The DOI matches its Crossref record; 104 of the 104 references it cites were found in a registry or an index.
A comprehensive review on metallic implant biomaterials and their subtractive manufacturing
Open accessAbstract
There is a tremendous increase in the demand for converting biomaterials into high-quality industrially manufactured human body parts, also known as medical implants. Drug delivery systems, bone plates, screws, cranial, and dental devices are the popular examples of these implants - the potential alternatives for human life survival. However, the processing techniques of an engineered implant largely determine its preciseness, surface characteristics, and interactive ability with the adjacent tissue(s) in a particular biological environment. Moreover, the high cost-effective manufacturing of an implant under tight tolerances remains a challenge. In this regard, several subtractive or additive manufacturing techniques are employed to manufacture patient-specific implants, depending primarily on the required biocompatibility, bioactivity, surface integrity, and fatigue strength. The present paper reviews numerous non-degradable and degradable metallic implant biomaterials such as stainless steel (SS), titanium (Ti)-based, cobalt (Co)-based, nickel-titanium (NiTi), and magnesium (Mg)-based alloys, followed by their processing via traditional turning, drilling, and milling including the high-speed multi-axis CNC machining, and non-traditional abrasive water jet machining (AWJM), laser beam machining (LBM), ultrasonic machining (USM), and electric discharge machining (EDM) types of subtractive manufacturing techniques. However, the review further funnels down its primary focus on Mg, NiTi, and Ti-based alloys on the basis of the increasing trend of their implant applications in the last decade due to some of their outstanding properties. In the recent years, the incorporation of cryogenic coolant-assisted traditional subtraction of biomaterials has gained researchers’ attention due to its sustainability, environment-friendly nature, performance, and superior biocompatible and functional outcomes fitting for medical applications. However, some of the latest studies reported that the medical implant manufacturing requirements could be more remarkably met using the non-traditional subtractive manufacturing approaches. Altogether, cryogenic machining among the traditional routes and EDM among the non-traditional means along with their variants, were identified as some of the most effective subtractive manufacturing techniques for achieving the dimensionally accurate and biocompatible metallic medical implants with significantly modified surfaces.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Gupta, M. K., Sood, P. K., & Sharma, V. S. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.06.184 · Cited by 207
RetractedTi based biomaterials, the ultimate choice for orthopaedic implants – A review
Geetha, M., Singh, A. K., Asokamani, R., & Gogia, A. K. (2009) · Progress in Materials Science · doi:10.1016/j.pmatsci.2008.06.004 · Cited by 5,416
Self-citationState of the art electrical discharge machining (EDM)
Ho, K. H., & Newman, S. T. (2003) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(03)00162-7 · Cited by 1,729
A Review on Biomedical Titanium Alloys: Recent Progress and Prospect
Zhang, L., & Chen, L. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201801215 · Cited by 1,100
Dubey, A. K., & Yadava, V. (2007) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2007.10.017 · Cited by 888
Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids
Shokrani, A., Dhokia, V., & Newman, S. T. (2012) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2012.02.002 · Cited by 859
Gittens, R. A., McLachlan, T., Olivares-Navarrete, R., Cai, Y., Berner, S., Tannenbaum, R., Schwartz, Z., Sandhage, K. H., & Boyan, B. D. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.01.029 · Cited by 827
