The DOI matches its Crossref record; 61 of the 61 references it cites were found in a registry or an index.
Direct‐write bioprinting three‐dimensional biohybrid systems for future regenerative therapies
Open accessAbstract
Regenerative medicine seeks to repair or replace dysfunctional tissues with engineered biological or biohybrid systems. Current clinical regenerative models utilize simple uniform tissue constructs formed with cells cultured onto biocompatible scaffolds. Future regenerative therapies will require the fabrication of complex three‐dimensional constructs containing multiple cell types and extracellular matrices. We believe bioprinting technologies will provide a key role in the design and construction of future engineered tissues for cell‐based and regenerative therapies. This review describes the current state‐of‐the‐art bioprinting technologies, focusing on direct‐write bioprinting. We describe a number of process and device considerations for successful bioprinting of composite biohybrid constructs. In addition, we have provided baseline direct‐write printing parameters for a hydrogel system (Pluronic F127) often used in cardiovascular applications. Direct‐write dispensed lines (gels with viscosities ranging from 30 mPa s to greater than 600 × 10 6 mPa s) were measured following mechanical and pneumatic printing via three commercially available needle sizes (20 ga, 25 ga, and 30 ga). Example patterns containing microvascular cells and isolated microvessel fragments were also bioprinted into composite 3D structures. Cells and vessel fragments remained viable and maintained in vitro behavior after incorporation into biohybrid structures. Direct‐write bioprinting of biologicals provides a unique method to design and fabricate complex, multicomponent 3D structures for experimental use. We hope our design insights and baseline parameter descriptions of direct‐write bioprinting will provide a useful foundation for colleagues to incorporate this 3D fabrication method into future regenerative therapies. © 2011 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2011.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
RETRACTED: Clinical transplantation of a tissue-engineered airway
Macchiarini, P., Jungebluth, P., Go, T., Asnaghi, M. A., Rees, L. E., Cogan, T. A., Dodson, A., Martorell, J., Bellini, S., Parnigotto, P. P., et al. (2008) · The Lancet · doi:10.1016/s0140-6736(08)61598-6 · Cited by 1,433
RetractedTissue-engineered autologous bladders for patients needing cystoplasty
Atala, A., Bauer, S. B., Soker, S., Yoo, J. J., & Retik, A. B. (2006) · The Lancet · doi:10.1016/s0140-6736(06)68438-9 · Cited by 1,833
Fundamentals of microfabrication : the science of miniaturization
Madou, M. J. (2002) · Cited by 1,593
Patterning proteins and cells using soft lithography
Kane, R. (1999) · Biomaterials · doi:10.1016/s0142-9612(99)00165-9 · Cited by 1,490
Scaffold-free vascular tissue engineering using bioprinting
Norotte, C., Marga, F. S., Niklason, L. E., & Forgacs, G. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.034 · Cited by 1,339
In situ-forming hydrogels--review of temperature-sensitive systems
Ruel-Gariépy, E., & Leroux, J.-C. (2004) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2004.03.019 · Cited by 1,297
Organ printing: Tissue spheroids as building blocks
Mironov, V., Visconti, R. P., Kasyanov, V., Forgacs, G., Drake, C. J., & Markwald, R. R. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.084 · Cited by 1,238
Inkjet printing of viable mammalian cells
