The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Kinetics of thermal degradation of char‐forming plastics from thermogravimetry. Application to a phenolic plastic
Abstract
A technique was devised for obtaining rate laws and kinetic parameters which describe the thermal degradation of plastics from TGA data. The method is based on the inter‐comparison of experiments which were performed at different linear rates of heating. By this method it is possible to determine the activation energy of certain professes without knowing the form of the kinetic equation. This technique was applied to fiberglass‐reinforced CTL 91‐LD phenolic resin, where the rate law ‐ (1/we)(dw/dt) = 10 18 e−55,000/RT [(w ‐ wf)/w0,]5, nr.−1, was found to apply to a major part of the degradation. The equation was successfully tested by several techniques, including a comparison with constant temperature data that were available in the literature. The activation energy was thought to be correct within 10 kcal.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Freeman, E. S., & Carroll, B. (1958) · The Journal of Physical Chemistry · doi:10.1021/j150562a003 · Cited by 1,780
Kinetic analysis of thermogravimetric data
Doyle, C. D. (1961) · Journal of Applied Polymer Science · doi:10.1002/app.1961.070051506 · Cited by 1,357
Tables of functions with formulae and curves
Jahnke, E. (1945) · UCLA Biblioteca de Ingenieria Civil · Cited by 436
The kinetics of the thermal degradation of polystyrene and polyethylene
Anderson, D. A., & Freeman, E. S. (1961) · Journal of Polymer Science · doi:10.1002/pol.1961.1205415920 · Cited by 346
Cited by
Vyazovkin, S., Burnham, A. K., Criado, J. M., Pérez-Maqueda, L. A., Popescu, C., & Sbirrazzuoli, N. (2011) · Thermochimica Acta · doi:10.1016/j.tca.2011.03.034 · Cited by 5,961
Lignocellulosic biomass pyrolysis mechanism: A state-of-the-art review
Wang, S., Dai, G., Yang, H., & Luo, Z. (2017) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2017.05.004 · Cited by 2,595
Starink, M. J. (2003) · Thermochimica Acta · doi:10.1016/s0040-6031(03)00144-8 · Cited by 1,938
Thermal stability and flame retardancy of polyurethanes
Chattopadhyay, D. K., & Webster, D. C. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.06.002 · Cited by 1,748
Mechanistic implications of plastic degradation
Singh, B., & Sharma, N. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.11.008 · Cited by 1,569
A comprehensive review on the pyrolysis of lignocellulosic biomass
Dhyani, V., & Bhaskar, T. (2018) · Renewable Energy · doi:10.1016/j.renene.2017.04.035 · Cited by 1,545
Solution Combustion Synthesis of Nanoscale Materials
Varma, A., Mukasyan, A. S., Rogachev, A. S., & Manukyan, K. V. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00279 · Cited by 1,453
Model-free and model-fitting approaches to kinetic analysis of isothermal and nonisothermal data
Vyazovkin, S., & Wight, C. A. (1999) · Thermochimica Acta · doi:10.1016/s0040-6031(99)00253-1 · Cited by 1,415
White, J. E., Catallo, W. J., & Legendre, B. L. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.01.004 · Cited by 1,232
Vyazovkin, S. (2001) · Journal of Computational Chemistry · doi:10.1002/1096-987x(20010130)22:2<178::aid-jcc5>3.0.co;2-# · Cited by 1,144
Isoconversional Kinetic Analysis of Thermally Stimulated Processes in Polymers
Vyazovkin, S., & Sbirrazzuoli, N. (2006) · Macromolecular Rapid Communications · doi:10.1002/marc.200600404 · Cited by 1,116
Yao, F., Wu, Q., Lei, Y., Guo, W., & Xu, Y. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.10.012 · Cited by 887
Aboulkas, A., El harfi, K., & El Bouadili, A. (2010) · Energy Conversion and Management · doi:10.1016/j.enconman.2009.12.017 · Cited by 726