Review of ultrasonic vibration-assisted machining in advanced materials
Yang, Z., Zhu, L., Zhang, G., Ni, C., & Lin, B. (2020) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2020.103594 · Cited by 756
The aging of Wolff’s “law”: Ontogeny and responses to mechanical loading in cortical bone
Pearson, O. M., & Lieberman, D. E. (2004) · American Journal of Physical Anthropology · doi:10.1002/ajpa.20155 · Cited by 745
Biomaterials in total joint replacement
Katti, K. S. (2004) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2003.12.002 · Cited by 637
Biomedical Applications of Shape Memory Alloys
Petrini, L., & Migliavacca, F. (2011) · Journal of Metallurgy · doi:10.1155/2011/501483 · Cited by 585
Modern biomaterials: a review—bulk properties and implications of surface modifications
Roach, P., Eglin, D., Rohde, K., & Perry, C. C. (2007) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-006-0064-3 · Cited by 562
Critical overview of Nitinol surfaces and their modifications for medical applications
Shabalovskaya, S. A., Anderegg, J. W., & Humbeeck, J. V. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.01.013 · Cited by 548
Implant Surface Roughness and Bone Healing: a Systematic Review
Shalabi, M. M., Gortemaker, A., Hof, M. A. V., Jansen, J. A., & Creugers, N. H. J. (2006) · Journal of Dental Research · doi:10.1177/154405910608500603 · Cited by 531
The Williams Dictionary of Biomaterials
Williams, D. F. (1999) · Liverpool University Press eBooks · doi:10.5949/upo9781846314438 · Cited by 517
Klocke, F. (2011) · RWTHedition · doi:10.1007/978-3-642-11979-8 · Cited by 452
New cooling approach and tool life improvement in cryogenic machining of titanium alloy Ti-6Al-4V
Hong, S. Y., Markus, I., & Jeong, W.-C. (2001) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(01)00041-4 · Cited by 444
Cooling approaches and cutting temperatures in cryogenic machining of Ti-6Al-4V
Hong, S. Y., & Ding, Y. (2001) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(01)00026-8 · Cited by 409
Laser beam machining (LBM), state of the art and new opportunities
Meijer, J. (2004) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2004.02.003 · Cited by 406
General review of titanium toxicity
Kim, K. T., Eo, M. Y., Nguyen, T. T. H., & Kim, S. M. (2019) · International Journal of Implant Dentistry · doi:10.1186/s40729-019-0162-x · Cited by 404
Biological responses to physicochemical properties of biomaterial surface
Rahmati, M., Silva, E. A., Reseland, J. E., A. Heyward, C., & Haugen, H. J. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00103a · Cited by 391
Hänzi, A. C., Gerber, I., Schinhammer, M., Löffler, J. F., & Uggowitzer, P. J. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.10.008 · Cited by 365
Smart Packaging: Opportunities and Challenges
Schaefer, D., & Cheung, W. M. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.03.240 · Cited by 365
Cranial reconstruction: 3D biomodel and custom-built implant created using additive manufacturing
Jardini, A. L., Larosa, M. A., Filho, R. M., Zavaglia, C. A. D. C., Bernardes, L. F., Lambert, C. S., Calderoni, D. R., & Kharmandayan, P. (2014) · Journal of Cranio-Maxillofacial Surgery · doi:10.1016/j.jcms.2014.07.006 · Cited by 350
Mechanical milling/alloying of intermetallics
Koch, C. C., & Whittenberger, J. D. (1996) · Intermetallics · doi:10.1016/0966-9795(96)00001-5 · Cited by 350
Biomedical production of implants by additive electro-chemical and physical processes
Bartolo, P., Kruth, J.-P., Silva, J., Levy, G., Malshe, A., Rajurkar, K., Mitsuishi, M., Ciurana, J., & Leu, M. (2012) · CIRP Annals · doi:10.1016/j.cirp.2012.05.005 · Cited by 321
Shokrani, A., Dhokia, V. G., & Newman, S. T. (2016) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2015.12.002 · Cited by 316
