CoChat

Generating Triple Crystalline Superstructures in Melt Miscible PEO‐ b ‐PCL‐ b ‐PLLA Triblock Terpolymers by Controlling Thermal History and Sequential Crystallization

Open access

The DOI matches its Crossref record; 85 of the 85 references it cites were found in a registry or an index.

Abstract

The morphology, crystallization behavior, and properties of multi‐crystalline polymer systems based on triple crystalline biodegradable PEO‐ b ‐PCL‐ b ‐PLLA triblock terpolymers are reviewed. The triblock terpolymers, with increasing poly( l ‐lactide) (PLLA) content, exhibit a triple crystalline nature. Upon cooling from melt, the PLLA block crystallizes first and templates the spherulitic morphology of the terpolymer. Then, the poly(ε‐caprolactone) (PCL) block crystalizes and, finally, the poly(ethylene oxide) (PEO) block. These triblock terpolymers are melt miscible according to small angle X‐ray scattering (SAXS) results. Thus, the crystallization of PCL and PEO blocks takes place within the interlamellar zones of the PLLA spherulites that are formed previously. Therefore, the lamellae of PLLA, PCL, and PEO exist side‐by‐side within a unique spherulite, constituting a novel triple crystalline superstructure. The theoretical analysis of SAXS curves implies that only one lamella of either PCL or PEO can occupy the interlamellar space in between two contiguous lamellae of PLLA. Several complex competitive effects such as plasticizing, nucleation, anti‐plasticizing, and confinement take place during the isothermal crystallization of each block in the terpolymers. New results on how successive self‐nucleation and annealing thermal treatment can be used as an additional suitable technique to properly separate the three crystalline phases in these triple crystalline triblock terpolymers are also included.

Overview

Integrity signals

Registry

Crossref · 10.1002/macp.201900292

Cites

85 of 85 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Research works printed but not linked: 3

  1. Ge H., 2019, Acta Polym. Sin., 50, 82
  2. Müller A. J., 2015, Poly(lactic acid) Science and Technology: Processing, Properties, Additives and Applications, 66
  3. 10.1021/acs.macromol.5b02042 · DOI · Paper page

Cited by

See all 16

Metadata

Authors
Palacios, J. K., Liu, G., Wang, D., Hadjichristidis, N., & Müller, A. J.
Affiliations
  • University of the Basque Country (ES)
  • Chinese Academy of Sciences (CN)
  • King Abdullah University of Science and Technology (SA)
  • Ikerbasque (ES)
Corresponding author
  • Hadjichristidis, Nikos
  • Müller, Alejandro J.
Venue
Macromolecular Chemistry and Physics
Publisher
Wiley
Published
2019-09-10
Volume
220
Issue
20
ISSN
  • 1022-1352 (ISSN-L)
  • 1521-3935
OpenAlex
W2972641901
Cited by
15
References
84
Citations by year
2026: 2 · 2025: 1 · 2024: 1 · 2023: 3 · 2022: 4 · 2021: 2 · 2020: 2
FWCI
0.85
Type
journal article
Language
en
Open access
Locations
  • Macromolecular Chemistry and Physics (publishedVersion)
  • Communities in ADDI (University of the Basque Country) (submittedVersion, other-oa)
  • LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas) (submittedVersion)
  • Hispana (submittedVersion, other-oa)
  • King Abdullah University of Science and Technology Repository (King Abdullah University of Science and Technology) (submittedVersion)
Funders
  • Ministerio de Economía y Competitividad (MAT2017‐83014‐C2‐1‐P)
  • Horizon 2020
  • H2020 Marie Skłodowska-Curie Actions (778092)
Topics
  • Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
  • Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
  • Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
Keywords
sequential crystallization, spherulitic morphology, melt miscibility, biodegradable polymers, poly(L-lactic acid), PCL, poly(ethylene oxide), interlamellar space, nucleation, confinement effects, annealing, thermal history, isothermal crystallization

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.