guilak, F., & Setton, L. A. (1999) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199910)47:1<46::aid-jbm6>3.0.co;2-n · Cited by 444
Hsieh, F.-Y., Lin, H.-H., & Hsu, S.-H. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.028 · Cited by 420
3D Printing of Calcium Phosphate Ceramics for Bone Tissue Engineering and Drug Delivery
Trombetta, R., Inzana, J. A., Schwarz, E. M., Kates, S. L., & Awad, H. A. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1678-3 · Cited by 377
Designing alginate hydrogels to maintain viability of immobilized cells
Kong, H. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00295-3 · Cited by 375
Ornamenting 3D printed scaffolds with cell-laid extracellular matrix for bone tissue regeneration
Pati, F., Song, T.-H., Rijal, G., Jang, J., Kim, S. W., & Cho, D.-W. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2014.10.012 · Cited by 361
Controlling Rigidity and Degradation of Alginate Hydrogels via Molecular Weight Distribution
Kong, H. J., Kaigler, D., Kim, K., & Mooney, D. J. (2004) · Biomacromolecules · doi:10.1021/bm049879r · Cited by 350
Bioprinting Endothelial Cells With Alginate for 3D Tissue Constructs
Khalil, S., & Sun, W. (2009) · Journal of Biomechanical Engineering · doi:10.1115/1.3128729 · Cited by 337
Kesti, M., Müller, M., Becher, J., Schnabelrauch, M., D’Este, M., Eglin, D., & Zenobi-Wong, M. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.033 · Cited by 294
Advancing the field of 3D biomaterial printing
Jakus, A. E., Rutz, A. L., & Shah, R. N. (2016) · Biomedical Materials · doi:10.1088/1748-6041/11/1/014102 · Cited by 203
Alginates as biomaterials in tissue engineering
Andersen, T., Strand, B. L., Formo, K., Alsberg, E., & Christensen, B. E. (2011) · Carbohydrate Chemistry · doi:10.1039/9781849732765-00227 · Cited by 190
Neufurth, M., Wang, X., Schröder, H. C., Feng, Q., Diehl-Seifert, B., Ziebart, T., Steffen, R., Wang, S., & Müller, W. E. G. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.07.002 · Cited by 185
Smart hydrogels for 3D bioprinting
Wang, S., Lee, J. M., & Yeong, W. Y. (2024) · International Journal of Bioprinting · doi:10.18063/ijb.2015.01.005 · Cited by 181
Influence of Calcium Ions on Cell Survival and Proliferation in the Context of an Alginate Hydrogel
Cao, T. N., Chen, D., & Schreyer, D. J. (2012) · ISRN Chemical Engineering · doi:10.5402/2012/516461 · Cited by 148
Rajkumar, M., Meenakshisundaram, N., & Rajendran, V. (2011) · Materials Characterization · doi:10.1016/j.matchar.2011.02.008 · Cited by 141
Bendtsen, S. T., & Wei, M. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb00072f · Cited by 114
Self-citationPersonalized development of human organs using 3D printing technology
Radenković, D., Solouk, A., & Seifalian, A. M. (2015) · Medical Hypotheses · doi:10.1016/j.mehy.2015.12.017 · Cited by 111
[15] Cell immobilization in calcium alginate
Bucke, C. (1987) · Methods in enzymology on CD-ROM/Methods in enzymology · doi:10.1016/0076-6879(87)35076-1 · Cited by 97
Luo, Y., Lode, A., Sonntag, F., Nies, B. A., & Gelinsky, M. (2013) · Journal of Materials Chemistry B · doi:10.1039/c3tb20511h · Cited by 96
HA/alginate hybrid composites prepared through bio-inspired nucleation
Tampieri, A., Sandri, M., Landi, E., Celotti, G., Roveri, N., Mattioli‐Belmonte, M., Virgili, L., Gabbanelli, F., & Biagini, G. (2005) · Acta Biomaterialia · doi:10.1016/j.actbio.2005.01.001 · Cited by 93
Development of Novel Three-Dimensional Printed Scaffolds for Osteochondral Regeneration
Holmes, B. B., Zhu, W., Li, J., Lee, J. D., & Zhang, L. G. (2014) · Tissue Engineering Part A · doi:10.1089/ten.tea.2014.0138 · Cited by 92
Kramer, E. R., Morey, A. M., Staruch, M. L., Suib, S. L., Jain, M., Budnick, J. I., & Wei, M. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6779-2 · Cited by 65
Self-citationRheological and swelling properties of alginate gels
Segeren, A. J. M., Boskamp, J. V., & van den Tempel, M. (1974) · Faraday Discussions of the Chemical Society · doi:10.1039/dc9745700255 · Cited by 55
Preparation and characterization of an injectable composite
Tan, R., Niu, X., Gan, S., & Feng, Q. (2009) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-009-3692-6 · Cited by 54
3D printing for regenerative medicine: From bench to bedside
Li, J., He, L., Zhou, C., Zhou, Y., Bai, Y., Lee, F. Y., & Mao, J. J. (2015) · MRS Bulletin · doi:10.1557/mrs.2015.5 · Cited by 52
Algal polysaccharide capsule-templated growth of magnetic nanoparticles
Brayner, R., Coradin, T., Fiévet-Vincent, F., Livage, J., & Fiévet, F. (2005) · New Journal of Chemistry · doi:10.1039/b419063g · Cited by 34
Cited by
Recent advances in biomaterials for 3D scaffolds: A review
Nikolova, M. P., & Chavali, M. S. (2019) · Bioactive Materials · doi:10.1016/j.bioactmat.2019.10.005 · Cited by 907
Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies
Chimene, D., Kaunas, R., & Gaharwar, A. K. (2020) · Advanced Materials · doi:10.1002/adma.201902026 · Cited by 600
Review of alginate-based hydrogel bioprinting for application in tissue engineering
Rastogi, P., & Kandasubramanian, B. (2019) · Biofabrication · doi:10.1088/1758-5090/ab331e · Cited by 564
Bioinks and bioprinting technologies to make heterogeneous and biomimetic tissue constructs
Ashammakhi, N., Ahadian, S., Xu, C., Montazerian, H., Ko, H., Nasiri, R., Barros, N., & Khademhosseini, A. (2019) · Materials Today Bio · doi:10.1016/j.mtbio.2019.100008 · Cited by 549
Unagolla, J. M., & Jayasuriya, A. C. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2019.100479 · Cited by 544
Metadata
- Authors
- Bendtsen, S. T., Quinnell, S. P., & Wei, M.
- Venue
- Journal of Biomedical Materials Research Part A
- Publisher
- Wiley
- Published
- 2017-02-25
- Volume
- 105
- Issue
- 5
- Pages
- 1457-1468
- ISSN
- 1549-3296 (ISSN-L)
- 1552-4965
- OpenAlex
- W2643182548
- Cited by
- 329
- References
- 43
- FWCI
- 12.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.