Empirical atomic sensitivity factors for quantitative analysis by electron spectroscopy for chemical analysis
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Quantitative information from electron spectroscopy for chemical analysis requires the use of suitable atomic sensitivity factors. An empirical set has been developed, based upon data from 135 compounds of 62 elements. Data upon which the factors are based are intensity ratios of spectral lines with F1s as a primary standard, value unity, and K2p 3/2 as a secondary standard. The data were obtained on two instruments, the Physical Electronics 550 and the Varian IEE‐15, two instruments that use electron retardation for scanning, with constant pass energy. The agreement in data from the two instruments on the same compounds is good. How closely the data can apply to instruments with input lens systems is not known. Calculated cross‐section data plotted against binding energy on a log‐log plot provide curves composed of simple linear segments for the strong lines: 1s, 2p 3/2 , 3d 5/2 and 4f 7/2 . Similarly, the plots for the secondary lines, 2s, 3p 3/2 , 4d 5/2 and 5d 5/2 , are shown to be composed of linear segments. Theoretical sensitivity factors relative to F1s should fall on similar curves, with minor correction for the combined energy dependence of instrumental transmission and mean free path. Experimental intensity ratios relative to F1s were plotted similarly, and best fit curves were calculated using the shapes of the theoretical curves as a guide. The intercepts of these best fit curves with appropriate binding energies provide sensitivity factors for the strong lines and the secondary lines for all of the elements except the rare earths and the first series of transition metals. For these elements the sensitivity factors are lower than expected, and variable, because of multi‐electron processes that vary with chemical state. From the data it can be shown that many of the commonly‐accepted calculated cross‐section data must be significantly in error—as much as 40% in some cases for the strong lines, and far more than that for some of the secondary lines.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Handbook of X-Ray Photoelectron Spectroscopy
Moulder, J. F. (1995) · Medical Entomology and Zoology · Cited by 23,662
Hartree-Slater subshell photoionization cross-sections at 1254 and 1487 eV
Scofield, J. H. (1976) · Journal of Electron Spectroscopy and Related Phenomena · doi:10.1016/0368-2048(76)80015-1 · Cited by 5,981
Quantitative chemical analysis by ESCA
Penn, D. R. (1976) · Journal of Electron Spectroscopy and Related Phenomena · doi:10.1016/0368-2048(76)85004-9 · Cited by 1,033
Attenuation lengths of low-energy electrons in solids
Powell, C. J. (1974) · Surface Science · doi:10.1016/0039-6028(74)90091-0 · Cited by 734
Relative intensities in photoelectron spectroscopy of atoms and molecules
Reilman, R. F., Msezane, A., & Manson, S. T. (1976) · Journal of Electron Spectroscopy and Related Phenomena · doi:10.1016/0368-2048(76)80025-4 · Cited by 588
Cited by
Determination of the V2p XPS binding energies for different vanadium oxidation states (V5+ to V0+)
Silversmit, G., Depla, D., Poelman, H., Marin, G. B., & De Gryse, R. (2004) · Journal of Electron Spectroscopy and Related Phenomena · doi:10.1016/j.elspec.2004.03.004 · Cited by 1,947
Resolving ruthenium: XPS studies of common ruthenium materials
Morgan, D. J. (2015) · Surface and Interface Analysis · doi:10.1002/sia.5852 · Cited by 1,199
Tuning the activity of Pt alloy electrocatalysts by means of the lanthanide contraction
Escudero-Escribano, M., Malacrida, P., Hansen, M. H., Vej-Hansen, U. G., Velázquez-Palenzuela, A., Tripkovic, V., Schiøtz, J., Rossmeisl, J., Stephens, I. E. L., & Chorkendorff, I. (2016) · Science · doi:10.1126/science.aad8892 · Cited by 1,057
Park, K.-W., Choi, J.-H., Kwon, B.-K., Lee, S.-A., Sung, Y.-E., Ha, H.-Y., Hong, S.-A., Kim, H., & Wieckowski, A. (2002) · The Journal of Physical Chemistry B · doi:10.1021/jp013168v · Cited by 845
Marco, J. F., Gancedo, J. R., Gracia, M., Gautier, J. L., Ríos, E., & Berry, F. J. (2000) · Journal of Solid State Chemistry · doi:10.1006/jssc.2000.8749 · Cited by 749
Xu, Z., Chen, L., Yang, G., Huang, C., Hou, J., Wu, Y., Li, G., Hsu, C., & Yang, Y. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801286 · Cited by 681
Hartmann, P., Leichtweiss, T., Busche, M. R., Schneider, M., Reich, M., Sann, J., Adelhelm, P., & Janek, J. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp4051275 · Cited by 523
Wang, Y., Lai, Y., Song, L., Zhou, Z., Liu, J., Wang, Q., Yang, X., Chen, C., Shi, W., Zheng, Y., et al. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201503159 · Cited by 457
XPS study of some calcium compounds
Demri, B., & Muster, D. (1995) · Journal of Materials Processing Technology · doi:10.1016/0924-0136(95)02023-3 · Cited by 434
Plasma treatment of polydimethylsiloxane
Owen, M. J., & Smith, P. J. (1994) · Journal of Adhesion Science and Technology · doi:10.1163/156856194x00942 · Cited by 410
Enhanced TiO2 photocatalysis by Cu in hydrogen production from aqueous methanol solution
WU, N. (2004) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2004.02.013 · Cited by 334
“Quantitative analysis [16] considering only the 6rst three elements gave a Cu content of 1.”