Xu, T., Jin, J., Gregory, C., Hickman, J. J., & Boland, T. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.04.011 · Cited by 1,035
Bryant, S. J., Nuttelman, C. R., & Anseth, K. S. (2000) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856200743805 · Cited by 774
Influence of Fluid Physical Properties on Ink-Jet Printability
Jang, D., Kim, D., & Moon, J. (2009) · Langmuir · doi:10.1021/la900059m · Cited by 745
Introduction to physical polymer science
Sherrington, D. C. (1993) · Reactive Polymers · doi:10.1016/0923-1137(93)90096-x · Cited by 663
Sobral, J. M., Caridade, S. G., Sousa, R. A., Mano, J. F., & Reis, R. L. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.11.003 · Cited by 561
Chang, R., Nam, J., & Sun, W. (2008) · Tissue Engineering Part A · doi:10.1089/ten.a.2007.0004 · Cited by 549
Electrospinning collagen and elastin: preliminary vascular tissue engineering
Boland, E. (2004) · Frontiers in Bioscience · doi:10.2741/1313 · Cited by 537
Self-citationCell and organ printing 1: Protein and cell printers
Wilson, W. C., & Boland, T. (2003) · The Anatomical Record Part A: Discoveries in Molecular, Cellular, and Evolutionary Biology · doi:10.1002/ar.a.10057 · Cited by 531
High-throughput laser printing of cells and biomaterials for tissue engineering
Guillemot, F., Souquet, A., Catros, S., Guillotin, B., Lopez, J., Faucon, M., Pippenger, B., Bareille, R., Rémy, M., Bellance, S., et al. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.09.029 · Cited by 475
Skardal, A., Zhang, J., & Prestwich, G. D. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.045 · Cited by 461
Duan, B., Wang, M., Zhou, W. Y., Cheung, W. L., Li, Z. Y., & Lu, W. W. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.06.024 · Cited by 420
Applications of thermo-reversible pluronic F-127 gels in pharmaceutical formulations.
Escobar‐Chávez, J. J., López-Cervantes, M., Naik, A., Kalia, Y. N., Quintanar‐Guerrero, D., & Ganem-Quintanar, A. (2006) · PubMed · Cited by 406
Tissue Engineering by Self-Assembly of Cells Printed into Topologically Defined Structures
Jakab, K., Norotte, C., Damon, B., Marga, F., Neagu, A., Besch-Williford, C. L., Kachurin, A., Church, K. H., Park, H., Mironov, V., et al. (2008) · Tissue Engineering Part A · doi:10.1089/tea.2007.0173 · Cited by 378
Three-Dimensional BioAssembly Tool for Generating Viable Tissue-Engineered Constructs
Smith, C. M., Stone, A. L., Parkhill, R. L., Stewart, R. L., Simpkins, M. W., Kachurin, A. M., Warren, W. L., & Williams, S. K. (2004) · Tissue Engineering · doi:10.1089/1076327042500274 · Cited by 373
Self-citationDirect Freeform Fabrication of Seeded Hydrogels in Arbitrary Geometries
Cohen, D. L., Malone, E., Lipson, H., & Bonassar, L. J. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.1325 · Cited by 360
Novel collagen scaffolds with predefined internal morphology made by solid freeform fabrication
Sachlos, E. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00528-8 · Cited by 350
Lee, W., Lee, V., Polio, S., Keegan, P., Lee, J., Fischer, K., Park, J., & Yoo, S. (2010) · Biotechnology and Bioengineering · doi:10.1002/bit.22613 · Cited by 289
Park, S. A., Lee, S. H., & Kim, W. D. (2011) · Bioprocess and Biosystems Engineering · doi:10.1007/s00449-010-0499-2 · Cited by 284
Tissue Engineering by Self-Assembly of Cells Printed into Topologically Defined Structures
Jakab, K., Norotte, C., Damon, B., Marga, F., Neagu, A., Besch-Williford, C. L., Kachurin, A., Church, K. H., Park, H., Mironov, V., et al. (2007) · Tissue Engineering · doi:10.1089/ten.2007.0173 · Cited by 273
Scaffold fabrication by indirect three-dimensional printing