A chemical kinetic model of vitrinite maturation and reflectance
Burnham, A. K., & Sweeney, J. J. (1989) · Geochimica et Cosmochimica Acta · doi:10.1016/0016-7037(89)90136-1 · Cited by 659
Gotor, F. J., Criado, J. M., Malek, J., & Koga, N. (2000) · The Journal of Physical Chemistry A · doi:10.1021/jp0022205 · Cited by 659
Review of polymer oxidation and its relationship with materials performance and lifetime prediction
Celina, M. C. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.06.024 · Cited by 595
Vyazovkin, S., & Wight, C. A. (1997) · Annual Review of Physical Chemistry · doi:10.1146/annurev.physchem.48.1.125 · Cited by 544
Sharifzadeh, M., Sadeqzadeh, M., Guo, M., Borhani, T. N., Murthy Konda, N. V. S. N., Garcia, M. C., Wang, L., Hallett, J., & Shah, N. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.10.006 · Cited by 473
Cai, J., Xu, D., Dong, Z., Yu, X., Yang, Y., Banks, S. W., & Bridgwater, A. V. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.09.113 · Cited by 406
Thermal degradation of poly(methyl methacrylate) (PMMA): modelling of DTG and TG curves
Ferriol, M., Gentilhomme, A., Cochez, M., Oget, N., & Mieloszynski, J. L. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00291-4 · Cited by 392
ICTAC Kinetics Committee recommendations for analysis of thermal decomposition kinetics
Koga, N., Vyazovkin, S., Burnham, A. K., Favergeon, L., Muravyev, N. V., Pérez-Maqueda, L. A., Saggese, C., & Sánchez-Jiménez, P. E. (2023) · Thermochimica Acta · doi:10.1016/j.tca.2022.179384 · Cited by 378
Wang, D.-M., Xin, H.-H., Qi, X.-Y., Dou, G.-L., Qi, G.-S., & Ma, L.-Y. (2016) · Combustion and Flame · doi:10.1016/j.combustflame.2015.10.019 · Cited by 377
Xu, F., Wang, B., Yang, D., Hao, J., Qiao, Y., & Tian, Y. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.06.047 · Cited by 372
Transparent glass-ceramics functionalized by dispersed crystals
Liu, X., Zhou, J., Zhou, S., Yue, Y., & Qiu, J. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.02.006 · Cited by 362
A systematic study of the kinetics of lignin pyrolysis
Jiang, G., Nowakowski, D. J., & Bridgwater, A. V. (2010) · Thermochimica Acta · doi:10.1016/j.tca.2009.10.003 · Cited by 352
Kinetic studies on the pyrolysis of chitin and chitosan
Wanjun, T., Cunxin, W., & Donghua, C. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.08.006 · Cited by 324
Cellulose Pyrolysis Kinetics: Revisited
Antal, M. J., Várhegyi, G., & Jakab, E. (1998) · Industrial & Engineering Chemistry Research · doi:10.1021/ie970144v · Cited by 323
Khawam, A., & Flanagan, D. R. (2006) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.20559 · Cited by 320
Pyrolysis of orange waste: A thermo-kinetic study
Lopez-Velazquez, M. A., Santes, V., Balmaseda, J., & Torres-Garcia, E. (2013) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2012.09.016 · Cited by 297
Lewan, M. D., & Ruble, T. E. (2002) · Organic Geochemistry · doi:10.1016/s0146-6380(02)00182-1 · Cited by 270
Cure kinetics of the ring‐opening metathesis polymerization of dicyclopentadiene
Kessler, M. R., & White, S. R. (2002) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.10317 · Cited by 269
Thermal degradation kinetics of plastics and model selection
Das, P., & Tiwari, P. (2017) · Thermochimica Acta · doi:10.1016/j.tca.2017.06.001 · Cited by 265
Biomass pyrolysis technologies for value-added products: a state-of-the-art review
Amenaghawon, A. N., Anyalewechi, C. L., Okieimen, C. O., & Kusuma, H. S. (2021) · Environment, Development and Sustainability · doi:10.1007/s10668-021-01276-5 · Cited by 260
Discernment of synergism in pyrolysis of biomass blends using thermogravimetric analysis
Mallick, D., Poddar, M. K., Mahanta, P., & Moholkar, V. S. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.04.011 · Cited by 256