Mechanical properties of magnesium alloys for medical application: A review
Chen, J., Tan, L., Yu, X., Etim, I. P., Ibrahim, M., & Yang, K. (2018) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2018.07.022 · Cited by 314
Orthopedic implants and devices for bone fractures and defects: Past, present and perspective
Kim, T., See, C. W., Li, X., & Zhu, D. (2020) · Engineered Regeneration · doi:10.1016/j.engreg.2020.05.003 · Cited by 307
Niinomi, M. (2008) · Journal of Artificial Organs · doi:10.1007/s10047-008-0422-7 · Cited by 295
Security and privacy issues in implantable medical devices: A comprehensive survey
Camara, C., Peris-Lopez, P., & Tapiador, J. E. (2015) · Journal of Biomedical Informatics · doi:10.1016/j.jbi.2015.04.007 · Cited by 293
Ezugwu, E. O., Da Silva, R. B., Bonney, J., & Machado, Á. R. (2005) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2004.11.027 · Cited by 249
Biodegradable Magnesium Alloys Developed as Bone Repair Materials: A Review
Liu, C., Ren, Z., Xu, Y., Pang, S., Zhao, X., & Zhao, Y. (2018) · Scanning · doi:10.1155/2018/9216314 · Cited by 246
Hybrid cryogenic MQL for improving tool life in machining of Ti-6Al-4V titanium alloy
Shokrani, A., Al-Samarrai, I., & Newman, S. T. (2019) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2019.05.006 · Cited by 241
Pimenov, D. Y., Mia, M., Gupta, M. K., Machado, A. R., Tomaz, Í. V., Sarikaya, M., Wojciechowski, S., Mikolajczyk, T., & Kapłonek, W. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.01.031 · Cited by 241
Su, Y., He, N., Li, L., & Li, X. L. (2006) · Wear · doi:10.1016/j.wear.2006.01.013 · Cited by 240
Pu, Z., Outeiro, J. C., Batista, A. C., Dillon, O. W., Puleo, D. A., & Jawahir, I. S. (2011) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2011.12.006 · Cited by 235
Kaynak, Y., Karaca, H. E., Noebe, R. D., et al. (2013) · Wear · doi:10.1016/j.wear.2013.05.011 · Cited by 233
Xue, T., Attarilar, S., Liu, S., Liu, J., Song, X., Li, L., Zhao, B., & Tang, Y. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.603072 · Cited by 228
Ezugwu, E. O., Bonney, J., Da Silva, R. B., & Çakir, O. (2007) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2006.08.005 · Cited by 217
Damiati, L., Eales, M. G., Nobbs, A. H., Su, B., Tsimbouri, P. M., Salmeron-Sanchez, M., & Dalby, M. J. (2018) · Journal of Tissue Engineering · doi:10.1177/2041731418790694 · Cited by 216
Analysis of ultrasonic-assisted drilling of Ti6Al4V
Pujana, J., Rivero, A., Celaya, A., & López de Lacalle, L. N. (2009) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2008.12.014 · Cited by 213
Key terminology in biomaterials and biocompatibility
Ghasemi-Mobarakeh, L., Kolahreez, D., Ramakrishna, S., & Williams, D. (2019) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2019.02.004 · Cited by 210
Performance of coated- and uncoated-carbide tools when drilling titanium alloy—Ti–6Al4V
Sharif, S., & Rahim, E. A. (2007) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2006.03.142 · Cited by 201
Metals for bone implants: safety, design, and efficacy
Shayesteh Moghaddam, N., Taheri Andani, M., Amerinatanzi, A., Haberland, C., Huff, S., Miller, M., Elahinia, M., & Dean, D. (2016) · Biomanufacturing Reviews · doi:10.1007/s40898-016-0001-2 · Cited by 184
The performance of CBN tools in the machining of titanium alloys
Zoya, Z. A., & Krishnamurthy, R. (2000) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(99)00464-1 · Cited by 179
Medical devices biomaterials – A review
Festas, A., Ramos, A. M., & Davim, J. P. (2019) · Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications · doi:10.1177/1464420719882458 · Cited by 174
Liu, Z., An, Q., Xu, J., Chen, M., & Han, S. (2013) · Wear · doi:10.1016/j.wear.2013.02.001 · Cited by 172
Courbon, C., Pusavec, F., Dumont, F., Rech, J., & Kopac, J. (2013) · Tribology International · doi:10.1016/j.triboint.2013.04.010 · Cited by 170