Lee, M., Dunn, J. C. Y., & Wu, B. M. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.10.040 · Cited by 267
Angiogenesis in Calcium Phosphate Scaffolds by Inorganic Copper Ion Release
Barralet, J., Gbureck, U., Habibovic, P., Vorndran, E., Gerard, C., & Doillon, C. J. (2009) · Tissue Engineering Part A · doi:10.1089/ten.tea.2007.0370 · Cited by 244
Hydrogels used for cell‐based drug delivery
Schmidt, J. J., Rowley, J., & Kong, H. J. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32287 · Cited by 228
Mondrinos, M. J., Dembzynski, R., Lu, L., Byrapogu, V. K. C., Wootton, D. M., Lelkes, P. I., & Zhou, J. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.03.049 · Cited by 225
Mechanical properties of electrospun fibrinogen structures
McManus, M. C., Boland, E. D., Koo, H. P., Barnes, C. P., Pawlowski, K. J., Wnek, G. E., Simpson, D. G., & Bowlin, G. L. (2006) · Acta Biomaterialia · doi:10.1016/j.actbio.2005.09.008 · Cited by 188
Self-citationEngineering the Microcirculation
Lokmic‐Tomkins, Z., & Mitchell, G. M. (2008) · Tissue Engineering Part B Reviews · doi:10.1089/teb.2007.0299 · Cited by 171
Electrospun fibrinogen: Feasibility as a tissue engineering scaffold in a rat cell culture model
McManus, M. C., Boland, E. D., Simpson, D. G., Barnes, C. P., & Bowlin, G. L. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30989 · Cited by 170
Self-citationAngiogenic potential of microvessel fragments established in three-dimensional collagen gels
Hoying, J. B., Boswell, C. A., & Williams, S. K. (1996) · In Vitro Cellular & Developmental Biology - Animal · doi:10.1007/bf02723003 · Cited by 164
Self-citationInosculation: Connecting the Life-Sustaining Pipelines
Laschke, M. W., Vollmar, B., & Menger, M. D. (2009) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2009.0252 · Cited by 163
Three-dimensional bioprinting of rat embryonic neural cells
Lee, W., Pinckney, J., Lee, V., Lee, J.-H., Fischer, K., Polio, S., Park, J.-K., & Yoo, S.-S. (2009) · NeuroReport · doi:10.1097/wnr.0b013e32832b8be4 · Cited by 162
Rapid Perfusion and Network Remodeling in a Microvascular Construct After Implantation
Shepherd, B. R., Chen, H. Y. S., Smith, C. M., Gruionu, G., Williams, S. K., & Hoying, J. B. (2004) · Arteriosclerosis, Thrombosis, and Vascular Biology · doi:10.1161/01.atv.0000124103.86943.1e · Cited by 159
Self-citationDevelopment of 3D PPF/DEF scaffolds using micro-stereolithography and surface modification
Lan, P. X., Lee, J. W., Seol, Y., & Cho, D. (2008) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-008-3567-2 · Cited by 154
Microreplication and Design of Biological Architectures Using Dynamic‐Mask Multiphoton Lithography
Nielson, R., Kaehr, B., & Shear, J. B. (2008) · Small · doi:10.1002/smll.200801084 · Cited by 139
Sabnis, A., Rahimi, M., Chapman, C., & Nguyen, K. T. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32194 · Cited by 126
A three-dimensional scaffold with precise micro-architecture and surface micro-textures
Mata, Á., Kim, E. J., Boehm, C., Fleischman, A. J., Muschler, G. F., & Roy, S. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.05.023 · Cited by 126
Singh, A. K., Suri, S., & Roy, K. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.001 · Cited by 124
Shanjani, Y., Croos, J. N. A. D., Pilliar, R. M., et al. (2010) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31610 · Cited by 121
Interface‐Directed Self‐Assembly of Cell‐Laden Microgels
Zamanian, B., Masaeli, M., Nichol, J. W., Khabiry, M., HANCOCK, M. J., Bae, H., & Khademhosseini, A. (2010) · Small · doi:10.1002/smll.200902326 · Cited by 118