Zou, H., Yi, C., Wang, L., Liu, H., & Xu, W. (2009) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-009-0121-5 · Cited by 255
Crystallization of amorphous calcium carbonate
Koga, N., Nakagoe, Y., & Tanaka, H. (1998) · Thermochimica Acta · doi:10.1016/s0040-6031(98)00348-7 · Cited by 251
A review of thermochemical conversion of microalgae
Marcilla, A., Catalá, L., García-Quesada, J. C., Valdés, F. J., & Hernández, M. R. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.06.032 · Cited by 202
Conesa, J. A., Marcilla, A., Caballero, J. A., & Font, R. (2001) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(00)00130-3 · Cited by 167
Moriana, R., Zhang, Y., Mischnick, P., Li, J., & Ek, M. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.01.086 · Cited by 87
Maaoui, A., Ben Hassen Trabelsi, A., Ben Abdallah, A., Chagtmi, R., Lopez, G., Cortazar, M., & Olazar, M. (2023) · Journal of the Energy Institute · doi:10.1016/j.joei.2023.101242 · Cited by 69
Koga, N., Kasahara, D., & Kimura, T. (2013) · Crystal Growth & Design · doi:10.1021/cg400350w · Cited by 63
Model free kinetic analysis of biomass/sorbent blends for gasification purposes
Mabuda, A. I., Mamphweli, N. S., & Meyer, E. L. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.07.038 · Cited by 61
Hu, Q., Zhang, H., Mao, Q., Zhu, J., Zhang, S., Yang, H., & Chen, H. (2024) · Energy · doi:10.1016/j.energy.2024.130339 · Cited by 48
Samuelsson, L. N., Moriana, R., Babler, M. U., Ek, M., & Engvall, K. (2015) · Fuel · doi:10.1016/j.fuel.2014.11.079 · Cited by 41
“The two isoconversional methods adopted in this work are the differential method originally proposed by Friedman [21] and the incremental integral method introduced by Vyazovkin [22].”
MethodHivechi, A., Bahrami, S. H., Siegel, R. A., Siehr, A., Sahoo, A., Milan, P. B., Joghataei, M. T., Amoupour, M., & Simorgh, S. (2021) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.111855 · Cited by 38
Thermochemical treatment of olive mill solid waste and olive mill wastewater: Pyrolysis kinetics
Guida, M. Y., Bouaik, H., Tabal, A., Hannioui, A., Solhy, A., Barakat, A., Aboulkas, A., & El harfi, K. (2016) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-015-5061-7 · Cited by 36
Li, J., & Wu, D. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.02.123 · Cited by 36
Janković, B. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2011.07.080 · Cited by 36
Samuelsson, L. N., Babler, M. U., & Moriana, R. (2015) · Fuel · doi:10.1016/j.fuel.2015.08.019 · Cited by 29
Castaldi, M. J., & Kwon, E. (2007) · International Journal of Green Energy · doi:10.1080/15435070601015478 · Cited by 23
Wu, S., Shen, D., Hu, J., Zhang, H., & Xiao, R. (2014) · BioResources · doi:10.15376/biores.9.2.2259-2273 · Cited by 22
“Tihay et al. (2011) and Friedman (1964) have successfully used this method to evaluate the effect of oxygen concentration on cellulose wadding and plastic.”
MethodSamuelsson, L. N., Babler, M. U., Brännvall, E., & Moriana, R. (2016) · Fuel Processing Technology · doi:10.1016/j.fuproc.2016.04.029 · Cited by 23
Thermal Degradation Effects on Polyurethanes and Their Nanocomposites
Navarro‐Baena, I., Arrieta, M. P., Mujica‐Garcia, A., Sessini, V., Lopez, D., Kenny, J. M., & Peponi, L. (2015) · Reactions and Mechanisms in Thermal Analysis of Advanced Materials · doi:10.1002/9781119117711.ch7 · Cited by 8
Metadata
- Authors
- Friedman, H. L.
- Venue
- Journal of Polymer Science Part C: Polymer Symposia
- Publisher
- Wiley
- Published
- 1964-01
- Volume
- 6
- Issue
- 1
- Pages
- 183-195
- ISSN
- 0449-2994 (ISSN-L)
- 1935-3065
- OpenAlex
- W2084777440
- Cited by
- 3,898
- References
- 4
- FWCI
- 1.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.