Brief Overview on Nitinol as Biomaterial
Wadood, A. (2016) · Advances in Materials Science and Engineering · doi:10.1155/2016/4173138 · Cited by 162
Thermal analysis during turning of AZ31 magnesium alloy under dry and cryogenic conditions
Danish, M., Ginta, T. L., Habib, K., Carou, D., Rani, A. M. A., & Saha, B. B. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9893-5 · Cited by 161
Recent advances in turning with textured cutting tools: A review
Sharma, V., & Pandey, P. M. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.07.138 · Cited by 158
Milling of titanium alloy with cryogenic cooling and minimum quantity lubrication (MQL)
Park, K. H., Suhaimi, M. A., Yang, G.-D., et al. (2017) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-017-0001-z · Cited by 150
Bulk Metallic Glasses for Implantable Medical Devices and Surgical Tools
Meagher, P., O’Cearbhaill, E. D., Byrne, J. H., & Browne, D. J. (2016) · Advanced Materials · doi:10.1002/adma.201505347 · Cited by 149
Compound machining of titanium alloy by super high speed EDM milling and arc machining
Wang, F., Liu, Y., Zhang, Y., et al. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.10.015 · Cited by 140
Fukuda, A., Takemoto, M., Saito, T., Fujibayashi, S., Neo, M., Yamaguchi, S., Kizuki, T., Matsushita, T., Niinomi, M., Kokubo, T., et al. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.09.026 · Cited by 134
State of the art of tool texturing in machining
Machado, Á. R., da Silva, L. R. R., de Souza, F. C. R., Davis, R., Pereira, L. C., Sales, W. F., de Rossi, W., & Ezugwu, E. O. (2021) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2021.117096 · Cited by 130
Self-citationA comprehensive review on additive manufacturing of medical devices
da Silva, L. R. R., Sales, W. F., Campos, F. D. A. R., de Sousa, J. A. G., Davis, R., Singh, A., Coelho, R. T., & Borgohain, B. (2021) · Progress in Additive Manufacturing · doi:10.1007/s40964-021-00188-0 · Cited by 127
Self-citationPowder mixed-EDM for potential biomedical applications: A critical review
Al-Amin, M., Rani, A. M. A., Aliyu, A. A. A., et al. (2020) · Materials and Manufacturing Processes · doi:10.1080/10426914.2020.1779939 · Cited by 125
Khan, W., Muntimadugu, E., Jaffé, M., & Domb, A. J. (2013) · Advances in delivery science and technology · doi:10.1007/978-1-4614-9434-8_2 · Cited by 122
Performance of cryogenically treated tungsten carbide tools in milling operations
Yong, A. Y. L., Seah, K. H. W., & Rahman, M. (2006) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-005-0379-0 · Cited by 120
Pulsed Nd:YAG laser cutting of NiTi shape memory alloys—Influence of process parameters
Pfeifer, R., Herzog, D., Hustedt, M., & Barcikowski, S. (2010) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.07.004 · Cited by 119
Aliyu, A. A. A., Rani, A. M. A., Ginta, T. L., Prakash, C., Axinte, E. M., Razak, M. A. A., & Ali, S. (2017) · Advances in Materials Science and Engineering · doi:10.1155/2017/8723239 · Cited by 114
Hong, S. Y., Ding, Y., & Jeong, J. (2002) · Machining Science and Technology · doi:10.1081/mst-120005958 · Cited by 111
Chemistry of biomaterials: future prospects
Kargozar, S., Ramakrishna, S., & Mozafari, M. (2019) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2019.07.003 · Cited by 107
High speed cryogenic finish machining of Ti - 6Al4V with polycrystalline diamond tools
Schoop, J., Sales, W. F., & Jawahir, I. S. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.07.002 · Cited by 100
Bio-Functional Design, Application and Trends in Metallic Biomaterials
Yang, K., Zhou, C., Fan, H., Fan, Y., Jiang, Q. Y., Song, P., Fan, H., Chen, Y., & Zhang, X. (2017) · International Journal of Molecular Sciences · doi:10.3390/ijms19010024 · Cited by 96
Powder mixed electrical discharge machining for antibacterial coating on titanium implant surfaces