BackgroundLiang, Q., Yao, X., Wang, W., Liu, Y., & Wong, C. P. (2011) · ACS Nano · doi:10.1021/nn200181e · Cited by 320
Payne, B. P., Biesinger, M. C., & McIntyre, N. S. (2012) · Journal of Electron Spectroscopy and Related Phenomena · doi:10.1016/j.elspec.2012.06.008 · Cited by 308
Iodine Migration and Degradation of Perovskite Solar Cells Enhanced by Metallic Electrodes
Besleaga, C., Abramiuc, L. E., Stancu, V., Tomulescu, A. G., Sima, M., Trinca, L., Plugaru, N., Pintilie, L., Nemnes, G. A., Iliescu, M., et al. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b02375 · Cited by 305
Photoelectron Spectroscopy of Ionic Liquid-Based Interfaces
Lovelock, K. R. J., Villar-Garcia, I. J., Maier, F., Steinrück, H.-P., & Licence, P. (2010) · Chemical Reviews · doi:10.1021/cr100114t · Cited by 298
Kim, J. H., Choi, S. M., Nam, S. H., Seo, M. H., Choi, S. H., & Kim, W. B. (2008) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2008.01.011 · Cited by 295
Chen, J., Chen, X., Xu, W., Xu, Z., Chen, J., Jia, H., & Chen, J. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.07.147 · Cited by 285
Delamination of Layered Covalent Organic Frameworks
Berlanga, I., Ruiz‐González, M. L., González‐Calbet, J. M., Fierro, J. L. G., Mas‐Ballesté, R., & Zamora, F. (2011) · Small · doi:10.1002/smll.201002264 · Cited by 279
Pt Nanoparticle Binding on Functionalized Multiwalled Carbon Nanotubes
Hull, R. V., Li, L., Xing, Y., & Chusuei, C. C. (2006) · Chemistry of Materials · doi:10.1021/cm0518978 · Cited by 276
Rhim, Y.-R., Zhang, D., Fairbrother, D. H., Wepasnick, K. A., Livi, K. J., Bodnar, R. J., & Nagle, D. C. (2010) · Carbon · doi:10.1016/j.carbon.2009.11.020 · Cited by 267
An x‐ray photoelectron spectroscopic study of some chromium–oxygen systems
Desimoni, E., Malitesta, C., Zambonin, P. G., & Rivière, J. C. (1988) · Surface and Interface Analysis · doi:10.1002/sia.740130210 · Cited by 264
Chen, Z., Pronkin, S., Fellinger, T.-P., Kailasam, K., Vilé, G., Albani, D., Krumeich, F., Leary, R., Barnard, J., Thomas, J. M., et al. (2016) · ACS Nano · doi:10.1021/acsnano.5b04210 · Cited by 257
Damyanova, S., Pawelec, B., Arishtirova, K., Huerta, M. V. M., & Fierro, J. L. G. (2009) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2008.11.035 · Cited by 255
Naylor, C. H., Parkin, W. M., Ping, J., Gao, Z., Zhou, Y. R., Kim, Y., Streller, F., Carpick, R. W., Rappe, A. M., Drndić, M., et al. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b01342 · Cited by 222
“18 peak.(40) The reference energies for Mo 3d5/2 and the Te 3d5/2 peaks are 227.”
Massaro, C., Rotolo, P., De Riccardis, F., Milella, E., Napoli, A., Wieland, M., Textor, M., Spencer, N. D., & Brunette, D. M. (2002) · Journal of Materials Science: Materials in Medicine · doi:10.1023/a:1015170625506 · Cited by 216
Choi, C. H., Park, S. H., & Woo, S. I. (2011) · Green Chem. · doi:10.1039/c0gc00384k · Cited by 199
Vasilopoulou, M., Soultati, A., Georgiadou, D. G., Stergiopoulos, T., Palilis, L. C., Kennou, S., Stathopoulos, N. A., Davazoglou, D., & Argitis, P. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta13975a · Cited by 197
The Role of Adsorbed CN and Cl on an Au Electrode for Electrochemical CO2 Reduction
Cho, M., Song, J. T., Back, S., Jung, Y., & Oh, J. (2018) · ACS Catalysis · doi:10.1021/acscatal.7b03449 · Cited by 127
Quiñones, D. H., Rey, A., Álvarez, P. M., Beltrán, F. J., & Plucinski, P. K. (2014) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2013.07.005 · Cited by 96
Martin-Martinez, M., Álvarez-Montero, A., Gómez-Sainero, L. M., R.T.Baker, Palomar, J., Omar, S., Eser, S., & Rodriguez, J. J. (2015) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2014.07.017 · Cited by 56
Metadata
- Authors
- Wagner, C. D., Davis, L. E., Zeller, M. V., Taylor, J. A., Raymond, R. H., & Gale, L. H.
- Venue
- Surface and Interface Analysis
- Publisher
- Wiley
- Published
- 1981-10
- Volume
- 3
- Issue
- 5
- Pages
- 211-225
- ISSN
- 0142-2421 (ISSN-L)
- 1096-9918
- OpenAlex
- W2004239068
- Cited by
- 2,075
- References
- 5
- FWCI
- 11.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.