Smith, C. M., Christian, J. J., Warren, W. L., & Williams, S. K. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0101 · Cited by 116
Self-citationThree-dimensional tissue constructs built by bioprinting
Jakab, K., Damon, B. J., Neagu, A., Kachurin, A., & Forgács, G. (2006) · Biorheology · doi:10.1177/0006355x2006043003004033 · Cited by 114
Erythropoietin Stimulates Vasculogenesis in Neonatal Rat Mesenteric Microvascular Endothelial Cells
Ashley, R. A., Dubuque, S. H., Dvořák, B., Woodward, S. S., Williams, S. K., & Kling, P. J. (2002) · Pediatric Research · doi:10.1203/00006450-200204000-00012 · Cited by 103
Self-citationMicroscale multilayer cocultures for biomimetic blood vessels
Tan, W., & Desai, T. A. (2004) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30182 · Cited by 103
Li, M. G., Tian, X. Y., & Chen, D. (2009) · Biofabrication · doi:10.1088/1758-5082/1/3/032001 · Cited by 102
Dellinger, J. G., Cesarano, J., & Jamison, R. D. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31072 · Cited by 101
Trkov, S., Eng, G. M., Liddo, R. D., Parnigotto, P. P., & Vunjak‐Novakovic, G. (2009) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.231 · Cited by 99
Biosurface engineering through ink jet printing
Khan, M. S., Fon, D., Li, X., Tian, J., Forsythe, J. S., Garnier, G., & Shen, W. (2009) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2009.09.032 · Cited by 93
Cimetta, E., Pizzato, S., Bollini, S., Serena, E., Coppi, P. D., & Elvassore, N. (2008) · Biomedical Microdevices · doi:10.1007/s10544-008-9245-9 · Cited by 86
Jay, S. M., Shepherd, B. R., Andrejecsk, J. W., Kyriakides, T. R., Pober, J. S., & Saltzman, W. M. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.01.014 · Cited by 85
Yoon, J. J., Chung, H. J., & Park, T. G. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31271 · Cited by 84
Bioactivation of collagen matrices through sustained VEGF release from PLGA microspheres
Borselli, C., Ungaro, F., Oliviero, O., d’Angelo, I., Quaglia, F., Rotonda, M. I. L., & Netti, P. A. (2009) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32332 · Cited by 77
Giraud, M., Ayuni, E., Cook, S., Siepe, M., Carrel, T. P., & Tevaearai, H. T. (2008) · Artificial Organs · doi:10.1111/j.1525-1594.2008.00595.x · Cited by 74
Surface‐directed assembly of cell‐laden microgels
Du, Y., Ghodousi, M., Lo, E., Vidula, M. K., Emiroglu, O., & Khademhosseini, A. (2009) · Biotechnology and Bioengineering · doi:10.1002/bit.22552 · Cited by 64
Clause, K. C., Tinney, J. P., Liu, L., Keller, B. B., & Tobita, K. (2009) · Tissue Engineering Part A · doi:10.1089/ten.tea.2008.0169 · Cited by 43
Directed Three-Dimensional Growth of Microvascular Cells and Isolated Microvessel Fragments
Chang, C. C., & Hoying, J. B. (2006) · Cell Transplantation · doi:10.3727/000000006783981693 · Cited by 20
Self-citationAbdominal Wall Reconstruction Using Biological Tissue Grafts
Brown, P. D. (2009) · AORN Journal · doi:10.1016/j.aorn.2009.05.024 · Cited by 20
Cited by
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
3D bioprinting for engineering complex tissues
Mandrycky, C., Wang, Z., Kim, K., & Kim, D.-H. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2015.12.011 · Cited by 1,754
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Metadata
- Authors
- Chang, C. C., Boland, E. D., Williams, S. K., & Hoying, J. B.
- Venue
- Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Publisher
- Wiley
- Published
- 2011-04-18
- Volume
- 98B
- Issue
- 1
- Pages
- 160-170
- ISSN
- 1552-4973 (ISSN-L)
- 1552-4981
- OpenAlex
- W2068553712
- Cited by
- 445
- References
- 61
- FWCI
- 6.75
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.