Bui, V. D., Mwangi, J. W., & Schubert, A. (2019) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2019.05.032 · Cited by 94
Biomaterials Science: An Evolving, Multidisciplinary Endeavor
Ratner, B. D., Hoffman, A. S., Schöen, F. J., & Lemons, J. E. (2012) · Elsevier eBooks · doi:10.1016/b978-0-08-087780-8.00153-4 · Cited by 92
Intraosseous metal implants in orthopedics: A review
Rony, L., Lancigu, R., & Hubert, L. (2018) · Morphologie · doi:10.1016/j.morpho.2018.09.003 · Cited by 89
Performance analysis of cryogenically treated coated carbide inserts
Vadivel, K., & Rudramoorthy, R. (2008) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-008-1597-z · Cited by 87
A biocompatible ionic liquid as an antiwear additive for biodegradable lubricants
Khemchandani, B., Somers, A. E., Howlett, P. C., Jaiswal, A. K., Sayanna, E., & Forsyth, M. (2014) · Tribology International · doi:10.1016/j.triboint.2014.04.016 · Cited by 85
Kaynak, Y., & Kıtay, Ö. (2018) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp2020036 · Cited by 84
Energy conscious cryogenic machining of Ti-6Al-4V titanium alloy
Shokrani, A., Dhokia, V. G., & Newman, S. T. (2016) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1177/0954405416668923 · Cited by 81
Bui, V. D., Mwangi, J. W., Meinshausen, A.-K., et al. (2019) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2019.125254 · Cited by 80
Dogra, M., Sharma, V. S., Sachdeva, A. K., Suri, N. M., & Dureja, J. S. (2011) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3320-8 · Cited by 77
Mechanical behaviors and biomedical applications of shape memory materials: A review
Wen, C., Yu, X., Zeng, W., Zhao, S., Wang, L., Wan, G., Huang, S., Grover, H., Chen, Z., & equally, †. T. T. A. C. (2018) · AIMS Materials Science · doi:10.3934/matersci.2018.4.559 · Cited by 76
Active agents, biomaterials, and technologies to improve biolubrication and strengthen soft tissues
Cooper, B. G., Bordeianu, C., Nazarian, A., Snyder, B. D., & Grinstaff, M. W. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.07.040 · Cited by 75
Comparative investigation on using cryogenic machining in CNC milling ofTi-6Al-4Vtitanium alloy
Shokrani, A., Dhokia, V. G., & Newman, S. T. (2016) · Machining Science and Technology · doi:10.1080/10910344.2016.1191953 · Cited by 72
Surface modification of TiNi-based shape memory alloys by dry electrical discharge machining
Huang, T.-S., Hsieh, S.-F., Chen, S.-L., et al. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.02.025 · Cited by 70
Kaynak, Y., Karaca, H. E., & Jawahir, I. S. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-1247-6 · Cited by 69
Mitsuishi, M., Cao, J., Bártolo, P., Friedrich, D., Shih, A. J., Rajurkar, K. P., Sugita, N., & Harada, K. (2013) · CIRP Annals · doi:10.1016/j.cirp.2013.05.001 · Cited by 69
Developments in cutting tool technology in improving machinability of Ti6Al4V alloy: A review
Saini, A., Pabla, B., & Dhami, S. (2016) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1177/0954405416640176 · Cited by 67
Bioinert Metals (Stainless Steel, Titanium, Cobalt Chromium)
Goharian, A., & Abdullah, M. R. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-804634-0.00007-0 · Cited by 52
State of the art in processing of shape memory alloys with electrical discharge machining: A review
Singh, R., Singh, R. P., & Trehan, R. (2020) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1177/0954405420958771 · Cited by 52
Experimental study on chip deformation of Ti-6Al-4V titanium alloy in cryogenic cutting
Zhao, W., Gong, L., Ren, F. Y., Li, L., Xu, Q. Z., & Khan, A. M. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-1890-4 · Cited by 50
Tanzi, M. C., Farè, S., & Candiani, G. (2019) · Elsevier eBooks · doi:10.1016/b978-0-08-101034-1.00004-9 · Cited by 46
Chilled Air System and Size Effect in Micro-milling of Nickel−Titanium Shape Memory Alloys
Zailani, Z. A., Mativenga, P. T., & Harrison, G. (2019) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-019-00040-5 · Cited by 43
Wear behaviour of PVD coated and cryogenically treated tools for Ti-6Al-4V turning
Strano, M., Albertelli, P., Chiappini, E., & Tirelli, S. (2015) · International Journal of Material Forming · doi:10.1007/s12289-014-1215-6 · Cited by 42
Polini, W., & Turchetta, S. (2014) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1177/0954405414558732 · Cited by 42
Curve micromachining on the edges of nitinol biliary stent by ultrashort pulses laser
Hung, C., & Chang, F. (2016) · Optics & Laser Technology · doi:10.1016/j.optlastec.2016.10.018 · Cited by 41
Increasing efficiency of Ti-alloy machining by cryogenic cooling and using ethanol in MRF
Krishnamurthy, G., Bhowmick, S., Altenhof, W., & Alpas, A. T. (2017) · CIRP journal of manufacturing science and technology · doi:10.1016/j.cirpj.2017.01.001 · Cited by 36
Davis, R., Singh, A., Debnath, K., Sabino, R. M., Popat, K. C., da Silva, L. R. R., Junior, P. C. S., & Machado, Á. R. (2021) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2021.127725 · Cited by 34
Self-citationDual-topography electrical discharge machining of titanium to improve biocompatibility
Lee, B. E. J., Ho, S., Mestres, G., Ott, M. K., Koshy, P., & Grandfield, K. (2016) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2016.04.024 · Cited by 26
Controlling corrosion rate of Magnesium alloy using powder mixed electrical discharge machining
Razak, M. A. A., Rani, A. M. A., Saad, M. N. M., Littlefair, G., & Aliyu, A. A. A. (2018) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/344/1/012010 · Cited by 23
Laser micromachining of titanium alloy in water and ice at different temperatures
Wuttisarn, T., Tangwarodomnukun, V., & Dumkum, C. (2019) · Optics & Laser Technology · doi:10.1016/j.optlastec.2019.106024 · Cited by 21
Abellán-Nebot, J. V., Siller, H. R., Vila, C., et al. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-3955-0 · Cited by 18
Davis, R., Singh, A., Sabino, R. M., Pereira, R. B. D., Popat, K. C., Junior, P. C. S., & Jackson, M. J. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.09.052 · Cited by 18
Self-citationde Assis, C. L. F., Mecelis, G. R., & Coelho, R. T. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-05710-2 · Cited by 17
Self-citationGosai, N., & Joshi, A. Y. (2016) · Journal for Manufacturing Science and Production · doi:10.1515/jmsp-2015-0013 · Cited by 16
Štěpanovská, J., Matějka, R., Otáhal, M., Rosina, J., & Bačáková, L. (2020) · Coatings · doi:10.3390/coatings10080762 · Cited by 16
Surgical and Radiotherapeutic Management of Malignant Extradural Spinal Cord Compression
Loblaw, A., George, K. J., & Misra, V. (2020) · Clinical Oncology · doi:10.1016/j.clon.2020.07.022 · Cited by 12
Klocke, F., Michailidis, N., Bouzakis, K. ‐., Witty, M., Gerardis, S., Lili, E., & Pappa, M. (2010) · Production Engineering · doi:10.1007/s11740-010-0235-4 · Cited by 10
Prevention of Device Infection: New Implantable Devices
Deharo, J., & Martignani, C. (2020) · Springer eBooks · doi:10.1007/978-3-030-46255-0_10 · Cited by 2
Cited by
Bisphosphonate-incorporated coatings for orthopedic implants functionalization
Zhang, J., Bai, H., Bai, M., Wang, X., Li, Z., Xue, H., Wang, J., Cui, Y., Wang, H., Wang, Y., et al. (2023) · Materials Today Bio · doi:10.1016/j.mtbio.2023.100737 · Cited by 22
Metadata
- Authors
- Davis, R., Singh, A., Jackson, M. J., Coelho, R. T., Prakash, D., Charalambous, C. P., Ahmed, W., da Silva, L. R. R., & Lawrence, A. A.
- Venue
- The International Journal of Advanced Manufacturing Technology
- Published
- 2022-02-23
- Volume
- 120
- Issue
- 3-4
- Pages
- 1473-1530
- ISSN
- 0268-3768 (ISSN-L)
- 1433-3015
- OpenAlex
- W4213452490
- Cited by
- 380
- References
- 104
- FWCI
- 19.41
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.